How much oil is in the vibrator vibro -plate. The principle of action of vibration stations

Operation of vibration fuels (pre.Flight training, storage and transportation, maintenance of vibration fuels)

What oil is poured into the vibrator of the vibration plate on the Co-310 vibro-resistant, 4-stroke, single-cylinder, internal combustion engine Production of the Japanese company Subaru. The installation of this motor significantly increases the reliability and life of the vibration plate. A unique handle design

Repair of vibrator vibropropels Splitstone VS-245 E8.

The following types of oil are used for vibration fuels:

For models on gasoline of brands such as Honda GX390, GX270, GX200, a mineral motor composition with viscosity SAE10W40 or SAE10W30 is best suited. These types of vibration oils have a large temperature interval, good thermo.Acidic stability. When using them, a minimum amount of soot is formed.

Synthetic oils differ from mineral mixtures at the molecular level. Synthetic elements molecules are synthesized with the given properties. In addition, they are able to wash all sediments on the details more quickly due to high fluidity. Mineral masses do it more slowly.

Semi.Synthetic compounds are obtained by mixing the two previous types of oils.

What kind of oil is poured into a vibro.Plate and how to replace it?

The vibrational mechanism and engine are 2 mechanisms in a vibration plate, which need constant control of the presence of oil and lubrication. Before starting to work with a vibration plate, in the engine and vibrator Vibroophytes

If you say about the vibrational mechanism, then the oil is poured at the manufacturer’s factory. Various types of oils are used at each factory, because there is no certain date of oil substitution. Therefore, with self.Substitution of oil, you need to use the control control control.

What oil should be poured into the engine of vibration stations?

Before the start of work with vibroplitt, it is necessary to fill the oil into its engine. Remember that it is necessary to inspect the level of oil before starting the vibrating plate. In an unpleasant occasion, your technique will fail.

For engines on the gasoline of the brand Honda GX390, GX270, GX200, GX160, mineral motor oil viscosity SAE10W40 or SAE10W3.

There are also oils of other viscisons, but they may not be suitable in connection with the features of vibration equipment, which can also lead to a breakdown of the motor. The most perfect thing is not to carry out any tests, but to use the oil that is recommended according to the annotation for use by vibrating plate.

How often you need to change oil in a vibration plate?

If there are no oil filters in the engine, then you need to constantly change the oil, since pollution appears in the process. You need to replace oil after the first twenty working hours, and then every time after 100 hours. Also, if you have not been used by vibrating plate for a very long time, it is worthwhile to replace the oil.

So, first, the equipment must be placed on a flat surface. Then remove the lid from the hole where the oil will be flooded. Pour the oil to the indicated mark and close the lid.

Now you need to start the engine for a couple of seconds and immediately drown it out. We check the oil level again. If he remained the same as before the start, then you can start work.

How often you need to change oil in a vibration plate?

If there are no oil filters in the engine, then it is necessary to change the oil all the time, because pollution occurs in the process. It is necessary to replace oil after the first 20 working hours, and later every time after 100 hours. Also, if a vibration fuel has not been used for a very long time, it is worth making an oil substitution.

Launching and stopping vibration placers

Often enough in light class vibro.Grade vibrations are consumed by the Honda GX series. On the example of such a motor, we will see the sequence.

Transfer the lever to the Close position (closed). If the engine warms up or the temperature of the air is the highest, then leave the damper open.

Sweep the throttle lever a little from the position of idle.

Switch the motor switch to position I

Make the engine with a hand starter. Pull the starter cable until you feel resistance, then sharply pull it over the entire length. Maybe it will be necessary to pull the cord a couple of times (3-5 times). The number of repetitions can be larger if the engine has not launched for a long time or a negative temperature outside.

After warming up the motor (1-2 min), smoothly transfer the lever of the damper to the Open position (open).

Translate the throttle lever (motor speed) into close to the greatest position.

  • The throttle lever moves to the idle speed.
  • The engine is turned off by moving the circuit breaker to the O.
  • The fuel tap is locked.

The pre.Shit training of the vibration plate

  • Familiarize with the annotation. The recommendation is naturally obvious, but specifically your equipment can own a certain feature, the ignorance of which can lead to a breakdown without proceeding to this work. Therefore, at least quickly, to get acquainted with the annotation all the same should.
  • Checking the oil level. Any vibration plots and vibrors (except electronic) use motor oils. With the missing level of oil in the motor crankcase, you at least cannot start the engine (if the oil level sensor is installed), or the risk of destroying the piston unit. Before checking the oil level, set the vibrating plate in a horizontal position.

Checking the level of fuel. Here, attention should be directed only to the compliance of what you fill into the tank, what is declared by the manufacturer. After refueling, will certainly wipe all the fuel inks, t.To. They can be in unsafe proximity to hot details.

Air filter check. Because Vibroophytes Often they work in an environment with a huge dust, you need to watch the cleanliness of the air filter very often. As necessary, it must be cleaned with an air compressor.

The initial position of the vibration plate. Before starting the vibration fuel, you need to install on a sealing soil. Launching on a hard surface is not very recommended.

Transportation of vibration stations

Here are a few requirements that must be observed during the transportation of vibration fuels:

  • Be sure to check if the fuel valve is closed!
  • Be sure to provide for lifting equipment in PT loading and unloading. The carrying capacity should be at least 50 kg more than the mass of the vibrating plate.
  • The rise of the vibration plate is allowed only for a special eye located in the central part of the frame.
  • Vibration fuels are transported in an upright position in order to avoid oil flowing.
  • During transportation, the vibration pound should be firmly launched with belts behind the frame in more than 4 points.

Vibroophytles are gasoline

Vibroophytus-one of the types of specialized equipment for road construction work-is designed to lay paving slabs, soil compaction, various types of bulk and coherent coatings: crushed stone, gravel, sand, asphalt. The most convenient machine for small volumes of this type of work. The vibration plate allows you to compile soil or road surface in those places where the skating rink is impossible, at limited along the sites: paths, trenches. Vibroopers are often used as a necessary addition to another usually larger type of road construction technique.

Vibration stations, being comfortable and economical, are widely used in various sectors of the economy: landscape design, road construction and repair, various areas of construction. Such machines can significantly reduce manual labor and significantly intensify the production of work.

All models are compact and adapted for numerous transportation.

Vibroophytes, unlike vibrors, have many times greater impact force.

Splitztone vibro.Fuels accounts for 30% of the park of all vibration fuels of Russia.

Modernization of our vibration fuels and equipping them with a new folding handle allowed to ensure the placement of a pair of removable wheels on it. Now the wheels removed from the base are reliably attached to the handle and you can no longer worry about their search after work.

Application

Before pouring or replacing, you should check the oil level in technology. First, the equipment is placed on a flat surface. Further from the hole into which the liquid is filled, the lid is removed. They begin to pour the mixture to the indicated mark, while you should not pour a larger volume. When the oil is flooded in the hole, the engine is turned on for a few seconds, and then turn off. Then again make a check of fluid level. If he remained unchanged, then you can already start working with equipment.

Remember that if special filtering elements are not provided in the vibration fuel, then the oil will have to be changed quite often, because strong pollution will form during use. After the first use, it will be necessary to change the liquid after 20 hours of work. In subsequent times, the fill is made every 100 working hours.

If you have not used such equipment for a long time, then you should also replace the oil before starting work in order to avoid after a breakdown.

The following video will tell the following video about the intricacies of launching vibro.Floppy and technology of oil filling.

How to choose oil for vibration plate ?

Any vibrating plate has two internal mechanisms at once, which require repeating oil level control. This is a vibration mechanism and engine. Before starting work, you should make sure a sufficient level of lubrication in these 2 systems. As needed, it is worth adding working water, but not basically overdoing. If you take a vibration fuel for rent, you can be convinced of the oil level, because the rental company techniques all the time keeps the level of lubricants under control.

If you are disturbed by this issue as the owner of a viborophytus, it is worth knowing that in the vibrational system the oil in fairly quantity is poured at the factory. Each manufacturer uses its own oils, so you can navigate in the replacement time of this water only by the attachment annotation. It is desirable to carry out such an operation with the role of the professionals of the service center.

Taking the vibration fuel to rent, do not try without the help of others to replace some liquids-these characteristics are controlled by the specialists of the Andor company. For you it remains only to replenish the level of fuel. The need for oil valve to the motor can be discussed immediately when applying for equipment rental.

Despite the fact that the Honda engines GX160-GX390 operate on gasoline, only mineral lubricant materials of a shallow type with viscosity SAE 10W30-40 are suitable for them. Other characteristics of viscosity, the presence of additives, etc.D all this can lead to severe breakdowns or vibration stages for rent.

The thing is that this type of engine is not equipped with oil filters. This fact makes a repeating substitution of oil, evenly mixed with pollution, one of the important rules of long.Term successful operation of the motor. In the brand new unit, the lubricant changes after 1 20 hours of functioning, and then already every 100.

The Budget company offers the rental of vibration pins at the most profitable criteria and at the least prices. The technical condition, also the level of equipment liquids are checked by our masters everywhere, therefore, you will not have to select consumables for the units without the help of others without the help of others. By ordering a vibration fuel to us, you will certainly receive a consultation about its operation.

Oil in the vibration plate

So, first, the equipment must be placed on a flat surface. Then remove the lid from the hole where the oil will be flooded. Pour the oil to the indicated mark and close the lid.

much, vibrator, vibro, plate

Now you need to start the engine for a couple of seconds and immediately drown it out. We check the oil level again. If he remained the same as before the start, then you can start work.

Vibrating panties in the restaurant! Video LEGEND!

It will allow you not to worry about oil substitution: this will be done for you!

Lineup vibrasty vs splitztone

VIBRILOTE VS-104 VIBLEPLITE VS-134 VIBROPLITE VS-244 VIBROPLITE VS-245 E8 VIBROPLITE VS-245 E10-2 VIBROPLITE VS-246 E12
Seal modes
Crushed stone Unacceptable Unacceptable Permissible Permissible Permissible Permissible
Soils (mixed soil, loam) Permissible Permissible Permissible Permissible Recommended Recommended
Sand Permissible Permissible Permissible Permissible Permissible Permissible
Paving slabs, paving stones (using a damping rug) Permissible Permissible Recommended Recommended Recommended Unacceptable
Asphalt, asphalt concrete Permissible Permissible Recommended Recommended Permissible Permissible
Specifications
The width of the working area of ​​the slab, m 0.29 0.29 0.41 0.41 0.Fifty 0.43
Dimensions (DHSHHV), mm 995x320x835 1040x320x1000 1055x450x975 1170x450x955 1270x450x1030 1340x500x900
Operational mass, kg (without water / with water) 55 70 /80 89 /99 111 /121 128 /138 141 /151
The depth of compaction of bulk materials over 4 passes to 95%, mm 100 100 200 210 200 250
Forcing centrifugal force, KN eleven eleven thirteen.5 eighteen.4 21.3 23.One
Vibration frequency, Hz 100 100 93 93 93 80
The speed of movement on bulk materials, m/min 20-25 20 20-25 20-25 20-25 20-25
Honda engine, model GX 160 GX 160 GX 160 GX 160 GX 160 GX 160
Engine power, kW (l.With) 3.6 (4.Eight) 3.6 (4.Eight) 3.6 (4.Eight) 3.6 (4.Eight) 3.6 (4.Eight) 3.6 (4.Eight)
Volume of gas tank, l 3 3 3 3 3 3
Fuel consumption, l/h one.4 one.4 one.4 one.4 one.4 one.4
Productivity, apt.M/h 100 100 140 140 170 150
Performance, cubic meter.M/h ten ten 25 28 36 40
VIBROPLITE VS-245 E10 VIBROPLITE VS-246 E20 VIBROPLITE VS-309
Seal modes
Crushed stone Permissible Permissible Recommended
Soils (mixed soil, loam) Permissible Recommended Recommended
Sand Permissible Recommended Recommended
Paving slabs, paving stones (using a damping rug) Recommended Permissible Unacceptable
Asphalt, asphalt concrete Permissible Unacceptable Unacceptable
Specifications
The width of the working area of ​​the slab, m 0.41 0.43 0.Fifty
Dimensions (DHSHHV), mm 980x450x1010 1020x450x1040 1340x500x900
Operational mass, kg (without water/ with water) 128 /138 159 /169 300
The depth of the compaction of bulk materials over 4 passes to 97%, mm 220 300 400
Forcing centrifugal force, KN 21.3 26.6 40
Vibration frequency, Hz 93 80 72
The speed of movement on bulk materials, m/min 20-25 20-25 20-25
Honda engine, model GX 160 GX 200 GX 270
Engine power, kW (l.With) 3.6 (4.Eight) 4.Fifteen.5) 6 (8)
Volume of gas tank, l 3 3 5.3
Fuel consumption, l/h one.4 one.4 2.5
Productivity, apt.M/h 140 160 180
Performance, cubic meter.M/h 32 fifty 72

Read how to adjust the oil supply to the chain of the chainsaw

Inclined Vibrating Screen, working principle (for aggregates, mining industries)

Now on our vibration stations a new folding folding hilt with increased vibration resistance is installed!

The structural features of our vibration fuels are:

The scope of the vibro.Plate

The main scope of vibration fuels is the construction and repair of different levels of complexity, laying sidewalks and roads, arranging sports grounds and much more. Use them both for industrial purposes and for private houses. The uniqueness of this mechanism in its relatively small size and ability to cope in those conditions in which an ordinary bulldozer will not be able to fulfill its purpose. For example, laying the sidewalk or garden path in a private house.

With the help of vibration stamps, tamping concrete, asphalt, sand, gravel and ordinary earth on the lawn. Such a machine is indispensable for laying roads and sidewalks. Work with vibration plate is carried out even in trenches and narrow foundations. Since such a set of mechanism allows him to move in reverse, this greatly simplifies work on the territory of a small area, where there is a need for frequent turns or overcoming obstacles.

General characteristics of the vibration fuel by mass

The mass of the slab is the most important when choosing a suitable model or when selecting parts for the manufacture of vibration fuel with your own hands. This indicator determines 70% of the productivity of the device and its compliance with the work performed. Vibro.Fuel models in this indicator are divided into 4 classes:

Review of the most popular hydraulic drive models

Models equipped with a hydraulic drive have high reliability indicators and do not need special treatment. Simply put, they can be switched to the rear and front line, without having previously dropped the speed by car. Thanks to this, the effectiveness and speed of the work on the work increases significantly. In addition, units equipped with a hydraulic drive is much more reliable than analogues that are equipped with a mechanical type drive.

TSS. CP. 80

The vibrational shaft drive, as well as the control system of this apparatus, is carried out thanks to the hydraulic drive. This device is distinguished by good maneuverability, even when performing tasks, in a limited, small space. In addition, TSS. CP. 80 is characterized by a high level of patency, even on viscous, clay soil. During the soil compaction, the operator can independently carry out the regulation and control of the vibro.Plate shock force.

Equipped with a gasoline engine with a gasoline, with an air cooling system. Dimensions of the sole. 480×350 mm. Fuel consumption. 1.7 liters per hour. Started using a hand starter. Vibration frequency. 6000 per minute. Performance. 650 square meters in one hour.

| Denial of responsibility | Contacts |RSS