Hay trimmer for power tiller with his own hands

Nurse

Horror movies often use nurses as maniac characters. First, prepare the basic kit. It doesn’t hurt to have a proper zombie makeover. Here’s a step-by-step guide on how to do a makeup job.

You can also just put on a long hospital gown, but that does not scare anyone. It is better to sew it yourself, giving it a little otherworldly charm. To make one, you can use this guide as a base.

power, tiller, hands

How to do it

Perhaps the most interesting option for self-assembly is a mini-tractor breaker 4×4 homemade,

  • The frame structure will consist of two parts. longitudinal members and crossbars. Longitudinal rails are made of three components. The front part will be made of channel 0, the latter one will be made of steel tube with parameters 8×8 cm.
  • The rear traverse will be made from a channel 6, and the front one. from a channel crossbeam are made similarly. In principle, all self-made mini-tractors have a similar frame design, with the same technical parameters.
  • As the engine can be used almost any power unit, the power of which will be sufficient to carry out agricultural work. In this case, the ideal solution would be to use a water-cooled 4-stroke diesel engine.
  • Gearbox and PTO transfer case can be taken from GAZ-53. The clutch is designed for GAZ-52.
  • When connecting the clutch and the engine, there may be certain problems. You will have to re-manufacture the flywheel of the motor, as well as make a new cover for the clutch basket, to fit it to the engine. The flywheel is ground on a lathe, cutting off the rear area, as well as turning an additional span in the middle.
  • In general, homemade mini-tractor involves fitting under certain parts, so you should be prepared for the fact that you will have to turn to a turner for grinding some components.
  • The axle is installed almost without changes. It is attached to the frame with four step bars.
  • As the wheels can be used similar, taken from passenger cars. But here is an important nuance: the front wheels should be about 14 inches, which is the optimal value for the wheels of the front axle.
  • The thing is that the use of a smaller diameter can provoke the unit to fail in the ground, and the use of a larger diameter will lead to the inability to perform certain maneuvers.
  • The chassis diagram of minitractors and miniautomodels, shown below, clearly shows the principle of the location of the wheels on the axes, as well as their attachment to the frame.
  • To increase the maneuverability of the homemade machine, you can install a power steering. You can take it from the old equipment, or assemble your own. For this we need an oil pump, driven by the engine.
See also  How to tuck a line into a STIHL grass trimmer STIHL FS 38

The location of the driver’s seat will be an important stage of the work. It is necessary to position it in such a way that the steering wheel does not rest against the driver’s knees, i.e.е. does not interfere with the free operation of the device.

DIY mini-tractor baler has a very important advantage. they have very good indicators of maneuverability. Of course, this method of assembly is a bit more complicated than the alternative ones, but it’s definitely worth the effort

In general, in this method of assembly, a lot of components are taken from old domestic cars. For example, the steering rack can be borrowed from old “Zhiguli”, the same can be said about the drum brake. it can also be taken from a used car.

HOMEMADE BALER FOR HAY. YouTube

19 Jul 2015. 8 min Added by user danil ilinyhDescription PRESS PACKER AT WORK PRESSING WITH A COUPLE OF SENO.

A hay picker for a power tiller with his own hands

In this thread will be posted lyrics of the band “Murderers”.

Homemade CULTIVATOR for TRIMMER ?! Easy Hack TRIMMER! TEST

Vika (Cynfael) Tell me which songs, because in many, all the words are obvious.

Viktor (Symon) Given the complaints that the tracks are “quiet”, the people are all. Let’s start with everyone’s favorite but me, Tiger (both versions). And then the Selebs.

Viktor (Symon) Vika, that’s good, that’s good. Now Andrei, ChGK and Ludar. And then Russia and Ilona.

Rafael (Yeghisapet) Jaropolk, in Russia everything is clear, no matter how symbolic.

Viktor (Symon) Rafael, there are always those who don’t understand.

See also  How to put a spring on the grass trimmer starter

Powdered alcoholics, tell me, show me Powdered alcoholics, tell me, show me Killing, drinking vodka, getting merry Killing, drinking vodka, getting merry

Let’s go Russia Let’s go, let’s go Let’s go beautiful Let’s go, let’s go

Come on, Russia Come on, come on Come on beautifully

Vova walks in curlersCome in and come inOpen, killDance, danceVova walks in curlersCome in and come inOpen, kill.

Come on, Russia Come on, come on Come on, beautiful Come on, come on

C’mon RUSSIA C’mon, c’mon Let’s go, let’s go Pretty C’mon

In Sochi there’s snowy hachis and hachis and hachis and hachis and hachis and hachis and hachis and hachis and hachis and hachis and hachis and hachis and hachis and hachis

Viktor (Symon) In the Russian concert version in the second verse instead of “kill” you hear “fly away”.

You ain’t no rock star, you ain’t got no girlfriends Your only friend. Mikhail KrugMorning, Monday, Sunday, SaturdayBored with work. Quit your job

But who are you, who are you, who are you without a job What have you done for hip-hop in your years Who are you, who are you, answer me sir You. ♪ The homegrown BFF ♪

You’ve got a carpet with Jesus the shop workerA book by Chekhov and a poster with ChekhovaMorning, Monday, Sunday, SaturdayYou’re sick of work. Quit work

But who are you, who are you, who are you without a job What have you done for hip-hop in your years Who are you, who are you, answer me you. domestic LOUDER

Saturday. On TV What? Where’s? When? I’ve always loved Borschevsky and BurdaI want to get my hair dry, but I don’t want toHere’s my contact, let’s get lost in the game.

What? Where? When? ¶¶ Playin’ forever ¶¶ ¶¶ Rollin’ around ¶¶ ¶¶ I’m listenin’ to rock ¶¶ ¶¶ What ¶¶? Where? When? For me forever What’s our life. THE GAME

Inna Druz, I’m staying with youMaxim Potashev, I’m naked. you’re readyInna Druz, I’m staying with youMaxim Potashev, I’m undressed. you’re ready

See also  Adjusting carburetor on my Honda 135 tiller

What? Where’s? When? ¶¶ The game’s forever spinning ¶¶ And I’m listening to rock ¶¶ What? ¶¶? Where? When? For me forever What’s our life. GAME

Ilona Drozdova. is a producer with experienceShe knows how a band should perform with gustoIn what order the songs should be playedNow I know how to perform

Ilona, Ilona, I want to be a star In Tomsk showbiz open the door for me Ilona, Ilona, I want to be a star I got material, it’s up to you Spin

Ilona, thank you, I’m the best nowI know for sure, I’ll be a successI’ll be a star in two yearsI’ll be on stage with the band NO

Ilona, Ilona, I want to be a star In Tomsk showbiz open the door for me Ilona, Ilona, I want to be a star I got material, it’s up to you

Viktor (Symon) Peter, where did Ilona’s last verse go??

Viktor (Symon) Peter, what is it about faggot and p?

Alexey (Trishelle) Yaropolk, yes, it’s all lies

Vadim (Rebekka) What for, I don’t understand? It’s self-explanatory.

Ivan (Deiphobos) It is better to attach in the audio recordings themselves, it will be much more convenient.

Viktor (Symon) Give LGBT texters, 30s, Proud, Fighting over broads, NLB.

Tags: hay baler for power tiller with his own hands

Roll type baler

The bale press is the most popular because of its positive features:

  • Compactness;
  • Small size makes it easy to store when the unit is not in use;
  • Affordable Cost;
  • Ease of operation;
  • Ability to make the middle of the bale unconsolidated;
  • The resulting blocks are the same size.

Rolling models have a smaller working width and speed than similar equipment of the standard type, but they can be used with most power tillers.

The design of the hay baler for a power tiller of the bale type:

  • Drum;
  • Grate;
  • Pressing Belt;
  • Transporter;
  • Tensioning and knitting unit;
  • Shaft;
  • Electrical system (buzzer and light indicators);
  • PTO power unit that drives the machine.
| Denial of responsibility | Contacts |RSS