How to cut a gas stroke block along Rivne. Drill, drill, crowns

How to cut aerated concrete. 4 types of cutting devices

When cutting aerated concrete blocks, various equipment are used:

However, it is better to cut aerated concrete slabs with a special tool, then the wiped edges will turn out to be smooth and even. Used in the form of special cutting tools:

Hand saw

  • A metal corner, with which the correct angle of cut is controlled.
  • Ruler, marker or pencil, which are needed to determine the place of sawing.
  • Rubanok for gas concrete products, which equals the surface layer of masonry.

Strobores

SPEAL STROBROSE. Strobores designed to tease grooves in the block and grooves of grooves. You need to work on a construction site to work with a gateway. They are electric and manual. The advantages of the tool include:

Shtroboresis consists of a double.sided cutter, which is fixed to the handle. To accelerate the work, a tool with two holders is used. Before the saw, indicated with a pencil and ruler, the place of future holes.

Types of equipment

When cutting aerated concrete blocks, various equipment are used:

However, it is better to cut aerated concrete slabs with a special tool, then the wiped edges will turn out to be smooth and even. Used in the form of special cutting tools:

Hand saw

  • A metal corner, with which the correct angle of cut is controlled.
  • Ruler, marker or pencil, which are needed to determine the place of sawing.
  • Rubanok for gas concrete products, which equals the surface layer of masonry.

Strobores

SPEAL STROBROSE. Strobores designed to tease grooves in the block and grooves of grooves. You need to work on a construction site to work with a gateway. They are electric and manual. The advantages of the tool include:

Shtroboresis consists of a double.sided cutter, which is fixed to the handle. To accelerate the work, a tool with two holders is used. Before the saw, indicated with a pencil and ruler, the place of future holes.

Tools for cutting aerated concrete in length and width

It is easy to work with aerated concrete. You can cut a gas block with manual or electric saws, which allows them to make various structural elements of buildings and buildings of any geometry.

Tricks of the Masters and Secret DEVICES !! 35 best ideas for 2020!

Band-saw

A ribbon type for cutting gas blocks. professional high.performance equipment. Allows you to saw aerated concrete blocks to narrow parts. They are not used for the construction of individual houses, and in the construction of large retail or industrial facilities they are often used.

The machine is divided into the upper and lower part, between which the working area is located, where the blocks are sawn.

The working blocks provide wheels on the shafts, driven by the electric motor. Between them, the working sheet is pulled almost in the same way as a chain.

One part of the canvas is placed in the machine, so it is not visible, and the second passes through the working area. an iron plate with markings.

There are two buttons on the machine to turn it on and off.

An effective dust removal system is provided, which allows you to create the necessary conditions for long and continuous operation.

  • It has maximum performance. The material is cut very quickly.
  • Has an extremely simple design, so it can be served by yourself.
  • Allows you to put the electric motors of the desired power.
  • Can easily cut thick blocks.
  • The movement of the working unit allows you to make even round cutouts.
  • Thanks to the guide system, the exact cuts of the cut are obtained.
  • Does not allow you to cut holes.
  • For work, you need a professional who knows safety precautions, as the cutting tape can cause fatal injury.

Due to large dimensions, a capacious truck is needed to transport the strip machine.

How to saw with a hacksaw

Due to the low density, you can cut an aerated concrete block with hand saws with a special cutting edge. It is advisable to use this tool if the volume of work is small and the configuration of the elements of the elements is simple.

It is profitable to use this saw because of its low price. You can work at a height, where it is extremely difficult and often impossible to rise with other equipment. This allows the master to quickly perform the necessary operations, since the hacksaw is light and always at hand.

Of the disadvantages, it is worth highlighting the low accuracy of the cut. This problem is solved with a cut on the guide frame, which is installed on the block. With its help, the cut will be more even.

Mostly a hand hacksaw is sawn aerated concrete at home.

When choosing it, the following aspects must be taken into account:

Saber saw

Effective for cutting a gas block, so it can significantly save time and time. The tool is inexpensive, so even for the construction of your own home, the purchase will be justified.

Sabel saw cuts the material due to the quick rotational-settings of the shift blade. The length of the cutting blade can be different, but for comfortable work, experts recommend using canvases longer than the thickness of the block.

  • Accurate cut.
  • Great performance.
  • Allows you to make closed cuts.
  • You can make grooves for electric wiring and reinforcement.

The chain saw is electric

This tool allows you to saw a gas.sulcate block and cut into it deaf holes or slots of different shapes. It is considered universal because it is able to cut various building materials.

The advantage of the saw is that it saws the material due to the rotation of the cutting edge in one direction. This allows you to effectively remove sawdust from the working area, while the rod does not hit the material in the process of deaf cut, which reduces the risk of jamming of the saw.

Using a power tool, you can cut U-shaped grooves.

  • Blocks can be cut directly in the masonry.
  • You can work in many positions (saw at an angle, at a height, etc.D.).
  • For an even saw, it is equipped with guide tires.
  • Aerated concrete circuit going on wood, but is quickly stupid, so you have to buy a chain with a winning spraying at a price of about 2,000
  • The saw itself costs from 10,000
  • As a result of prolonged work, it heats up greatly, which leads to stretching the circuit. If you do not remove one link from the chain in a timely manner, it may jump off. Because of this, you need to periodically give it to cool.
  • Pilage stars quickly wear out. They are not expensive, but a lot of time is spent on replacing them.
  • It turns out a very thick cut, so it is required to lay more the solution between the blocks.

Electric chain saw. a traumatic tool, since the cutting mechanism is open. Many workers are injured annually as a result of working with him.

Additional devices for cutting aerated concrete

In order for the cutting of aerated concrete to be accurate, it is better to do it yourself. a wooden rectangular structure in the form of two letters P, fixed on the platform with corners. The block should be placed inside these letters. There should be a normal gap between them to perform the cut. The gap should allow the saw to move freely, but at the same time it should not go to the sides. In the plane of the platform, it should be larger than from the sides. This will allow waste to be pouring there during work.

Safety measures when sawing aerated concrete obliges to use certain technologies taking into account the tool used, as well as overalls (costume, boots or boots, gloves or mittens) and personal protective equipment (respirators, masks or glasses).

What to take into account when choosing?

As for the manual tool, the optimal option for processing aerated concrete will be a model with teeth equipped with winning attacks. Its high cost may well be justified by the high strength of the tool. This will not affect the time of the cut (it will be quite long), but the safety of the material and the accuracy of cutting will be higher. It is better to cut large.sized blocks using a two.handed tool, but its weight is much larger. you need a partner.

It is preferable to use the products of a well.known company, and not to purchase a handmade tool with a dubious quality of manufacture. The manufacturer of the Utong tool produced perfectly. A good economy version is the products of the trademark “Delta”. With a hand hacksaw, neat sections are performed, window or doorways are formed. Lack of such a tool. you have to cut at a low speed.

When buying electric saws, it is necessary to pay special attention to its characteristics. The power of domestic models is relatively low, overheating can happen less than half an hour and you will have to periodically disconnect them. They cost about two to three thousand, while the cost of a professional saw can surpass this amount 10 times.

But the instrument of this class is designed for a daily work schedule providing for continuous work. In this mode, the saw can work for more than 5 hours in a row. They are with power from 500 to 1500 watts.

By type of drives, the tool is divided into:

  • cord, more powerful and productive, but not so mobile (you will have to use an extension cord);
  • battery (electric hacksaw has less weight, it is processed by aerated concrete at construction sites).

In addition, it can be noted that there are functions such as speed adjustment, replacement of the canvas without the use of keys. It is good if the saber saw has anti.vibration protection.

When acquiring consumables for electroplays, it is necessary to pay attention to the type of cutting tooth. The size of the teeth and the interval between them indicate where they should be applied. For example, equipment with a large cutter is used for high.speed cutting, with a small one. with figured cuts. The smallest interval of teeth gives perfect cuts of cut, and with a large wiring, cutting time is reduced, but this is inevitably accompanied by a loss of quality.

How to cut it correctly?

Hacksaw

In the case when projects of erected houses or other buildings do not suggest that they will have complex geometric forms, the acquisition of an expensive power tool is pointless. The usual hacksaw is quite enough. It is used to process a small volume material. The quality and speed of the saw is influenced by the technical, strength, dense factors of the material, as well as the level of temperature and humidity.

Attention! Drinking dry blocks is better in warm conditions. If the gas block absorbs moisture from the surrounding air or gets wet for other reasons, the canvas of the hacksaw can be stuck when sawing.

Consider the direct process of the cut.

  • To obtain a flat line, you will need a pencil and a square. On aerated concrete, marking is applied for each of the four faces. Then cuts are produced to a depth of 1-4 cm along two long faces and one short. A hand tool should have a canvas of sufficient length, get to the end of the cut and clean the passage from sawdust.
  • The canvas is directed without excessive pressure so that there is no departure from the marking line. The optimal cut angle is 45 °. It is necessary to ensure that the sawn part does not fall, the cut code will be completed. Also, in order to avoid chips, a reliable stand is needed, a corner.

With pre.made cuts, the tool will remain on the cut line, which will make cutting easier and more efficiently. On the sawing of one aerated concrete block of a conventional standard 400×250 mm density D500 using a hand file, on average, it takes 5-7 minutes. In the construction of large buildings, the time costs of the preparation of the material will be significant.

Saber saw

Sable saws are power tools that look like powerful electrician. Structurally, a saber saw consists of a tool itself and a casing itself. Using a saber saw, you can cut both in a straight line and perform the so.called saber cut. The saw cuts out a aerated concrete block using flat cutting canvases that slightly resemble cavalry sabers. The canvas is moving rotating, the necessary speed mode, is installed using an electronic unit. Pil models are distinguished by the capacities of motors and the lengths of the working paintings. The amplitude of the oscillations of the canvas of the saber saw varies from 2 to 5 cm, the frequency of movement can reach up to 3000 moves per minute. The worn canvas easily changes to a new.

All modifications are equipped with heat discharge systems. The saber’s saw is distinguished by excellent accuracy of cuts, high efficiency, it can change the level of cut depth, it is possible to fit the blocks to the desired dimensions. With its help, partial stroke of aerated concrete is possible for wiring. Disadvantage. expensive tool. If it is planned to work with aerated concrete, then specialized canvases will be required.

Chain

Chain electric saws are attributed to universal products, since there is such a tool in almost every farm. The saw consists of a cutting chain, saw tire, a stretch mechanism, a lubricant, blocking the engine engine. For the optimal operation of the saw, it is necessary to adjust the tension of the chain using a special tire screw.

Pluses of operation: For the most part, professionals consider the use of chain saws the best option when sawing U-configuration gas blocks. When sawing from the end, you can get the perfect shape of the horizontal cut. Chain saw provides high sawing speed. It is also necessary to note the optimal balancing of the mass: it is convenient to use the chain saw when cutting at different angles and, if necessary, keep it above the head.

A significant disadvantage of electric saws is a relatively rapid dulling of the chain during a gas concrete cut, since the direct purpose of the saw is the cut of wood. For this reason, when buying a saw, it is recommended to purchase chains with a winning attack. Of course, such a chain costs much more than ordinary, but it will have to be sharpened in any case once.

When sawing two or three blocks, the circuit heats up, the metal expands, which leads to its stretching. To eliminate this problem, it is necessary to remove one link, then it will correspond to its previous parameters. For this reason, there are urgent recommendations on the operating mode. the tool should rest. If you work in heavy environments (for example, cutting aerated concrete blocks instead of a cut of wood trunks), the electric engine stars grows its teeth.

It should be noted that all models of electric motors in chain saws do not tolerate dust, one way or another, formed in the process of sawing aerated concrete. As a result. the saw was broken and it is unlikely to be able to restore it (except to change the engine).

Dawed an electric type “Alligator”

Ignorant people often perceive this option as a type of saber type, but they differ. With the functioning of the “alligator” are given in sliding the plane of the paintings. They move in the same way as the movements of crocodile jaws. They do not go back and forth, like saber analogues, cutting occurs due to the saw tire, which is installed fixed.

Saber saw

Electric saber saw is an excellent assistant for cutting aerated concrete that saves strength and time. The cost of such a saw is acceptable, and for private construction, its purchase is fully justified, especially since it can also be cut a tree.

The principle of operation of a saber saw in a shift blade, which very quickly performs rotational-setting movements. The length of the blade can be different, and for more convenient work we advise a canvas, more than the thickness of the block.

Advantages of the saber’s saw: good speed, incision of the cut, minimum groove width, acceptable price.

Wandering tools

Hand saw

The design of a saw intended to saw aerated concrete is very similar to a regular hacksaw for sawing a tree. The canvas is made of the same materials, but its thickness is much larger. This is done in order to avoid deformation when sawing solid materials. The use of manual saws is widely used to work with gas silicate blocks for small volumes.

It is performed by sawing of the additional blocks: these works usually occur during the final laying of the wall or corner places.

The best models of manual saws for gas silicate blocks have a cutting canvas made of carbide metal. for example, high.carbon steel. A saw, the teeth of which are made of a alloy of cermet, monocarbide powder tungsten and cobalt, is highly tolerated to the loads when sawing cellular concrete. Highness of wear resistance when working with gas silicate blocks have such blades as rapid. Manual saws for aerated concrete produce two types. ordinary hacksaw and with two handles. The latter is more convenient to use and noticeably facilitates the work.

The main differences of manual hacksaws for working with gas.sustainable blocks are:

YTONG

The manual hacksaws of this company have significant advantages, such as simplicity of use during operation, a high degree of stability of teeth to wear, a convenient handle. All this helps to saw gas.silicate blocks without much effort.

stroke, block, drill

“Enkor”

The handle is made of two.component material. A canvas, the length of which is 670 mm, is made of stainless steel and has strong teeth, carved using special technologies. The quality of the products of this company is confirmed not only by various research, but also by good reviews of buyers who needed to saw aerated concrete and not only it.

One of the most popular manufacturers in the market is the company “Zubr”. Each a hand.saw clove has a carbide attack, which allows you to easier to saw aerated concrete blocks. A long canvas allows you to saw gas.sustainable blocks both along and across.

Sable saw electric

Electric saw for aerated concrete. Such a saw is not only effective in its application, but work and care with it is quite simple.

Sable electric saw. this is an electric burner that at first glance resembles the design of a chain electric saw. But it differs in that sawing is carried out with special flat canvases (instead of a saw chain), almost similar to the canvases of a ray saw.

In the process of work, the canvas quickly move forward and forth with an amplitude of 30-50 mm, creating an imitation of the movement of an ordinary hacksaw.

A saw of this type easily cuts aerated concrete and other solid materials. The training of a saber electric saw is quite fast, especially if there is a skill of working with a chain saw.

Building a house from aerated concrete blocks.

  • number of moves per minute, frequency (2.5-3 thousand. moves per minute);
  • The length of the saw, amplitude (19-32 mm);
  • Cut depth for certain materials.

Electric saber saws are used at the workplace for cutting blocks, as well as for laying cable networks. Caring for such a tool is simple: periodically, using the oil, you need to drip any machine oil in special lubricants located in the saw blade.

California Hair Stylist Sets Client’s Hair on Fire to Get Rid of Split Ends

Dewalt

Scheme for the construction of a wall of aerated concrete blocks.

Sable saws of this company allow you to quickly and efficiently saw aerated concrete blocks. So, for example, the “Dewalt DW391 Alligator” tool is perfect for sawing large blocks. This saw has a number of advantages:

  • A very powerful engine, as a result of which there is a quick and high.quality cut;
  • Cooling is carried out through large ventilation holes in the housing;
  • The electronic speed control unit allows this saw to work with a variety of materials;
  • The saw case is well balanced, the weight is only 4 kg;
  • The level of vibration and noise of the working tool is quite low.

Bosch

Extremely convenient, reliable and functional tool that saws and processes aerated concrete. Easy Bosch Sable Spring Sat Sabbaths with electronic speed regulation, the simplest mechanism for replacing saw paintings received well-deserved positive reviews of construction work specialists.

Black Decker

Sable electric burner of this German plant is outwardly very similar to the usual chain saw. When cutting the blocks, two canvases are used. A significant disadvantage is the relatively rapid wear of the steel parts of the saw. The main advantage is the safety and ease of use of this tool.

Band-saw

Ribbon saw for aerated concrete.The belt saw is a multi.cut cutting tool used in lactopic type machines. It is a whole circular steel tape with teeth located on one side of the tape.

stroke, block, drill

The ribbon saw quickly and efficiently cuts gas.sized blocks. This machine has high performance, it allows you to saw aerated concrete about 20 times faster than using a hand saw. The guiding canvas is produced using special technologies from a solid metal alloy, the height of the working surface can be adjusted. The cost of such a machine is about 5000-6000 euros. Let us consider in more detail the Lissmac manufacturer’s tape saw, designed to cut gas.sized blocks. Aerated concrete blocks when using this machine can be sawn not only in a straight line, but also diagonally.

The main advantages of this sawing apparatus are:

Types of equipment

When cutting aerated concrete blocks, various equipment are used:

Equipment is manual and mechanical. You can cut aerated concrete material into any width and length, give any angle of inclination. With small work, manual equipment is used, if the volumes of materials are large, electrical tools are used. Do not advise using a cutting unit. a chain hacksaw.

You can divide the gas concrete blocks into the necessary parts using a cutting tool. a hand hacksaw. It is used for small volumes of work and if it is difficult to cut with a hacksaw. If there is no way to purchase a special cutting tool, they are by a hacksaw made with your own hand. So that a wood saw for aerated concrete blocks, on it, with a corner grinder, make teeth and dilute with pliers. This cutting device is suitable for cutting several blocks and will last a short time. This is a great option so as not to spend money on purchasing cutting tools.

However, it is better to cut aerated concrete slabs with a special tool, then the wiped edges will turn out to be smooth and even. Used in the form of special cutting tools:

Hand saw

With small volumes of work, a hand hacksaw is used. With its help, they finish the openings of windows and doors, also without it cannot be cope with when laying the initial tiers of walls. In order for the device that cuts the products to fulfill its function benignly, use auxiliary tools:

  • A metal corner, with which the correct angle of cut is controlled.
  • Ruler, marker or pencil, which are needed to determine the place of sawing.
  • Rubanok for gas concrete products, which equals the surface layer of masonry.

Aerated concrete is one of the hard materials, which means the choice of cutting tools should proceed from the quality of the cutting canvas. Drink with a hand hacksaw, which is designed for wood material, aerated concrete slabs incorrectly. It will take a lot of time and effort. The cutting element of the manual hacksaw should consist of carbide components with larger teeth. A hand saw is available with one handle and with two. The cost of the cutting tool is influenced by the distinctive properties of the tool and the manufacturer.

Saber saw

Sabric hacksaw, which looks like an electrician or electric drill, is an electric hand hacksaw. For its work, electric networks are needed. She easily saws aerated concrete products. The blade acts as the cutting component. The process of sawing looks in the form of progressive-revolutionary movements, with a movement in a straight line. When making a reverse movement, the blades rise. The design of the saber tool for the sawing consists of three parts, the two sides are mobile, and one, the middle part, is inactive and serves as a latch at the site of the saw. The plus of the saber saw is the accuracy and subtlety of the cut. Distinguish between a saber cut in the following indicators:

The saber tool differs in the method of sawing, it is saber and straight. This unit can be applied directly at the work site. Using a saber device for sawing aerated concrete structures, an accurate incision is provided, so it is used in the need to make grooves or fit the slabs to the desired size. So that the work on the aerated concrete unit is neat, the marking is marked before sawing. Tool depend on the performance of the unit and power.

Ribbon

A strip mechanism is used for sawing aerated concrete in large production production. It is a closed steel tape, on one edge of which the teeth are located. Cutting with a tape mechanism provides an even slice and releases twenty more workpieces once than when working with a manual electric tool. The speed of work is the ability to saw aerated concrete structures at once 2-3 pieces. The teeth of the mechanism are made of solid alloy and multilayer coating. The cost of the cutting structure is not everyone, and reaches five thousand dollars.

Electric saw

An incision in blocks of aerated concrete can be made by electric saw. Cutting canvases perform accurate cuts and approximate. Often an electrical mechanism with a sawing property in household construction is used. Electric saw is an inexpensive tool, so it replenishes the baggage of the building materials of every second man with its presence. The cutting tool has high technological characteristics and durable materials.

Strobores

SPEAL.SPROBROSE. Strobores designed to tease grooves in the block and grooves of grooves. You need to work on a construction site to work with a gateway. They are electric and manual. The advantages of the tool include:

Shtroboresis consists of a double.sided cutter, which is fixed to the handle. To accelerate the work, a tool with two holders is used. Before the saw, indicated with a pencil and ruler, the place of future holes.

Plane

Clocking aerated concrete blocks try to give them an even surface, but it does not always work out. The rubble can cope with this task, which leverates the surface of aerated concrete and will make it perfectly smooth. The shirt consists of a wooden base with crashed small teeth, which are located at an inclination.

Manual stroobores

The most common tool for strokes of aerated concrete is the usual strooboresis, which is a pipe with a handle. The principle of operation. press with force on aerated concrete and pull in the right direction, while choosing pieces of aerated concrete. For a more even cut, it is worth using a guide bar of wood, which is temporarily attached with nails or self.tapping screws. Of the important advantages, we note the lack of dust and noise during work.

Corner grinder and electro.stobbore

There are special nozzles for a corner grinder, which are two metal disks that leave behind two even grooves.

There are also specialized corner grinders, the so.called electrical cutters, in them you can adjust the width and depth of the string. After cutting, aerated concrete itself needs to be selected using a chisel and hammer. Of the advantages, we note the high speed and evenness of the saw, and out of the minuses.a large amount of dust, which will require connecting a vacuum cleaner.

Features of the material

Aerated concrete. a light building material that can be cut with your own hands, aerated concrete is made from a mixture of Portland cement and sand, into which the reagents forming foam are poured. often for this, ordinary powder aluminum, aluminum pastes and powder are used for this. As a result of their reaction with Portland cement, small air bubbles are evenly distributed by the structure of the solution.

Depending on the density, gas concrete blocks are divided into brands:

  • D300-D500-thermal insulation building materials.
  • D500-D900- structural and thermal insulation material.
  • D1000. D1200. structural blocks.

The strength of the compression of aerated concrete is 1.5. 3.5 kgf/cm². In the dry state, thermal conductivity of aerated concrete is 0.12 W/m ° C. The density of this material is 400. 1200 kg/m³.

Protective and supporting structures erected from aerated concrete belong to the I and II class of fire safety.

This material is environmentally friendly, since toxic substances are not released from it during operation.

Thanks to good operational characteristics, aerated concrete is widely used in low.rise construction.

Corner grinder and electro.stobbore

There are special nozzles for a corner grinder, which are two metal disks that leave behind two even grooves.

There are also specialized corner grinders, the so.called electrical cutters, in them you can adjust the width and depth of the string. After cutting, aerated concrete itself needs to be selected using a chisel and hammer. Of the advantages, we note the high speed and evenness of the saw, and out of the minuses.a large amount of dust, which will require connecting a vacuum cleaner.

Wandering tools

Hand saw

The design of a saw intended to saw aerated concrete is very similar to a regular hacksaw for sawing a tree. The canvas is made of the same materials, but its thickness is much larger. This is done in order to avoid deformation when sawing solid materials. The use of manual saws is widely used to work with gas silicate blocks for small volumes.

It is performed by sawing of the additional blocks: these works usually occur during the final laying of the wall or corner places.

The best models of manual saws for gas silicate blocks have a cutting canvas made of carbide metal. for example, high.carbon steel. A saw, the teeth of which are made of a alloy of cermet, monocarbide powder tungsten and cobalt, is highly tolerated to the loads when sawing cellular concrete. Highness of wear resistance when working with gas silicate blocks have such blades as rapid. Manual saws for aerated concrete produce two types. ordinary hacksaw and with two handles. The latter is more convenient to use and noticeably facilitates the work.

The main differences of manual hacksaws for working with gas.sustainable blocks are:

YTONG

The manual hacksaws of this company have significant advantages, such as simplicity of use during operation, a high degree of stability of teeth to wear, a convenient handle. All this helps to saw gas.silicate blocks without much effort.

“Enkor”

The handle is made of two.component material. A canvas, the length of which is 670 mm, is made of stainless steel and has strong teeth, carved using special technologies. The quality of the products of this company is confirmed not only by various research, but also by good reviews of buyers who needed to saw aerated concrete and not only it.

One of the most popular manufacturers in the market is the company “Zubr”. Each a hand.saw clove has a carbide attack, which allows you to easier to saw aerated concrete blocks. A long canvas allows you to saw gas.sustainable blocks both along and across.

Ribbon

The devices are designed to cut different materials through a closed tape made of metals using high.frequency alloys. A ribbon saw for aerated concrete has a advantage as the ability to adjust the height and good performance. The cutting of aerated concrete blocks is carried out by a tape canvas, such a technique allows you to do longitudinal and curly sections.

Chain saws are used to create U-blocks, from standard products. According to builders, it is recommended to clean chain saws from oils and lubricants. Since because of them, dust from aerated concrete sticks to the mechanism, which provokes accelerated wear of mobile elements.

The often encountered question is whether it is possible to cut a gas concrete with a chainsaw? According to masters, a strong abrasive arises during work, and the tool is quickly polluted and fails. Therefore, it is better to use a saw for a gas concrete electric, where a filter is put on the side of the brushes.

| Denial of responsibility | Contacts |RSS