Gloves to work with an angle grinder

Anti-vibration gloves. purpose, types, how to choose

One of the harmful factors in the workplace when working with heavy tools is vibration. The simplest protection against vibrations can be called anti-vibration gloves. In this article, a master plumber will tell you how to choose “anti-vibration gloves”.

Industrial and domestic use

Modern anti-vibration gloves are an excellent means of personal protection. Of course, it is not possible to completely extinguish vibrations. But it is possible to reduce them to a safe level. Special accessories are used when working with the following tools:

Of course, the characteristics of anti-vibration gloves do not end there. Advanced models can protect the hands from cold, moisture, contact with petroleum products and industrial oils. There are glove versions for grass trimmer (lawnmower), car and bicycle riding, as well as for:

  • Housing and utilities;
  • Metalworking;
  • Metal smelting;
  • Mechanical Engineering;
  • agricultural works;
  • Logging and woodworking industries;
  • Construction, overhaul and repair.

According to GOST, antivibration PPE should have a breaking strength of at least 250 Newton. The normal operating temperature range is from.15 to 45 degrees. Increased protection from vibration is achieved by equipping with inserts that act as auxiliary damping elements.

Glove uppers in suede, nitrile latex, jersey and polyester. Available in natural and synthetic leather, lycra and polyamide. The simplest armbands for gardening and gardening are made of leather, cotton tarpaulin with a cushioning.

Vibration-absorbing chloroprene foam, materials with polymeric structure and composition: rubber, rubber and layered materials on their basis are used in production of the spacers working surface. These materials can cause dissipation of external acoustic energy.

Should you wear gloves when using an angle grinder?

Among the indicators that are subject to rationing are:

  • Tear resistance;
  • Puncture resistance;
  • Number of cycles to break (average);
  • Percentage reduction in the intensity of low-frequency, medium-frequency and high-frequency vibrations;
  • Vibration-absorbing backing and coating material.

Gloves for simple jobs protect the hands from vibration and mechanical factors. These products are created from durable leather. They also have cuffs to protect the wrists.

The best models are professional. They are excellent protection against vibration. They also do not wear out over time. These mittens sport cuffs with whalebone inserts. They are attached by means of velcro fasteners.

Each manufacturer strives to produce a variety of gloves. There are products where vibration-suppressing functions are primary and secondary. Some have dirt- and moisture-repellent nitrile impregnation and gel inserts. Even budget products can have these characteristics.

Before you buy a product, you should read its description, as well as reviews. The choice also depends on the frequency of vibration, which is indicated in the characteristics of the tools.

There are dozens of models of anti-vibration gloves, and it is impossible to tell about all of them. But you can choose a suitable model for yourself according to a number of criteria.

The following tips will help you make the right choice:

  • Thickness is key. No matter what they say about innovative materials and breakthrough solutions, only a thick layer of any material can reliably protect your hands. Very light gloves will satisfy drivers, but they can be used for mixing concrete or drilling metal for an entire shift. But heavy, dense products offer better protection, but at the cost of poor tactile characteristics.
  • For delicate manipulation with light tools, you want models where the thumb and middle finger are open. Some cyclists prefer specimens with fully open toes.
  • Breathable, sweat-wicking models are available for work in warm rooms. The rubber contact surface provides a better grip, prevents slipping and enhances safety.
  • If there is a need to work on wet or oily surfaces, gasoline-resistant or models with a roughened, anti-slip surface are required.
  • Moisture-resistant gloves will help avoid skin diseases caused by prolonged work in the water. Chemical industries will need models that protect against alkalis and acids.

Tips provided to help you choose the right products for your work environment. First it is important to determine the main characteristics, material, and then you can buy the best option. And mistakes in choosing can significantly complicate the process of work.

You can note the most popular models:

  • Gward Argo anti-vibration gloves are widely in demand. Made of selected natural cowhide leather. Polyurethane foam is used as a filler. Vibration resistance category 2A/2B. For the manufacture of cuffs goes rubber of high elasticity. The manufacturer promises increased comfort when working with fingers and at the same time an excellent level of sensitivity. The shape of the gaskets is designed in such a way that the impact intensity is additionally reduced. Product designed for stable and successful operation with a variety of gasoline, pneumatic and electric power tools. Gward Argo have passed the whole test cycle according to Russian certification requirements. Tested in a laboratory whose status has been confirmed by the Russian Federal Accreditation Agency.
  • Popular also is the X-Marina model. Designers included a leather palm Reinforced vibration inserts are placed in finger and palm areas. The segmented arrangement of the vibration protection components is well thought out and guarantees excellent grip without much effort. The LP range uses kevlar, as well as a standard velcro fastener.
  • Jeta Safety JAV02. product in strong synthetic leather. The official description makes special mention of increased resistance to mechanical wear. Outer surface is made of combination of Lycra and polyamide. Suitable for general mechanical work and for construction workers. Users can choose between black and red pieces.
  • Vibroton products, as the official description indicates, are optimized for protection against low and medium frequency vibrations. Specifically, not more than 125 Hz. However, it is quite sufficient for the operation of demolition hammers, concrete mixers, drilling equipment of domestic and industrial class. It is interesting, that a reinforced kind of canvas is used for the production of Vibroton gloves. Inside, a 6 mm thick Stepor pad is placed to reinforce vibration damping, with a soft flannel in direct contact with the skin.
  • Vibrostat stands out with an even more advanced and diverse range. It puts the emphasis on mastering innovative technologies in vibration protection. Thus, “Vibrostat-01” is sewn with the strongest possible kevlar thread. The weight of a pair of gloves in a package can be 0.5-0.545 kg. Can be used for a wide variety of tools. The well-designed ventilation openings of the gloves are also worth mentioning.
  • The Tegera 9180 is worth mentioning in the end. Patented Vibrothan material is used to enhance protection in this model. Designers have paid attention to the anatomical cut of the glove fingers. Important: The construction does not contain even trace amounts of chromium. After prolonged use, the degree of protection and sensitivity must not be reduced.

In the story. Choosing KVT, Elementa, Ansell, GROSS assembly gloves. HILTI, Mechanix Wear, Haupa

Safe work with angle grinder

Getting to work

Protective sleeve and goggles. Essential safety precautions. The two most important rules that must be strictly adhered to. Do not operate the angle grinder without the safety guard removed and without goggles. Sparks, abrasive particles, shards of metal and scale. inevitable companions when working with an angle grinder. If they get caught in the eye, they can cause injury.

Goggles or a mask replacing them should be of the closed type. Sparks and fragments follow a complex path and may fly behind the eyeglasses or mask if they are open from the side. It is not bad, if the mask will have a safety mesh, because the impact of debris grinding wheel can be so strong that the unreinforced mask can not withstand the blow.

The guard is the first barrier that stands between the operator and the high-speed rotating wheel. Destruction of the latter. Is fairly common. Many people, who more or less regularly use angle grinder, at least once, but faced with it. Most often the destruction of the disk occurs when it is clamped (jammed) in the slot.

The protective guard must be installed so that no sparks or shards can fly toward the operator. The following images clearly show how the guard protects the operator in the event that a wheel breaks while spinning. It is clearly visible that the sector of splinter dispersion is set by the opening in the cover.

At the end of the article there is a video of this experiment.

The hood must be mounted in such a way that it cannot rotate by itself. No matter how inconvenient it may be in some cases to work with the hood, its removal from the tool is inadmissible. Otherwise the operator is not secured against the most unpleasant consequences.

Other personal protective equipment. In addition to goggles to the mandatory means of personal protection when working with angle grinder should also include gloves or gloves. Hands are in close proximity to the rotating grinding wheel and must be protected against sparks, abrasive particles and metal splinters. It is best to use thick leather gloves to protect your hands, cotton ones cannot provide reliable protection against sparks.

A dust mask or respirator is used when processing stone materials without using dust extraction devices.

Clothing must be loose and well tucked in. Wobbly parts may be tightened by the rotating wheel.

Removable tool

It is not permissible to fit a wheel larger than the size for which the angle grinder is intended. Small angle grinders have higher rotational speeds than large angle grinders. Large-diameter wheels (both new and used, reduced in diameter) may not be able to withstand the high speeds and could break. This is all the more dangerous because you have to remove the guard to install a large wheel. In addition, too high loads from the rotation of a large wheel causes increased bearing wear and reduces the lifetime of the tool.

See also  Mini circular saw from the angle grinder with his own hands

It is not permissible to fit larger grinding discs on an angle grinder than the discs for which it is designed.

Damaged grinding wheels must not be used: cracked, chipped, pitted, out of roundness or flatness. This can lead to blowback and complete destruction of the circular saw blade. creating a dangerous situation.

One of the most important safety requirements for angle grinders. the angle grinder must not be used with wood saw blades. Because of its extreme danger it must be absolutely avoided. The history of using angle grinders is full of tragic accidents that happen as a result of installing saw blades on them.

This is due to the fact that the wood. This is a heterogeneous material with knots that can cause kickback. There may be nails, too. In addition, the angle grinder has a very high RPM, and the saw blade will quickly dull.

After installing the tool, check that the angle grinder idles for at least 1 minute at maximum speed. The wheel should rotate freely without touching the guard, and the vibration should not be greater than normal.

Clamping of workpieces

The workpiece must not be bent in the kerf especially if it narrows the kerf. In this case it is almost inevitable that the disc will be caught in the cut and kicked back. A properly stacked workpiece should have stops in the kerf area and at the edges.


the angle grinder must be held firmly with both hands. This is a fundamental requirement that must be strictly adhered to. If the tool is held securely enough, even a reverse impact will not cause the tool to shift too much or to be pulled out of your hands.

The body must be in a stable, unbalanced position.

The power cord must be away from the rotating wheel. Otherwise it could be cut or caught by the blade. Both create a hazardous situation. short circuit and abrupt stopping of the disc with displacement of the tool.

The power supply cable must be located away from the operating angle grinder

Do not let go of the angle grinder until the grinding wheel has come to a complete halt. to prevent the rotating wheel from catching anything or the supporting surface.

When moving from one workstation to the next, the tool must be switched off. The rotating disc can catch clothing or other objects.

If the power supply is interrupted during work, the angle grinder must be turned off so that it does not start up uncontrollably when the power supply is restored.

Cutting and grinding wheels become extremely hot during operation and must not be touched until they have cooled.

Keep all bystanders a safe distance away from the work area. so that flying sparks and abrasive particles. In the event of an accident and splinters from the grinding wheel. without damaging them.

Cutting with an angle grinder. Grinding wheel must be brought into contact with material at full spindle speed, otherwise it could jam.

Sawmill manufacturers strongly recommend cutting in such a way that the direction of the tool’s travel and the wheel’s rotation are identical. This prevents the wheel from leaving the slot in an uncontrolled manner.

This is probably the safety requirement which is most frequently violated by users. The thing is that this way the spark jet flying out from under the disk hides the marking, making it impossible to drive the disk with the mowing line. This is why many users deliberately violate safety requirements by cutting in the opposite direction to the wheel’s rotation. That way the sparks do not obscure the marking and cutting is more accurate. Nevertheless, the correct operation of an angle grinder requires the tool to be guided in such a way that the direction of movement coincides with the direction of rotation of the wheel.

When cutting, it is important to ensure the correct position of the angle grinder. The cutting line should pass by the operator, not rest against him. In this case, if the wheel jams, the reactive motion of the tool will also be off to the side.

The guard must be between the wheel and the operator. Only then does it provide reliable protection.

Avoid applying excessive pressure to the angle grinder when cutting. Let the machine do the cutting “by itself. Overloading causes the wheel to break and creates a risk of the wheel jamming and backfeeding. The operator’s job is to correct the movement of the tool by applying light pressure where it is needed.

When cutting profiles, always start at the smallest cross-sectional area.

Do not operate the tool while the wheel is in the kerf.

Grinding with angle grinder. Very thin cutting-off wheels should not be used for grinding. You can not grind on the side of the cutting wheel, which is not designed to work. Wheels are not designed for high side forces and can break. Grinding must be carried out with the edge of the wheel, inclined at an angle of 15 to 40 degrees to the grinding plane. In doing so, the tool is moved forward and backward with moderate pressure. When starting a new disc, do not use the tool in direction (B) or it will cut into the workpiece. Once the edge of the disc is rounded, it can be used in both (A) and (B) directions.

Cutting with an angle grinder in concrete, tile, stone. Concrete, tile or stone should be cut with special wheels designed for these materials. Cutting these materials generates a lot of dust that is hazardous to your health. The pencil cutters have a more closed protective cover with a nozzle for a vacuum cleaner to remove dust.

Makeshift cover for angle grinder with a nozzle for connecting a vacuum cleaner

If dust extraction cannot be organized, use a respirator with P2 filter. You can also suppress dust with a jet of water directed at the cut, use room ventilation.

Be especially careful when making wall cuts in which various pipelines, electrical cables, and fixtures could be present. If the disc hits them, a backfire can occur. Damage to electric cables can cause electrical shorts, cutting a gas line accidentally can cause an explosion. Before working in unfamiliar areas, examine them for utilities.

Kickback. The main hazard when working with an angle grinder is backfire. Abrupt and sudden tool kickback resulting from the rotating wheel jamming in the workpiece. Grinding wheel breakage frequently occurs.

According to the laws of physics, the reactive motion of the tool is in the opposite direction to the rotation of the disc. Reverse shock is usually the result of operator error. Certain precautions can help prevent it or avoid serious consequences if it does occur:

  • Hold the tool firmly with both hands. Standard grips must be used.
  • The body must be in a stable position. This will help counteract the force of the kickback.
  • Stand clear of the place where the tool will move during the reverse impact. If the cutting wheel is held back, the power tool can bounce right back at the operator in the event of a reverse impact.
  • Special care must be taken when cutting corners and sharp edges and be prepared for possible tool kickback. Kickback especially occurs at the end of a cut when the last lintel that joins the individual parts of the workpiece has been cut. In this case, to avoid backfire, it is recommended, without bringing the cut to the end, to remove the wheel and carefully cut the crosspiece on the other side.
  • In the event of jamming, disengage the tool and remove it from the kerf.

Special safety requirements. The guidelines for use of the angle grinder include a number of requirements that, although not directly related to cutting and grinding operations themselves, are very important.

No flammable liquids, gases, combustibles (fuel, solvents for paints and varnishes, rags, etc.) may be present near the work area.п.

Materials and items that can be damaged by sparks and splashes must be removed, particularly plastic and regular glass, which leave indelible marks after being struck by sparks. If they cannot be removed, they must be covered with a suitable material (e.g. a wet rag).

When using the angle grinder in damp conditions or outdoors in high humidity, it must be connected to an RCD to prevent electric shock.

Unauthorized persons should not be allowed to use the angle grinder unless they are certain they are qualified to do so safely. Children must also be kept away from the angle grinder.

“Nima NRT DNN-42

High strength products based on patented Dyneema steel fiber knitting technology. Product is oriented to work with heavy machine tools, car engine parts, construction materials.

Increased durability, resistance to cuts by sharp steel objects.

The double PVC coating ensures a firm grip on any smooth surface.

Ability to work with chemical reagents, oil compositions at repair of motor vehicles.

Dark color hides obvious dirt traces, so the product does not lose its marketable appearance for a long time.

Wide cuff fits loosely around the wrist.

Thick layer of base and coating reduces hand sensitivity.

gloves, work, angle, grinder

Available in 2 sizes. 9, 10. The fabric is not able to stretch much, which requires trying on before buying.

Hands account for about 30% of all injuries at production facilities. The need for special work gloves is often ignored. However, it is recommended to take into consideration that the gloves are not only about protection, but also about comfort and easy finger manipulation due to the special anti-slip coating.

What can be used for

A whole list of jobs of industrial and household nature requires protection of skin on hands against various kinds of adverse factors. Gloves, depending on the function, are made of different materials. This PPE is able to eliminate the effects of the following factors on the skin of the hands:

  • Mechanical: characterized by resistance to wear, puncture resistance. Can be made of leather, split leather, sailcloth or latex, polyurethane, nylon, or a combination of materials;
  • Low temperatures: distinguished by the presence of thermal insulation component, sewn from leather, leatherette, wool, split leather and others;
  • High temperatures: made of heat-resistant materials or have flame-retardant impregnation (splilok, kevlar, leather, sailcloth);
  • electrical current: the material must not act as a conductor. rubber, latex;
  • Chemicals: they must protect against aggressive agents (acid, alkali, varnish, paint, etc.).п.). Made of nitrile rubber, neoprene, latex;
  • Oil products: the material shall have oil and gasoline resistant impregnation.
See also  How to remove the anchor on the angle grinder. Few tips

Where to buy protective gloves at a profit

Leroy Merlin’s online catalog offers a wide range of gloves for construction or gardening work, and also models which can be used at a production site. Our catalog products meet GOST requirements and have the proper protective characteristics. The best in Russia and the ability to choose online. a great way to save time and money with Leroy Merlin. Leroy Merlin online catalog items are also available at Leroy Merlin Hypermarkets.

Leroy Merlin offers wide choice of goods at low for residents of Moscow, as well as cities of Moscow region: Balashikha, Podolsk, Khimki, Korolev, Mytishchi, Lyubertsy, Krasnogorsk, Electrostal, Kolomna, Odintsovo, Domodedovo, Serpukhov, Shchelkovo, Orekhovo-Zuevo, Ramenskoye, Dolgoprudny, Zhukovsky, Pushkino, Reutov, Sergiev Posad, Voskresensk, Lobnya, Klin, Ivanteevka, Dubna, Yegoryevsk, Chekhov, Dmitrov, Vidnoje, Stupino, Pavlovsky Posad, Naro-Fominsk, Fryazino, Lytkarino, Dzerzhinsky and Solnechnogorsk. You can order the necessary goods online with delivery in all these cities or visit one of our retail stores and MO.

Work Gloves. The challenges of choosing the right solution

As it so happened that until recently I was tightening the nuts with good tools, torque wrenches and lubricating with good greases without paying attention to hand protection.

I had once bought simple cotton gloves “with pimples” of varying degrees of lousiness, and with them, and often without them, I was turning these very nuts, and getting these “gloves” dirty, or my hands in kosher grease.

Actually, it was not that bad, but the cotton balls have a disgusting property to absorb all lubricants in addition to dirt, naturally turning into disgusting looking filthy lumps, which is disgusting and useless to put on hands. My hands, on the other hand, because I, despite all my efforts, am not getting younger, are starting to deteriorate more and more from the aggressive environment, and from the graceful hands of a pianist-surgeon turned into suspicious scruples.

After a quick glance around the market I got a bit bored, because the variety of brands, types and is great, and I’d like to do without pointless and ruthless experiments on my purse and hands.

Cotton-knitted gloves with rare dot coating or without it relatively inexpensive cost easy to put on and take off easy enough microplastic to take / hold on them even a small fastener

Cotton knitted gloves with latex coating (double coating) available in the variant of partial coating. only the working part and full, up to the sleeve. good protection for the hands against injuries (thick textile and liner) presumably no penetration of moisture and aggressive liquids to the hand, the textile does not get wet, then you can always wipe off the soiled cloudy part

-substantially higher price, and what costs imputed. it does not look “lined” very much, how much will wear?-If you again save and take doused partly. how often will be smeared on the top. the hand in them is much less sensitive and dexterous

Cotton. knitted gloves with nitrile coating (double coating) Like nitrile is considered to be more resistant to all kinds of chemical reactions Same advantages and disadvantages as above in latex-coated.

Medium price segment

Top manufacturers try to produce goods affordable for most people. The popularity of models in this price segment is due to good reliability.

Products protect the hands from punctures, blows, mechanical effects. The material contains anti-cutting fiber, which prevents abrasion, tearing load. Seams are finished with quality reinforced yarn.

Polymer coating is designed to protect against petroleum products. TPR linings prevent the product from affecting the back of the hand. Neoprene cuff secures the glove securely in place.

Modern sleeves have an insert of special Airgel material. Made of genuine leather with water-repellent impregnation. The outer part has a reinforced leather insert and ventilation holes. Seams are finished with durable Kevlar thread.

Sturdy cuff is secured with an elastic band to prevent vibration from spreading up the arm. product reduces fatigue. And thanks to the multi-layer structure, it retains heat at low temperatures.

Gloves with anti-vibration properties have a high degree of protection. Products provide comfort due to ergonomic shape, short wrist strap design.

Wearing Gloves Makes Power Tools EXTREMELY Dangerous

Products have reinforced seams. No loss of protection even with extended use. Designed for use with heavy machinery and equipment, power tools.

Product has nitrile coating, Velkro cuff. The gloves provide protection from vibration in the 250-1000 Hz range. They do not chafe, puncture or cut. They also provide protection from petroleum products.

Vibration protection lining lined with knit fabrics ensures comfortable use. The cuff fits snugly on the arm.

Modern gloves have a vibration-absorbing coating. They provide excellent protection against mechanical factors. Lined with a layer of hypoallergenic insulation that provides comfort. Outer is made of polyester with a breathable membrane.

Gloves are equipped with silicone inserts for a secure grip. They can be used for dry, dirty and clean jobs. Products can be used both indoors and outdoors.

Personal protective equipment for work with power tools

When buying a hand-held power tool, how many of you, dear readers, will study in detail all the sections of the manual that comes with it?? It seems that no. Usually the reading is limited to the technical specifications and how to put it into operation. This kind of negligence can have totally irreparable consequences. And that’s what we would like to focus on, specifically the need for personal protective equipment when working with various power tools.

In spite of the fact that manufacturers do their best to secure tools, supplied to the modern market, they still remain rather injurious.

The threat to life and health comes mainly from the electricity itself, the high speeds of the working tools (drills, cutting and grinding discs, saws, knives, etc.) and the high speed of the driven parts.), their flying splinters, accidental uncontrolled emission of chips, shavings and crumbs of processed material, dust, noise and vibration.

Today there is a huge number of different means of protection allowing to save hearing, vision, to protect from mechanical and thermal injuries of all parts of the body. Many of them might seem unnecessary when using a tool in everyday life, but for professionals they are a must.

The modern range of safety glasses is quite large. They differ in material and shape. For working with power tools angle grinders, circular saws, planers, etc. Glasses with clear lenses are used. They consist of a housing in which the glass pane is directly fastened, and BTEs. A headband may also be used as a fixation element.

To protect against small solid particles flying from the front and from the side, open glasses are sufficient. If there is a possibility of multi-directional ejection of solid particles, closed glasses with direct ventilation are preferable. But if there is a large accumulation of dust, e.g. as in the case of grinding machines, or if nonaggressive liquids are sprayed (e.g. when wet grinding), then closed, indirectly ventilated goggles are the best solution.

Taking into consideration possible force of traumatic particles impact, the velocity of which can equal 45 m/s and more, it is better to pay attention to goggles with glasses made of special polycarbonate. They are characterized by high durability and with proper care are not subject to abrasion.

Safety glasses must be selected according to the nature of the work to be performed and the possibility of individual adjustment for a secure fit on the head. There are models that can be used over spectacles.

In order not to sweat glasses it is possible to treat them with special compositions, and it is also possible to do with improvised means to rub the inner surface of glasses with child’s or glycerine soap and polish it with velveteen.

Face shields are more practical because they protect not only the eyes but also the skin of the face and neck from mechanical damage.

the most popular types of helmets for power tools are head- and helmet-mounted ones (if a helmet is worn, of course), with movable or fixed glass holders. Such masks are made of strong polycarbonate glass, including three-layered, and may contain an additional steel mesh.

Most power tools designed for work that generates large amounts of dust are equipped with special dust collectors or are fitted with nozzles for connection to an industrial vacuum cleaner. But for example in drills, rotary hammers and demolition hammers built-in dust exhaust systems are quite rare, and in this case the user must take care of respiratory protection himself.

The simplest means of protection in this case can be serve disposable gauze masks. They are not burdensome to wear for a long time, but, alas, not always effective enough. If you often have to deal with works of this kind, it is better to buy a professional mask with a changeable filter. full-face masks do not need safety goggles. If you buy such an accessory once, you do not have to swallow dust when you are cutting and drilling in concrete, sawing wood and other intensive works for a long time.

We know that no power tool is completely silent. During operation, they produce the most unpleasant of all percussive noises.

Practice has proven that repeated long-term exposure to noise levels of 70-90 dB can cause significant impairment or even loss of hearing, and the manuals of most power tools indicate a possible level of 85 dB. This means that the wearing of ear protectors, earmuffs or ear plugs is compulsory in all intensive work. The choice of both is extremely wide.

Earplugs are available as single-use or reusable, with a lanyard or hard rim. In terms of full headphones, you can find electronic ones with the ability to adjust the level of external sounds to suppress loud ones and amplify weak ones.

See also  Wood hacksaw for precision work

Prefer to listen to music while working? And that’s not a problem, since there are headphones with a built-in stereo receiver. Communication headphones absorb loud noises while allowing you to hear normal speech.

Even if you do not work with welding, but only intend to cut steel with an angle grinder, it is worth to get special clothes made of fabric impregnated with a flame retardant. Hot sparks from cutting scatter up to 2 meters, burning and setting fire to easily combustible objects. Oily overalls that aren’t designed for it can cause severe burns.

Chain saws for user safety are equipped with a number of protective features and devices, but when working with them is an integral part of professional activities, it makes sense to purchase special pants that contain in the trousers tabs of durable fiber material. If the saw is thrown, the knee-knee area is most likely to be hit. After tearing the top layer of fabric, the fibers wrap around the headset, which causes the saw to jam, providing additional protection against injury.

Certain work with power tools, e.g. fixing baseboards, installing cable troughs low above the floor, installing sockets, etc. They require kneeling for long periods of time which may lead to joint problems. To avoid them it is a good idea to get a pair of knee pads. They can be made on their own or purchased at a specialized store. Alternatively, special pants with knee s for foam pads may be used.

The hands, which are in direct contact with power tools, probably need protection even more than all the other parts of the body. They are the first to receive scalding sparks, barbed splinters and blows. For hand protection, depending on the job to be done, there is a wide range of specialised gloves and mittens. When buying the latter, it is worth remembering that threaded gloves are not suitable for operating tools, the working head of which performs rotary movements. And these are angle grinders, circular saws, chain saws, drills, rotary hammers, etc. lightweight split leather gloves are universal for use with virtually all power tools, ensuring reliable protection from thermal and physical injuries to hands and wrists. However, they are not comfortable enough in the summertime. For working in heated rooms and during the warm season it is better to get cloth gloves with leather inserts.

Work shoes should be as comfortable and durable as possible, and exclude all kinds of thermal and mechanical injuries. There are specialized safety shoes for welders, turners, riggers and so on. In the first case the accent is made on heat resistance, in the second on prevention of ingress of sharp chips, in the third on the exclusion of self-injury as a result of falling heavy objects, etc.д. What footwear you choose depends on the type of intended activity. For example, when making openings with an angle grinder, protect your feet with steel toe shoes, and if you are going to cut metal, pay attention to the option of shoes for welders. In any case, the shoes should be non-slip, with a non-piercing sole (you never know what will get under your feet), a solid upper and preferably conductive.

In terms of protection against electric shock, it is preferable to have electrical insulating mats at the stationary place of work, and the integrity of power cords should be monitored. In addition, remember that double-insulated power tools must not be connected to a grounded outlet, whereas tools with a grounding contact on the plug (electrical protection class 1) must only be connected to an earthed outlet. If you use the drill as a mixer to mix mixtures and mortars, you should guard against possible electric shock with dielectric gloves.

And of course do not forget about the first aid kit: in case of emergency you should always have on hand bandaging materials, painkillers, styptic, disinfectants and antishock medicine.

And I would like to finish with what we started with the manual. The careful study and strict observance of all requirements and recommendations given in it will make the work with any electric tool as much safe as possible.

This site does not constitute a public offer as defined by Article 437(2) of the Civil Code

Safety precautions at work with angle grinder.

Good day to you all. In a previous post about brake upgrades someone scolded me for working without gloves. I use gloves only in a cold season, but even in a minus 20 working with the drill or the angle grinder I always take them off. Today my garage neighbor inadvertently demonstrated why I do this.

Makita 9565cv angle grinder. 1400 watts and with RPM support. Good thing it has a bite guard, otherwise it ended up not with scratches but much more serious injuries.

SZ. And I also have one superstition, after getting even a small scratch you need to make a sacrifice to the tool, clean, lubricate, change the brushes)))

Комментарии и мнения владельцев 159

Had a similar situation, only wound up jeans that weren’t hanging like sleeves. I wound my hands on a brush head like Maxim’s in the article. The jeans were old and not very strong, so at the moment of contact (I do not know how it happened with my colleague) a piece of jeans ripped (not completely torn from the jeans) and wound up. Angle grinder hit the groin and stopped, because at that point it had already coiled a piece from the knee to the groin. The angle grinder was twitching and trying to twist and rewind furtherI managed to pull the plug out of the socket.The whole knee to groin area was torn more than the hand in the photo, but the pussy was not hurt. ahahahahaha

That’s right.Don’t work with spinning objects while wearing gloves and long sleeved clothing.To keep it from winding on the shaft, roll up your sleeve)))))

Most likely, everyone will stick to their opinion. I’m not going to change anyone’s mind.I was talking about gloves with a rubberized layer, like…cc7cec84261727b624827.jpgSomebody might say, that it is uncomfortable or my hands sweat, but for now I still have all twenty fingers in one piece.I had a wire nozzle come apart once, and it was only because of these gloves that my hand didn’t look like a porcupine.Now about this post.Yes, wearing those rag gloves is even more dangerous when working with an angle grinder. in addition to the fact that if you get caught, it will wrap your hands tightly, so the machine will not work as well, it slips.And in general, if the angle grinder bites, twitches, if it vibrates while working, it means either you do something wrong or the nozzle is worn out / unevenly worn (this applies to both discs and various brushes, crowns, circles, etc.). д.) I’d rather be healthy and buy a 150 worth of gloves, face shield, a new wheel or brush than get a stitched up leg/hand and a torn pant/sleeve.

Angle grinder VS gloves

It’s like the TA says you should always work with these kinds of tools without gloves and only with a protective shield in place

Like?If you just look at least pictures on the Internet about the work with the angle grinder, then 95% of them you’ll see that people are working in overalls with sleeves fastened, wearing cuffs or gloves and sparks are flying at their feet and not from themselves. And if someone decided in shorts and flip-flops “in a hurry” to chug or saw something, they are just naive, believing that they will get away and nothing will happen, “a hundred times did so. A hundred times have done, and the first a hundred hands will tremble or something, and the nursing staff because of such presumptuous will always work.

And tell me about kevlar gloves (I saw them on ali, they look like calcs) how they work?


Well, if I understand correctly there should be a lot of bite, not a glove.

the principle is clear, but the roller spindle bite hard, and a glove angle grinder I think the same will not replace the hand / foot ( TTT anyone will not wish) It seems to me a defense to the drive does not jam and did not broke.

First of all, you can not work with an angle grinder with gloves on. Secondly, there are even more pragmatic, I think it was. The part should be secured and hold the angle grinder with both hands. And such as in the photo usually occurs when you hold an angle grinder with one hand and the other hand holds the part. the result is expected))

IMHO, wrong choice of means of protection. Gloves / mittens made of split leather or thick leather should be. They are not screwed into the tool, but exactly cover the skin of the workman)

Due to the density. will break through, or rather saw the top part, gives a signal that the hands are no longer where it’s supposed to.

Safety when working with an angle grinder

“angle grinder”. this is a simplified, has long been the popular name of the angle grinder. It is used everywhere: and in construction, and in agriculture, and in private household work. Designed for grinding and deburring surfaces of all kinds, for cutting metals of any thickness, stones and other materials. This power tool got its unofficial name due to the country of origin. Bulgaria.

Operating element of the angle grinder is a special disc, the configuration of which is selected depending on the material to be processed. The high-speed rotation of the nozzle disc can cause at least wounds or cuts, and in more serious cases, serious injury, if the craftsman is not careful.

Failure to comply with safety regulations makes the angle grinder an extremely dangerous tool, so certain rules for working with it must always be strictly followed.

| Denial of responsibility | Contacts |RSS