How to cut the floor plastic skirting board. Necessary tools for cutting

How to cut off a plastic skirting board: how to cut off and how to cut the methods of cutting

The skirting board has long become an integral part of the interior and is actively used in the design of the room. Manufacturers make this interior item from various material, which ultimately can affect the choice of the tool and method of cutting if it is necessary to obtain perfectly accurate corner compounds. The article will be affected by the question of how to correctly cut the skirting board in order to be able to join two parts as accurately as possible without the use of decorative linings.

recently, on the market it was impossible to find other varieties of skirting boards, except for wooden. These products are still popular, although they gradually hand over borders more practical and durable products.

  • Wooden. This is a classic option. The reason that such a plinth is still in demand is the source material used in the manufacture. Indeed, during the construction of eco.zhila, people opt for products made of natural materials. Wood products are made of various wood species, and therefore differs in decorative qualities and in the duration of operation.

Wooden skirting boards

  • Openced. Various materials can be used for the manufacture of the main part, but as the upper coating, exclusively veneer from high.quality wood species are used. During external examination, without knowledge of distinctive features, an veneered plinth is practically no different from a wooden.

Openced skirting board

  • PVC plinth. This variety of products is becoming more popular every year, thanks to its practicality and low price. The plastic skirting board is made with various characteristics, which helps to choose products exclusively for the needs of the homeowner. For example, for semicircular walls, manufacturers are offered flexible options, in addition, they are practically not inferior in decorative properties of wooden skirting boards.

Pvc Clintus

Advantages of plastic products

Compared to their analogues made of wood or wood.fiber plate, plastic skirting boards have a number of advantages. Their undoubted virtues include:

  • Durability and strength.
  • Moisture resistance. They are suitable for installation in rooms with high humidity (bathrooms, showers and toilets).
  • They do not need to be painted or other protective coating.
  • A huge selection of colors is presented on the construction market: from various plain.tree wood imitating the structure of expensive wood. Easy to choose fillets for any interior solution of the room.
  • Simplicity of processing and mounting to the wall.
  • Convenience with subsequent care. The only restriction: it is unacceptable to use abrasive cleaning products that can scratch the upper decorative layer.
  • Affordable price.
  • Safety for human health and animals. All modern polymer materials of this purpose are made in strict accordance with sanitary standards and requirements.

A few words about tools and materials

Floor skirting boards are now made of wood or polyvinyl chloride (PVC), in other words, from plastic. The ceiling fillets have a little more list:

The assortment of ceiling skirting boards is much wider than that of the floor.

  • Polyurethane. these skirting boards have good elasticity and can bend radial and other curved surfaces, but they need to be cut to clear corners in any case;
  • Foam. the easiest budget option, the price of foam plinths is low and they are cut very easily;
  • PVC. the principle is the same as the floor skirting boards, but the lineup is much wider;
  • Wooden. similar to the floor, only there are still wide models;
  • Gypsum-with the advent of polyurethane and foam, gypsum ceiling fillets faded into the background, firstly, they are heavy, and secondly, fragile. But in fairness to mention them is worth.

Since it is impossible to correctly cut the ceiling skirting board and its flooring with a good tool, we will dwell on this issue a little more.

The best, almost ideal tool for cutting any skirting boards and not only is a trim saw with a rotary bed. The high.speed disk makes smooth and exact sections, and the bed in these units turns to any corner. The problem is only in the serious cost of this tool.

The end of the saw is almost the perfect tool for cutting skirting boards and not only their.

It is believed that one of the best hand tools for the exact cut of small bars is a training saw. In principle, this is true, but I will tell you honestly, really high.quality saw, even with the current assortment it is not easy to find. If you still decide to buy a similar tool, then take a saw with a small tooth.

The training saw is convenient when working with a stupid.

Theoretically, polystyrene and polyurethane can be cut by any sharp and durable knife. But at the same time you need to have a firm hand and at least a little experience in cutting foam. Plus wide fillets with a knife is very problematic to cut.

Without experience, making a clear cut with a knife is very problematic.

Personally, in the absence of ending, I use only a hacksaw for metal. It is suitable for cutting absolutely any material, from foam and to wood. By the way, they often ask the question of how to cut a plastic skirting board for the floor, and so. take a hacksaw for metal and you definitely won’t make a mistake.

For cutting skirting boards, a hacksaw for metal is considered one of the best tools.

Three working methods for pruning plinths

In floor and ceiling skirting boards, the instructions for cutting are almost the same. But if on the floor of the crooked corner you can cover something, then on the ceiling this is already a problem, so we will pay more attention to how to cut the ceiling skirting boards.

Classic knocking method

Classic knock is a P-shaped bed with slots in opposite sides. A suitable part is put in this bed and is sawn through the slots in the sides. The idea is not new, the instrument is already several hundred years old, but, despite the simplicity of how to correctly cut the angle of the ceiling skirting board with the help of such a cashed, not everyone knows.

How to cut a ceiling skirting board in the corner with the help of a classic chusla, not everyone knows.

Tip: Ceiling skirting boards when cutting are applied to that side of the cubble, which is closer to you, and floor skirting boards, on the contrary, need to be applied to the side of the instrument from you. This is not a dogma, but this is much easier to work.

It’s easier to work with floor skirting boards, as the knock lies on a horizontal plane easier for you to navigate in the position of the skirting board. People are most often mistaken when cutting a ceiling fillet, it is simply incorrectly invested in the tool. There is a simple but important rule here.

Important: the board of the ceiling fillet, which touches the wall, should be directed to the upper edge of the side of the side of the station, and that part of the skirting board, which borders on the ceiling, is placed on the bottom.

At the corner, as you know, 2 sides, and so, in order to less mistakes, accustom yourself to ensure that the bar, which will be mounted on the right side of the corner, put into the knock on the right, and the bar, which is attached to the left, put it in the hand on the left. Details about the intricacies of the use of classical cushed is described in the video in this article.

How to correctly cut the inner and outer corner of the ceiling filler.

floor, plastic, skirting, board, necessary

In addition to the classic P-shaped, there are two more types of such designs-this is a professional and rotary tool. As for the professional option, it is used only by masters. The device is quite bulky, but it turns at any angle and has a hacksaw, which can be fixed in the right position.

Professional knocking with the possibility of fixing hacksaws and details.

The rotary device can be safely called “” stupid. Of the advantages, there is only the possibility of a clear fixation of the angle of turning the bar. On the one hand, they simply work. put a corner, put it to the baseboard and cut off. But on the other hand, you need to get used to such an instrument, if you do not have an experience with a hacksaw, then you should not take a rotary knock.

Tip: when choosing a classic P-shaped chose, firstly do not take Chinese products. And secondly, try to buy models with the possibility of rigid fixation of the part inside, one of these models is shown in the photo from below.

How To-Undercut Door Jambs For Laminate Flooring-DIY

With a stall with the possibility of fixing the part inside it is much more convenient to work.

Temple cutting method

Most often, both ceiling and floor skirting boards need to be cut under 45º. If a specialized tool is not nearby, then improvised knock can be drawn on a notebook leaflet. From the school geometry course, we know that the diagonal of any square in relation to the base has an angle of inclination 45º.

Postpone the angle of 45º by applying the skirting board to the diagonal of the square.

Then you need to draw a square and hold 2 diagonals in it. this will be the desired 45º. You just have to properly attach the baseboard to the leaf and mark. True, in order to cut off the plinth without guides to cut off a good eye and a faithful hand.

The method is universal applied

Cutting under 45º is a common option, but what to do if you need a different angle, and only a hacksaw and a pencil are available? It turns out that there is a very simple way out of this situation. Plus, this method is universal, it is suitable for both external and internal angles.

over, I can assure you that those angles that visually seem straight a couple of degrees have deviations. As a result, you buy a good tool, cut out clearly 45º, and when joining the gap between the skirting boards “crawls out”. Here this problem disappears. And then, using an example, we will consider how to cut a ceiling baseboard in the inner corner.

floor, plastic, skirting, board, necessary

Take a filler, apply it on one side of the corner and with its help draw 2 lines, along the wall and on the ceiling.

Tip: so that the lines are inconspicuous, they can be drawn not with a pencil, but, for example, a nail or a knife tip.

Important nuances

If you tried, as you could, but a small gap at the junction of it still “got out”, do not be upset. In wooden filters, such a gap is easily covered with furniture wax. To cover the gap on skirting boards made of polyurethane, foam, plastic or gypsum, putty is perfect. Naturally, the color of the composition should coincide with the color of the skirting board.

Installation process

Installation does not require any special skills. Following the classic installation scheme, the product will not begin to flow and deform. Proper installation will become a guarantor of good protection against moisture and mold. Therefore, relate to installation should be seriously and responsible. The installation of a plinth is reduced to the following stages:

  • First of all, you should carefully clean the edge of the bath and walls. There should be no bugs, mold, fungi, the remnants of old glue and other formations. Wipe the surface with alcohol or other fat.free solution. Let the processed areas dry, you can use a hairdryer for drying.
  • The next step will be measurements of the bath and their marks on the curb. Many apply a plinth and mark it on it with a pencil. Having finished measuring, proceed to pruning the profile. Pruning, attributing to the joints between the walls, is done at an angle of 45 °. For this, a stamp is used. This is a special carpentry device for cutting profiles at the right angle. Thus, at the junction of skirting boards, another gap is not formed, the presence of which is undesirable.
  • As soon as the first two stages are completed, the edge of the bathtub and the wall should be glued with a special tape. This will protect the surfaces from glue or other fastening material. The bathtub itself is covered with a film in order to avoid random ingredients of glue or sealant on the surface.
  • Apply foam, sealant or construction glue to the joints of the corner with the bathroom and wall. A layer of foam or other type of fastening should not be too thick. The plinth is laid on the layer of glue and it is well pressed. If the excess foam appeared when pressing, immediately remove them. The time for the capture of the baseboard is 20 minutes. After this period of time, the joints of the joints with a sealant should be treated both from the side of the bath and from the side of the wall.

Wallpaper in the bathroom, methods of choice

This is a classic installation diagram of a plastic skirting board. There is another way to attach corners. But it is used at the stage of construction or repair. The laying of the plinth occurs during the glue tile adhesives on the walls. It consists in the fact that the wall of the profile entering the wall hides under the tile itself. This is a more time.consuming and very complex technological process. However, he is more reliable and durable. On the other hand, if you want to remove or change the baseboard, you will have to break the tile. This method of laying the profile is quite rare.

With the proper installation of the baseboard, the water will not penetrate the space between the bathroom and the wall. If the product does not fit in some places, it glues again. It is very important to handle joints and places of joints with a sealant, otherwise the moisture will penetrate into the micro.configuration, and the expediency of the entire structure will come to naught. The quality of the profile does not matter if it is incorrectly installed. It is very important to make installation according to the basic rules of the classical installation scheme.

Useful tips

Formation of angles

  • If possible, all slices are recommended only with the help of. It is this device that will help to achieve the most accurate result.
  • After trimming, it is necessary to carry out the mandatory grinding of the end parts of the plinth. This approach will help to get a more dense connection.

The use of a rotary stir

  • If the skirting boards have a cable channel, then it is initially recommended to remove the upper cover for masking wires and fastening places.
  • Cutting corner parts is carried out at the very beginning, so that in the process of work not to be distracted by this procedure.

Uglomer and knock for non.standard angles

  • To decorate the corners, use special angular joints. Also do not forget about the end parts of the skirting board. close them with decorative plugs.

Elements for connecting skirting boards

Methods of cutting plastic skirting boards

Subscribing the plinth. in appearance a simple, but responsible activity. If the corners are cut off incorrectly, then they will not joke correctly and all the work will go down the drain, since the product will no longer have a beautiful look. there will be gaps between two plinths and decorative inserts (corners, joints, etc. D.).

Most often, for cutting the skirting board, a regular hacksaw for metal is used, which has small teeth. However, it is not suitable for thin skirting boards, since the product will simply break under the influence of this tool.

Sometimes a baseboard is cut and scissors for metal. But the method also has its drawbacks, because the product can crush under pressure from the blades. Less commonly, but the angular grinder is also used. However, a fishing line for a trimmer of sawing after it can be inaccurate, since the tool often “tears” soft plastic. Especially often this method is unsuccessful among beginners in the world of repair, who still do not know how to control the work completely. So the corner grinder can be attributed to rather specific methods.

On a note! For cutting thin skirting boards, you can use a sharpened knife or a stationery knife. But such work requires some dexterity, therefore it is recommended to first practice on the scraps of an old plinth of plastic.

The most important thing in the procedure of cutting skirting boards is compliance with the necessary geometry. The procedure is never performed “by eye”, the accuracy of measurements and accuracy are important here. Therefore, there are other methods of cutting skirting boards.

Lack of accessories involves the use of other methods of connecting skirting boards. This is an option with templates for cutting and without them

Cutting on a stencil

The method is recommended for cutting products designed for installation in the form of rooms non.standard in shape with angles that differ from a standard level of 90 degrees. Stencils of the desired angle can be made of paper or thin cardboard. First, stripes are cut out of the rough material, which have exactly the same width as the skirting board. Then they are applied to the corner and fixed, after which they are cut in the shape of the angle. Then, already on the received stencils, the baseboard itself is cut at the required angle.

Cutting plastic skirting boards on a stencil

The quality of their installation depends on the trimming of the corners of the fillets. As we found out, it is quite simple to cut the corners correctly, even if the walls of the walls are not straight. The only thing is to do this work carefully and slowly, so that the joints of the joints are inconspicuous.

Ceiling plinth. filler

To do this correctly, it is important to strictly comply with the existing recommendations and the rules of finishing work. And then the result will please you

There are no difficulties in fastening the filter (the so.called this element): in fact, all varieties of products are attached to reliable glue.

In order to hang a ceiling skirting board, even inexperienced repairmen have no difficulties. Excites them completely different: how to correctly cut the ceiling plinth? In fact, almost every room, no matter what an intricate form it is, is equipped with angles.

And in these inner corners, individual skirting elements should be beautiful and evenly joined. And in the premises of a particularly complex configuration, you will have to wrap up over the outer corners. Let’s try to figure out how to be in each of these situations, and how to cut the desired part with the help of available tools.

Sninch materials and cutting methods

First of all, let’s try to decide what a filler can be made of, and what is the best material to cut.

On sale today you can find foam products (polyvinyl chloride), wood, polystyrene foam and polyurethane.

Perhaps one of the cheapest ones is a foam plinth, which is a fragile, soft and brittle material.

Even fingers can leave dents on them, cuts and defects are easily formed on them. It is quite difficult to cut a beautifully and evenly angle in a skirting board based on polyvinyl chloride.

In an inexperienced master, a large amount of purchased material can go to waste precisely for this reason. This polymer also has high electrostatic properties, which explains its ability to collect dust.

Cutting such a plinth is most convenient with a hacksaw or a sharp building knife.

Polistyle foam products are also inexpensive, although this material is a more strong analogue of traditional foam.

It is also processed by a sharp tool.

Sloths made of extruded polystyrene are a little more expensive, they are somewhat denser and it is harder to cut them. But they crumble much less and break.

Therefore, cutting them is more convenient and easier. For this purpose, it is convenient to use a hacksaw or a sharp knife.

Polyurethane skirting boards for the ceiling are currently one of the most expensive.

But they justify their cost: moisture resistant, rather durable and dense, rather elastic.

The baseboard located above the kitchen plate can be deformed and even crackle a little.

They are perfectly cut with a special knife, without forming a baby. But these products are very sensitive to temperature differences.

Wooden skirting boards for the ceiling are quite heavy and dense products, hard and durable.

They are well lended on a special shallow hacksaw. You can also use a reliable metal canvas. So how to cut the ceiling baseboard correctly?

Ready.made factory corners

Note that each master has the opportunity not to pour over the exact clipping and adjustment of the corners.

floor, plastic, skirting, board, necessary

In a construction store you can purchase a factory corner element, into which the prepared edges of the skirting board are easily inserted.

It is enough to measure the necessary length of the workpiece, and cut it at right angles.

All defects and flaws will hide this special element. But in such a convenient way it is not always possible to use, since the standard dimensions of such factory corners can differ markedly from the size of the skirting board itself.

Such corners will stand out with its disproportion, and it will not look very neat. But if the design of the premises and the size of the blanks allow us to use this method, then do not neglect them.

Those who have to use one of the ways to trim the ceiling plinth will come in handy for the following tips.

Cut the angle of the ceiling plinth using

As written above, trimming the angle can be done both with the help of a special tool. drove, and without it. The set of other items that you will need is the same in both cases: a hacksaw, a knife for cardboard, an angular and a pencil, a stepladder.

Which is better to purchase for trimming

This article will give a description of work with the simplest stupor, such as in the left side of the photo. It is possible to cut the baseboard at an angle of 45 and 90 degrees. this is the necessary minimum. And on the right side of the photo. turning point. Its device is more complicated, includes a built.in hacksaw and allows you to do the cutting of material at different angles. Of course, this option is more convenient to use and provides more trimming options.

However, if you are not the owner of a private house where you have to take a carpentry periodically, it would be better to do the simplest option. For comparison, the usual knock for a ceiling plinth costs 100-350, and at the end of the repair it can be thrown into the balcony or completely throw it out. The turning point can cost the amount of one and a half thousand, plus it must then be stored somewhere in proper conditions.

How and how to cut a plastic skirting board: ordinary and rotary knock

There is another way to cut a ceiling plinth. Video on how you can cut the baguette with the end saw. In addition, in it you will find several useful tips for cutting on ordinary stuplets.

Pay attention: Before making the first incisions, you need to carefully measure the baseboard. So you will avoid unnecessary expenses.

We start cutting: inner corner

We take ceiling molding, which will be located on the left and put in a corner so that it is tightly pressed by the end to the opposite wall and correct, if necessary, the length of the segment. We mark in any way the side that looks down.

Now we are going to the strules: ceiling molding is placed in the device glory to the right, the bottom side closer to you. We have a hacksaw on the right to the left. Now you can cut the angle. In the diagram it is the left side of the figure. We also make pruning for the right molding.

How to cut the angle of ceiling plinth: the location of the baguette in Stusl

Trimming the outer corner of the ceiling molding

Here we act according to the same plan as when cutting the inner angle: we apply to the wall. check the correspondence of the length. mark the point of the vertex of the wall of the wall on the lower edge of the baguette. we go to the stitches.

To cut the outer corner, ceiling moldings are placed in the device in the same way as for the internal. We only make an amendment to the point of the top of the corner, which we put on the baguette. It should coincide: with the extreme left slot for the left ceiling baseboard, and for the right, respectively, with the extreme right.

How to cut off the angle of ceiling plinth: the correct position of the baguette

Please note: in the article we describe each stage, starting on the left side of the wall. However, in fact, it does not matter much

You can start working from any side.

Trimming of the angle of ceiling molding having a large drawing

Sometimes a pattern on the surface of the curb is very large, and it takes just at the joints in the corners. In this case, we have to puzzle over how to cut the corner of the ceiling plinth, and combine the sides without violating its overall composition. In fact, there is nothing complicated:

  • Cut a section with a pattern of 5 cm from the ceiling molding. from each side.
  • Divide the resulting segment in half.
  • Now we make markings and trimming as described above.

If you get minor flaws in the connection, we mask them with a putty with putty, after the baguette is installed on the wall and the glue drying out.

How to join the corners of the ceiling plinth, if it is wide and with a large pattern

How to cut floor skirting

In the process of independent laying of floor skirting boards, a problem may arise in how to properly carry out an incision of floor skirting boards in the corners. The article widely discloses this issue, as well as the basic methods of cutting skirting boards are considered.

The optimal cutting tool

The floor plinth can be made of various materials, in particular, of wood, plastic, foam or glued wood chips. Each type needs its own tool that is appropriate.

When working with a foam product, it will require the use of a mounting knife. To cut the angle on a floor plastic skirting board, which can be covered with veneer, it is better to use a hacksaw for cutting metal.

When cutting wood skirting boards, the most suitable choice will be a carpentry hacksaw with smaller teeth.

Cutting floor plinth using

For professional cutting of angles, there is a special carpentry tool called the stupid. It allows you to accurately cut out various angles. A knock on a workbench or desktop is installed.

The skirting board is invested in it so that its cut edge enters one of the slots of the cheris, which goes at the required angle.

After that, the cut.off rail is securely fixed, a hacksaw is inserted into the slot, and the floor skirting boat is cut off at the right angle. The cut is accurate and even.

Using a ruler and a pencil in the absence

Before cutting the floor plinth in the corners, it is also worth studying alternative methods for performing this operation. For example, if there is no bid at hand and it is urgent to cut a certain number of skirting slats, then one of the solutions to the problem will be a cut of angles by using marking.

This will require a pencil and ruler. Using the latter, the width of the plinth is measured, and the resulting value is deposited from the end of the Reiki. Pencils are drawn for a trimmer from the angle of the baseboard to a measured mark. The angle is cut along it.

The response part of another skirting board can be cut in place by applying an already trimmed rail.

Cutting the floor skirting boards of complex geometry, you will have to carefully measure all the corners. Cut edges of the rails can be polished with fine sandpaper. When installing floor skirting boards, you should carefully check the density of the angles of individual rails in the joints. The formation of large gaps is not allowed, and barely noticeable small cracks can be hidden under the finished corners.

2013-10-17ka cut the floor skirting board Reviewed by vash-remontik.ru on OKT 17. In the process of independent laying of floor skirting boards, a problem may arise in how to properly carry out an incision of floor skirting boards in the corners. In article W, in the process of independent laying of a floor skirting board, a problem may arise in how to properly incriminate the floor skirting board in the corners. In the article W Rating:

How to make an angle on a ceiling plinth. internal and external with photo and video

Varieties of ceiling skirting boards and scope

Before moving on to the issue of cutting the product, consider its varieties. After all, it depends on the choice of this finishing element whether the premises will receive the desired visual volume and whether it becomes more comfortable and pleasant gaze.

It is not so difficult to choose the ideal option for finishing the ceiling joint, which will harmoniously combine with the design of the room, because the range of products today is very wide.

On sale there are ceiling skirting boards (filtles) made of different materials: plastic, foam, polyurethane, polystyrene foam, wood and gypsum. At the same time, all the strips can have different colors, texture, profile configuration, as well as dimensions.

Consider the features of the use of fillets depending on what material they are made of.

Knowing which type of skirting board is better to use in a place that needs to be finished, it will be easier for you to navigate when choosing a product and paying maximum attention to creating your unique interior design.

  • Plastic products, in addition to decorative function, can be used as a groove for attaching wall PVC panels. Such fillets are not glued to the surface, but attached to a pre.mounted frame by means of brackets or screws.
  • It is advisable to use polystyrene straps for decoration of suspended gypsum plasterboard ceilings. They can also be installed on the concrete base itself, previously plastered. This is the most budget version of the ceiling skirting board, since the product has a rough surface that is subject to contamination. Therefore, it is advisable to apply a layer of paint to such fillets after installation.
  • Polyurethane decorative elements are used for the final decoration of false polos from polyvinyl chloride panels. Fixation of the Scabel is carried out using special glue for PVCies.
  • The ceiling plinth of polystyrene foam is a universal finishing element, since it can be used to decorate the cooled surfaces, as well as ceilings lined with plastic panels. The plinth can be mounted on a special glue or gypsum putty.
  • Gypsum products are often used to give the interior a certain pomp, characteristic, for example, for royal houses. Installation of such skirting boards is performed on gypsum materials, that is, a putty or alabaster.
  • Blindel made of wood is a classic option for decorating ceiling-wall joints. This is the most expensive option for the plinth, but also the most durable.

Wooden products are environmentally friendly, durable and durable

Gypsum plinths were often installed in the houses of noble people

Polyurethane baseboard twists corners, giving them a more attractive look

Foam plinth goes well with ceiling tiles and wallpaper

Plastic skirting boards can serve to fix wall panels

The first question that people who gathered to install the skirting board ask themselves. how to cut it? The tool is selected depending on the material from which the filler is made.

For example, polyvinyl chloride products have a half structure. Therefore, so that when cutting the edge of the cut, the cuts turn out as even as possible, you need to use a hacksaw with small teeth.

Otherwise, cracks and chips may form on the decoration.

The best option is the use of a metal saw. its teeth are small, and the width of their divorce is suitable. However, the use of a hacksaw is limited by products with a rigid structure, that is, for thin.walled fillets, it is not suitable. The fact is that the teeth can greatly damage the surface of the baseboard.

You can also use a hand jigsaw for cutting fillets. When cutting products with such a tool, the corners are most even as possible. But this device has several disadvantages. Due to the low length of the cutting canvas, the use of cheris (a special tool for cutting skirting boards) becomes very problematic. In addition, the cut is carried out slowly.

What is knocking?

High.quality pruning of the product is possible only with strict observance of geometric shapes.

When installing the skirting board, the fulfillment of this condition is extremely important, because to obtain a neat connecting seam between decorative elements, it is necessary to have an even cut.

If this procedure is “by eye”, then the best.case connection of two skirting boards will not be made, because the ends will not match each other.

The highest quality slice can be performed when using a special carpentry tool called the stupid. Its design can be different, but the principle of work always remains unchanged.

There are devices with manual adjustment of the cut angle, but often builders use the standard variation of the tool, which is a wooden or plastic tray with vertical grooves in the walls to insert a saw.

Thanks to the strules, you can easily perform a vertical pruning of skirting boards at an angle of 45 and 90 degrees.

HOW TO cut a skirting board while it’s attached to the wall.

In addition to cutting tools and carpentry, when installing a filler, you may need: pencil, transporter, self.tapping screw, assembly glue and sealant.

Unging cutting technology

Swap of fillets for the outer angles is performed in the opposite direction

You can cut off the baseboard with the help of and without it. Consider each of the ways. High.quality cutting off the angle through a special tool is very simple. First, the necessary length of the filler is measured.

Then the first skirting board is laid in the knock, and the cutting tool is inserted into the vertical holes. The location of the hacksaw is selected based on what angle you need to cut off the product. Next, the cut is made.

At the second stage, the pruning of the second bar is performed, which will be combined with the first. In this case, the hacksaw should be inserted into opposite grooves at a similar angle.

Camping of angles without using a carpentry tool is carried out by marking at the installation site. The greatest inconvenience in this case is to keep the decorative element under the ceiling.

Which skirting board is suitable for a stretch ceiling and how to glue it

How to make a warm skirting board using European technology

How to dock the ceiling plinth or methods of cutting

Methods of cutting

The process of shape formation of angles may vary significantly. Each method has its own distinctive features that must be taken into account when performing work. Having decided to take advantage of a certain way, it is worthwhile to figure out how the excess material is cut off in each case.

We use a stencil

The method is relevant when decorating a floor surface in rooms with non.standard configuration. In this case, other methods become an inappropriate option. With their help, it is quite difficult to give the edge of the cut the right direction. You have to constantly adjust the configuration of the plinth, while it is possible to get the required form.

Avoid errors in the formation of the surface allows the manufacture of a stencil, which quite accurately repeats the configuration of a non.standard wall. It is made of thin cardboard or fairly dense paper. Its thickness should fully correspond to the thickness of the floor plinth.

The work is performed in the following sequence:

  • prepare material for suitable thickness and length. He must have sufficient rigidity, so as not to deform during the work process;
  • Apply cardboard as tightly as possible to the wall. The final result largely depends on this stage. If the stencil is not of high quality, you will have to adjust each element in place, which will significantly increase the duration of the work performed;
  • Using the clerical knife, the amount of material is excessively removed, achieving the full compliance of the cut line and the configuration of the wall. Instead of a clerical knife, you can use an electrician. However, in this case, it is necessary to have sufficient qualifications for high.quality work. Otherwise it will not be possible to accurately repeat the required configuration. The fishing line for the cutting of the cut should be perpendicular to the line of conjugation of the wall surfaces;
  • control the quality of the manufactured template;
  • Cut the mating fragments of skirting boards according to the prepared template;
  • Check the quality of the work performed;
  • Perform the installation of skirting boards.

We use a knock

Fetling is an indispensable device widely used in the performance of various types of finishing work. The performance of the product allows you to cut off the fragment at the right angle. The P-shaped device has special slots that are used as guides when cutting fragments into size.

To cut off the section of the skirting board of the desired length, the product is laid inside the wort, pressing the wrong side. When laying the front side forward, there is a risk of damage in the process of cutting the product. The edge of the panel in this case is located so that the edge of the panel remains inside the diagonal slot.

Attention! If the sizes of the wort exceed the geometric parameters of the skirting board, it is worth making sure that the product is evenly pressed against the groove side of the device. Only after that it will be possible to cut off the baseboard in size.

We use a pencil and ruler

Not everyone has a special tool. Free funds are required to purchase it. Not everyone is able to make a template qualitatively. Even a slight deviation from the required parameters will significantly worsen the final result. In this case, you can use a leaf, pencil, ruler.

The work is performed in the following sequence:

  • measurements are performed on the surface of the wall;
  • The obtained values ​​are transferred to a plastic skirting board, on which a fishing line is formed with a pencil for the trimmer of the future cut;
  • an excessive amount is cut off by the chosen tool.

Attention! With a complex configuration of the floor surface, it will be necessary to measure the corners of the room with particular thoroughness, repeatedly redesigning the obtained values. This will avoid error.

We drive in the place

Not always thorough preparation and measurement of the geometric parameters of the walls ensures the accurate cut line. In this case, you have to adjust the baseboard in the place, removing the excessive amount of material. Cutting the baseboard “in place”, it is worth installing it as tightly as possible to the wall surface, mating with floor. Directly on the product, we mark the fishing line for the trimmer, according to which the excessive amount of material should be cut off. In the process of cutting, the cutting tool is located in this way, the slope of the cutting tool was 45 degrees relative to the center of the corner of the profile.

How and how to fix it

The easiest, least labor and rather reliable way of fastening is the use of universal fast.drying adhesive compounds such as “liquid nails”. The disadvantages of this method include:

  • When dismantling (if necessary), the product will most likely be spoiled, so initially it goes into the category of “one.time”.
  • The inner surface of the filler must have a fairly wide flat strip to apply the required amount of glue.

If the supply of plastic skirting boards for the floor includes fasteners: metal (or polymer brackets) or special long profiles, then first they are fixed to the wall using dowels and screws. Further installation is quite simple. The product is neatly snap on already fixed devices. The advantages of this method include: the possibility of repeated dismantling (this is especially convenient when changing the wallpaper: the lower edge of the wall design can be made for the skirting board).

The presence of a cable channel with a decorative outer bar allows you to simply fasten such a filler to the wall through pre-drilled holes.

Docking of individual segments

When installing polymer fillets, they must be reliably and at the same time aesthetically jointed at the corners of the equipped room, and sometimes in the straight area, along the long wall. The best solution to the issue of how to join the plinth is the purchase of the required number of special products. Almost all manufacturers of goods for films of the floor covering produce these small, but very convenient and necessary “details” of various geometric shapes:

These devices are either simply snap at the ends of the profile using special antennae; either in the places of their installations, brackets are attached to the wall, and then the docking elements are fixed to them.

| Denial of responsibility | Contacts |RSS