How to distinguish a fake makita saw. Who makes Metabo?

How to distinguish the genuine power tool Makita from fake

It’s no secret that the best samples of goods are always risk of fake. You can even say that the appearance on the sales market for mass fakes of a particular product or brand steadily indicates the high quality and reliability of the execution of genuine samples of this product or manufacturer. Otherwise, what the meaning would be to fake them? This kind of “honorary” attention was not circumvented by the professional power tool of the Japanese concern Makita, the fakes of which are found more and more often. How to use the real quality of the product, which has established itself so highly that it has already been massively faked, but guaranteed to purchase for itself its original, and not a cheap, poor.Quality copy?

We will try to give a clear answer to this question in this article, to name the true signs of genuine quality for a professional tool from a real “Makita”. Having learned them, you will simply make such a distinction between a real high-quality Japanese tool made by this manufacturer for all the samples and requirements of the modern standard, from its fakes made by artisanal method without observing any even the most elementary standards of work in work.

Of course, the main feature of fake products for Makita can usually be considered their cost, which is set much lower than the cost of genuine goods from the Makita concern. After all, often the buyer is chasing precisely at the lowest price for the equipment he needs. However, when buying too cheap, which means most likely. A fake device, it will receive a product of not proper quality at all, but will become like a mean, which, as you know, always pays twice. Of course, a tool, which is a fake of professional, is unlikely to serve you for many years that you planned to get from it. Of course, soon it will have to be replaced with new equipment, and this will adversely affect your budget.

However, now there are such cynical scammers who will not mind selling you their fake tool at the price of a real Japanese. In order not to fall on their fishing rod, you need to know other signs of fakes, except for a low price: for example, the lack of an “makita” inscription on the handle or the wool glued up on the circular saw Makita 5704R. Not knowing about such important details of the decoration of a real Japanese tool, unfortunately, to detect its fake can be quite complicated. If it seems difficult for you to delve into this list of differences in a genuine and fake tool, then it will always help to protect you from purchasing fake goods by buying it in specialized centers for the sale of equipment Makita.

The most fake, which means that Makita’s 5704 Makita Disse Pil models were the most popular as possible. Our service centers immediately drew attention to the appearance of fake parquet saws of such a model. The nameplate was glued to them “upside down”. Then the more “neatly” fake parquet appeared, but they also found a clear external difference from the original. On the handle of a real disk saw there is always an inscription Makita, but there is no fake.

The “insides of the” fake parlocks ”betray themselves even brighter: on the fake anchor, rather uneven and rough balancing is noticeable in them, and protective filling (to prevent inter.Flip clicks on its winding) is imitated by low.Quality artisan“ varnish ”blue, which Makita in its products in its products Never used. The brush holders of the “left” saw 5704 differ from the true ones in that the fakes are very shiny, and fake carbon brushes do not have the laid marking “303”. Such numbers rely on brushes that are placed on the state for the true model of Makita. There are no inscriptions on the fake impeller in the saw 5704, but on the original impeller “Makita” they are always there.

The second type of instrument, which “earned” the mass fake with his quality in Makita, was the HR2450 manual peorator of the HR2450 model. Fortunately, he found vivid external differences in authenticity from fakes. On the original Japanese peorater of this popular model, a rubberized handle is placed, and in fakes in its place there is simply black.Quality low.Quality plastic. We have repeatedly observed cases when such handles burst in the unfortunate owners of fake peorators after the first ten minutes of work. There is no CE icon, which is required by all European standards, which once again confirms the “Asian” homeland of such fakes, on the nameplate of the “left” peorators. Their serial numbers are also “Asian” do not indulge in their diversity. As a rule, a stigma with a single number 0093508Y is used, and under a fake button on the housing of these peorators there is no instrument laid out of Makita. The pedorator, like the saw, has a fake “filling” itself with the head: the wires of the real switch rely on different colors, and on the fake they are all. White. The drummer of fake peorators also has its own “special” palette. Rubber rings here are green.Colored scammers, and in real Japanese Makita they are always black. Coal brushes of copy peorators, as on the “left” saws, differ from the real lack of any designations. After all, a fake manufacturer does not give a damn how you will replace them with wear with new ones, how you will select them without having rooms. The trunks of fake peorators are not even polished after milling.

The third instrument of Makita, for the well-deserved glory of which the manufacturers of fake junk encroached, became corner grinding machines for the 230th cut-off circle, usually. Models of the series 9069. And here it is realistic to identify a fake: there is always an inscription Makita on the “native” builders of the gearboxes, but there is no such thing on fakes. Inside the fake Bulgarians of this model, you will again find coal brushes without any regular numbers. Starting from 2005, in real Japanese grinder of this model, the housing of the bearing began to be assembled on screws with a hexagonal head, and they still “drive” production with screws under the usual “Philippi” standard on the fake. The spindle boot on fake angle grinders of the 9069 series is impudent, but in a real corner grinder of this model Makita makes it matte. The protective filling of the anchor winding is again imitated by artisanal varnish. Such a “fake” protection, of course, will not protect it from damage to flying dust and abrasive crumbs, will not prevent inter.Threaded circuits.

How to determine fake makita!

Often the best samples of goods are trying to sell for the original, but in fact they are fake. The fakes of professional power tools created by the Japanese concern Makita did not bypass. This power tool is sometimes difficult to separate from fake, especially when you do not know what exactly is worth paying attention to. But how not to make a mistake in your choice and purchase a truly original product that meets all standards and quality standards? We will talk about this in this article and tell us what the main signs of the genuine product of the power tool. These signs will help you make a competent choice that will definitely not disappoint.

Что по Metabo? Такида!

The main signs of fake products are Makita:

Everyone knows that the buyer most often tries to find and purchase cheap goods, and pays insufficient attention to the quality of the product, as a result, the purchase of a fake, which will soon demonstrate its low performance indicators. The price says a lot and if you do not want to buy low.Quality products, then pay attention to the price. Remember, a professional tool that is a fake will not be able to serve you for many years, it will not be reliable and not durable, as we would like.

But not everything is as simple as it might seem at first glance, because not in all cases the price indicates the quality of the product. Nowadays, a large number of cynical scammers are trying to sell a fake tool at a high price, thereby attracting the buyer and convincing him that the product is original and high.Quality. In fact, they deceive people and earn not bad money on their deception. In order not to become a victim of such deception, you need to know other signs of fake goods, except for its cost.

External features. You can easily determine the forged products by the eternal form. For example, the professional tool “Makita” must have the inscription “Makita”. If it is not, then do not believe that the tool is high.Quality. Often accomplices are so passionate about the creation of the tool that they simply forget about the most elementary things. The image of the manufacturer’s inscription.

In order not to accurately purchase a fake Makita tool, it is better to contact specialized Makita equipment sales centers.

Very often fake models of disk saws Makita series 5704. You can easily determine fake parquet saws of this model. The nameplate was not stuck on them correctly, namely “upside down”. Know that the handle of the original disk saw shows the inscription Makita, and it is absent on fake.

Material. Carefully read the material from which the product is made. The material often gives out the goods for fake. High.Quality goods should not have defects if you have found even the slightest, and this is already an imitation of low.Quality products.

They also very often try to give out a manual peorator of the HR2450 model as the original. But his bright external characteristics will also help determine the genuine or fake. A rubberized handle is placed on the original model, while a black plastic of low quality is located on a fake. Such handles burst very quickly after 10 minutes of the first work. There is often no mandatory CE icon on the nameplate of the “left” peorators, and all European standards require it.

On fake peorators, the drummer has green rings, while the genuine tool should have black. As for the trunks of peorators-fakes, they are not even polished after the milling of

The third instrument of production of Makita, which is often given for the original, is an angular grinding machine for the 230th cut-off circle, often these are models of the series 9069. And here again external signs on the face: lack of makita inscriptions on the fake, lack of full.Time numbers.

These important rules will help you distinguish the original professional tool of high quality from forged and not buy a shameless fake. Trust reliable manufacturers and always carefully choose the product. Do not rush to say goodbye to money, buying products that you are trying to beautifully advertise and deceive you. Trust first of all and buy only high.Quality production products Makita.

Often the best samples of goods are trying to sell for the original, but in fact they are fake. The fakes of professional power tools created by the Japanese concern Makita did not bypass. This power tool is sometimes difficult to separate from fake, especially when you do not know what exactly is worth paying attention to. But how not to make a mistake in your choice and purchase a truly original product that meets all standards and quality standards? We will talk about this in this article and tell us what the main signs of the genuine product of the Makita power tool. These signs will help you make a competent choice that will definitely not disappoint.

How to distinguish the “left” tool: Makita HR2450

Here on the forum, many people ask how to distinguish “left” tools, primarily well.Known brands. Bosch, Makita, and T.D. It may make sense to unite, collect this information in one branch and help those who are looking for it? It will probably be useful and information about the places of “habitat” of these products in different cities. In more detail, information on the warranty service of tools, legally produced, but illegally imported (here, probably for different countries there will be differences in the work of SC, or maybe not. “autopsy” will show). In short, the topic is wide: complement, develop, deepen who can.

To begin with. About the “left” Peach Makita HR2450. Immediately I note that this is not about instruments illegally imported into the country. Official representatives of famous brands are constantly scared by the refusal to serve such devices, although they are legally produced at their own factories. But the main thing is how to distinguish a fake (the difference is not in documents, but as a product), because there are quite a lot of them. It is possible that the same model can fake in different places (countries) and these fakes will differ among themselves. So, I hear from sellers about fakes Makita HR2450, produced in Poland, Turkey, Ukraine (Kharkov, Odessa. As without it), Russia, China (like for the domestic market), etc.D. Although in fact there cannot be so many places for manufacturing fake tools. Most likely sellers confuse the place where the goods were brought from, and the place where it is produced. The main thing is that the buyer himself can solve the question of what to buy. A cheaper “active model” or original, but more expensive. If the choice is conscious (saving when buying a fake), then there will be no particular disappointment, and complaints about the poor quality of brands. By the way, it would be interesting to hear here and reviews about the work of “Levaka”. It is possible that he also copes with the tasks and is completely satisfied with his owners.

So, according to Makita HR2450. The main information from official sources concerns mainly details that cannot be seen without disassembling the tool. The colors of the wires in the handle, the quality of the milling of the barrel, the anchor It is unlikely that sellers will allow this to do this in the store or in the bazaar. Therefore, first of all, about the external distinguishing features of “levis”.

  • Suitcase (box) for the instrument:
  • The color of the box at the “left” and “right” is practically no different. But, if you look at the latches (black), then the original letters of the Makita names are shiny, they are, as it were, polished. On fakes. Pressed letters matte and they do not shine. See. Photo 01.
  • On a paper sticker on a suitcase: firstly, the background around the photo of the penetrator at a fake is gray, dark, deaf; The original has almost white, very bright. Secondly, the text on the black background of the original is with a sufficient indent from the white rectangle, at the fake part of the letters “run” on the white rectangle or is very, very close to it. Thirdly, the corners of the white rectangle are much stronger in fake. Fourthly, on the box of the original Makita it is indicated that “Made in P.R.C.), that is, in China (as it is, because some buyers are looking for a Japanese pe). It is such an option that seems to be made in Japan and the point. On the box of fake Makita. See. Photo 02 and there are several numbers of fake Makita 2450, which are present on these Peans. So, I personally saw the number 199905 on three peorators with different sellers on the same day in Kyiv (therefore, I exclude the possibility of transferring, transition of one product to three sellers for various reasons. Sold, changed, presented, stole). Two, after a short, but friendly conversation, admitted that the goods are not original, but they give their guarantee for a year for it, and secondly, they have 15-20% cheaper. The third from the conversation about the origin of the goods went into a dumb protection. He has a real product, only from different countries was brought. After the question is why the number of his “real” goods coincides with the number of other peorators, the seller finally lost interest in the conversation and “went to his senses” for a long time. In the internet I met several other “constant numbers” of Makita 2450 (now I don’t remember where), maybe kind people will also indicate on this branch and the picture will be clarified. Fifthly, red color-the background of the inscription Makita (on the front side of the suitcase)-the original has more bright, juicy, and fakes are dirty, not bright. But with this feature it is more difficult. Depends on the time of day, lighting, purity (dustiness), etc.D. Therefore, I mention it just for the completeness of information. The sixth, inside the suitcase of a real makit, each part has its own number. Pen, latches, upper cover, lower part of the suitcase. See. Well, everything seems to be with a suitcase, although this should be enough to decide whether to continue the inspection of the “body” or not.
  • From below: number 199905 on fake. Drawn (printed). By the way, the year of release from all the left that I saw is 2004 (they have long been released, however). The original. The number is knocked out (pressed). See. Photo 06.
  • On the side of the Pea side: the fake simply indicates. Japan, the present. Made in P.R.C. Cm. Here, probably, there will be another problem. They will throw me that this one. “left”. The original should have a black label, etc.D cm. Officer. Website. But let this be clarified by each other who imports them.
  • Makita inscription on the left side of the Pea: the present under the inscription on the case has a corrugated text, it is well felt with a light touch. The fake has just a smooth, smooth surface under the text. See. Photo 08.
  • The rubberized handle of a real makita (it is softer and there is a number on it below!). The fake has a black plastic, it seems not tough, but not as soft as the real. Still plastic, not rubber-see. Photo 09.
  • An additional handle. The present on it has an inscription Makita, it does not have a fake. See. Photo 10.

How to distinguish the original Makita Peotor from a fake

Makita tools are quite popular in our country. Impeccable Japanese quality helped one master to carry out a reliable and beautiful repair.

However, a large number of fakes, of which it divorced in the domestic market, can put a reputation even the most experienced master to impact.

In addition, buying a fake, you deprive yourself of the opportunity:

  • No one issues warranty for fake;
  • The post.Warranty service of the peorator most often original spare parts are not suitable for fake tools;
  • Long and convenient use of the fake tool is always inferior to the originals in quality.
distinguish, fake, makita, makes

So that such problems do not arise in the future, we must carefully study the proposed object of purchase.


Makita logo on the case on the tool itself should be cast with the case, and not glued on top.

The same inscription should be on the rivets of the case. Only here the letters should be pressed into plastic.

The case with the tool should be equipped with a sticker indicating the Eac certification, marking and serial tool number.

The logo is also present on the removable pen pen.


The case of the original tool is made of plastic parts. The material is soft to the touch, qualitatively polished. Nowhere can you see sticking pieces of plastic or unprocessed edges. All parts are connected firmly, without cracks. Round elements of the case are made smoothly. Plastic of a fake peorator Makita HR 2470 is rough, some details are adjusted to each other fuzzy.

The gearbox housing, like the pen of a pedorator, has rubberized inserts. They are made of high.Quality and soft rubber. The rubber is much more rude and stronger in the fake.

On the plastic part of the case there is a voluminous inscription Makita, it merges with the case. The same inscription, but already squeezed out, should be on the reverse side on the rubber body of the gearbox of the original peorator.

Network cable

The original cable is made of soft and durable rubber. The plug body is made very firmly, the details do not hang out.

In a fake device, the cable is made of less flexible material. And the appearance of the fork is far from the original prototype.


On the bottom of the engine housing, a label with a serial number of the device and the date of its manufacture were glued.

The number has seven characters. The fake indicates eight digits.

In addition, on the original label in the lower right corner, the letter “y” is written that the peorator is produced specifically for the Russian market at the Chinese factory of the company. There can be no other letters there.

Please note that the font of the inscriptions is also different.

Information sticker

Such a sticker is located on the side of the device case. It contains information about the technical characteristics of the device, as well as about its place of production. Comparing the sticker on the original and fake pedorator, you can notice the following inconsistencies:

  • A different value of the current of 3.4 A is in the original versus 3.7 and at the fake;
  • The voltage in the original device has been declared 230-240 V, and in fake the standard 220V;
  • Lack of EAC icon on a fake sticker.

You can also notice that on the original sticker, all words are written in Russian. There is an inscription “Made in China” also in Russian.

On a fake sticker, all information is in English, and even incomprehensible numbers 30s/60s are indicated.


Fasten bolts for the original case are made under a straight slalit and under a cross screwdriver with number 2.

Not an original sample usually uses a cross.Shaped screw.

Now you know what you should pay attention to first when buying a Makita HR 2470 Peorator. Especially if you decide to do this not in the store, but a private person on an ad.

  • Pavel to record how to distinguish a fake of IMCO lighter
  • Natalia to record check the butch code online for authenticity
  • Oleg to record how to distinguish the original Bakhchisarai cognac
  • Alexey to record how to distinguish original Wrangler jeans from a fake
  • Gennady to record a review of Marlboro Duty Free how to distinguish a fake

Privacy OverView

Necessary Cooks are Absolutel Essential for the Website to Function Properly. Thus Cookies Ensure Basic Functionalites and Security Features of the Website, Anonymously.

Cookie Duration Description
cookielawinfo-checbox-ANALYTICS 11 months This cookie is set by gdpr cookie consent plugin. The cookie is used to store the user consent for the cookies in the Category “Analytics”.
Cookielawinfo-Checbox-Functional 11 months The cookie is set by gdpr cookie Consent to Record the User Consent for the Cookies in the Category “Functional”.
Cookielawinfo-checbox-fastrs 11 months This cookie is set by gdpr cookie consent plugin. The cookie is used to store the user consent for the cookies in the Category “Other.
Cookielawinfo-Checkbox-Necessary 11 months This cookie is set by gdpr cookie consent plugin. The cookies is used to store the user consent for the cookies in the Category “Necessary”.
Cookielawinfo-Checkbox-Performance 11 months This cookie is set by gdpr cookie consent plugin. The cookie is used to store the user consent for the cookies in the Category “Performance”.
Viewed_cookie_policy 11 months The cookie is set by the gdpr cookie consent plugin and is used to store whether or not user hars? IT does not Store Any Personal Data.

Fake? (UPD)

I watched Avito.Surprised by announcements for the sale of new Makita 9227 CB at less than 5000 fakes?

But I found its true price :: 44 hryvnias!Here

Комментарии и мнения владельцев 57

We also sell. Instructions from uki could not even fake.

I have the same. I took in China, in the city of Hunschyun I have been working for her for 2 years, no complaints about her. True, I polish her local areas (was lost, etc.). The car did not polish it entirely. It works without problems.

9227 does not look like that, compare with the photo on the off.Site

It is better to take an off representative or diller from off. The list on the site is! Fakes divorced like dirt! In this way, I took the STIHL saw from the off Diller

This has already figured it out. Now the question is different: this is the question. At the same price and such a frequency of use what to take: a copy of Makita or Interskol? Or for example Autech

Personally, I would risk a copy of Makita, provided that it is well collected and does not cause complaints when checking

This has already figured it out. Now the question is different: this is the question. At the same price and such a frequency of use what to take: a copy of Makita or Interskol? Or for example Autech

This has already figured it out. Now the question is different: this is the question. At the same price and such a frequency of use what to take: a copy of Makita or Interskol? Or for example Autech

Interskol can compete with the original Makita. Interskol lived at work from ten years old. Now NTOOLS (App) I have for two years, I have, my friends have Chinese Elprom and Titan for several years in harsh mode. If you do not get into marriage, then it will work for more than one year. The only Skill was covered in half a year, heated insanely.

Compare with the photo on the office.Site and you will understand everything!

Here is Su and! Here BL and Makita are already fuflat!Padonki is definitely!

Fake, familiar with those who carry this trash containers. Up to the tick, they will make. Makita, STIHL, motoblocks of famous brands, often carry huge containers to Belorash.

You can’t define from the photo, I uploaded a person as a peorator here, the photo is most likely original and the wrong device that is really sold, you need to look live, and of course, if the price is most likely to be the most likely for a fake

Something is not like externally, there is an original in the household, it looks better. For rare use, you can look for something “local”. Intersterskol said I mean, but I didn’t use it, I don’t know. There is a temporary understudy in the work of Vorskla, noisy but not killed.

Bosch or Makita? What details do you need to create BOSCHITA

Take it a couple of times a year and do not bother, I would understand if for professional use, and so do not care what to take, if only the speed regulator worked correctly

Makita peorators are produced in various countries. This can be determined on the nameplate mounted on the suitcase or tool case.If the letter A is on the nameplate, then the tool is produced in the USA. The letter D points to the German manufacturer (Dolmar factories), the letter E shows that the tool is made in Japan, the letter G is made in the UK.But there are also Chinese peorators produced in China and designated by the letters Y or to.Peorators Makita 2450, 2470, produced in Romania, are marked by the letter R.

You have a little bouton. And just the device will produce in China what is not hidden on the nameplate.

What are the signs that you have a fake in front of you

People who have already worked as an original Makita power tool will calculate the fake without any problems. Here are just ordinary users can easily run into low.Quality goods, you need to pay attention to the following points:

  • Price. The original Makita products cannot cost cheaply. If the price of the product is not decently low, then they offer a fake.
  • Manufacturer and marking. The company has plants in different countries. China, Japan, Romania, Great Britain. Also in the USA and Brazil, but from these countries products are not supplied to us. Regardless of the country of the manufacturer, the quality of the tool is not doubted, it is very high. Be sure to pay attention to the serial number. It should differ from such models.
  • Build quality. There should be no defects or other flaws on the case. In the manufacturing process, high.Quality raw materials are used, so there should be no unpleasant odors.

If you want to acquire a branded power tool Makita, contact our company. We are an official supplier, sell the tool in bulk and retail, and our are guaranteed to be likely.

7 (495) 215-02-99

Makita-Snab@ 84952150299@

From 9:00 to 18:00 (Mon-Fri) from 9:00 to 15:00 (SB)

How to distinguish an electric screwdriver makita original from a fake

Japanese electrical appliances Makita. One of the most popular market brands. This is, of course, a good thing, since the leadership shows the high quality of the tools. However, there is also the reverse side in the coins. With the growing popularity of Makita, the number of cheap Chinese fakes increases sharply. Therefore, today we will talk about how Distinguish Original Japanese manufacturer Makita Corporation from a fake tool.

The main differences of the fake and the original Makita

Makita tried to protect his power tools. Therefore, even with the help of visual inspection, fake products are easy Distinguish

However, this must be done with maximum thoroughness.

The case when the power tool is supplied by Makita;

First of all, you should look more carefully at the container. The original and the fake are almost the same in color, but otherwise they can be too bright. In addition, you need to carefully consider the inscription of the brand. In the original, the name “Makita”. Embossing and letters.

In a fake case, the name of the company is reflected as a low.Level sticker or manually glued. This is easy to check. They are simply torn off with a knife, fingernail. Therefore, buying any Makita tool, extremely carefully inspect the tool suitcase.

In addition, corps valves can give a fake. On original containers, they are a corporate name. “Makita”, and made of shine. Rivets on fake suitcases nameless and matte.

The gaps that are on the lid of the suitcase are also distinguished by the original and fake. Firstly, they can be completely absent or have the same shape. In the second case, gaps of different forms are made completely not high quality.

IMPORTANT! The backlash of the original is very high quality, without pollution. The fake cannot boast of this.

Close attention should be paid to the rear cover of the case. On the originals, the inscription of the brand “Makita” posted white letters. A fake suitcase does not contain this.

IMPORTANT! Opening the original, you will see that each part has its own production number.

When removing the tool from the case, you need to look at the sign with the device plate. This is a small table with the labeling of devices, the country of origin of Makita and other additional information. In fake, he literally “eats” his eyes that gives a fake tool.

The original has Makita inscriptions. Although fake is frank, she cuts her eyes bright red. Now by marking:

  • On real signs with signs, the serial number of the device is located next to the brand of the model. In fake locations of the production number below the table;
  • In these Makita devices, the table contains designations for use;
  • The Japanese manufacturer on original tools is indicated as the Makita Anji, Aichi Corporation, made in P.R.C. In fakes the last inscription is absent or has different letters. China, Malaysia.

IMPORTANT! Makita does not produce tools in the CIS. Original marking and countries where there are actually Makita factories:

As can be seen from the list, the original China affects otherwise.

Interest: now on the market you can find “gray” models of electrical appliances. They are original, but all the markings are on them. The main difference is that such Makita tools in the country were imported illegally. Even despite their authenticity, these models are not supported by the manufacturer. Therefore, there will be no warranty repair.

Now you need to carefully look at the inscription not in the table, but on the tool itself. As in the case, the original device wears the proprietary brand Makita with embossed capital.

distinguish, fake, makita, makes

Read Makita 042016 9a Lubricant for gearboxes Corner grinder

The color of the case of the device is greener for the original, and blue. For fake. Over, in the latter there is no inscription of the manufacturer on a black basis, the original. This is.

You should also pay attention to the quality of the plastic parts of the device. In the original, they are made of high.Quality, uniform shape, casting of fake components immediately catches the eye. The traces burst, poor.Quality region.

For example, in the original Makita swing hammers, additional devices have several inscriptions. One is made by a retreat, and the second. White. Fake do not contain letters at all.

IMPORTANT! There are such “Makita” models that have a sticker on the body. However, if you tear it off, then there will be a retreat of Makita under it.

Makita fake or original

The video tells how to distinguish peoratormakita original offering. Where to pay attention.

distinguish, fake, makita, makes

Many probably saw in one store two very similar products of the originally, which has a monotonous packaging all external visible signs.

Only now the cost of these products is sharply different. That exists, that there is one product of branded and one of the same product fake. Only now the company complies with our client remains norms for the quality of production of the product, and the fake company tries to focus only on the external signs of the product, so that it is very similar to the original, then judge the quality of this product yourself.From the fakes made under the Makita brand, I would like to mention some names, these are Makita products

The main difference between the fake and the original is not a secret value. The price of fake Makita products is lower than that of the original, and the client must “fall on this fishing rod” at first, there are no teeth, for which it is simple if there are no differences? However, how annoying it would not sound, it is not at all like. A poorly manufactured product you have purchased at the least cost will be very soon disappointed, and the equipment will quickly fail, you will have to take new products for you, and in the end you pay you as simple as it is simple than if you first purchased a unique product from the company- manufacturer. Therefore, think for yourself, you should save as.

Also on some fake goods under Makita, special marking labels are incorrectly attached. Initially, the client will not even direct attention to the correct marking, but for example, in the product Makita 5704r

First, consider the case

  • The real box has an even structure. A plastic container has no burrs or influx. The color is even. Case shade is dark gray, with a light blue tint or dark green. A fake box is brighter, although similar in shade. On the original case, the letters “Makita” are made by embossing, and not just drawn. Often on a fake container, the name of the brand has the form of a sticker. It is easily removed with a knife or other sharp object.
  • Zapels. On the corporate case, the container latches are even, without influx and plastic burrs. On the back there is an inscription “Makita” in the form of embossing. Over, the name is even and glossy, and the latch itself is matte.
  • Gaps on the box. The original case has even gaps around the entire perimeter. Either they are not at all. The cover has practically no backlash. It opens easily and closes.
  • Schildik of the device. Pay attention to the labeling of the tool. In the original “Makita” it is made in a calm orange color, and does not hit the eyes. Fake nameplate is very bright. In a thrown red color. Another difference is serial number. In this tool, it is indicated next to the model, in the upper part of the table. At the fake. In the lower left corner. Pay attention to certification. There is a mark “Ce” on this tool. The last important element on the nameplate is the country manufacturer. The original should have an inscription: Makita Corporation Anji, Aichi, Made in P.R.C.
  • Tool case. The real case is painted in a blue or turquoise shade. The fake burns to the green tone. The inscription “Makita” in the original is also performed by embossing. True, there is a reservation here. On some models of the brand on the case there is a sticker with the name, but under it there is always a duplicate inscription in the form of squeezed letters. The real tool is nice to hold in your hands. There is no overwhelming, influx or other plastic casting defects on the case.
  • Handle or other elements of equipment. On such elements, the name “makita” is also presented by extrusion method. Sometimes the letters are painted white. For example, on an additional penis. If we are talking about the main handle, then it should be with the rubberized part from the back. In fake it is painted black.

The easiest way not to run into a fake tool is to buy equipment from an official dealer or distributor. The full list of retail points of sales can be viewed on the official page of the site “Makita” in Russia. If you live in a small city, it is better to take a tool in an online store. And never buy a “real” Makita from unknown persons in parking lots, near large shopping centers at a similar price. With a probability of 99%, you will buy a fake.

Makita fakes

Dear customers, we want to inform you that fake Makita tools have appeared on the Russian market that have nothing to do with the products of our company.

Mi we want to explain several distinctive features of these tools by which you can recognize a fake. On the current day we have information about three models is 5704R, HR2450 and 9069.

Here is a fake circular saw 5704r
The original case is on the left, and fake on the right, on a fake saw, the nameplate is glued upside down.
There is a Makita inscription on the original handle, but it does not have a fake.
On the right on the fake anchor is a very rough and not even balancing, there is also a pouring anchor with a blue varnish, which Makita never had. Brushing holders also have a difference on fake them, they are glossy, t.E. Shiny and slightly different shape. There is no designation 303 on fake brushes, such brushes are placed on this model.
There are no inscriptions on the fake impeller, but on the original there is.
In this photo, a fake peorator HR 2450. Visually, everything is the same, but you can immediately pay attention to a non.Standard cable, we never had such a fork with an additional elastic band. On the original oorater, a rubberized handle, and on a fake, is simply black plastic black.
There is no CE icon on the nameplate, which also does not comply with European standards.
On the nameplate under the button there is no year manufacturing tool. We have two such peorators and all of the same serial number 0093508 Y
The wires of the switch should be of different colors, and on the fake they are white. There are no designations on coal brushes.
The barrel is not even polished after milling.
The anchor is also fake, we never had such a balancing.
The drummer has a rubber ring of green color, while we have all black rings. With a more detailed examination, you can notice that all the nodes in this fake are copied very roughly and do not correspond to our quality.

Recently, a fake Makita tool assembled in Russia appeared in the markets! We inform: Makita in Russia is not going!

ATTENTION. These fakes will not be served in the warranty and post.Warranty service centers of Makita, while each authorized service center of Makita has the right to submit the injured party in writing that this product is a fake for further proceeding with the supplier.

| Denial of responsibility | Contacts |RSS