Fuel preparation for a trimmer for Patriot grass. How to replace a gearbox with a trimmer ethletric for Champion grass

Patriot trimmers are a vivid demonstration of American production of garden tools

A huge role in the performance and durability of a gasoline trimmer for grass is played by oil, which protects the details of the cylinder.piston group from rapid wear.

In order for the lawn mower to delight its owner with trouble.free work, a competent approach to maintenance is needed. Currently, it is customary to distinguish between two main types of engine by the number of working tactes:

The principle of operation of two- and four-stroke engines

  • two.stroke engines where oil is added directly to the fuel tank;
  • four.stroke engines with a separate oil tank. An exception in this category is the STIHL 4-MIX motor, which works on an oil bosinzin mixture, but at the same time has 4 operations of work.

Nevertheless, most of the trimmers presented in our market are equipped with power units operating on a mixture previously prepared in a fuel tank.

For trimming grass in the country or in the field you will need gas trimmers for grass. They work on gasoline, unlike electrical counterparts. Not many masters know how to dilute gasoline and oil for trimmers, gasoline and motorcycle.

The best. The best gas trimmers for grass

The step.by.step guide for the preparation of a fuel mixture of a trimmer for grass will be useful not only to beginners, but also to those who may make mistakes with chainsaws. Trammers for grass and bushes are powered by two.stroke engines that have a simplified design. Rarely there are models of trimmers with 4-stroke engines operating on pure gasoline. Two.stroke power units do not have a compartment for refueling motor oil oil oil, which reduces the weight of the tool and reduces its cost.

If the rotating parts of the engine are not lubricated, they will ultimately fail. To prevent this, a trimmer for the grass is seasoned not with clean gasoline, but a mixture of oil.

What kind of oil to dilute with a gasoline trimmer? To begin with, we note or find out what types of oils are produced in chemical composition: from the foregoing it follows that oil of any composition is suitable for the trimmer for grass. Mineral water, synthetics and semi.synthetics. Oils with various chemical composition are different in price, so when buying you should rely on the recommendations of the tool manufacturer.

The manual contains the recommended information about which types of oils are best used. If this is the TC-W3 standard, it does not matter what the substance should be. In this case, mineral water, semi.synthetics and synthetics can be diluted with gasoline.

How to dilute gasoline oil for a chainsaw

It is interesting! When choosing oil, the main thing is not to go to the fake, because in our time very often you can find different types of lubricants for two.stroke engines, which mainly consist of poor.quality oil products.

If the operating guide for this tool is lost and there are problems with the choice of suitable oil, it is recommended to choose the following two options:. When choosing and buying gasoline oil, you can find that some inscriptions are indicated on banks.

Fuel quality

These designations are the API classification, which will be useful for finding out who wants to fill the lubricant with appropriate parameters in the tool. Consider all types of oils according to the API classification for two.stroke engines:. API classification. American standard used in Europe.

This is a classification of smoke gases developed according to the Japanese standard JASO. If such designations are found on the selected oils and chainsaws of the trimmer for grass, then they should be considered decryption:. Oil for two.stroke engines have 2T marking.

Knowing the classification of oils by their types, it will not be difficult to choose the best version of the brush for your brand. On the market you can find various brands of oils for two.stroke engines, but it is better to pay special attention to the following companies:.

Product are not indicated, since their are changing. There are many other brands, and if you still want to find the perfect lubricant for your trimmer for grass for yourself, we recommend that you watch the test in the video below. From the video we can conclude that the purchase of expensive oils is not always beneficial, since they can be of low quality, as shown in an example from real life.

Oil output! For artisans, trimmers or black cutters, it is best to choose a synthetic or semi.synthetic oil of the TA or TB class.

Preparation for the first section of the brush

At the same time, follow the manufacturer’s recommendations, as some manufacturers of high.quality equipment can recommend only synthetic oils. How many people, so many thoughts, not only about choosing oil for a trimmer for grass, but also gasoline.

Also, in order not to make a mistake in choosing, it is recommended to use gasoline of the brand, which is recommended by the manufacturer specified in the instructions for the tool. However, here not everything is so simple, because at each gas station gasoline is called only the same, but they have a completely different composition.

Choosing a brand of gasoline for trimmers

You need to select a brand of gasoline for motorcycles taking into account the recommendations of the manufacturer. If you do not follow them, then the motor will soon break. Often for refueling a gas tank of a trimmer for grass, unhealthy fuel with an octane number of 92 or 95 is used.

Trammering a trimmer for grass with gasoline AI-80 can lead to breakdowns of the device due to its low technical characteristics. Keep in mind that after the purchase you can store fuel no more than 60 days, and it is better to reduce this period.

Polyethylene canists are not used for storage, t. to. In contact with the internal walls, static electricity will occur. The accidental appearance of a spark will lead to an explosion. Although, there are special canists of plastic with the marking “Flame”.

Advantages and disadvantages

The Patriot Pt 555 model has established itself on the market from the best side. Consumers characterize this model mainly only on the positive side, highlighting it among other similar products. The main advantages include the presence of a double cutting system (a fishing line for a trimmer and a knife), which provides mowing not only of thick grass, but also of dry, small shrub. The Patriot Pt 555 is also distinguished by mobility-it is allowed to be used everywhere due to the lack of a wire. In particular, the reliability of the work of motorcycles in the conditions of bad weather is noted; high performance and excellent traction effort; semi.automatic fishing line; the presence of an adjustable handle, which can easily be configured in a convenient working position; a shoulder belt that provides prolonged work without fatigue; low fatigue in the development of large sparks; minimum maintenance and efficiency of maintenance; affordable price. We also note a low level of vibration. In general, users of the Patriot PT 555 motorcycles are highly appreciated by all technical and operational capabilities.

Many do not comply with some important recommendations for pouring fuel in the gas tank of the trimmer for grass or lawn mowing, which ultimately leads to unpleasant consequences. Consider important recommendations on how to properly fill in the gas tank of motorcycles diluted fuel from gasoline and oil:

Prepare a funnel or watering can. Despite the large diameter of the hole of the gas tank, very often when trying to get into it, a certain part of the fuel is spilled, which enters the tool case

The fuel that came to the tool can cause ignition when heated, so it is very important to use a funnel or a watering can before twisting the cork, you should carefully clean the surface of the tank, since pollution can get inside, which will cause a quick clogging of the fuel tanker should be carried out in the calm The weather or in a secluded place to exclude the likelihood of dust and small grains of sand inside the tank do not leave the open hatch of the tank for a long time, since not only small grains of sand and dust can fall into it, but also insects do not inhale gasoline vapors during filling, Since they are dangerous for humans. When working with a trimmer, the master should use protective glasses, headphones and a respirator to pour fuel into the tank, you need to mark before the mark

If you pour a full tank, then with screwing the cork, some will result in a non.excessive use of fuel. In this case, it is better to shorten than to pour

Given these recommendations, you can significantly extend the service life of the gasoline tool in question.

It is interesting!Work on the preparation of the mixture and pouring fuel is also recommended in protective gloves.

How to prepare a high.quality fuel mixture

  • Gasoline is poured into the container to the corresponding mark.
  • Oils for gasoline, and not vice versa, flows oil for a two.stroke engine to the level
  • The mixture shakes it several times until uniform.
  • If a special container is not provided in the configuration, use the usual gasoline canister. Make a mixture in this ratio of gasoline/oil 32: 1.
  • To prepare a mixture directly in the fuel tank of a trimmer for grass is not recommended.

Buying any equipment in its kind is a lottery, but much also depends on the gardener. In caring hands and Chinese samples serve for a long time and do not let their owners at the wrong time. And if you forget to lubricate the motorcosa gearbox in time, do not clean filters, use cheap low.quality gasoline, then garden equipment from the most eminent brands will be a headache.

Lubrication of the gearbox Motokos is one of the most important elements of maintenance of a gasoline trimmer for grass, which the user should be carried out directly.

Time and procedure for the prevention of the gearbox

I recommend that the prevention of a new gasoline trimmer for grass immediately after purchase, with the addition of lubrication in the gearbox. For all the high cost of garden technology, some manufacturers save and lay lubrication only at a minimum, for the duration of the run.in.

How often to lubricate the gearbox motokos

Often, a preventive inspection of the transmission with the addition of liquid consistent lubrication is carried out once a year at the beginning or end of the season. If the gasoline trimmer for grass is used not in professional volumes, this is enough.

With large volumes of the mowing, lubricate the motorcosa gearbox every 20-50 hours of work. If the conditions of the operating mode of garden equipment are difficult, for example, a large field is pumped out at a time, and at the same time the lawn mower does not have time to cool down, or cheap lubricants are used, then the lubricant must be checked and added every 20 hours of work.

Indirect evidence that it is necessary to lubricate the gearbox to overheating or increased noise of the node.

I also recommend a complete replacement of lubrication, with disassembly and flushing of the node, when buying a used gasoline trimmer for grass.

Lubrication for gearbox of gasoline trimmer for grass

Assortment of lubricants for garden technology

According to the instructions for lubricating the conical gearbox, a special transmission liquid consistent grease should be used. As a rule, manufacturers of garden equipment produce and recommend the chemistry of their brand as the most adapted to their devices.

At the same time, to reduce the cost of the operation of garden equipment and increase the attractiveness of a brand of auto chemistry, grease for garden equipment usually produces multifunctional. It is intended not only for lubricating gearboxes of gasoline trimmers, but also for processing hoses, transmissions and gearboxes of any garden equipment and mechanical devices operating under high loads.

Such lubricant for the gearbox is sold in the tubes convenient for use and subsequent storage.

Even if a specialized lubricant for the gearbox was almost completely developed during operation, the additives still create an effective lubricating protective film on the surface of the gears.

It should be noted that many owners of the motorcycle in the vast CIS for lubrication of the gearbox use ordinary litol-24 or lubricant for Circus on a lithium basis. It is convenient to refuel the gearbox using a 5-cc medical syringe.

A undoubted plus of the use of lithola and lithium.based lubricant for refueling the transmission of motorcycles is a reduction in operation. But there are nuances because of which spears are breaking on the forums of the Internet gardeners. My thoughts on the topic, what can be lubricated with lubric.based lubricants, and what is not read in the article “Litol as lubrication of the motorcosa gearbox”.

How to lubricate the motorcosa gearbox, gasoline trimmer for grass

Side Bolt on 17 on the gearbox of a gasoline trimmer for grass

In order to avoid random launch, all preventive work on a motorcycle is necessarily carried out with a removed electric cap / plug from a candle. Do not turn the trimmer for the grass to avoid gas leakage.

We unscrew the side screw on the motorcosa gearbox. Depending on the company.manufacturer of a garden tool, instead of a screw for a hexagon, there may be a turnkey bolt, more often at 17. The thread is ordinary, unscrew counterclockwise. Do not lose the sealing puck.

If the lubricant is not visible on the internal end part of the screw, then it is necessary to add 3. 4 grams. Scroll through the gear with your hand, changing the direction of rotation so that the lubricant is distributed through the gears.

Then set the screw in place, tightly tightening it.

We proceed to running the lawn mower

After starting, do not rush to immediately run the trimmer for the grass. Let the engine idle for 5 minutes. While heating is going on, adjust the air supply to the air damper with a lever so that the rogue with a fishing line or with a knife does not rotate. As soon as the tool warmed up, we completely open the air supply to the corresponding lever to the “ON” position and squeeze the gas trigger for 1/2 and hold the seconds of seconds 30. Then we drop the gas, let the trimmer work on xx 30.40 seconds. In this mode we continue 10 minutes 15. Then we mock and let it rest for 15 20 minutes.

Having cooled the lawn mower, we continue to run the engine according to the previous scheme. Start a hot, a trimmer for grass should already be with an open air damper. Try not to hold the gas for a long time, since the movable details of the tool only rubbing each other. And do not let the engine work at idle for a long time as it can overheat.

Такое КОШЕНИЕ ТРАВЫ не взрывает “МОЗГ”. косилка для любого типа травы “Мульчер М-60” к мотоблокам.

The next stage is the run.in a gas reducer gearbox for grass. To do this, select a plot with soft young grass. Kosim 5 10 minutes with 1/2 2/3 from full gas. After we take a break for 20 25 minutes. Repeat the cycle 3 4 times.

In general, therapist for the lawn mowing according to the described algorithm is carried out until the fuel mixture in the tank is fully generated. After which the tool is ready for long.term work. In the process, follow the temperature regime of the gearbox and the motor. They should not overheat.

How to repair a starter on a trimmer

Repair of the starter of a gasoline trimmer for grass may be required at the most inopportune moment. In this case, you can solve the problem in two ways: replace the broken part or change the entire node. The latter option will cost more. To repair the device with your own hands in most cases, you need only a screwdriver with an appropriate tip from the tools. Repair work will not take much time and do not require special knowledge. It is enough to know the device, the principle of operation, the nuances of the assembly-disassembly of the starter on the trimmer in order to achieve the desired positive result.

Parsing the starting node

They disassemble the launch mechanism in order to install new parts instead of broken in the following sequence:

  • spin a screw with a screwdriver, fixing the pulley with a starter lid;
  • take out a spring and antennae;
  • Remove carefully with the pulley (you need to unscrew the head or work, having dressed the glasses and gloves before);
  • determine why the launch mechanism has broken;
  • If the spring collapses almost completely, then it is replaced;
  • When the spring exits from the hook, it is installed in the original place, bending the antennae before this (the photographs show the laying process);
  • After the spring plate is installed inside the groove, it is carefully twisted.

To change the spring, you should work carefully and accurately: it can, under the influence of the effort caused by the installation of it in place, accidentally burst. Even if you carefully remove the video, then the spring strip flies very quickly from the coil and can injure your hand with its sharp edges.

Immediately putting a springy plate in the same place does not always work. It often slips, so attempts are required to repeat until the desired result is achieved.

Lubricate a trimmer for grass video-tips from the online store Kosi braid for grass

How to lubricate and how to do it. we examined in detail. meticulous work can be considered by video. Also, the site’s customers are available photos in which each user will find useful information for himself. In general, the lubrication process does not take much time and effort, the tool itself offers at a low cost our store. That’s why, by setting a request on the network “grease a trimmer for herbs video” you will definitely find yourself on the website of “Kosikos”. Experts removed the video for the user of the user of the process of lubrication of individual elements and gearbox trimmer for grass, which is mandatory in the context of working with any type of oblique tool. Motokos knives in Ukraine, as one of the types of cutting gear, will always offer a profile store online at competitive prices.

From time to time, in the midst of saturated work on mowing the grass, your trimmer for grass begins to make nasty, grinding sounds. This complains the gearbox on the lack of lubrication. a more actively loaded node of the device. And soon, these “warnings” may follow the junction of the drive.

When working, the mechanical part of the trimmer for the grass is loaded with contact efforts on the teeth, resistance reactions from adhering grass (from time to time. with mud), dynamic, shock loads due to the time of the time that changes the rotating moment. Lubricant for a trimmer gearbox for grass

should take these features take into account by all parameters, because the selection of the brand is obliged to strictly personal.

Subsequent reasons are taken into account:

  • Manufacturer’s brand. Any trademark is not unreasonably focused on lubricating its own production (there is an option to talk about cheap Chinese products later). This applies to manufacturers such as Husqvarna, Stihl, Huter, Makita, etc. The exception is trimmers for production grass: for example, the caliber in the annotation of the user generally does not show the brand of lubrication.
  • Break of lubrication. As everyone knows what it remains to make our client lubricants are divided into three groups. high.speed (colloidal accounting systems containing different additives), plastic compounds of universal implementation and hard lubricants softening during operation.
  • Not poor adhesion to the surface of the parts of the gearbox, and therefore in which the lubricant is not squeezed into the gaps or outside the node.
  • The intensity of eating lubrication by the gearbox. Here you have to focus on their weight characteristics The experience and advice of professionals, since some auto industry of trimmers, hoping for their own service centers, generally do not give clear tips regarding the period of reducer work between 2 lubricants.

Lubricate the Huter GGT-2500S lawn mowers. And everyone else gas!

The consumption of the lubricant also depends on the temperature, at which he retains his lubricant. When heating the gearbox to 40 ° C, it is believed that its working conditions are satisfactory, and there are enough lubricants.

Chips on the choice

Now let’s try to understand how to choose high.quality oil for a trimmer for grass working on gasoline

The main feature that is required to pay attention will be an alkaline number. The moment excludes the oxidation of the parts that have friction, and slows down their deformation as much as possible

The more this composition is used, the faster it loses alkalinity and becomes more oxidized. The optimal indicator of acidity (pH) is a value of at least 8-9 units.

The second important factor, which also has a serious impact on the operation of a gasoline trimmer for grass, is the viscosity of the oil. This characteristic determines the possibility of using the device at various temperatures. Summer grades of oils begin to thicken already with a minimum decrease in temperature.

But given that such trimmers for grass are usually used in autumn and spring, it will be best used to use just oil with summer marking.

The third moment, the importance of which should not be understated. the temperature of the flash. This indicator should not be less than 225 degrees

Otherwise, the composition will burn very quickly and the load will begin to increase on the piston group, which will determine its accelerated wear. In addition, oil for a 4-stroke engine is not suitable for a 2-stroke. Namely, the last type of motors is used in the vast majority of benzocosyles.

If we talk about manufacturers, you can make a small rating that will allow you to navigate in the compositions offered by various manufacturers. For example, STIHL offers high.quality synthetic and mineral oils that have already proven themselves as an excellent solution at any time of the year.

Shell Helix Ultra oil is considered very good. Experts note its high characteristics and excellent indicators of alkalinity and viscosity. In addition, the products of such brands as Oleo-Mac, Motul, Hammerflex, Echo are considered worthy

If we talk about the products of domestic brands, then you should pay attention to Lukoil oil. Its price is several times lower than foreign analogues, but it has high quality and good technical characteristics

In general, a synthetic or semi.synthetic oil that has a marke of TV or that is an ideal solution.

CMI, MTD, Patriot, OLEO-MAC in the Ob online store

In order to lubricate the rubbing parts of motorized and power tools, oil for garden equipment is used. On sale there are the following groups of special and universal lubricants, which are lubricated:

They contain additives that provide increased lubricants, resistance to high temperature, increasing the resource of bearings and parts of the motor installation and gearbox.

Payment and delivery methods

  • Buy goods online with delivery
  • You can pay for the order in cash or bank transfer.
  • You agree with the date and delivery time with the operator by phone when confirming the order.
  • The terms of the free provision of services depend on the city, the amount and weight of the product.
  • Unloading of goods, lift and transfer are additional services and can be paid separately, check with the store operator.

Detailed information about the intervals and zones in cities, the conditions of unloading and lifting the order are on the service page, where you can independently calculate the cost of your delivery in advance, indicating the mailing address and parameters for unloading.

  • Order and take it yourself where it is convenient for you
  • When filling out the order form, indicate the date and time convenient for you to visit the hypermarket.
  • You can pay for the purchase in cash or bank transfer at the store’s cash desks.

The purchased goods can independently be taken in any of the stores of Ob, St. Petersburg, Ryazan, Volgograd, Nizhny Novgorod, Saratov, Kazan, Yekaterinburg, Omsk, Krasnodar, Surgut, Bryansk, Tula and Volzhsky.

We will deliver the goods you have chosen on the site in a convenient place for you: to the house, to the country, to the office.

Select the goods, place an order on the site by indicating delivery, and get it at a convenient time for you at the address you specified. You can pay for the order and delivery of cash upon receipt.

НЕ ВЗДУМАЙ ПОКУПАТЬ,пока не посмотришь видео! Обзор бензотриммеров PATRIOT PT 443 и CHAMPION T528S-2

Delivery is carried out within 1-2 days; 3 time intervals are available.

To save your time, we will collect all the goods you have chosen and prepare an order for the receipt of the ubs in the hypermarket.

Select the product, place an order on the site and take it yourself at a convenient time for you. You can pay for the order on the spot when receiving.

Previously, you need to choose a ubes hypermarket in which you plan to get an order. Hypermaket selected at the moment is indicated in the upper left corner of the site.

user’s manual

Each Makita brush, including RBC 411U, comes with the leadership; The manual contains complete information about the tool:

  • Gas trimmer device for grass.
  • Step.by.step collection of motorcycles (added schemes and descriptions).
  • Characteristics table of the selected model.
  • Safety requirements at work and when servicing.
  • Preparing for the first run.
  • The first time the guide
  • Engine breakdown
  • Motos maintenance.
  • Problems with a gasoline trimmer.

The first start

The following simple steps will help you correctly prepare a trimmer for grass for use:

  • Collection tool.
  • Adjust the shoulder belt.
  • Dress and fix a knife or court.
  • Attach the protective cover to the trimmer.
  • Connect the high.voltage wire to the candle.
  • Check the contact of the spark plug.
  • Make sure the fastening is reliable.
  • Fill the fuel tank with fuel.
  • Add motor oil.
  • Starting power plant.
  • Make sure the knife is in standby mode and in working mode.
  • Check the mechanisms and controls.

When a trimmer for grass is fully tested, the engine works. Launch.

Works in

Opening hours 5 hours. During this time, the bureau is consumed a little, half the engine power. All details have begun. After the end of the input period, it is necessary to completely replace the engine oil (brand SAE10W-30 or semi-synthetic 2T).

Service

Proper care of the gas trimmer will extend its service life and eliminate frequent breakdowns. The manufacturer of Makita equipment recommends the following maintenance work on the RBC 411U bush:

  • Replacement of motor oil: immediately after the refusal period and first after 20 hours of work, then every 50 hours of work.
  • Replace the spark plug every 100 hours.
  • Maintenance and cleaning of the air filter every 3 hours.
  • Trimmer care, dust removal, vegetation, oil spots are performed after each operation.
  • Lubrication of parts and mechanisms of gasoline tools.
  • Sharpening (replacement) of cutting elements every three hours.
  • Preparation for long.term storage.

Conservation of a trimmer for grass includes the following:

  • disconnect the spark plugs wire;
  • drain fuel, butter;
  • Clean the air filter;
  • clean, wash and lubricate the brush;
  • Remove the knife, grease the shaft, wrap the knife in oiled paper;
  • clean in a dry, ventilated room.

Basic errors and solutions

Even with proper maintenance, trimmers for grass can fail.

The engine does not start, delayed, heats up:

  • There is no gasoline or has poor quality;
  • oil level below normal;
  • lost carbohydrate settings;
  • the carburetor is clogged;
  • Fuel highways are clogged with mud;
  • no compression in the cylinder;
  • hacking / in wires;
  • no contact on the candle;
  • a faulty spark plug;
  • overflow of fuel;
  • The beginning of the blow does not stretch;
  • The magnet requires attention.

“I bought Makita two months ago, I decided not to choose it with a belt and a corset, mow it three times, get used to the tool, a little unusual. It processes well at low speed, cuts out both branches and bushes. “

“I’m looking for a suitable trimmer for grass, of course, gasoline. Power came to Makita RBC411U. I would like to know more about this trimmer. This is suitable for the story in hundreds of 10? Who will say what? “

Spring can interfere

My first attempt to adjust the brace of the carburetor failed, because the spring of the adjusting screw of the fuel mixture prevented this. The factory spring was too thick in a compressed state and did not allow to reduce the supply of fuel to the required level. I had to collect another spring and continue to adjust after its replacement.

In the photo above. Factory spring, below the adjusting screw with the selected spring. I write about this because I’m not sure that this is an isolated case, and someone else may face the same situation.

Tools

Trimmer for grass gasoline Patriot RT 3355 is designed to trim and mow low grass on lawns, streets, around trees, along the roadsides, on lawns and garden areas. The unit is successfully used on even and relief, uneven areas. The manufacturer improved the model taking into account convenient transportation and easy use: the bar is made by a detachable, quickly assembled and disassembled. The comfort of operation adds a wide shoulder belt with an adjustable length. Fast launch is simplified by the primer.

For its motoblocks, Patriot has developed a number of attachments that saves the time and effort of the owner. Photos of some devices can be seen below, the most popular models are also presented below:

Ceremonial cerebral pages

  • Hellets of different species are used to lay the furrows for planting;
  • Potato.captacco is used to facilitate potato collection. The device lifts the tubers and separates them from the ground;
  • Mowers are rotary or segmented. Used for mowing grass and grain crops. After mowing, put the grass in the ranks, which are subsequently easily assembled;
  • Cart or trailer are designed to transport goods;
  • The adapter is used to facilitate the process of working on a walk.behind tractor;
  • The snowmobile prefix is ​​not installed on all motoblocks, but thanks to it, the passability of the unit increases and the work is facilitated;
  • A snowmaker or a snow discriminator allows you to effectively clean the area from snow;
  • The coupling is used to connect additional equipment;
  • Water pump is used to supply water to the site;
  • Light-off shovel is designed to clean snow, land, as well as bulk materials;
  • The plow eases the virgin soil.

The device of the motor block gearbox

Reducer. one of the important components of the walk.behind tractor. It is completely on all models, without it the equipment will not work. Reducer function. uninterrupted transmission of the rotating moment from the motor to the wheels through the cuneiform transmission. Not counting that it provides a change in the speed and direction of the movement of the agricultural unit. Simply put, ensures the movement and management of technology.

The gearbox consists of a system of shafts and stars connected by a chain. The shafts take rotation and transmit using a chain. The input shaft is equipped with a lever and a fork that switch the mechanism. From the dirt and dust, the details protect the plastic case with a bolt mount.

Motobobes are inconspicuous assistants on the farm

All parts are made of metal and need lubrication. With a shortage of lubrication, the load on contacting details grows sharply, which can lead to their renewal destruction. Timely oil substitution in the gearbox will ensure their serviceability and uninterrupted operation of the mechanism as a whole.

| Denial of responsibility | Contacts |RSS