Boat electric screwdriver how to make. Features of the manufacture of the screw part

Electric screwdriver for ice discovery, which tool to choose and how to finalize the screw

If you look for a really high.Quality and productive electric screwdriver for good winter fishing, then you are recommended to pay attention to several primary characteristics of this tool. Voltage and battery capacity

Based on the alleged loads, it is necessary to choose options with a capacity of 12 to 36 V. The direct load depends on the level of the thickness of the ice layer. The voltage affects the speed of rotation of the working element of the device. Options with a high value are characterized by easier and more convenient operation, even if we are talking about drilling a very thick ice layer

Voltage and battery capacity. Based on the alleged loads, it is necessary to choose options with a capacity of 12 to 36 V. The direct load depends on the level of the thickness of the ice layer. The voltage affects the speed of rotation of the working element of the device. Options with a high value are characterized by easier and more convenient operation, even if we are talking about drilling a very thick ice layer.

  • Torque. This is another important characteristic of an electric screwdriver. It affects the level of strength of the material that can overcome the tool. Ideal wiping values ​​are 40–80 nm. The larger this value, the easier it will make the holes in a strong and thick surface of the ice.
  • Manufacturer. Buy a high.Quality corporate Electric screwdriver for the icebore. Even if not the lowest cost does not scare you. Cheap devices can be unreliable and quickly fail. Contact the purchase of such goods only to specialized stores. You do not need to purchase them in the markets and street shops, because such copies are unlikely to please you with an effective work.

Which ice car to choose under a screwdriver

For self.Manufacture of ice discovery with a screwdriver, most hand models with a removable handle or individual screws are suitable. Some models of imported manufacturers are adapted for connecting with a power tool: for example, the products of the Swedish plant Mora. As a worthy budget alternative, the swords of the domestic brand Tonar are suitable

, intended for automatic drilling. Models of this brand are represented by customers on the pages of the catalog of the Trofey online store.

Experienced fishermen advise taking a tool of right rotation so that the cartridge nut does not promote during drilling. Swings with left.Sided rotation can be drilled on a reverse, but as far as the screwdriver is enough in this mode is unknown. It is unknown.

The optimal length of the driller drill is 100-130 cm, for drilling thicker ice you can purchase an extension nozzle on the ice drift. It is impractical to buy a large screw of a large size. It increases the load on the tool and quickly disables it.

The battery electric screwdriver should operate at a voltage of at least 18 V, and torque is needed from 40 to 80 nm. Often on one fishing you have to change space several times, which means that the battery capacity should be about 3 a/h. For convenience, it is better to choose an electric screwdriver with an additional pen near the cartridge. If it is not, then you will have to add on your own.

How to create an ice car from a trimmer for grass with your own hands

Another device that can be adapted to an automatic drill is a trimmer for grass. It is a fairly simple device in operation. Its equipment includes an elongated handle, an engine, a specialized head for a forest, which goes to torque.

When creating an ice car from a trimmer for grass with your own hands, you need to prepare the following elements:

The main problem that will need to be solved is how to fix the owl of the ice discovery on the head for the forest. As soon as it is possible to find a solution to docking two mechanisms, the fishermen will receive an excellent device for drilling holes. By the way, another option is to turn the Yamobur from the ice discovery with your own hands. Constructively between these devices there are no fundamental differences.

  • After using the drill, it is advisable to wipe the dry. The procedure is necessary even if there is an anti.Corrosion coating.
  • Store in a special case. Dense fabric with grooves for ventilation.
  • In the summer, lubricate the legs (thin layer) of the legs.
  • It is forbidden to knock down snow, ice from knives. This will lead to dullness.
  • Grease a folding drill with machine oil, in order to avoid jamming.
  • A shaken nut needs to be replaced immediately.
  • The shown scratches must be painted over so that corrosion does not appear.
  • When drilling the hole, it is necessary to evenly distribute the load. It is important to consider the thickness of the Luda, the speed of rotation of the tool.The success of the quick, high.Quality drilling of the hole depends on the chosen model of the screw and the technical characteristics of the electrical screwdriver (GaikoVERT).
See also  Rotary mower which one to choose. The appointment of mowers for MTZ

Satisfaction on the work of an independently assembled drill will depend on the correct assembly of the design in compliance with all the rules.Fishing is a vacation, pleasure and excitement.

electric, screwdriver, make, manufacture, screw, part

Iceobur finalization with an electric screwdriver

Bait

Today we offer the topic: “Finalization of the ice drill with electric screwdriver” from professional fishermen. We tried to reveal the topic as fully as possible. You can ask all questions in the Комментарии и мнения владельцев after the article.

Some methods of fishing in winter involve the constant movement of the fisherman through the water area and the drilling of holes. Even with well.Sharpened knives for a day of fishing, you can help out strongly, especially if you have to drill a thick ice cover. An electric screwdriver for ice discovery can facilitate the situation, which allows you to absolutely not make efforts and, accordingly, less tired and enjoy being in the pond.

Today, drills are sold on the market, which are originally adapted for connecting with an electric screwdriver. These are the products of the Swedish company “Mora”. Some craftsmen adapt domestic products, leaving a screw and cutting the handle.

Automated homemade ice drift with an electric screwdriver has a number of advantages over purchased:

  • It is very easy and simple to improve the usual drill in this way.
  • It is much cheaper to join the electric screwdriver than to purchase a factory specialized ice drift.
  • All work will require a minimum of tools and materials.

As a result, we get an excellent automated ice drift, the work of which can be enjoyed at each exit on the ice.

electric, screwdriver, make, manufacture, screw, part

In order for the ice to be able to drill any ice in the thickness of the ice, it is necessary to choose an electric screwdriver with high power. A weak tool will not be able to properly drill the hole in the thick ice cover.

Naturally, for our purposes, only a battery tool is used, which does not require a constant connection to the electrical network. Must have an electric screwdriver should have good physical strength and reliability. He must withstand various loads, possible blows and other troubles that wait for him on fishing.

An electric screwdriver for ice discovery should have the following characteristics:

  • Torque about 80–90 nm. In general, the higher this indicator, the easier the tool will cope with dry and thick ice.
  • The voltage of the battery is 18–36 in. The higher this parameter, the more powerful and efficient the electric screwdriver is considered, it is easier for them to drill ice cover.
  • Battery capacity of at least 2.5 ah, and preferably up to 4 ah. The higher this value, the longer the tool will work without recharging.

Good screwdrivers that are suitable for ice blocks are produced by Japanese companies Makita and Metabo. Although you can use any other brands that meet the specified parameters.

Today, screwdrivers are equipped with two types of batteries:

  • Lithi-ion (Li-Ion) has small weight, quickly charges, but “not friends” with low temperatures. A tool with such a battery is expensive.
  • Nickel-cadmium (Ni-CD) weighs a lot, but is able to work at temperatures up to –150 degrees.

Be sure to take two batteries with you with you on the reservoir. They should be stored in warmth, for example, in the inner of the jacket. While one works, the second should not be in the cold.

Of course, not only an electric screwdriver will be made to create an automated ice discovery with your own hands. You can use other “twisting” power tools:

The latter, by the way, does not work from the battery, but from a technical point of view it is difficult to implement such an idea.

Not every ice drift can be adapted to an electric screwdriver. Domestic products are not suitable, since they rotate in one direction with the untwisting of the cartridge nut. As a result, it has to be squeezed all the time. Some craftsmen come out of this situation using a reducing gearbox. But not every fisherman will be able to make it.

It is best to make an ice drift from an electric screwdriver from foreign products. Almost all models of Mora can be adapted to the power tool. For them, an adapter gets in any store, which allows you to reliably connect the cartridge to the screw.

Separately, you can note the model of the ice block “Mora Nova System”. The manufacturer allows the sale separately a screw with a replaceable cutting head, which is connected to an electric screwdriver. For drilling thick ice, you can buy a special extension cord.

See also  Is it possible to screw a self -tapping screw with an electric screwdriver. Fastening to dry plaster

For products of the Swedish company Mora, two types of adapters are offered:

You can still note adapters with a handle. They are more convenient to operate. The first is an adapter from Higashi with a diameter of 18 mm. Suitable for all Swedish drills and some domestic, for example, products from “Nero”. The second. Under the ice.Bears “Heinola Easyrun”, which also has a planting size 18 mm and is suitable for other products.

So, now, when all the elements necessary for the manufacture of ice.Block with an electric screwdriver are considered, you can start directly to the assembly. There is nothing complicated here when all the parts are at hand:

We connect the cartridge with a screw through the adapter. All. Automated ice drift from an electric screwdriver is ready.

As mentioned above, instead of battery electrical screwdriver, you can use a gaykovert. It is more expensive because this tool is produced only for professional use. But, it has a very strong case and is made of better materials, so it will last longer.

Power Full Electric Screw Driver कैसे बनाये || How To Make Rechargeable Screw Driver

6-a.Ru-the magic of love, love spells, lapels, conspiracies, signs, feng shui, meaning of the name, relationship, psychology, fortune-telling, tarot, runes and much more

  • Fortune.Telling on coffee grounds is one of the oldest methods of fortune telling, which originates in ancient.
  • Your chosen one has become cold in relation to you, before you have not noticed this after him. He often became in.
  • Runes and magic predictions have existed for a long time. They can give answers to a variety of questions. You in…
  • The relationship of people is a common topic that women want to reveal. Find in it answers to your.
  • There are people who have lived life and know a lot, know how to do and know answers to all life question.
  • Unique fortune.Telling on coffee grounds for the present and near future is popular in Ross.
  • Your meetings have become less and less. The beloved always comes up with excuses to disrupt your plans and not perch.
  • The system of amulets can tell you what awaits you. To tell you life changes, what.
  • Each name carries meaning, translates from other languages ​​and something means. Already one name MN.
  • You lived with a person, then he was replaced. Your quarrel led to parting. Now you are alone.
  • Eastern fortune.Telling on coffee grounds on a loved one is now available in the online version. This is the oldest g.
  • It happens that you live for many years, but still do not know about the attitude of the partner to your person. Most.
  • In the life of every person there are situations when you are looking for an answer in a dead end and you cannot find
  • You meet with a person, but have not completely bought him. You are interested in knowing what he thinks about in.
  • Different people have a different life. Everything is safe for some and they live without knowing troubles. Dr.

Fortune.Telling on coffee grounds is one of the oldest repaid methods that originates in the ancient East. After hundreds of years, fortune.Telling has not lost its popularity and to this day fortune.Telling on coffee is used by many

Your cute chosen one finds constant excuses, you may look at the other young ladies. Or maybe he lacks only your communication and he is looking for love on the side? We offer to make a fortune.Telling on our website.

Your beloved chosen one speaks and promises to get away from his wife. You are already tired of listening to his empty promises. Is there a courage in your chosen one, the spirit of determination? Or still the wife will prevail in your.

You are not yet in relations with the opposite sex, but you are already interested in the name of the future chosen one? Will it be Russian or will you bring you to a foreigner? By name, you can determine the character of a person, his nature.

You are lonely and you are already tired of coming to an empty apartment. Nobody meets you, does not hug you and does not say the warm words that you want to hear. There is no one to console you in sad minutes? All holidays you are alone.

Girls always strive in life to find out everything in advance. Fortune.Telling on the suicide is suitable for home conditions. How many girls had a partner before you? Are there any children from past relationships? Was it married? Is it ready.

There are so many names in the world and each has its own meaning. There are names that bear character in a person, courage, endurance, lack of fear, desire for change. There are names in which simple notes of everyday existence, they want to hide.

Favorite fortune.Telling for girls is a fortune telling for the groom. How it will be? Slender, beautiful? Low and chubby? Will he be well.Mannered? Trudenik? Sincere with you in a relationship? Will you trust your partner? Will there be in.

See also  Converting a 12v electric screwdriver to lithium

Which ice car to choose under a screwdriver

For self.Manufacture of ice discovery with a screwdriver, most hand models with a removable handle or individual screws are suitable. Some models of imported manufacturers are adapted for connecting with a power tool: for example, the products of the Swedish plant Mora. As a worthy budget alternative, the swords of the domestic brand Tonar are suitable

, intended for automatic drilling. Models of this brand are represented by customers on the pages of the catalog of the Trofey online store.

How Screwdrivers Are Made. Manufacturing Process.#32.

Experienced fishermen advise taking a tool of right rotation so that the cartridge nut does not promote during drilling. Swings with left.Sided rotation can be drilled on a reverse, but as far as the screwdriver is enough in this mode is unknown. It is unknown.

electric, screwdriver, make, manufacture, screw, part

The optimal length of the drill droplet is 100-130 cm, for drilling thicker ice you can purchase an extension nozzle for ice drift. It is impractical to buy a large screw of a large size. It increases the load on the tool and quickly disables it.

How to make an adapter and adapter for an electric screwdriver for ice discovery with your own hands?

With the help of an adapter, you can achieve a seething of the required number of holes. Also, such an accessory makes it possible to connect an electric screwdriver with a drill.The adapter can be bought in the store, or you can make it yourself. It is important to consider the diameters of the electric screwdriver-adapter.

The hexagonal part of the adapter is clamped in the cartridge of an electric screwdriver. You can use the M-shaped hexagonal key. This stops the scrolling of the screw.

The cylindrical part of the adapter in the process connects to the screw. To do this, using the drill, the hole in the cylinder is drilled. Using the bolt is fixed to the pipe of the screw.

It is also necessary to make a pen that will allow the adapter and protect the spiral part of the drill from falling into the water.

The large size of the worm tape will drill wide holes, but it will be quite heavy. Diameter 10-13 cm makes it possible to quickly make a hole and fish medium-sized fish. The most common option for ice discovery with such parameters.

Adapter with parameters: cylinder diameter 18 mm, a shank with a hexagonal shape, the presence of a stop is suitable for many manual icebores.

DIY adapter preparation

It is important to remember that the manufacture of an adapter depends on the characteristics of the drill. If the Swedish drill mora is used, then an adapter for ice discovery is suitable for a screwdriver of the following type:

  • For a standard model, a product with a diameter of 1.8 cm is required;
  • If the Mora Nova model is used, the diameter of the adapter should be 2.2 cm.
electric, screwdriver, make, manufacture, screw, part

There are also adapters with handles. They are easier to use during the drilling of ice. The adapter model with a diameter of 1.8 cm from Higashi goes well with all Swedish drills and some domestic products.

Care for the ice discovery

So that the ice ax serves you as long as possible, it is important to care for it in a timely manner. Here are a few rules that you should adhere to:

  • It is important to transport and store an ice ax in a special case of dense material.
  • For cleaning blades and a screw, it is unacceptable to use metal objects, stones, as this will ruin the cutting edge.
  • Upon completion of the fishing, the device must be wiped with a dry cotton rag.
  • If you remove the drill for long.Term storage, then it is important to treat the screws and knives with oil, you can even use the worked out machine.
  • Even an insignificant backlash in the design of the ice discovery must be removed immediately, otherwise this will lead to a breakdown of the entire structure.
  • The load on the electric screwdriver is distributed evenly, otherwise the electric screwdriver (even the highest quality and expensive) will break.
  • When the creation of the hole is suitable for completion, it is necessary to reduce the pressure on the ice drift in order to avoid staging the tool.
  • All scratches and chips are important to cover in time, so you protect the tool from corrosion.

We hope that our guide for the manufacture of an ice-block-ring with our own hands was intelligible and understandable. We wish you success in making!

| Denial of responsibility | Contacts |RSS