How to cut felt-based linoleum

What to cut linoleum at home, types of blades and more Linoleum. one of those materials that appeared on the construction market and took his niche in it, holds it, without giving up positions for decades. In addition to ease of maintenance, a choice of colors and textures, it is also notable for its affordable…

Read More

How to cut ceramic tiles at home

How to cut tiles with different tools When tiling any premises with tile, you have to lay not only whole tiles, but also their parts. In this case the question arises, how to cut tiles so that the edges were obtained even. It is even more important not to break the entire tile, the cost…

Read More

Reverse hammer with a vacuum suction cup with his hands

How to make a reverse hammer to remove the hub with your own hands Such automotive repair as auto body repair is a rather complicated operation. From you will need a number of special knowledge, as well as devices and tools. The reverse hammer is an important part of bodywork repairs. This tool is simple…

Read More

Husqvarna 142 stops when you press the gas

Repair of chain saw Husqvarna 142 with his hands carburetor Problems, the solution of which can be the adjustment of the carburetor, quite a lot. Adjustment of the carburetor of a Husqvarna chainsaw is necessary when malfunctions such as: High idle speed; Strong smokiness when the tool is running; Difficulty in cold or hot engine…

Read More

Tools for laying laminate with your own hands

Tools for laying laminate flooring: what you need for quality work In addition to the fact that you will need a set of tools for laminate, you need to buy construction materials. Film for waterproofing; Painting tape (to restrict the jigsaw); Ordinary scotch tape of any color for gluing the joints of the substrate, with…

Read More

How to make a receiver for the compressor with their own hands

A compressor from a gas cylinder with their own hands. Compressor with their own hands: installation options How to make a receiver from a propane cylinder A compressor is an indispensable thing in the household, at home. This is especially true for those who have their own workshop and like to make things or do…

Read More

What to cut tiles in home conditions

How to properly cut tiles? When planning a tile installation, you need to decide what to cut ceramic tiles with. Facing material comes in several variants, and for each type of tile there is a priority way to cut it. Read on to learn how to cut different tiles, and what tools are available for…

Read More

How to make an impact screwdriver with your own hands

A screwdriver from an old starter. A convenient and practical impact screwdriver from a car starter Experiencing difficulty unscrewing rusted bolts? I suggest you try to make a screwdriver, which allows you to unscrew almost anything! Sometimes it is needed to unscrew bolt that is badly rusted or for example screws with ripped edges. You…

Read More

How to cut tiles without a tile cutter

Do you know how to cut tiles for the floor at home with improvised tools?? With the development of technology, the popularity of ceramic floors of buildings has increased. Kitchens, bathrooms and corridors are difficult to imagine without tile, but for living rooms are increasingly using ceramic coverings with heating. Floor tiles are easy to…

Read More

How to cut a profil tube at a 45 degree angle

How to cut a 45 degree angle Often during the repair, you can be confronted with a situation where you need to cut off a piece from the part, at an angle of strictly 45 degrees. Usually, it is needed to connect two parts at right angles, 90 degrees, such as: door trim, baseboard, furniture…

Read More
| Denial of responsibility | Contacts |RSS