How is the Viking motorblock gearbox. Viking 560

viking, motorblock, gearbox

Viking 540 Unine tractor renovator repair

Has recently become the owner of Viking VH 540. With the main function. the cultivation (chernozem) Viking did perfectly. Potato reckoned (soil.bearing 340 (g. Poltava), the censor is the most common)- quickly, but hard, I think that an adjustable coupling is required and practice. There is no other hinged yet. I would like to have a potato.cutter, but probably not yet to reduce the move and you should buy. By comparing the detailing of the VH 540 model with VH 660, I think that it is possible in the future it will be possible to add the missing parts from the VH 660 configuration. change the pulleys for three belts and get a lower gear. I will be grateful for the information on the search for a collection of repair guidelines Viking VH

Zapadnasibir wrote: Viking VN-540 motor-cultivator who will say

Nothing special. Reducer welded, if that, change the whole. The pulley of the led plastic. Original gear belt 1120 mm, you will not pick up. I digested half the rams on my own, now they are suitable from the car. The mills are good, but the sharpening is 2 third-party, there is no protection for the gear seals. It is inconvenient to load one, added a pen and cut the wings. Air filter is not in place, there is enough air from below. Club on snot. But while he suffers, the 2nd year. True, only cultivation. About the reduced. There is nowhere to increase the pulley, the host is also less than nowhere. Only if a parasite.

Vvell wrote: About the lowered. There is nowhere to increase the pulley, the host is also less than nowhere.

But the model 660 has a reduced one, because it is implemented

Lel in the picture you can’t remove the size. And according to the reference book mines the diameter of the pulley for the belt profile “A” 63 mm. On mine costs about 30 mm, much less. And this is an ungrateful lesson, Ratsuhi on the bourgeois technique. There is no usual 6th safety margin of safety for us. If hu, then you can. IMHO.

Vvell wrote: Yes, and the ungrateful activity, Ratsukhi on the bourgeois technique.

About an ungrateful lesson no-no. But if you replace some details, then why not? I carefully examined the drive of my MK, it even has a place for a cable for turning on a reduced gear (photo1). The engines are the same, the size and appearance is the same.

If you purchase cuneiform pulleys from VH 660 (Google indicates that there is sale), wedge belts 131000,131060 and 1/2 ”1050 (I omit the little things, t.to. It is easy to make at home) you can get 42 rpm- a slow-wheel drive, 106 rpm of the front-wheel drive, 37 rpm of the rear door and this is all controlled using three levers.

Now MK VH 540 has 114 rpm front drive, 43 rpm of reversing

This is just reasoning, perhaps not everything is so smooth and you have to do (or purchase) hu or dig potatoes with a shovel.

The same.based Viking tractor. Overview of the lineup, attachments, reviews

High-quality gardening equipment from the Latvian company does not look like a Chinese analogue and spreads only through a distribution network.

Mercedes truck is capable of overcoming an angle of rise of 45 ° and even a ford to 1.2 m deep.

And from this article you will learn what the price of the Toyota fork loader.

Viking has been producing lawn mowers, aerators, mini-tractors and similar products for 85 years.

Experience has accumulated a solid, wide contingent of users proves that new developments are being implemented successfully and timely. The device is designed to bring the soil into proper form before planting or after harvesting.

Digging, removing weeds, loosening, digging up beds, effective fertilizer and many other operations are performed by this tool. Equipment complexes are conceived by the manufacturer as an additional bonus that is not included in the configuration.

As a rule, there is no need for them, because the implementation of all operations is carried out due to the usual loosening of the soil. the only skill of any cultivator (do not confuse with multifunctional motoblocks).

Another thing is what means and power the technique has to perform its function.

  • Enriches the soil with oxygen, digging it.
  • Processes roots of weeds.
  • Grinding dry soil blocks.
  • Swarms furrows for planting tuberous crops.
  • Serves as a kind of “mixer” when introducing fertilizers or sand.

Using the Viking cultivator, you can also clean potatoes.

There is no chassis in this agricultural machinery, so you are responsible for its movement on the land plot.

Static load will be no less complicated than dynamic with a shovel in the hands. But here, Viking has its advantages:

  • Hands adjustment in accordance with the requirements of the operator. They are also added to the transport position.
  • Anti.vibration system connects the handles and engine.
  • Small mass is advantageously affecting the duration of work.
  • Low engine location provides a convenient balance and light speed of the device.
  • Working nodes are under panels. This reduces the risk of injuries when working with the cultivator.
  • Simple maintenance will not require special skills and tools.

The heart of the cultivator is a gasoline engine that is one of the three recognized in the world the best. This is Briggs-And-Stratton.

Later models are already on Kohler. Such engines surpass electric for obvious reasons: the wire does not interfere and does not limit you in space.

The fuel mixture does not need to be prepared. The engine is pre.lubricated, so you only fill gasoline, without oil.

The combination of worm and cuneiform transmission has both advantages and disadvantages. This feature allows the tool to effectively loosen the soil with a low weight and a small fuel consumption. But the belts wear out quite quickly.

Reviews of many users indicate that the width of the capture of Viking cultivators (45-85 cm in different models, especially in 585 and 685) is quite convenient for processing the soil in hard-to-reach places. In addition, it is regulated.

Viking 440 Technical characteristics

If you want to process light or moderate soil between closely growing crops, then we recommend a particularly narrow one.like VH 440 tractor. It is equipped with a set of 42 cm wide and back and reverse. The main features of the Viking VH 440 cultivator:. a powerful four.stroke American Briggsstratton engine with a light launch;. a handle with height adjustment, folds for compact storage;. adjustable prophet limiter;. support wheel for convenient transportation, rises in front during operation;. strong chain gear;. durable prophetic knife, lifelong guarantee for destruction;. small width for convenient movement between narrow rows of plants;. protective discs to protect plants in rows with close growing crops;

Specifications:

Engine manufacturer: Briggsstratton (USA)
Engine model: BS I/C 475 Series. 148 cubic meters.cm.
Engine’s type: 4 stroke
Engine power (kW): 2.6
Engine power (l.With.): 3.5
The volume of the fuel tank (l): 1.9
The volume of oil in the crankcase (L): 0.6
Clutch type: belt
Reducer type: chain
Number of speeds: 1 forward/1 ago
Steering column: adjustable in 1 position
Earth cultivation width (cm): 42
Earth cultivation depth (cm): thirty
The dimensions of the cultivator, dxshxv (mm): 1430x490x820
The dimensions of the packaging (DXShXV): 600x420x680
Noise level (DB): 93
Mass (kg): 39
Producing country: Austria

Our recommendations in the purchase of additional equipment for “Cultivator Viking VH 440 (6226-011-3911)”:

Interesting information about section: Cultivators, motor cultivators

Inside bevel gearbox #bevelgear #gearbox #industrial

Garden cultivators are ideal for working in the garden. They are easy, compact, easy to manage, but at the same time they are quite productive to dig all your beds in a very short period of time. We offer you cultivators in the production of world.famous companies that have a long development resource and affordable cost.

Values ​​are subject to change without notice. You can clarify the characteristics by calling us by contact phone. The store is not responsible for the inconsistency of the characteristics indicated here by the real.

The same.based Viking tractor

The Austrian company Viking has existed since 1981. Since 1992, this manufacturer of motor vehicles has united with the Stihl Corporation. Viking motoblocks are known for the quality of the assembly, high reliability and first.class service. All units are tested in workshops in production, and then, in the conditions of work in the fields.

The Austrian manufacturer Viking is designed for country and garden work, it is popular in many countries of the world.

The purpose of the Viking motoblocks:

  • any work on garden, country, garden areas;
  • plowing land, work with soils of any complexity and degree of humidity;
  • communal work (cleaning, cleaning);
  • household purpose, including transportation of goods.

All Viking motoblocks are designed for domestic use. On an industrial scale, more severe and powerful equipment is used. A distinctive feature of the Viking brand is the presence of a patented solution in each of the model lines of motorcycle equipment.

Viking motoblocks

The equipment may vary depending on the model of the unit!

Design features

Convenient auxiliary wheels are installed on the models for easy transportation of cultivators. Manufacturers provided for the installation on the handles of a special vibration.absorbing system, with the help of which the long.term operation of Viking cultivators becomes even more convenient. For increased safety for rotating nodes of cultivators, special fences are installed.

Engine and power

Viking cultivators are equipped with powerful foreign engines that easily perform a wide range of tasks. Engines are located in the lower part of the frame, which adds an increased balancing unit. The Viking one.based tractor is represented by models with different capacities, this allows you to choose the most suitable option for yourself.

Powerful engines are equipped with Viking cultivators

Ease of maintenance

There are no difficulties in working with Viking units. Equipments are very convenient to maintain, since the most common 82nd and 95th gasoline is used for operation.

Choose oil depending on the season and stop at high.quality products.

Fuel consumption

According to manufacturers, Viking cultivators are economical in fuel and oil consumption, in comparison with similar technology of other manufacturers. The exact consumption of gasoline depends on the model of the unit and the power of its engine.

Easy control

There are no difficulties in working with this technique even for beginners. Before the first launch, be sure to read the instructions. All the nuances and subtleties of working with technology are clearly and available there clearly and accessible. Simplicity and ease of management are one of the main advantages of Viking cultivators.

The difference between the line of small Viking technique

Viking cultivators are designed to work on small private possessions. The professional class of models has great opportunities. Mark Viking is respected, is in demand. The company’s policy is in the motto. the employee must plow on technology, but do not plow. Creating new models, manufacturers refused to use two.stroke engines with their shortcomings. On all medium and light models, American Briggs are installed, powerful, the latest models are equipped with Kohler. Starting the electronic ignition system. Air cooling, there is a filter on a fence pipe.

The transmission of the torque in the cultivator Viking is a craft, the gearbox is used worm, reverse. The layout allows you to create the stability of the model, excluding overturning on an uneven relief. The vibration absorbers installed between the engine frame and the handle reduce the fatigue of the hands. All rotating parts are fenced, but the mechanisms can be adjusted, you can manually capture. Everywhere there is a light installation and a thoughtful mount.

Viking cultivator differ little from domestic models with much greater reliability and functionality. We present several of the most characteristic samples of the technology of a well.known manufacturer.

For any cultivator in the kit, there must be instructions for servicing a model. Please study it before turning on the engine. You will find a lot of interesting things in it, even if you previously used a similar unit.

Non.mounted equipment

Viking motoblocks, despite low weight and average capacity, are in demand and popular. Awaken equipment allows you to significantly expand the functionality of the units, and the good assembly quality and engine parameters make this equipment a reliable assistant at any time of the year. The manufacturer offers a wide selection of tools for this type of motorcycle engineering.

Frases

Viking is equipped with milling cutters in an amount of 4 or 6 pieces (depending on the model of the walk.behind tractor). Additionally, you can purchase mills in the sets: Viking ABS 400, Viking AHV 600, Viking Aem 500 and others.

Assembling and installing mills on these units is similar to installing mills on other motoblocks of light and medium weight. Figure 1 shows the cutting diagram of the cutter.

Hiller

The manufacturer offers to work with the Viking motor blocks of the censuses: Viking Abu 440 (for models VH 400, 440), Viking Abu 500 (for models VH 540, 660), Viking AHK 701 (for models of motor units from the HB series. 560, 585, 685).

Viking AHK 701

The main purpose of this equipment: cutting of the furrows, loosening, rummage of aisles.

Mower

Viking lawn mowers. a separate type of equipment that the manufacturer implements along with motor blocks. It is not recommended to use grass with the Viking walkover for mowing grass with the Viking motornote.

Ground.spaces

Models of soil-spaces: Viking premium 34 cm, 340×110, WM-500. You can use Pubert, Husqvarna, Gleindale, Robix, Solo.

Potato.cap

Model of potato.cutting, suitable for all modifications “Viking”: AKP 600. It is allowed to use potato.cutter from manufacturers Pubert, Husqvarna, Gleindale, Robix, Solo.

Model of the Viking motor-carrier: Any, designed for light motoblocks, for example, a single-row-row-row-row-row-row-row, with a capacity of a 20-liter bunker and for a diameter of tubers 50-100 mm.

Additional equipment from the manufacturer, which may be less often required than the above: sets for plowing soft soil, universal coupling, howling, wheel sets, looser, sets for removing moss.

Service

Before the first launch or after prolonged downtime, a run is must be carried out, which extends the engine service life and allows all the details to be lost to each other. The procedure for running a little time and does not require significant effort.

Certain actions should be performed:

  • Check the presence of motor oil.
  • Run the engine and leave to work at low speeds for 30 minutes, periodically including the gears.
  • The next 8 hours can be used at half power.
  • After the end of the running.in, drain all the engine oil and replace the new.

Such actions will help maintain the performance of the engine and large nodes. It must be remembered that the lubricant and gasoline should be refueled according to the recommendations of the manufacturer.

Below is a video review where you can clearly watch how easy and just work on the Viking HB 585 walk.behind tractor

Since all models are equipped with 4-stroke engines, the appropriate oil should be filled. The same depends on the seasonality of the work. Most oils have a viscous structure, so the use of semi.synthetic oils in the cold will not be effective.

Since the cooling system on Viking motor blocks is used, you should monitor its cleanliness. Of particular danger is work on dry soil, since dust penetrates inside the casing and settles on the nodes and elements of the cultivator.

Causes of breakdowns and elimination of problems

Independent repair of cultivators is possible in case of other problems. For example, it happens that you need to replace the candle when the device does not start or swimming when loading. When carburetor is polluted, gasoline enters the air filter.

Candle replacement may be required due to the oxidation of contacts, insulation violations, and soot accumulations. The element is considered completely failed in the absence of a spark of ignition. Sometimes it is enough to clean it, rinse in gasoline and can be installed again in place.

When the engine speed swim, the piston and other components are broken down. The regulation of the ignition system will help to avoid premature wear.

  • Inspect the engine flywheel and check it with opening the contacts that are inside the unit.
  • Check the distance between the “anvil” and “hammer”. one of the important components of the system.
  • Manually carry out the movement of the flywheel before the piston squeezes.
  • Return the part to the place. The emerging one.time knock indicates the operation of an overall coupling.
  • Turn the flywheel against the passage of the hours until the points located on the case.
  • Adjust the distance between the contact and the “cam”. For good ignition, the minimum is the minimum. 0.25 mm, and the maximum is 0.35 mm.
  • Further, the adjusted part is fixed with a screw.

Compliance with the rules for servicing a cultivator air filter is one of the important conditions of long.term operation of the unit. In order not to worsen the quality characteristics of the motor, the filter must be cleaned after each use of the device. For this:

  • Gently remove the lid;
  • Take the paper filter in your hands and inspect;
  • peel a soft rag or brush;
  • Wash the space thoroughly before the intake hole;
  • It is recommended to wash the tube in soapy solution;
  • The purified element must dry;
  • For better work, you can lubricate the part with oil;
  • Be sure to remove excess lubricants;
  • return the element to the place, making sure of the correctly collected components;
  • If there is too much dirt, replace the spare part.

The car will provide the correct storage for a long service. Before conservation, the cultivator must be cleaned of dirt. The purified surfaces are wiped dry by a rag and treated with lubricants that prevent corrosion. To store the cultivator, you need to choose a dry and clean place.

We present you a brief video review of Viking cultivators.

The same.based Viking tractor. Overview of the lineup, attachments, reviews

High-quality gardening equipment from the Latvian company does not look like a Chinese analogue and spreads only through a distribution network.

Mercedes truck is capable of overcoming an angle of rise of 45 ° and even a ford to 1.2 m deep.

And from this article you will learn what the price of the Toyota fork loader.

Viking has been producing lawn mowers, aerators, mini-tractors and similar products for 85 years.

Experience has accumulated a solid, wide contingent of users proves that new developments are being implemented successfully and timely. The device is designed to bring the soil into proper form before planting or after harvesting.

Digging, removing weeds, loosening, digging up beds, effective fertilizer and many other operations are performed by this tool. Equipment complexes are conceived by the manufacturer as an additional bonus that is not included in the configuration.

As a rule, there is no need for them, because the implementation of all operations is carried out due to the usual loosening of the soil. the only skill of any cultivator (do not confuse with multifunctional motoblocks).

Another thing is what means and power the technique has to perform its function.

Viking Gearbox Removal and Installation by Dave.

  • Enriches the soil with oxygen, digging it.
  • Processes roots of weeds.
  • Grinding dry soil blocks.
  • Swarms furrows for planting tuberous crops.
  • Serves as a kind of “mixer” when introducing fertilizers or sand.

Using the Viking cultivator, you can also clean potatoes.

There is no chassis in this agricultural machinery, so you are responsible for its movement on the land plot.

Static load will be no less complicated than dynamic with a shovel in the hands. But here, Viking has its advantages:

  • Hands adjustment in accordance with the requirements of the operator. They are also added to the transport position.
  • Anti.vibration system connects the handles and engine.
  • Small mass is advantageously affecting the duration of work.
  • Low engine location provides convenient balance and lightweight device.
  • Working nodes are under panels. This reduces the risk of injuries when working with the cultivator.
  • Simple maintenance will not require special skills and tools.

The heart of the cultivator is a gasoline engine that is one of the three recognized in the world the best. This is Briggs-And-Stratton.

Later models are already on Kohler. Such engines surpass electric for obvious reasons: the wire does not interfere and does not limit you in space.

The fuel mixture does not need to be prepared. The engine is pre.lubricated, so you only fill gasoline, without oil.

The combination of worm and cuneiform transmission has both advantages and disadvantages. This feature allows the tool to effectively loosen the soil with a low weight and a small fuel consumption. But the belts wear out quite quickly.

Reviews of many users indicate that the width of the capture of Viking cultivators (45-85 cm in different models, especially in 585 and 685) is quite convenient for processing the soil in hard-to-reach places. In addition, it is regulated.

Viking Unoa Tractor: HB-585 motor-cultivator, technical characteristics of Viking VH-540, operating instructions

The same.based tractor for the farm is the best assistant for the household farmer. The motor.cultivator will help to loosen the ground faster and more efficiently than manually, which means. to achieve an excellent crop with minimal efforts.

Equipped with the best American and Austrian engines, durable milling cutters, a plow-bush and other attachment equipment, modern Viking brand motoblocks are produced in several trim levels, differing in equipment and width of the capture.

About the manufacturer of viking motoblocks

The Austrian company Viking has been operating since 1981., Since 1992. Visit Stihl Corporation. The brand is famous for the first.class service and convenient to manage reliable equipment. Before entering sale, all devices are tested at the stands of the workshop and in the field.

Garden technique of the Austrian brand is in demand among farmers and gardeners. The manufacturer offers a diverse assortment of agricultural equipment for simple and effective cargo care.

Viking strictly monitors the quality of its products and constantly offers the latest developments to modernize technical characteristics and improve efficiency. Almost every brand line has patented solutions.

Motobobes Viking, Caiman, Patriot, Texas, the foreman, the crosser are capable of plowing and loosening of regularly cultivated and virgin lands. They copes with clay and fertile soil, demonstrating a spectacular result. In any model, the width of the capture is regulated.

Motobobes Viking, Forza, Sadko, Don, Huter, Pro, Lander, Champion, Carver, Husqvarna can be used in the summer cottage for:

The manufacturer equipped the unit with a powerful engine and a carefully thought.out design with a balanced reduced center of gravity. Viking cultivator is the best in price/quality ratio and has already earned the love of many people who worked with it.

You can choose a motor cultivator depending on the area of ​​the processed site and the planned volume of work.

Read more about the work of the Viking motor block, see

Reducer device on the Neva motorblock

The Neva motoblock gearbox is responsible for the transmission of rotation coming from the motor to the wheels and hinged tools. He controls the rotational number, speed, as well as the direction. forward or backward. In principle, a gearbox for models MB 2 and MB 1 is not much different, so here we will consider the second option. The device of the gearbox is made so that on its outer part of the body are the components necessary to change the gears.

GPP lever has 5 positions. When you click on it, the fork removes the clutch from the hook. When you throw a lever, the fork resumes its original position. The same.based tractor will be suspended when the drive will be connected to the right penis. The torque goes from the asterisk. Когда ручка утоплена, цепляя левую звездочку, передача понижается. If you need the highest gear, you need to put the handle to the end.

Reducer malfunctions and repair

Like any other technique, motoblocks can also fail. If the problem lies in the gearbox, you need to disassemble it and fix it. Often the breakdown is insignificant and you can easily cope with it yourself.

First you need to carefully clean this part of pollution and oil residues, which will also need to be drained. All parts need to be inspected and checked for damage. If something has failed, this needs to be replaced. Use only new elements that are suitable for your Neva Motoboblock model. Also do not forget to pour oil after assembly.

Some common breakdowns of the gearbox:

  • a spring or fixators broke. They need to be replaced with new ones and then configure;
  • Settings were lost in the switching system. You need to weaken the screws, turn on the first gear, tighten the screws back;
  • Oil oozes through the shaft. Most likely the reason is the cuff that has worn out. It needs to be replaced with a new. How to replace the oil seals? It is enough to extract the old ones, pushing them with a screwdriver or other object, and establish new ones;
  • There was a jamming. Perhaps this is due to a chain break. It must be replaced with a new one;
  • You cannot fix the program. The reason for the wear of the fork brush, so it needs to be replaced.

These are the main and most common breakdowns of the gearbox. It is very important. if you cannot eliminate the breakdown yourself, then you should seek help from professionals.

Types of gearboxes for purpose

Depending on the sphere where the device is used, converters are divided into the following types:

  • Corner gearbox. used in mechanical engineering to equip certain cars and industrial equipment.Such a converter makes it possible to operate the machine under high loads;
  • Reducing gearbox. applied to increase power. For example, this becomes necessary when processing the soil, when the wheelbarrows begin to slip, and it is necessary to increase the power of the motor.This kind of device of the motor.block gearbox is used in the production of diesel and gasoline equipment with an air cooling system. Collecting a reducing gearbox for a walk.behind tractor with your own hands is much easier than the designs of other types;
  • Gear converter. used in heavy motoblocks and some cars.The transmission consists of differentials, regulators and boxes;
  • Worm converter-used in the production of motoblocks and mini-tractors. This design has gained popularity due to reliability and long service life.

As a rule, such a gearbox is equipped with a reversal function, which makes it possible to use the rear course of the technique.

Self.manufacture of a gearbox. just about a complex

Each of the listed types of converters has its drawbacks. Therefore, in order to repair the motor block gearbox as little as possible, some farmers prefer to equip their equipment with home.made converters. DIY.made design is not rarely obtained better and reliable. For work, you will need:

First you need to cook the case. To do this, you can use stainless steel plates. For work you will also need gears and shafts. They can be “borrowed” at the fuss “Friendship”. In this case, inside one of the tool shafts, you need to drill a hole. On the opposite side of the gearbox, it is necessary to install the second shaft, and after it. bearings and a clip. The output shaft of the device is attached to the pulley. After that, the finished device should be placed in the previously welded housing and pour machine oil inside.

The made converter is connected according to the same principle as the standard gearbox. At the same time, pay attention in what position each gear is located. Elements should not be skewed, and their teeth should have perfectly even ends without excesses and other deformations.

At the end, you need to test the converter. We advise you not to load it immediately after creating. First, stretch the wound one.axle tractor on the ground. let the elements of the converter connect and establish interaction. Only after that you can use the equipment for its intended purpose.

| Denial of responsibility | Contacts |RSS