Can mortar be mixed with a hammer drill. How to mow without dust

Is it possible to stir mortar with a peorator

How to batch quality concrete electric mixer

  • Can be kneaded with any tool?
  • Why do we consider the peorator as a substitute for the mixer??
  • What are the attachments
  • Zubr Professional ZPM-40-1250 EVK
  • A burning question
  • Peorator with a mixer attachment
  • Recommended nozzles
  • The efficiency of this method
  • What else can be useful
  • Additional tips
  • How to make it with your own hands?
  • The attachment in 5 minutes
  • Using

Is it allowed to mow with any tool??

It is important to understand that the weaker the power tool, the harder it will work. If we are talking about using a drill, then it should be borne in mind that not every model is designed for this kind of load. For example, a 500 watt device is not capable of fully mixing the construction mixture. In intensive work, the motor of the drill will definitely fail. Such a tool should only be used for stirring very small volumes of mortar (about 10 liters) and for a short time. It is also important that it is not thick concrete, but putty, primer, or similar mixes.

Quite another thing is an electric drill with a powerful motor 1300 W, better 1500 W. Such model can quite cope with mixing mortar. However, you should still not overload the tool with high intensity of work, as well as try to knead too thick mass.

As for the application for kneading with a peorator, it is more reasonable solution. This tool is designed for heavier workloads and is equipped with a powerful drive unit. But it’s better to take frequent breaks when mixing concrete.

Why do we see the rotary drum as a substitute for a mixer??

First, the peorator is a tool that differs little from the mixer in its internal design. Indeed, both the mixer and the rotary tool are equipped with an electric motor, which generates torque on the shaft with a special purpose nozzle attached to it. Accordingly, all the main power characteristics of the mixer and the accelerator are tied to the characteristics of the electric motor.

Secondly, the accelerator is the most common power tool on construction sites and in rooms under repair. In addition, it is known that the peorator often performs several functions, among which we will be interested in the function of the drill, that is, the rotation of the shaft and nozzle without chiseling.

What nozzles there are

The choice of mixer-type nozzles is sufficient today, but it is not so easy to choose the best option for yourself, because mixers differ by:

No problem with a brand, as a whisk is not a complicated technique, where the brand of the manufacturer plays a major role, but it is more difficult to pick up the nozzle on the shank and the size of the basket.

Zubr Professional ZPM-40-1250 EVK

Advantages: price, power, high impact energy, preset speed, safety clutch, anti-vibration system.

ZPM-40-1250 is a simple and unpretentious worker. Let the low price does not deceive you: it is not a “typical Chinaman”, but quite decent and very reliable tool, which you can rely on. It perfectly copes with hard work on a construction site. The tool can not drill without impact, there is no reverse. But you can put up with these disadvantages, because the powerful motor (1250 W) allows you to cope with the destruction of concrete quickly and smartly. In terms of impact energy (10 Joules) it belongs to the class of very powerful tools. Safety coupling between gearbox and motor. Speed of operation can be adjusted by presetting the speed.

The tool is not at all light, so you must be physically strong to be able to work with the tool in outstretched arms. But the dual anti-vibration system (made in the form of a spring-loaded handle and counterweight) helps to cope with the load by absorbing some of the vibration energy generated during operation.

mortar, hammer, drill, dust

Geared motor has a chuck for SDS Max drill bits. The only drawback associated with the fastening system is the impossibility of free rotation of the accessories in the chuck (this is important when working with flat or flat chisels).

Peorator “Zubr” ZPM-40-1250 EVK. a reliable helper for builders involved in the installation of air conditioning systems or the dismantling of brick and concrete structures. Such a technique is not too shabby to buy for the crew, for which drilling and demolition of concrete is a daily job. For private persons who are planning to repair a house or an apartment on their own, the Zubr is interesting because its cost will be repaid after just one repair.

A thorny issue

So, according to the technical characteristics it is quite possible to mix the mortar with the peorator itself. But it is expensive and impractical. Still, you should not refuse the idea, it has a rational reason. Performing the task with the help of a peorator is quite possible, and even with minimal negative consequences. You only need to use the right nozzle.

Bosch Professional Safe Drilling Techniques

Mixer with a mixer attachment

To mix highly viscous solutions, it is worth stocking up on a special agitator with short blades. The smaller the tank, the smaller the diameter of the blades should be.

Attention! This will reduce the effectiveness of the tool, but for private use is fine.

Mixer with a mixer attachment is more convenient to use than stationary equipment. In the first case, it is possible to change the angle and depth of immersion. But it is worth taking into account a few peculiarities:

With heavy loads of viscous mortar, the electric motor quickly overheats, the protection system is triggered, and the tool shuts down. Increase the working time by additional cooling.

Recommended nozzles

We recommend attachments for mixing 120×600 mm SDS from STARTUL and whisk 120×600 mm M14 from GEPARD.

SDS Rotary Hammer Drill Comparison. Milwaukee VS Dewalt!

mortar, hammer, drill, dust

SDS STARTUL 120×600 mm mixer is a right-handed spiral and is suitable for drills and rotary drills with SDL-Plus connector. Recommended batter speed 600 rpm, suitable for all kinds of heavy and viscous mixtures (plasters, fillers, resins, concretes, etc.).

Mixing mortar with a peorator

Guys, can you mix a mortar feoratorom, is it rated for such loads ? Specifically, the Bosch GBH 2.26 or still have to get a drill or special. Mixer ?

serega99 wrote: Or should I get one? The special. mixer ?

It is clear that the better, but you do not want to spend extra money for one-time use. I wonder if the furnace will die or not.

serega99 wrote: I wonder if the furnace will die or not.

Sooner or later everything will die.For five years I’ve been mixing with a drill.True AEG.Then became a peom.Also an AEG. It is clearly not going to die. You might have a hitch because of the fastener.I’m gonna need some more.chuck with an adapter.It’s not a very sturdy unit.It will be loose.On mine, the system allows you to replace the whole chuck.

The price of the issue is 2400r.and then you’ll be kneading 24 hours a day. great machine “

Yes, I also have a D-16/1050P. It’s a great gizmo. But, redundant. You can get by with a cheap Chinese drill

Once or twice you can knead and peom. If you stir it all the time, the chuck probably won’t hold. Pe is not the cheapest tool

mihamaster wrote : Sooner or later everything dies.For five years I’ve been kneading with a drill.Really AEG.Then it became a peom.Also AEG. It’s not going to die. You might have a hitch because of the fastener.I’m gonna need some more.chuck through the adapter.It’s not a very strong unit.It’s going to be loose.On mine, the system allows you to replace the whole cartridge.

I have a quick change drill chuck, which can be put in place of the SDS chuck without an adapter. So there is a chance) I heard that “G” type pens with vertical motor live much longer than usual

And the point of paying 500.600R to throw away later.

serega99 wrote : I heard that “G” type pen with vertical motor lasts much longer than a normal one

A GOOD tool designed for hard work lasts a long time.I have a drill Ergomax already in its ninth year.Pe’s about that too.Technique has to work, not us dancing around it.If it breaks, we’ll buy a new one.

mortar, hammer, drill, dust

serega99 wrote: People, can you mix a mortar with this mixer, is it rated for such loads? ? Specifically, the Bosch GBH 2.26 or should I get a drill or a special one? mixer ?

Last year I had to fill in chinks in the screed after demolition of interior partitions, the only sane tool suitable for the role of a mixer was a Bosch GBH 2-26 DFR. It is not suitable for batching up dense cement-sand mixtures, because it lacks power, and has no normal speed regulation. With the work eventually did somehow cope with it, but after that I decided not to force the machine more such work, and myself in the future not to suffer, and bought in a nearby store mixer Zubr ZMR-1200E-1.

How to insert the drill bit?

Types of drill bit tips Peorators are available with one of three types of chucks (cam, quick-action, SDS system).

Most devices use the latter type, so we should consider the installation of the drill on its example.

To change and fix the drill in the device with the SDS system, act as follows:

SDS system is considered the most reliable, it allows the drill to be firmly fixed in the torch and significantly saves time when changing accessories. It is approved for use in low- to medium-power devices.

To use a drill with a usual cylindrical shank you have to buy a special adapter for the SDS system. When used as an electric drill with conventional drills.

Electric mixer vs. concrete mixer: real-world experience

The construction season is in full swing. Many self-builders wonder if it is possible to mix concrete with an electric mixer? From this article you will learn the answer to this question and make an informed choice as to what to buy. a mixer drill or a concrete mixer.

  • How to prepare a concrete mix with an electric mixer
  • The difference between mixing with a mixer and a concrete mixer
  • The process of mixing concrete with a mixer is shown in detail in a video
  • The pros and cons of mixing with a mixer drill

Preparation of concrete manually and with a mixer drill.

Household models have a pull handle in the form of a staple. the ring version. Professional models for work with heavy mixtures have a T-shaped handle. If the coating is anti-vibration and anti-slip, it makes the device more comfortable to use.

Completion also affects the choice of a suitable model. The set includes the bit and fixation device. There are different ways to attach the nozzle.

Threaded connection. The nozzle is screwed into the spindle with the upper part threaded. Used in professional tools, because it ensures a secure hold.

Cam chuck. It is used for drills. mixers and domestic power drills. Special wrench is used for the chuck. Suitable for liquid, light and medium viscosity solutions.

SDS connection. Suitable for gauges. The nozzle must have an appropriate design. For mixing glue, plaster and filler mortars.

FastFix quick-change chuck. System allows quick accessory changes in the same way as an electric screwdriver, but is not designed for frequent work with concrete mixtures. the faces of the chuck rub off. There is a risk of the chuck becoming loose in reverse.

Morse cone. The most reliable option, allows working with all types of compounds. Used on professional models.

In addition to buying the construction mixer itself, you need to take care of the choice of nozzles. Propeller stirrer suitable for liquid compositions. Vertical paddle attachment for mixing viscous and heavy mixtures.

left handed auger (moves the mix downwards) and right handed auger (moves the mix upwards) is used for plaster or cement based formulations and “light” concrete. The double-sided screw is designed for liquid and non-liquid mixtures. universal auger suitable for all types of mixes.

When choosing a construction mixer, proceed from the Spectra and the amount of work to be done. For repair work it is usually sufficient to purchase a domestic model, for construction it is recommended to buy a semi-professional mixer, choosing the tool with the best price to quality ratio.

Video “how to choose a construction mixer”:

When carrying out repair work, it is often necessary to use a variety of manual, automatic or semi-automatic operations: chiselling, drilling, polishing, grinding, cutting, welding, etc. д. It is known that for each repair operation there is a specialized tool.

It is not always necessary to perform these operations equally often: sometimes it happens that a particular repair operation is relatively rare or occurs only once at all. What to do then? Run out and buy the right building tool for a one-time use? To borrow from neighbors, acquaintances or friends “for a couple of days”? Of course there is a desire to use a tool that is already in use to replace a missing tool.

The most common tool used in repair and construction work is a peorator. This power tool is available to almost everyone who at least once in his life faced with the repair. On the other hand, one of the most seldom used tools today is a construction mixer designed for mixing various construction and repair mortars. The reason for its infrequent use in the repair industry is the generally low quantity of mortar (varnish, glue, etc.) to be stirred in a single operation. д.), in which it is quite possible to do without mechanization: stirring by hand.

There are, however, cases in which electromechanical stirring is justified: very viscous media, large volumes, hazardous media, large batches, specific process conditions (uniformity, very fast or very slow shaft speeds, a combination of these), short deadlines, high output requirement, etc. д.

In all of the above methods the pelerator is trying to replace the mixer at mixing. Is it justified?? Is the peorator capable of performing a function that is not inherent in its primary application?? We will try to answer all these questions in this article.

mortar, hammer, drill, dust

As we know, modern rotary drilling machines are capable of working in at least two modes: drilling and boring with a hammer. It is also known that an adapter (additional chuck) for drill bits is inserted into a standard SDS chuck for drilling.

Recommended nozzles

We recommend the STARTUL 120×600 mm SDS mixer nozzles and GEPARD 120×600 mm M14 whisk.

120×600 mm SDS STARTUL mixer is a right-handed spiral and is suitable for drills and rotary tools with SDL-Plus plug. Recommended mixer speed is 600 rpm, and it is used for all kinds of heavy and viscous mixes (plasters, fillers, resins, concretes, etc.).

The 120x600mm M14 GEPARD Screwdriver has an M14 shank with a height and diameter of 105/120mm. According to the configuration is the right-hand spiral, the optimal speed when kneading 600 revolutions per minute.

In conclusion it is recommended when choosing a mixer to pay special attention to the type of shank, because an error will lead to the fact that the whisk simply will not become on the mixer or drill.

Homemade mixer

Electric mixer with his own hands to make pretty easy. For this purpose, you can use an ordinary household electric drill or peorator as a drive. Drill bits with a standard hex or HEX shank are suitable. Both are easy to fix in the cam chuck of the drill. The main thing is to make sure that the size of the hexagon (standard: 8, 10 and 12 mm) corresponds to the maximum size that can be inserted into the chuck of the drill.

Attention! Only low-speed drills, or devices with variable speed can be used for mixing mortars.

If you use a peorator as a drive (of course, in hammerless mode), it is necessary to buy bits with a shank designed for mounting in the SDS-plus chuck.

However, it should be borne in mind that the motors and gears, both in electric drills, and in peorators (even powerful) are designed only for longitudinal load. Therefore, self-made mixer based on them will be quite suitable for mixing non-heavy solutions and in small volumes. When stirring mortars the drive experiences significant radial and horizontal loads, which can lead to overheating and failure of the electric motor. Therefore, it is better not to make a mixer for concrete with their own hands from a drill or peoratora. Although their use is quite acceptable when stirring paints, light putties and other light solutions.

Read also: How to know the wattage of an electric screwdriver

Mixers for peoratora: how to choose and use?

On a construction site of any scale, there is a need to stir various liquids and mortars. You can do this as a special tool, and various machines of an auxiliary nature. In the second case, if the amount of mortar to be processed is small, it is useful to use a mixer for peorator.

Nozzles for construction mixer: shapes and sizes

The nozzle for an electric construction mixer is a rod, on one end of which is a whisk for mixing, and on the other end is a shank for attaching the nozzle to the drive. After you have decided on the mixture you want to mix, you can choose the shape of the whisk. And the standard of the tool shank should correspond to your power tool.

Types of shanks for the mixer nozzles

Now on sale is a large number of attachments to the mixer with shanks of various shapes:

| Denial of responsibility | Contacts |RSS