How to cut off the floor skirting boat without rushed. How to cut off a ceiling plinth without a bunny

Than and how to cut a plastic plinth

The skirting board is an element that gives the finished finished look. The docking of the walls with the ceiling and floor should be made extremely neatly and beautifully. Choose the right skirting boards, agree with the walls, floor and ceiling, mount the corners. this must be able to.

Plastic skirting boards replaced the wooden ones used in previous years. They have a number of advantages. They are made of polyvinyl chloride (PVC), material that is widely used in industry and construction. Outwardly, they imitate any tree breeds. Easy to process, conveniently in installation. Immune to mold, fungus, damp, easily wash. They are much cheaper than wooden.

Plastic skirting boards are of different shapes, different colors. Skirting boards from different manufacturers differ among themselves. Each specific product needs to apply the appropriate processing technology for it.

There are types of plastic skirting boards focused on a certain flooring. carpet, linoleum or parquet.

Ceiling plinth is usually made of dense foam.

How to choose a suitable tool for pruning the plastic skirting board

To work with plastic skirting boards, you need the most ordinary tool that any master has and even many business men have.

Hand tools

From manual tools for work, a knife.haired woman with a small transverse cutting tooth, a knife.haired woman, a hand drill, screwdrivers, sharp knives, scissors are useful for work. The entire tool should be sharp, otherwise you can simply hush up the edges of the cut. If there are no skills, you should train on scraps of material with different tools.

floor, skirting, boat, rushed, ceiling, plinth

Power tools

From power tools in the work, you can use an electrician, an electric drill, an angular grinder.

From which ceiling skirting boards are made

Ceiling plinth can be made of different material.

But basically now, skirting boards are made from:

The choice of material is made depending on what the aesthetic load is assigned to these decorative elements.

Today, the most budget option is a foam baguette.

how to cut in skirting board like a pro

It is very easy to process, and it is very simple to mount it.

But the shortcomings of the foam are available: it is exceptional fragility and burns very well.

Polystyrene in comparison with polystyrene material is more durable.

It is distinguished by a matte surface and a more clear relief.

Polystyrene, unlike foam, practically does not burn and when touching it is not so easy to deform.

This material has a certain plasticity, which makes it possible to use it on convex walls.

If you need even more durable baguettes and other jewelry and the room has a large number of bends, then polyurethane will be the best option.

One of the components of this material is rubber and material eventually differs in good plasticity.

Polyurethane also has a low water absorption coefficient.

Therefore, it is used in those rooms where the humidity of the air is increased.

Polyvinyl chloride is also today one of the popular materials for the manufacture of baguette.

This is explained by an affordable price and a large number of colors.

Such a baguette is installed is very simple.

However, polyvinyl chloride and disadvantages have: it will not be able to repaint in a different color and it differs in sensitivity to high and low temperatures.

Of course, if the room should look gorgeous and respectable and it will be furnished with natural wood, then the baguette should be made of wood.

And their price depends on what kind of tree breed they are made.

The life of the wood is exclusively long.

However, such products are extremely low in flexibility.

Quick Clip Skirting

Calculation when installing wooden moldings requires a jewelry.

And the tree is often exposed to bug or mold.

Therefore, it should be treated from time to time with an antiseptic.

You should know when choosing a material how you will fix it.

Because for light materials (polystyrene, polyurethane, etc.) enough ordinary glue.

And wooden ceiling skirting boards will have to be mounted on dowels.

Features of cutting

Let us consider in more detail how to properly cut the angle on the ceiling skirting board using different materials.

Polyurethane

Polyurethane foam (in colloquial. just polyurethane) is a very good material for ceiling skirting boards. Due to good flexibility, it definitely adjacent to the base (the junction of the wall and ceiling), even if, due to building errors, the walls and ceiling are uneven. In addition, polyurethane is well washed, and therefore can serve for a long time. Low resistance to loads here is not a problem: there is almost no load on the ceiling plinth. We also have a separate article where the question of how to make a drywall ceiling and suspended ceilings made of drywall with your own hands are more details.

Polyurethane material for ceiling skirting boards

Cut the polyurethane skirting boat with the help of the stirred:

  • Measure the wall and ceiling in the area of ​​the junction.
  • Select a suitable stupor template for cutting.
  • Set the end of the skirting board in the knock and do it sawn down. It is recommended to use the end saw, but in its absence, you can take a regular hacksaw or, better, a metal file. it has a smaller step, and therefore the cut will be more precise.

Styrofoam

Foam is also often found as an element of decorative decoration of rooms. Its characteristic feature is increased fragility, so it is extremely accurate to adjust it at the place, the foam does not tolerate any deformations.

Cut it with the help of the rushed as follows:

  • Plinth plates are laid in the knock.
  • A cut is made. Unlike polyurethane polyurethane. soft material, and it can be cut even with a knife or better. stationery or construction cutter. It is better to use not a large, but even wooder, metal dick or ruler here. In extreme cases, you can make marks with a pencil corresponding to the slots of the stir, connect them using a ruler. and conduct a slot.
  • If desired, you can use a saw of any type, but you need to take into account foaming fragmentation. Therefore, it is better to moisten the blade in advance.
  • After trimming, fitting is carried out in the same way as for polyurethane.

Asterisk is important: foam is a fragile material, so the cutting tool should be sharpened as best as possible

floor, skirting, boat, rushed, ceiling, plinth

Polystyrene

Polystyrene has the same properties as the foam. Therefore, polystyrene skirting boards are cut as well as foam. The main thing here is the most acute sharpening of the cutting edge of the tool to avoid dyeing. At the same time, there is no need to process the ends with sandpaper: their edges are usually already quite relief to ensure a good adhesion of glue.

Wood

A wooden skirting board is infrequent and is expensive, so it is necessary to approach its processing extremely responsibly. Cutting technology looks something like this:

  • The cut end is fixed in the stizl.
  • Cut is made. You can do this with an ordinary hacksaw on wood, but it is better to use a special saw or saw for metal to avoid too wide sawing.
  • The edges are driven in place. If necessary, they are supplied with a strip machine (or a drill with a grinding nozzle), or cut.
  • The skirting board is attached in place with the help of glue or screws.

Asterisk is important: when fitting, you need to be extremely careful, it is better to close the uneven cut with a decorative lining or putty for wood than to open a too large array of wood

The skirting board made of plastic (polyvinyl chloride, PVC) is now widespread now. It is convenient because:

  • Easily cut by any tool.
  • Flexible, can be used even in uneven corners.
  • Usually has internal cavities, which means-can be used as a cable channel for laying electrical wiring or fiber-optic lines for the Internet.

PVC plinth has proven itself well

Cut a plinth from PVC as well as polyurethane. However, you need to take into account: the best tool, a hacksaw for metal with small teeth, is suitable only for thick skirting boards, in thin it can tear out pieces. Therefore, the best option for thin products is a stationery or a construction cut or a sharpened knife. To use it, you need a certain dexterity, so it is better to practice in advance on scraps or sheets of thin plastic.

How to detect an angle between crossing straight

In order to determine the angle of the angle between the crosses of the straight line, both straight (or one of them) need to be transferred to a new location by the method of parallel transfer to the intersection. Later this should be found the angle of the angle between the intersecting straight.

Instructions

If there is nothing at hand besides a sheet of paper and a pencil, then even these accessories are allowed to do with. To do this, he carefully roll the sheet of paper four times, while perfectly smoothing the bends. As a result, at the site of the double fold, get a right angle, the one that has 90 °. Fold the angle again in half, and you get the desired angle of 45 °. True in this case, a small error will manifest in the form of a loss of several degrees. For more accurate drawing, circle the right angle with a pencil on a blank sheet of paper, carefully cut it and fold it in half. this will give an angle of 45 °.

It is allowed to draw a corner with support for the rectangular triangle OV, which can be different. with angles of 90 °, 45 °, 45 ° and 90 °, 60 °, 30 °. Take a triangle (with angles of 90 °, 45 °, 45 °) and circle a sharp angle of 45 ° on a sheet of paper. If there is only a triangle with angles of 90 °, 60 °, 30 °, then on a different sheet of paper, circle a right angle, cut it, fold it and circle it on the necessary drawing. This will be an angle of 45 °.

The most accurate option is the construction in which the transport is used. Draw a fishing line for a trimmer on a sheet of paper, mix the corner point on it, attach the transporter and mix with a point of 45 °. Later, to combine them with each other.

How to cut a profile pipe at an angle of 45 corner grinding

It is exciting that even with the support of the circul is also allowed to depict an angle of 45 °. To do this, it is enough to have a depicted angle of 90 ° in front of you (say, with the help of a rectangular triangle A or by bending paper four times). After that, from the corner point, draw a circle with a circul. At the intersection of the circle and sides of the right angle, mix the points. Now, from any of the 2 points in the same solution of the circul, make two more circles. At the place of their intersection, you will get a point that you combine from the corner, as a result of which you get two corners of 45 °.

Useful advice for execution is more accurate drawing, so that the pencil core is sharp. A ruler and triangles to use wooden.

Three working methods for pruning plinths

In floor and ceiling skirting boards, the instructions for cutting are almost the same. But if on the floor of the crooked corner you can cover something, then on the ceiling this is already a problem, so we will pay more attention to how to cut the ceiling skirting boards.

Classic knocking method

Classic knock is a P-shaped bed with slots in opposite sides. A suitable part is put in this bed and is sawn through the slots in the sides. The idea is not new, the instrument is already several hundred years old, but, despite the simplicity of how to correctly cut the angle of the ceiling skirting board with the help of such a cashed, not everyone knows.

How to cut a ceiling skirting board in the corner with the help of a classic chusla, not everyone knows.

Tip: Ceiling skirting boards when cutting are applied to that side of the cubble, which is closer to you, and floor skirting boards, on the contrary, need to be applied to the side of the instrument from you. This is not a dogma, but this is much easier to work.

It’s easier to work with floor skirting boards, as the knock lies on a horizontal plane easier for you to navigate in the position of the skirting board. People are most often mistaken when cutting a ceiling fillet, it is simply incorrectly invested in the tool. There is a simple but important rule here.

Important: the board of the ceiling fillet, which touches the wall, should be directed to the upper edge of the side of the side of the station, and that part of the skirting board, which borders on the ceiling, is placed on the bottom.

At the corner, as you know, 2 sides, and so, in order to less mistakes, accustom yourself to ensure that the bar, which will be mounted on the right side of the corner, put into the knock on the right, and the bar, which is attached to the left, put it in the hand on the left. Details about the intricacies of the use of classical cushed is described in the video in this article.

How to correctly cut the inner and outer corner of the ceiling filler.

In addition to the classic P-shaped, there are two more types of such designs-this is a professional and rotary tool. As for the professional option, it is used only by masters. The device is quite bulky, but it turns at any angle and has a hacksaw, which can be fixed in the right position.

Professional knocking with the possibility of fixing hacksaws and details.

The rotary device can be safely called “” stupid. Of the advantages, there is only the possibility of a clear fixation of the angle of turning the bar. On the one hand, they simply work. put a corner, put it to the baseboard and cut off. But on the other hand, you need to get used to such an instrument, if you do not have an experience with a hacksaw, then you should not take a rotary knock.

Tip: when choosing a classic P-shaped chose, firstly do not take Chinese products. And secondly, try to buy models with the possibility of rigid fixation of the part inside, one of these models is shown in the photo from below.

With a stall with the possibility of fixing the part inside it is much more convenient to work.

Temple cutting method

Most often, both ceiling and floor skirting boards need to be cut under 45º. If a specialized tool is not nearby, then improvised knock can be drawn on a notebook leaflet. From the school geometry course, we know that the diagonal of any square in relation to the base has an angle of inclination 45º.

Postpone the angle of 45º by applying the skirting board to the diagonal of the square.

Then you need to draw a square and hold 2 diagonals in it. this will be the desired 45º. You just have to properly attach the baseboard to the leaf and mark. True, in order to cut off the plinth without guides to cut off a good eye and a faithful hand.

The method is universal applied

Cutting under 45º is a common option, but what to do if you need a different angle, and only a hacksaw and a pencil are available? It turns out that there is a very simple way out of this situation. Plus, this method is universal, it is suitable for both external and internal angles.

over, I can assure you that those angles that visually seem straight a couple of degrees have deviations. As a result, you buy a good tool, cut out clearly 45º, and when joining the gap between the skirting boards “crawls out”. Here this problem disappears. And then, using an example, we will consider how to cut a ceiling baseboard in the inner corner.

floor, skirting, boat, rushed, ceiling, plinth

Tip: so that the lines are inconspicuous, they can be drawn not with a pencil, but, for example, a nail or a knife tip.

Important nuances

If you tried, as you could, but a small gap at the junction of it still “got out”, do not be upset. In wooden filters, such a gap is easily covered with furniture wax. To cover the gap on skirting boards made of polyurethane, foam, plastic or gypsum, putty is perfect. Naturally, the color of the composition should coincide with the color of the skirting board.

Methods

In addition to cutting with the help of carpentry, in which the angles are clearly set (90, 45, sometimes 60 degrees) there are other methods. expensive. the use of a rotary rod or a rotary circular saw. Cut a corner with a tool where it can be adjusted and it is quite easy to install, it is easy. Cutting is either manually or using a circular.

The purchase of such equipment for decorating one room, bathroom or even apartment is unlikely to be justified, another thing is professional activity, in this case, of course, it is better not to save.

In order to cut a filler at home, you can do with a more budget option, preparing a homemade knock from plywood. It is important to clearly measure the corners and make the slots by which the plinth will be sawn down in the future.

In order not to confuse the sides of the baseboard and cut it correctly, at first it is better to apply it along with the stupor to the ceiling, the skill will gradually develop and it will be possible to do without repeated movements up and down.

You can also prepare a peculiar layout of struck on the cardboard, at the same time you will have to put the drunk plinth on the layout and mark it with a pencil. In order to cut the required angle, it is better to move it to a more convenient place, in addition, it is important not to spoil the layout.

There are methods of sawing off the corners and without. This is all the more relevant that the angles are far from always ideal, and the standard angle of 45 degrees may be wrong. In order to make an angle in this way, it is necessary to attach a piece of baseboard right on the ceiling exactly as it will be mounted. With a pencil, it should be noted on the ceiling width of the tall. By applying the baseboard to the other side of the corner, it should also be noted its width on the ceiling.

Two intersecting segments will be obtained. At this, again, you need to attach pieces of the baseboard to the ceiling and mark the same point on them.

It is necessary to cut off from the edge to the marked point, it is important to remember the parties with which the baseboard will fit the wall and the ceiling, it is impossible to confuse them in any case. Small flaws can be corrected during installation, cut with a clerical knife, if the plinth material allows. With wooden fillets, everything is much more complicated, there the knife will not help there.

The measurements “in place” allow you to cut both internal and external angles without large losses, although the latter are not often found, yet their decoration is significantly different.

We use the template

When you do not have a bunker, cutting the ceiling baguette is easily feasible if you make a device in the form of a template for this. With it, you can cut both narrow and large width of the cornice. The template may be useful in the case when there are uneven angles in the room. For the manufacture of the template, you need to perform the following procedure:

  • take a piece of dense cardboard and bend it at that angle that you measured in the place of the inner or outer joint of the walls; cut a cardboard at the place of fold;

If a small gap is detected when adjusting the joints, it can be fixed using a conventional finish putty or using silicone sealant.

The errors of joints on a wooden or aluminum fillets are removed with grinding places with a file.

The process of trimming should be even and accurate. To get such a skill, experts recommend training on small pieces of material.

Tips

To cut the ceiling plinth exactly, accurately and accurately, without excessive losses, experts recommend paying attention to the following important points:

  • In the process of cutting, the knife or canvas of the hacksaw must be directed only in the vertical direction;
  • For cutting, the baguette must be put on an even and hard surface;
  • If you use a knock, then for the convenience of work it can be fixed with self.tapping screws on a solid and motionless surface;
  • It is best to cut off the baseboard on the front side, then all the irregularities located on the edge of the cut will be turned to the inside of the product;
  • If you do not have at hand, then you will be able to replace it with a square table moved to the wall.

If you are not sure that you can cut off the cornice of the cornice for angular joints, you can purchase with moldings also overlays for decorating angles. They are internal and external, and then you will only need to fit the molding along the length of the wall, and glue the overhead decor in the corners.

In this case, the irregularities of the joints at the corners are unstressed to you.

Of course, the overhead angles will require additional financial costs, but it will save a lot of time, effort and nerves when preparing a plinth, especially if the room has imperfectly even corners and walls.

Necessary materials

A set of tools for the manufacture of an angular ceiling connection without the use of the stirring is not so great, and in principle does not differ from a set with a stupid. Almost every home has these tools:

The pencil can be used both by the usual chancellery with firmness of HB and construction, if you have it in stock. In all construction stores you can buy this pencil, it costs quite cheaply within 50-100 depending on the manufacturer.

You will need roulette and ruler for accurate measurements and conducting even lines, everyone has them in the house. It must be taken into account that without a ruler you will not be able to draw even lines for trimming angles by the first method.

Construction or stationery knife with replaceable blades. an indispensable assistant in the house. Its cost, like a construction pencil, is low, and it is always available, it will give you the opportunity to cut off easily and evenly necessary segments, cut the angle or cut off thin plates when adjusting the connection. Some skirting boards are made of material, which is recommended to cut only with a knife, and not with a hacksaw due to the softness of the material.

You will need a hacksaw only if the material from which the baguits are made is recommended to cut only it. A regular hacksaw with small cloves is suitable.

The ceiling plinth must be selected both from aesthetic and practical reasons. He must harmoniously fit into your design, cover the joints of the ceiling and walls, hide defects and irregularities. When choosing a baguette, it is necessary to take into account the material from which it is made. this affects the choice of tool for cutting and glue for installation, as well as the type of coating on which the baseboard will glue.

Step-by-step instruction

When installing a ceiling skirting board, first of all, you need to prepare the surface before gluing the baseboard, it must be cleaned from small irregularities, after you need to unwind the gluing places to create maximum adhesion between glue and the wall or the ceiling. The primer is the same as used to glue wallpaper or ceiling plates.

Before gluing, it is recommended to take a small piece of the baguette and practice cutting the corner joints so as not to spoil the excess.

So, you have prepared everything, and it’s time to start the process of cutting the corners. To create an inner angle, the first of the methods described above is perfect for you. If you have even walls, you can cut off equal pieces from the baguits, and cut out the corner joints from them, then simply glued long straps at point blank range to them. These manipulations will facilitate your work when pruning and exclude the possibility of extinguishing the baguette or its fracture.

If the walls have flaws, and you worry that the gluing place will then be noticeable, you can adjust the corner on the floor, and then glue.

When cutting out the outer corner, it must be remembered that the inner angle rests against the wall, and the external, on the contrary, protrudes above it. By analogy with the method described in the first method, you can try. The only difference will be that the skirting boards outside the wall is needed on the width of your bagette bar. Having cut the bar at the right angle and connecting them, you may need to adjust the angle manually, since the corners in our homes are often not 90 degrees close. The rest of the methods we described will allow you to make an external angle more easily. Just as when cutting out the inner angle, it is better to practice first. this will facilitate your work and reduce the waste of the skirting board.

Before gluing skirting boards, you need to make sure in the exact preparation of the connections. Modern mounting adhesives set very quickly, so you will have practically no time to correct the mistake of the mistake, and tearing the skirting board is the ability to break it and the need to re.clean the surface of the skirting board and the wall from glue. It is better to immediately remove excess glue with a small clean rag or sponge so that there are no traces left.

With proper patience and proper fitting, you can achieve a “seamless” connection, and your baguette will look whole, which will simplify your further painting and abolish the need to use the finish putty for smoothing connecting seams.

Step-by-step instruction

When installing a ceiling skirting board, first of all, you need to prepare the surface before gluing the baseboard, it must be cleaned from small irregularities, after you need to unwind the gluing places to create maximum adhesion between glue and the wall or the ceiling. The primer is the same as used to glue wallpaper or ceiling plates.

Before gluing, it is recommended to take a small piece of the baguette and practice cutting the corner joints so as not to spoil the excess.

So, you have prepared everything, and it’s time to start the process of cutting the corners. To create an inner angle, the first of the methods described above is perfect for you. If you have even walls, you can cut off equal pieces from the baguits, and cut out the corner joints from them, then simply glued long straps at point blank range to them. These manipulations will facilitate your work when pruning and exclude the possibility of extinguishing the baguette or its fracture.

If the walls have flaws, and you worry that the gluing place will then be noticeable, you can adjust the corner on the floor, and then glue.

When cutting out the outer corner, it must be remembered that the inner angle rests against the wall, and the external, on the contrary, protrudes above it. By analogy with the method described in the first method, you can try. The only difference will be that the skirting boards outside the wall is needed on the width of your bagette bar. Having cut the bar at the right angle and connecting them, you may need to adjust the angle manually, since the corners in our homes are often not 90 degrees close. The rest of the methods we described will allow you to make an external angle more easily. Just as when cutting out the inner angle, it is better to practice first. this will facilitate your work and reduce the waste of the skirting board.

Before gluing skirting boards, you need to make sure in the exact preparation of the connections. Modern mounting adhesives set very quickly, so you will have practically no time to correct the mistake of the mistake, and tearing the skirting board is the ability to break it and the need to re.clean the surface of the skirting board and the wall from glue. It is better to immediately remove excess glue with a small clean rag or sponge so that there are no traces left.

With proper patience and proper fitting, you can achieve a “seamless” connection, and your baguette will look whole, which will simplify your further painting and abolish the need to use the finish putty for smoothing connecting seams.

Several useful tips that will facilitate work and preparation for them

Next, we will talk about the tool with which you can cut. This section also contains useful information on the implementation of the joints of the skirting boards at the corners.

Choosing a tool for forming an angle

The most economical option is to buy a simple plastic jacket. It is a plastic unit with eight working slots. Such a device is designed only for two operations: cutting under 45, 90 and 22.5 degrees. The angle of 90 degrees will come in handy, for example, if you need to cut the socket in the middle of the molding.

Some devices go with eccentric fixators in the kit. They are preferable, since it is easier to work with it. the baseboard is clamped in the right position and is not shifted during cutting. Accordingly, if it happens, then the minimum and it will not be difficult to fit the angle.

How to cut a plastic plinth: simple plastic knock

floor, skirting, boat, rushed, ceiling, plinth

If you have to repair in your own house, then it may make sense to purchase a more serious tool. a swivel uniplipper knock. It is designed for cutting at an angle of 15, 22.5, 30, 36, 45 and 90 degrees. The design of such a risen includes 2 clamps. for a clamp in horizontal and vertical planes, as well as a limiter, which will allow to cut the workpieces for one length. The hacksaw here will be built.in. If it is not clear how to cut a ceiling plinth. a video review located below will help you.

How to cut a plinth in the corner: rotary knock

How to cut a ceiling plinth contains a detailed description of the rotary rod, and information on how to use this tool.

This will come in handy at your work

As you noticed, tags were mentioned in the text with an insulating tape. This is the most convenient way to mark the blanks, since the pencil is not always visible on the floor plinth, and it is sometimes difficult to reduce it from its ceiling dash. Bright pieces of islands are very clearly visible, and when they disappear in them, they are removed literally in one movement of the hand. There are no traces of glue after removing such marks.

How to correctly cut the angles of the skirting board: we take into account their view

To cut the angle, it is necessary to clearly represent the procedure for installing each element. The procedure depends on which conjugation is performed: external or internal. Attention deserves not only the direction of the cut, but also the spatial arrangement of the element. Therefore, understanding the order of work, you need to know what angle we are talking about.

We cut the inner angle

To cut the inner angle for floor plastic skirting boards, you should act in the next sequence given in the table.

When forming the inner angle on the ceiling plinth, the direction of the blade does not change, but the element itself is applied to the inside, and the lower part should be located on top.

Wright the outer angle

Wallowing the outer angle is performed in a slightly different sequence.

Attention! Ceiling is washed down by analogy with internal.

How to fit an angle more or less than 90 °

No matter how universal it is knocking, it is focused on the formation of a compound with a standard angle size. If the joint is carried out under another degree, difficulties may arise. Watch the next video to find out how to fit the conjugation in this situation:

Useful tips for installing skirting boards

The procedure for performing installation work largely depends on the place of fastening of the skirting board. To reliably fix the product on the surface of the floor or ceiling, read our tips.

Floor skirting board

To install the floor plinth, you should, together with the product itself, purchase the necessary components.

Depending on the quadrature and the shape of the floor, you must have in stock:

  • The outer and inner angle of the same color as the main profile.
  • Left and right ending.
  • The connector with which the straight sections will be interconnected.

To fix the panels, prepare a dowel-gvo. Their number is calculated taking into account the length of the future design. Step between fasteners 25-40 cm. If there are noticeable irregularities on the wall, the distance is reduced, ensuring the formation of the desired rounding.

Before starting installation, the walls should be prepared. After that, you can proceed to the installation. Installation usually starts with any free angle. Having checked the correctness of the position, remove the upper part, mark the location and drill holes for fasteners.

After twisting the dowel-gvo, the decorative bar is installed on the seat, pressing before the appearance of a characteristic click. The remaining parts are similarly mounted, and additional elements are installed in the places where.

Ceiling baseboard

Fixation of the ceiling plinth is most often carried out adhesive. Watch the next video if you decide to do work on your own:

Share in the Комментарии и мнения владельцев whether you have to independently cut and mount the baseboard on what tool and the way you used.

Want to know all the secrets and subtleties of how to glue the ceiling plinth. Councils of masters, recommendations for choosing material, step.by.step instructions and photos of ready.made work will help you to efficiently install the skirting board.

| Denial of responsibility | Contacts |RSS