How to choose a tire for a chainsaw.

All you need to know about the step of the chain of the chainship for effective work

There are several main parameters according to which they choose a chainsaw, one of them, a step of a saw set. The step is located depending on the power of the chainsaw, and to a large extent affects the speed of the cut.

Then how much the step corresponds to the power, determines the performance and life of the chainsaw. Also, the fuel materials consumption depends on its correct selection.

Tell me the secret of the Caluna⁠ ⁠

I always pricked firewood by the Soviet old ax and then I decided that we had to keep up with the times and buy a modern clay. Fiscars costs inadequate money, found Banco 0 in the store of the Swedish manufacturer.7. 450. I have a hacksaw of this company, it is awesome, so I decided to take. I arrived at the cottage, I have chopped birch firewood, but they are large and I always stake them on smaller parts. I decided to try out a new toy and fucked up. The chatter bounces, switchs off and cannot be split (((tell me who understands the joke? Maybe the functions of this ax are generally different? Or it must be sharpened, although it is logical that it is sold already sharpened.

The length of the chain

It is determined by the number of shanks that are installed in the groove of the saw tire and due to which the chain is set in motion. It is not difficult to count them on an existing saw chain, you can already purchase a chain ready. “in the ring”. Ready chain “in the ring”

The last two numbers in the Husqvarna product code indicate the number of shanks. For example, code 5854042-52 on the packaging of the saw chain Husqvarna X-Cut S93G. Here “52”. The number of shanks. The chain can also be selected according to the length necessary for the user by ropping it from the finished bay at the point of sales of the official dealer.

Which is better

We figured out the parameters, now let’s see which chain for the chainsaw is better and why. This question is relevant, t.To. Everyone wants to use only the best, but by what criteria to determine which chain is better and which is worse. Better, it means faster, or better. Safer?

All types have both advantages and disadvantages. For example, a cheesel with a 1.5 mm landing size and a step of 0.404 inch, the most dangerous. She has a high returns, it is difficult to control, but at the same time, it differs from the others with the best indicators of the cut rate and performance.

We think that it is better to solve which chain for a chainsaw, and which is worse, the consumer should, based on his experience. We can only talk about facts.

Tire for the chainsaw: select and install the correct option

Initially, it should be noted that the tire on the chainsaw is an element, the contour of which is continuous rotation of the chain. Devices are made of high.Quality types of steel, which allows you to extend the service life of the product.

On the one hand, such products have holes for a threaded mount, and on the other, a driven star is installed. This design of the product for chainsaws allows for the maximum smoothness of the chain, and also significantly reduces the load on the engine. There is a groove around the perimeter of the device in which the tail of the circuit is moved. The presence of special holes allows for the removal of high temperature, as well as lubricate the chain to increase the efficiency of the tool functioning.

Choosing a tire for a chainsaw, it is important to pay attention to such parameters as the length of the product, as well as the manufacturer. Not only the quality of the product depends on the manufacturer, but also its cost. It is very important that the length of the tire is selected that is indicated in the technical passport of the saw, but nothing more. After all, the use of devices of greater length will require not only the use of the corresponding circuits, but also affect the performance of the tool. Especially often, the owners of household files resort to such alterations, acquiring large tires for them, which allows the sawing of large.Diameter trees. In this case, the resource of the tool and performance is significantly reduced, which leads to the need to carry out repairs.

Classification

When choosing a tire, it is important to consider their types that are classified for the following options:

How To Choose The Right Tire Size | Tire Sizing Guide

  • Narrow flat. They are intended for use in the chainsaws of the domestic class, as they are able to work in pairs only with low.Profile options for chains. The advantage of such devices is minimizing injury hazard due to the lack of a “reverse blow”. This is very important for beginners who are not yet familiar with the saw process and such an effect.
  • Lightweight. Consists of two steel plates, which are interconnected using a special material. This allows you to significantly reduce the weight of the material, which is sometimes very important when performing complex work.
  • Product with a replaced head. Such units are intended for use on professional classes of chainsaws.

It is very important to take into account the type of devices when choosing them. However, this is not the only important point that you should pay attention to.

What kind of tyres should I choose for my car? How do I choose tyres myself? | Tips from AUTODOC

choose, tire, chainsaw

Selecting the length of the device, taking into account the drive power

The length of the chainsaw tire depends on the power of the tool itself, as well as the size of the torque. To choose the right product for your tool, you should measure the previous option. There are the following options for the lengths:

  • 25 cm or 10 inches;
  • 30 cm or 12 inches;
  • 35 cm or 14 inches;
  • 40 cm or 16 inches;
  • 45 cm or 18 inches;
  • 50 cm or 20 inches.

The length of the device is measured in inches, in fact, like chains. Tire marking is carried out in a 2.Inch step, which can be seen in the transfers above. Long devices are used mainly on instruments of professional and semi.Professional use of great power. The long tire of the chainsaw allows you to cut thick logs. The chains and tires must correspond to the power of the tool, otherwise, this will lead to the rapid wear of the motor.

Small in length of the device are used on low.Power units, which allows you to quickly and efficiently use the tool when sawing small boards and logs. The guide to the instrument indicates the best version of the product of the product. It is forbidden to use tires of larger length, but you can install smaller tires if it is advisable.

It is important to know! The length of the device in inches is indicated on the side of the products.

Often among beginners, the question arises of how to measure the length of the tire of the chainsaw? The length is measured using a roulette or ruler by applying it from the beginning of the product (at the location of the driven star) to the working part (to what is hidden under the lid).

Choice recommendations

When choosing a new device, special attention should be paid to the material of manufacture. It is almost impossible to evaluate its quality visually, so make sure that the product has a marking and manufacturer’s name. When choosing, you should pay attention to the TLge important, but secondary parameters:

    Shank. Most manufacturers produce components that can only be installed under their models of chainsaws. If you buy a device from the manufacturer Husquarna, but plan to install it on the Stihl chainsaw, then initially make sure that it will approach it.

If the tire and the chain are correctly selected for the chainsaws, this will achieve maximum tool performance, which is very important when performing work on sawing wood of various diameters and rocks. Do not forget to also carry out the tire revolution in the opposite direction at each sharpening of the chain, which will ensure uniform wear of the part.

Household, semi.Professional and professional manual chainsaw equipment, regardless of the cost and operational characteristics, has an identical design. Cutting headset, which includes a tire for a chainsaw, and the saw chain belongs to the category of shift equipment.

The decision, which tire to put on the chainsaw is made by the owner, taking into account many factors. First of all, this is the compatibility of the seat and channels for the supply of lubrication to the working area, engine power, the specifics of the upcoming operation.

Specific assistance in independent choice of tires can be given the recommendations of experienced specialists or information on the instructions for use.

In particular, a long saw setting is preferable for rolling and sawing trees of large diameter, short. For the bronation of trees and preparing for the installation of construction wood.

Tire for the chainsaw: select and install the correct option

Initially, it should be noted that the tire on the chainsaw is an element, the contour of which is continuous rotation of the chain. Devices are made of high.Quality types of steel, which allows you to extend the service life of the product.

choose, tire, chainsaw

On the one hand, such products have holes for a threaded mount, and on the other, a driven star is installed. This design of the product for chainsaws allows for the maximum smoothness of the chain, and also significantly reduces the load on the engine. There is a groove around the perimeter of the device in which the tail of the circuit is moved. The presence of special holes allows for the removal of high temperature, as well as lubricate the chain to increase the efficiency of the tool functioning.

Choosing a tire for a chainsaw, it is important to pay attention to such parameters as the length of the product, as well as the manufacturer. Not only the quality of the product depends on the manufacturer, but also its cost. It is very important that the length of the tire is selected that is indicated in the technical passport of the saw, but nothing more. After all, the use of devices of greater length will require not only the use of the corresponding circuits, but also affect the performance of the tool. Especially often, the owners of household files resort to such alterations, acquiring large tires for them, which allows the sawing of large.Diameter trees. In this case, the resource of the tool and performance is significantly reduced, which leads to the need to carry out repairs.

Tire length. We pay attention!

That which is not least throws into the eyes when choosing a chainsaw is the size of the tires: it depends on them how large the log of the log can be cut.

The length of the chainsaw tire is one of the most important parameters affecting convenience, speed and safety of work. This characteristic should be agreed with the operating power of the chainsaw engine, which is why any serious manufacturer in the technical passport of its products is indicated by the recommended parameter of the length of the tire.

What is fraught with ill.Conceived use of too long or too short tires? You should start with the fact that the size of the tire recommended by the manufacturer cannot be categorically. Smaller size is allowed within reasonable limits, but it is also not recommended: there is an opinion that a short chain provides a lower load on the tool, but it should be remembered that this causes serious harm to the saw headset. The permissible deviation range must be indicated by the manufacturer in the technical documentation attached to the saw.

Long tires of chainsaws give more convenience when working with a significant material, for example, to perform deep cut in a thick log. However, the use of a long tire paired with a low.Power unit will give one disappointment: the engine power will not be enough to rotate the crankshaft, which means that fast sawing will be simply impossible. The saw process will be slow, gasoline consumption will be increased, the motor will instantly worn out.

The smaller tire length with a properly selected tool of the tool will provide high sawing speed and will be optimal for use in work with small trees or boards.

The length of the saw tire, as a rule, is indicated in inches both foreign and domestic manufacturers. Tires are marked in a 2.Inch step. Below is the equivalent in the familiar to the Russian metric system of lengths:

Tire length selection, taking into account the drive power

The length of the new guide tire is determined by the power and value of the coefficient of torque of the power unit.

  • Models of a small and medium power range are equipped with tires from 30 to 40 cm long.
  • Saw sets create excessive loads on the engine and cinematics of the tool, which negatively affect its traction characteristics and durability of operation.
  • The attached guidelines for use indicates the recommended length of the guide tire. This means that the installation of a shorter headset is not excluded, but there are a number of restrictions on the operation of the tool with the tire of increased length.

A professional level of a professional level is equipped with power units, the power of which allows the use of tires up to 75 cm long. Often the size of the tire in centimeters and inches is applied to its side plane.

Why is heated

In some cases, when working, it can be noted that the tire is overly warming, the reasons for this phenomenon are two. First, this is a factory marriage. In such details, not high.Quality bearings are installed, which heat it during operation. The defective detail will bask and nothing can be done with this, only replacement but new.

The second reason, this is again not enough lubrication, or its complete absence. When such signs of overheating appear, such as melting the paint on the tip of the tire and its strong smoke, it is worth stopping the operation of the tool and contacting the service center.

This is what a overheated chain looks like

The choice of tire for the chainsaws largely depends on the characteristics of the chainsaw itself. It is worth choosing only components recommended by the manufacturer, taking into account the step of the leading star, the width of the groove for the circuit and the shape, and the size of the shank. The key to the long.Term service of the sawing headset of the chainsaw is an uninterrupted supply of a sufficient amount of lubrication of the corresponding brand. Excessive wear of the tire and chain, as well as their heating, is a sign of improper operation of the lubrication system of the saw chain. We lit up the main points of choice, remember them and consider when buying, and then you will definitely buy what you really need.

| Denial of responsibility | Contacts |RSS