How to cook gasoline for a trimmer for grass. Advantages of Huter GGT-1500TX

How to dilute gasoline with oil for a trimmer for refueling

Some types of motor oil are designed for four.Stroke power units, while others are designed for two.Stroke. They are not interchangeable, and they should be poured in accordance with the purpose, because various requirements are imposed on the lubricants for engines with different working cycle. So, oil for four.Stroke engines, where a forced lubrication system is used, is designed for prolonged exposure and is designed to provide a more stable coating of parts. In 2-clock engines-the oil comes with the fuel and should instantly dissolve in it, freely burning with a minimum of sediments in the form of soot and ash. Therefore, a characteristic feature of 2 strokes is their good cleaning and minimal aggressive additives. They, unlike 4-stroke fluid, do not contain ash, anti-zadir and anti-ine additives, which allows them to burn almost completely with fuel without the formation of soil and toxicity of the exhaust.

A feature of oils for four-stroke engines is many metal-organic additives that are aimed at improving their physical and mechanical properties and increasing the efficiency of action. And if you pour such a mixture into the engine with a working cycle for two tacts, this will lead to the formation of ash deposits on the surface of the piston and the walls of the combustion chamber. The increased accumulation of deposits, in turn, can provoke the appearance of various troubles, which can be eliminated only by making a complex and expensive repair of the motor block motor. A lot of harm is caused by soot, which clogs the air filter and settles in the grooves of the piston rings, if you use the inappropriate oil product. The accumulation of soot is fraught with the loss of the mobility of the rings, and this is a direct path to reducing the power of the engine of the walk.Behind tractor, the deterioration of its operation, and even the complete failure.

Preparation of the correct fuel mixture

Before starting to run the new engine of the lawn mower, you must also prepare the fuel mixture correctly. As you know for two.Stroke engines, it is prepared from special two.Stroke oil and gasoline, taken in certain ratios. You can find out proportions from the instructions attached to the tool, or on the labeling label. From the instructions you will also learn the recommended type of fuel, as well as the recommended type of motor oil.

cook, gasoline, trimmer, grass

Cook fuel in small quantities sufficient for one mowing grass. Use special canists made of plastic for fuel, or a separate glass or metal dishes. It is best to type oil with a medical syringe.

Having gathered to run into a new lawn mower, many are faced with the problem in the preparation of the fuel mixture. And the reason for this is the disagreement in the instructions of the tool manufacturer and in the instructions of the manufacturer of motor oils. The first recommend a 1:25 proportion. The latter recommend 1:50. Who to believe? How to proceed?

According to experts, if in the instructions for a motorcycle, manufacturers write a proportion of 1:25 or 1:30, then it is most likely a cheap tool with poor cooling, or the manufacturer does not know what kind of oil will be added to the consumer. But here it must be understood that the excess of lubricant does not affect the performance of a trimmer for grass in the best way. Excess oil does not completely burn out when operating the engine. It cokes, clogs a cylinder and piston.

What to do in this situation when running in a new tool? An ideal option would be to purchase exactly the oil that the manufacturer of the lawn mower recommends. In the case of run.In engines, when it is not possible to purchase the recommended oil, it is best to purchase a good Husqvarna two.Stroke oil for the same gas tool. It costs not cheap, but there is enough it for a long time. It is necessary to interfere with it as it is written in the instructions on the bank.

See also  How to check the spark plug on the trimmer

Remember, it is best to use the proportion that the oil manufacturer gives. But is that proportion that is written on a spit is better to find out by experiment. If, with a trimmer recommended by the manufacturer for grass, the proportion of the engine sniffs with oil and the subteids are visible on it, then the proportion must be increased.

Oil selection rules

Motor oil depending on the chemical composition:

  • Mineral. Made of oil distillates and is intended for low.Power air.Cooled equipment;
  • Semi.Synthetic. Is a mixture of mineral and synthetic oils and is suitable for 2T and 4T, as well as for air and liquid cooling;
  • Synthetic. Produced on the basis of complex ethers and can be used in powerful equipment, as well as for work in difficult climatic conditions.

Important! Oils for two.Stroke and four.Stroke engines differ among themselves the ability to dissolve, burn and evaporate. At the same time, so that liquid lubricant differs from gasoline, it is painted in different colors: blue, green, red.

Depending on the classification of the API, the following groups of oils for trimmer engines can be distinguished:

  • That. For low.Power equipment with an engine volume up to 50 cm³ and air cooling;
  • TV-for powerful equipment with a motor volume of 50-200 cm³ and an air cooling system;
  • TS. For a powerful two.Stroke equipment (motorcycles, chainsaws, lawn mowers, etc.) with a engine volume 50-200 cm³;
  • TD. For motors of boats with liquid cooling.

To choose the optimal oil for a specific trimmer model for grass, it is better to take into account the recommendations specified in the instructions. For motos 2t, API-TV class oil and API-TS is usually used.

On a note! In addition, there is a JASO classification for two.Stroke engines, and SAE30 is also used for four.Strokes.

Leading manufacturers of garden equipment themselves develop and produce oils for their equipment. Such lubricants most fully satisfy all the technical and operational characteristics of specific series of trimmers. For example, for STIHL (STIHL) FS 5 motorcycles, it is best to use the STIHL HP or Stihl HP Super oil, for Husqvarna 143R, Husqvarna HP or Husqvarna LS oil is suitable. But the usual M-8V mineral oil is also suitable for the Patriot brand.

How to dilute gasoline with oil for a trimmer for grass

Dilute gasoline for a trimmer for grass in the correct proportion. Insufficient oil can lead to poor lubrication of the elements of the lawn mower, which contributes to rapid wear. In case the oil is more than the olive formed on the pistons and spark plugs. Foreths on the moving parts of the engine interferes with normal operation and leads to the speedy breakdown of the motor.

What proportion is required for a specific model of a trimmer for grass can be found from the attached instructions. Most often, for 2-stroke gasoline motors of motorcycles, the fuel mixture is used in a ratio of 50: 1, where 50 is part of the gasoline, 1-part of the oil. That is, 20 ml of oil should be added to 1 liter of gasoline. The table will help to choose the necessary ratio.

To correctly measure the proportions, use measured containers with a milliliter scale. For these purposes, a special canister with a double neck is perfect, it is designed to mix and storage of oilbenzin. For example, oil can be typed with a medical syringe without a needle. Before mixing liquids, make sure that there is no water, dust and particles of dirt in the container for the finished fuel mixture.

Diluting gasoline with lubricating fluid directly in the fuel tank is unacceptable, in addition, the proportion of oil and gasoline should be clearly observed. If you ignore this rule, then the operation of a trimmer engine for grass can be unstable, which is why it will quickly fail.

It is not recommended to use plastic bottles or canists for this purpose. This is due to the fact that gasoline has the ability to dissolve plastic, which means that part of the plastic can get into the fuel tank, which can lead to a carburetor breakdown. Although there are special plastic canists with the marking “Flame”.

  • Petrol;
  • Oil suitable for two.Stroke engines with an air cooling system;
  • Canister, better metal;
  • Mixing container is also better metal;
  • Gloves;
  • Respirator.
See also  What is the best reel for grass trimmer?

In addition to protective equipment, do not forget about fire safety rules, because gasoline and engine oil are easily ignited:

  • It is better to work on the street to avoid accumulation of gasoline vapor in the room;
  • You can not smoke and create situations related to the emergence of a spark.

Make a mixture of gasoline and oil as follows:

  • Pour 1 liter of gasoline into the container, add half the desired portion of the oil. Mix thoroughly, do it extremely carefully away from the sources of open fire.
  • Add the rest of the oil to gas for the grass and mix thoroughly again. Now fuel can be poured into the fuel tank of a trimmer for grass.

The mixture can be stored for no more than three months, so it is better to dilute gasoline in such quantities that there is enough use.

For dilution, only high.Quality oil can be used, while it is recommended to purchase it only in trusted stores, for example in specialized hypermarkets.

How to dilute gasoline with oil for a trimmer for grass. Step.By.Step instructions

Fuel mixing occurs taking into account special proportions.

If you dilute the fuel mixture with an insufficient amount of lubricant, this will lead to the rapid wear of the parts of the lawn mower

The optimal ratio of oil and gasoline can be viewed in the instructions for the trimmer. As a rule, it is equal to 1:50, 1:40 or 1:25.

It will be forbidden to dilute gasoline with a lubricant component in a suitable container: to do this immediately in the fuel tank is prohibited. If you ignore this rule, the work of the motor can be unstable, as a result of which the tool will quickly fail. To dilute the fuel mixture, do not use plastic canists or bottles, since gasoline is able to dissolve this synthetic material. Fuel mixing order:

  • Pour a liter of gasoline into the container (optimally. Metal canister).
  • Add half the necessary oil proportion.
  • Mix the liquid thoroughly, away from sources of open fire.
  • Pour the rest of the lubricant into the container and mix the mixture again.
  • Pour fuel into the fuel tank of a trimmer for grass.

Work should be carried out by wearing a respirator and rubber gloves. For the convenience of transfusion, you can use the watering can. The finished mixture should not be stored for more than 3 months, it is better to dilute exactly as many fuel as you need for the work planned in the near future. Mnight mixing oil with gasoline, be sure to choose high.Quality, buy it better at proven gas stations.

Proportions of oils and fuel

Calculation of the ratio of ingredients for preparing a gas station for grass should take place taking into account the recommendations on the packaging from oil. The standard proportion is 1:50. Any quality oil for two.Stroke engines is allowed to use.

Oil selection rules

Motor oil depending on the chemical composition:

  • Mineral. Made of oil distillates and is intended for low.Power air.Cooled equipment;
  • Semi.Synthetic. Is a mixture of mineral and synthetic oils and is suitable for 2T and 4T, as well as for air and liquid cooling;
  • Synthetic. Produced on the basis of complex ethers and can be used in powerful equipment, as well as for work in difficult climatic conditions.

Important! Oils for two.Stroke and four.Stroke engines differ among themselves the ability to dissolve, burn and evaporate. At the same time, so that liquid lubricant differs from gasoline, it is painted in different colors: blue, green, red.

Depending on the classification of the API, the following groups of oils for trimmer engines can be distinguished:

  • That. For low.Power equipment with an engine volume up to 50 cm³ and air cooling;
  • TV-for powerful equipment with a motor volume of 50-200 cm³ and an air cooling system;
  • TS. For a powerful two.Stroke equipment (motorcycles, chainsaws, lawn mowers, etc.) with a engine volume 50-200 cm³;
  • TD. For motors of boats with liquid cooling.

To choose the optimal oil for a specific trimmer model for grass, it is better to take into account the recommendations specified in the instructions. For motos 2t, API-TV class oil and API-TS is usually used.

See also  How to mow an electric trimmer. The duration of the mowing

On a note! In addition, there is a JASO classification for two.Stroke engines, and SAE30 is also used for four.Strokes.

Leading manufacturers of garden equipment themselves develop and produce oils for their equipment. Such lubricants most fully satisfy all the technical and operational characteristics of specific series of trimmers. For example, for STIHL (STIHL) FS 5 motorcycles, it is best to use the STIHL HP or Stihl HP Super oil, for Husqvarna 143R, Husqvarna HP or Husqvarna LS oil is suitable. But the usual M-8V mineral oil is also suitable for the Patriot brand.

Oil selection rules

Motor oil depending on the chemical composition:

  • Mineral. Made of oil distillates and is intended for low.Power air.Cooled equipment;
  • Semi.Synthetic. Is a mixture of mineral and synthetic oils and is suitable for 2T and 4T, as well as for air and liquid cooling;
  • Synthetic. Produced on the basis of complex ethers and can be used in powerful equipment, as well as for work in difficult climatic conditions.

Important! Oils for two.Stroke and four.Stroke engines differ among themselves the ability to dissolve, burn and evaporate. At the same time, so that liquid lubricant differs from gasoline, it is painted in different colors: blue, green, red.

Husqvarna trimmer fuel line and carb rebuild

Depending on the classification of the API, the following groups of oils for trimmer engines can be distinguished:

  • That. For low.Power equipment with an engine volume up to 50 cm³ and air cooling;
  • TV-for powerful equipment with a motor volume of 50-200 cm³ and an air cooling system;
  • TS. For a powerful two.Stroke equipment (motorcycles, chainsaws, lawn mowers, etc.) with a engine volume 50-200 cm³;
  • TD. For motors of boats with liquid cooling.

To choose the optimal oil for a specific trimmer model for grass, it is better to take into account the recommendations specified in the instructions. For motos 2t, API-TV class oil and API-TS is usually used.

On a note! In addition, there is a JASO classification for two.Stroke engines, and SAE30 is also used for four.Strokes.

Leading manufacturers of garden equipment themselves develop and produce oils for their equipment. Such lubricants most fully satisfy all the technical and operational characteristics of specific series of trimmers. For example, for STIHL (STIHL) FS 5 motorcycles, it is best to use the STIHL HP or Stihl HP Super oil, for Husqvarna 143R, Husqvarna HP or Husqvarna LS oil is suitable. But the usual M-8V mineral oil is also suitable for the Patriot brand.

cook, gasoline, trimmer, grass

Standard proportions

The standard determines that for the preparation of a gasoline mixture, you will need to take technical fluids in a proportion of 1 to 50. This means that to 10 liters of gasoline it is necessary to add 200 milliliters of oil. If you need to dilute the amount by 1 liter of gasoline, then use the formula according to the rule of the proportion.

Garden. Petrol Products Support Video

Please note that when using mineral oil, the proportion is less and is in the standard version per liter of gasoline 1 to 40.

An important feature

Prepared a combustible mixture for a trimmer for grass, falls into the combustion chamber of the cylinder in the form of a whitish fog. Oil liquid integrated into gasoline lubricates the crankshaft, cylinder walls. Infoliasis of oil fluid in the fuel is fraught with premature wear of the parts and nodes of a trimmer for grass. Exceeding the norm leads to a breeder that settles on working details, which is also fraught with premature technical wear of motorcycles.

The gasoline mower will serve the owner for a long time, provided that in the fuel tank, they will not be any kind of gasoline, but high.Quality prepared fuel.

| Denial of responsibility | Contacts |RSS