How much to add oil to a motorcycle. What oil to choose for refueling in a trimmer for grass or types of lubricants

How to breed gasoline for a trimmer for grass

Depending on the variety of trimmers, they can be seasoned with a fuel mixture or separately gasoline and oil. Now there is a huge variety of types of motor oils that are suitable for different technology, including garden. To choose the right fuel for a certain model of motorcycles, you need to know its technical features and understand the brands of gasoline, as well as liquid lubricants. All the details on how to dilute gasoline with oil for a trimmer for grass is in the material further.

Depending on the engine device, motorcycles are divided into two.Stroke and four.Stroke. In the first case, the piston in the internal combustion engine makes 2 moves in one working cycle, and in the second case. 4 moves. Differences in principle of operation of the engine determine different approaches to refueling a trimmer for grass.

Two.Stroke engine refueling

In ordinary household models, motorcycles are used, as a rule, a two.Stroke engine. The lawn mower is not needed very much power and edification, so it is quite suitable for performing the tasks. In addition, this engine is much cheaper and simpler, but it is refueling with a fuel mixture, which consists of oil and gasoline. Such fuel is poured into a carburetor and is supplied to the cylinder in the form of oil-Benzine fog. Thus, the oil provides lubrication of all the necessary parts, and in the process of operating the engine burns together with gasoline. However, the combustion of this mixture is accompanied by the release of caustic odor and smoke, which increases the toxicity of exhaust gases.

Important! For such motos, you need to use a special oil for two.Stroke engines, which completely burns without leaving a halt, and has low evaporation. And so that it mixes well with gasoline, it includes 20% solvent.

Motokos refueling with a four.Stroke engine

Four.Stroke engines are used in professional motorcycle models. They have high power and can work for a long time without a break and refueling. As fuel, they also use gasoline and oil, but they are poured into different tanks. So. The oil does not participate in the process of combustion, so the exhaust gases are not so toxic.

On a note! Along with the best environmental indicators and the ability to heat less, four.Stroke engines are also more economical. They consume much less fuel. Savings reach up to 50% in gasoline and up to 80% of the clock.

Features of the gas station

Depending on the engine device, motorcycles are divided into two.Stroke and four.Stroke. In the first case, the piston in the internal combustion engine makes 2 moves in one working cycle, and in the second case. 4 moves. Differences in principle of operation of the engine determine different approaches to refueling a trimmer for grass.

Two.Stroke engine refueling

In ordinary household models, motorcycles are used, as a rule, a two.Stroke engine. The lawn mower is not needed very much power and edification, so it is quite suitable for performing the tasks. In addition, this engine is much cheaper and simpler, but it is refueling with a fuel mixture, which consists of oil and gasoline. Such fuel is poured into a carburetor and is supplied to the cylinder in the form of oil-Benzine fog. Thus, the oil provides lubrication of all the necessary parts, and in the process of operating the engine burns together with gasoline. However, the combustion of this mixture is accompanied by the release of caustic odor and smoke, which increases the toxicity of exhaust gases.

Important! For such motos, you need to use a special oil for two.Stroke engines, which completely burns without leaving a halt, and has low evaporation. And so that it mixes well with gasoline, it includes 20% solvent.

Motokos refueling with a four.Stroke engine

Four.Stroke engines are used in professional motorcycle models. They have high power and can work for a long time without a break and refueling. As fuel, they also use gasoline and oil, but they are poured into different tanks. So. The oil does not participate in the process of combustion, so the exhaust gases are not so toxic.

On a note! Along with the best environmental indicators and the ability to heat less, four.Stroke engines are also more economical. They consume much less fuel. Savings reach up to 50% in gasoline and up to 80% of the clock.

We deal with the choice of gasoline for the AI-92 or AI-95 lawn mower

How many people, so many opinions, which applies not only to the choice of oil for a trimmer for grass, but also gasoline. Similarly, in order not to make a mistake with the choice, it is recommended to use gasoline of the brand that the manufacturer recommends (indicated in the manual to the tool). However, not everything is so simple here, since at each gas station of the gasoline brand they are only called the same, but have a completely different composition. It is required to figure it out, and come to a single conclusion about which brand it is better to pour gasoline into a two.Stroke engine for your trimmer for grass.

Manufacturers recommend using A-92 gasoline for their technique, and some models require the use of the A-95 brand that do not contain ethyl alcohol. It is not recommended to use gasoline of the AI-90 brand and below, as they will entail the rapid wear of engine parts. Buying gasoline of one brand, one cannot be 100% sure that it is true. The result is the following picture:

  • The manufacturer recommends pouring fuel into a trimmer for the grass of the AI-92 brand
  • The summer resident uses only gasoline of this brand, but buys it at gas stations, where the price is lower or where you have to
  • This negatively affects the internal details of the motor, since at one gas station it is really high-quality AI-92 gasoline, and at the second, at best, if it is AI-80, not AI-76

As a result, the engine suffers, and after a couple of years of operation a new trimmer for the grass, it is necessary. In order not to analyze the quality of fuel or buy only expensive gasoline, it is recommended to refuel only at one gas station. At gas stations, gasoline is poured only into metal canists, not plastic.

There are manufacturers that produce special cleaned fuel for two.Stroke engines. If this option is selected, then you will not need to choose the best gas station, a brand of gasoline and control its storage periods.

Conclusion on the choice of gasoline for a trimmer for grass! In a trimmer for the grass, you need to pour gasoline of the brand that is recommended by the manufacturer. If you pour A-95 gasoline in a trimmer for grass, instead of A-92 (which is recommended by the manufacturer), then the engine will warm up faster and work unstable. It is also better to choose gasoline A-92 ECTO, which has improved characteristics in terms of environmental friendliness.

Motokos oil. How to choose in what proportions to breed

Many of you have a benzo tool in the household, for example, in a private house you can not do without a chainsaw. You understand, the harvesting of firewood for the winter is useful at a construction site and repair and in general, this is a very necessary tool. If a country house also has a decent area in size, then to combat grass just needs a trimmer for grass or a lawn mower, which also work on gasoline.

Of course, they can be bought and electric, but not everyone likes to pull a 30-meter extension cord to dig an area overgrown with grass knee-deep. Therefore, most people prefer to work as a gasoline tool. As you know, you need to add special oil for two.Stroke engines to gasoline. We’ll talk about it, because this is a very important aspect, if you do not add oil and add in the wrong proportions, then your engine will quickly “grunt” and your path will lie to the service center. To avoid all these troubles, add only high.Quality oil and in the correct proportions.

much, motorcycle, choose, refueling

The most popular for chainsaws, motorcycle and trimmers is the products of the famous company STIHL. It is sold in 2 packages. 1 liter and 100ml. For those who work hard, a liter bottle is suitable, and a small bottle is enough to “drink” at a time. A capacity of 1 liter costs 250, and 10 ml. 60. If you take a large one, then the savings are obvious.

Oil is added to gasoline in a proportion of 1 to 50, that is, for example, add 100 ml per 5 liters of gasoline. As you can see, a small bottle is great for 5 liters of gasoline mixture for refueling a chainsaw or trimmer for grass. On a large bottle on the side there are special marks by which you can determine how much oil was poured out of the bottle. If you bought a large 1 liter bottle, then buy a 20ml syringe in a pharmacy. Very convenient. 1 oil syringe per 1 liter of gasoline.

Experts advise using branded oil for their technology, it is ideal, since it is developed and tested precisely on Stihl tools. I note that Stiel has its own brands, such as Viking (popular models of gasoline trimmers). For them, also use Stilevsky oil and there will be no problems at all.

If you have made a gasoline mixture more than you can use it, then it is best to store the remains in a metal canister or in a glass container. In no case do not store the mixture in a plastic bottle. Of course, if you consume the remains after a couple of days, then you can pour the remnants of the mixture in a plastic one and a half, however, if the mixture is stored for a long time, then either a canister or a glassotter. The thing is that the gas mixture corrodes the plastic bottle, microscopic plastic precipitation appears in the mixture and this is very bad for the engine. Keep this in mind if you want your tool to work for a long time and without problems.

The second most popular brand of oil is a non.Bonding hokesworm. Of course, if you estimate it, after all, Stihl chainsaws use more people, at least all my friends and their friends use only them in their work.

However, there are those who do not have souls in the Husqvarna tool and I understand them, since I personally do not see much difference between Khuskvarnaya and Shtil, and one and the other tool is very high quality. But I saw satisfied owners of Husqvarna chainsaws. They say, saws are just super. I myself did not saw, however, I always listen to the opinion of people. So, if you have a gasqvarna gas tool, then it will be better for him to use special branded oil. Although nothing terrible will happen if you dilute the gasoline with a signs. But since the manufacturer recommends using only its products, we will do so.

On sale you can find liter containers. Black stylish bottle, the same marks on the side, and with a person (to know how much oil was cast from a bottle). As for me, absolutely identical quality. Such a bottle is 270, a bit more expensive.

Both that, and another oil, the cost is approximately the same, each is diluted in the proportion of 1 to 50. So feel free to buy anyone, of course, it is better to take the oil of the brand you have a tool. Then everything will be perfect, as the manufacturer advises. Good sawing, spinning grass and let your benzo.Tool work for a long time without breakdowns.

Mixing rules

To prepare the fuel mixture, it is necessary to use clean and dry containers, which does not contain extraneous inclusions or pollution. It is not recommended to use plastic containers. After adding liquids in the required proportion, the mixture must be thoroughly mixed for 2-3 minutes. You cannot do the following:

Choosing Motorcycle Oil & Lubricants by J&P Cycles

  • Add a small amount of oil directly to the gas tank of motorcycles, as this will not give a homogeneous mixture;
  • First of all, pour oil, and then gasoline. Due to the difference in densities, with this order of adding components, a heterogeneous mixture is also obtained
  • Anging the components “by eye”. With this approach, it is not possible to achieve an accurate proportion of gasoline and oil for a trimmer for grass 1/50 or 1/40;
  • Use polyethylene bottles, since the latter is dissolved by gasoline.

Benzotrimmer loves cleanliness. It is necessary to monitor the purity of the air filter and fuel. It is better to defend gasoline bought at a gas station for 2 days and pass through the simplest filter. A piece of bike matter.

We check the electrical equipment as follows:

We unscrew the candle, examine the gap between the electrodes. We set the right gap between the electrodes can be a “grandfather” way. We take a blade from a razor, scraps in half and insert a home.Made probe between the electrodes. If the blades enter tightly, then the gap is perfect.

We put on a candle cap of a high.Voltage wire and lean the candle against the metal surface of the engine. Twist several times by the starter. If the spark beats well at one point, then the gap is adjusted correctly. If not, the spark is weak or “wanders”, then it is necessary to re.Adjust the gap between the electrodes.

The finished mixture of gasoline with butter can be stored for no more than 3 months (clean gasoline is stored less). Dilute the fuel in the quantity that is enough for several applications of the trimmer for the grass. In general, prepare:

  • Gasoline and oil, which is suitable for two.Stroke engines with an air cooling system;
  • Metal canister and a mixture container;
  • Respirator;
  • Gloves.

Adding oil to gasoline

  • Pour 1 l of gasoline into a suitable volume of 1 l of gasoline and add 1/2 of the desired amount of oil.
  • Mix carefully, being at a decent distance from the sources of open fire.
  • Add the rest of the oil to combustible and mix everything again.

The process of refueling a trimmer for grass

General recommendations for refueling a trimmer for grass with a two-or four-stroke engine:

The result of calculating the fuel mixture:

To make it more convenient to measure the desired volume of oil in milliliters use a medical syringe of a larger volume, it costs inexpensively, sold in any pharmacy. Or use any measured container container.

Our calculator will help you count the desired proportion for refueling any benzo tool, for example: boat engine, chainsaws, trimmers for grass, lawn mower, etc.D. In other words, you can independently and freely calculate the correct ratio of gasoline and oil for two.Stroke engines. Mixing instructions in the photo below.

It is important, before starting the calculation, read the instrument operation instructions, in particular with points: refueling volumes, the ratio of the fuel mixture. These data will be initial for the correct calculation.

For your convenience, the resulting result can be printed on a printer by clicking the “Print” icon. We will be happy with constructive Комментарии и мнения владельцев and reviews regarding the work of our service.

Keep in mind that the gas.Instrument.Tool has a period of running and the gasoline/oil ratio differs from the recommended.

much, motorcycle, choose, refueling

Standard proportions

Often with the proportions of oil and fuel for reliable operation of motorcycles, problems arise. The reason for everything is absolutely different information in the sources. You may encounter the difference in data in terms of a dozen units, but it happens half. Therefore, you involuntarily think about how many oils per 1 liter of gasoline are needed: 20 ml or all 40. But for this there is a technical passport for the product that you purchase in the store. There should be a description of the device, instructions for its operation and instructions on the rules for preparing the fuel mixture.

First of all, it is necessary to take into account the information that the manufacturer recommends, since in the case of failure of the motorcycles, you can make your claims to him, and not a third.Party source. If there is no instructions in the passport, and even more so if the passport is missing, then we recommend looking for another trimmer model for grass at a more reliable seller.

For all other cases when you have a lawn mower model in your hands and there is no way to find out its technical features, there are standard proportions of the most likely components of the fuel mixture for a two.Stroke engine. Basically, these units use AI-92 gasoline and special synthetic oil, which contains a solvent for better mixing with fuel. Such oil evaporates slowly and has the ability to completely burn in the cylinder, without leaving a car.

How to Make Your Own Ethanol Fuel (At Home)

The standard attitude of synthetic oil to gasoline is 1: 50. This means that 100 ml of oil needs 5 liters of gasoline, and in accordance with this, oil consumption per 1 liter of gasoline is 20 ml. Knowing the amount of oil required to dilute 1 liter of fuel, you can easily calculate any norms when preparing fuel for a trimmer for grass. When using mineral oils, the ratio of 1: 40 is most often standard. Therefore, 1 liter of fuel will require 25 ml of such oil, and 125 ml per 5-liter canister.

When the lawn mower is working, it will not be difficult to determine and adjust the actual amount of oil, the right of a particular model, who has a little experience in the operation of such a technique. You should only pay attention to exhaust gases (their color, toxicity of the smell), stability of the cycles, engine heating and developed power. About what consequences from the incorrect proportions of mixing gasoline and oil can be expected is lit in another section of the article. There are motorcycles operating on gasoline AI-95 brand gasoline. It should also be taken into account.

If the manufacturer recommends fuel with such an octane number, then you need to follow the requirements so as not to reduce the working resource of technology.

The correct selection of oil for benzos

Two.Stroke engines are filled with a mixture of unhealthy gasoline and oil with 2t markings. In this case, you need to use the recommended gasoline AI-92. If you apply a brand with a higher octane number, the temperature of the flash and combustion will be higher, the valves will burn out prematurely. The same applies to the clock. The recommended composition is not the most expensive. But the use of another brand is unacceptable. Valid will change, this will lead to insufficient lubrication of ordinary products made without grinding high accuracy.

If the oil is added with excess, incomplete combustion will lead to the formation of a soil and an excessive exhaust into the atmosphere. A rich mixture is harmful to the engine. For a four.Stroke engine, the oil is poured separately from gasoline. It washes nodes, cools, reduces friction. In the process, the oil is polluted and after 50 working hours should be replaced. What kind of oil is poured into a lawn mower, indicated in the passport. The composition should have a 4t mark with a viscosity of 10w40.

The best oil for any engine is the recommended. However, Shel Helix Ultra oil is world famous. The company has been developing a new technology for obtaining synthetic oil from natural gas for 40 years. Pureplus technology made it possible to obtain an improved composition of basic oil. On its basis, with the addition of the necessary additives, leading manufacturers receive recommended oils for their equipment.

The choice of oil primarily depends on the recommendation of the manufacturer. So, only branded oil is used for STIHL. The same oil is suitable for the brand of a knight, as the engines in the brand brands. There is an opinion of experts, oil of any manufacturer, designed for one type of equipment, is suitable for use on all brands. But if possible, it is better to use the recommended.

The supply of oil must be had for the need for one season. The product that has been standing for a long time loses its properties. On sale there are packages from 0.1 to 5 liters.

The path of oil recommended for the Husqvarna lawn mower was investigated. The company has no its own production, only the spill. The product purchased wholesale is spilled into small containers, marked and enters the retail network. Perhaps the composition of the oil at the manufacturing stage added exclusive additives for Khuskvarna.

The use of oil, according to the instructions for motorcycles, is mandatory. On clean gasoline, the equipment cannot work.

| Denial of responsibility | Contacts |RSS