How to get a mower. Possible difficulties in starting and what to do with them:

Playing the motor motorcycles. Features of the game of the lawn mower

It should be noted that a gasoline braid for grass is controlled very simply. It is enough to see how other users use this unit to start using it fully. The performance of the main technical functions is intuitive and does not require any difficulties in practice. Correctly driving a gasoline trimmer for grass is also not difficult. Over, there is almost no difference between devices of household and professional categories.

The key difference is the type of motor. On technology for professionals, it is more powerful and gives more revolutions. A two.Stroke engine is more often used in household models. Four.Stroke units are more reliable and give out a greater effort, so they are suitable for special conditions, difficult and overgrown sites.

In addition, we must consider whether there is a cutting device in the supply set.

Background

The reason for the failure of a trimmer for the grass may be:

  • Tank overflow;
  • Excess fuel in engines with manual supercharger;
  • Wear in the engine of valves, cylinders, nozzles, fist pushers and other moving parts;
  • Gasoline and / or oil end in tanks;
  • The spark plugs failed;
  • Clogged filters for fuel or air;
  • Incorrectly spelled out or burned valves in the engine.

The main breakdown of the lawn mower

Despite the large selection of manufacturers and the variety of models, the reasons why the Makita, Honda, Husqvarna law mower is not started, they are the same for everyone.

The main reasons why the gasoline lawn mower will not start or start, but immediately stalls, there may be problems with ignition, carburetor, filters.

If the flooded combustible and fuel mixture is high.Quality and in the right amount, the air damper is closed, the lawn mower starts and immediately stalls the reason may lie in the following problems:

mower, possible, difficulties, starting
  • Faulty or flooded light of the ignition. In this case, you should twist the candle, dry it well and cleaned thoroughly with a file or a file. Excess fuel drains, the candle hole is dried. A gap of 1 mm is set, and the candle is again screwed.

Important! It takes at least half an hour to dry the channel.

  • Dry threaded connection. It should be greased with gasoline so that the spark can flare up.
  • Lack of sparks from a candle. In this situation, the contact of the candle and the high.Voltage wire is first checked. If the contact is normal, and the lawn mower issues cotton and stalls, the ignition is a problem, and without a service center you can not do.
mower, possible, difficulties, starting

Damage these are frequent reasons why the Husqvarna lawn mower is not started.

Frequent reasons for the breakdown of garden equipment, including why the Honda lawn mower is not started, are problems with an air and fuel filter:

  • Clotted air filter. If the first possible causes have not been confirmed, and the lawn mower still stalls, you can extract an air filter and try to start the device without it. If the stalled engine starts, the reason is in it. The filter should be cleaned or replaced with a new.
  • Polluted fuel filter. Another possible diagnostic option. The filter element is examined and, if necessary, replaced.

Important! Working a lawn mower without a filter element is extremely not recommended.

The following breakdowns are more serious and without certain skills it will not be easy to cope with them. There are problems in the malfunctions of the carburetor:

  • Placers of nozzles and channels. They are washed with special liquids, blown with a stream of air from the carburetor.
  • Wondered gasket. Its replacement for a new gasket is carried out.
  • Damage to tightness. Diagnosis is carried out using a tonometer. If the pressure is stable, everything is fine, it falls. You need to find and replace the damaged element.

Another breakdown option is the disguise of the piston group. Worn or damaged pistons should be replaced.

Lawn mowed gasoline knight BG-4900

We refuel the fuel tank

When the gas is poured and the rest of the fuel mixture is available, the most crucial moment of the first launch of a gasoline braid for grass comes. In order for the first launch of the mower to pass without excesses, you must correctly adhere to the instructions for the launch.

  • We have a motorcycle on a flat surface that we are going to start.
  • The air damper control lever should be switched to the mode (position) closed.
  • We make several stroke strokes so that gasoline fuel enters the carburetor.
  • Turn on the ignition button.
  • Try to smoothly stretch the launch cord until you feel slight resistance.
  • After which you can carry out several sharp jerks of 3.4 and your gas station should start.
  • After that, you can completely open the air damper.

Step.By.Step instructions for launch

In order to easily start a lawn mower, it is necessary to familiarize yourself with step.By.Step instructions in more detail, but at the same time you also need to take into account the rules for refueling the device with fuel, as well as many other important nuances.

Only gasoline models need a refueling before starting, the engine of which will work incorrectly without correctly selected fuel or will not at all start. Therefore, having studied in more detail the technical characteristics of your device, you must also familiarize yourself with information about the finished fuel or with the preparation of a special mixture with your own hands.

In the latter case, it is necessary to observe the proportions that are specially designed for the correct functioning of the mechanism.

Sometimes synthetic oils are used for this. Such types of fuel mixtures have a lower cost, but practically do not differ in their quality characteristics. 5 liters of gasoline must be used per 100 grams of synthetic oil, so the mixture will have proportions. 1: 50.

Higher cost have mixtures with mineral oils, since they are considered more natural and environmentally friendly, but in terms of technical characteristics they only slightly exceed synthetic options. Proportions when using such materials will be 1: 35, that is, 3.5 liters of gasoline must be used per 100 grams of oil.

There are also options for gasoline lawn mowers, where the fuel tank is located separately from the crankcase for the oil, so there is no need to prepare the mixture.

But regardless of the model and type of fuel tank, refueling should be done the same way-not completely pouring fuel, but leaving 3-4 centimeters to the edge of the tank.

Launch

Depending on the model of the lawn mower, the launch will be made in different ways. Therefore, it is necessary to take this into account and, comparing with individual technical characteristics, proceed to connect the device and engine establishment.

Ryobi 40v Lawn Mower Won’t Start. What to Check and Why

And if with a manual model working according to the principle of ordinary braids for grass, everything is quite simple, then when starting a gasoline model, some difficulties may arise.

A gasoline lawn mower can be opened in two ways. With an unheated or with a heated engine.

Before you start an uninterrupted engine, you need to take care of turning off the ignition and transmission system, as well as scroll through the starting lever or starter motor shaft. After that, you can start starting, acting as follows:

  • First you need to turn on the ignition;
  • Then it is necessary to close the air damper;
  • After that, you can safely start starting the engine.

After starting, you need to install an idling on the device, using the gas lever. Then, using the same lever, you need to transfer the device to work at low speeds, thereby giving the engine the ability to warm up. After that, you can safely begin operation of the lawn mower at full power. It is worth noting that the launch of a device with an unheated engine is permissible, but further operation in this state is undesirable, since this will negatively affect the general state and the functioning of the lawn mower.

Launching a lawn mower with a warmed engine is much easier, since this process does not require preliminary preparation. The actions must be performed in the following sequence:

  • The control lever must be transferred to the fuel supply mode at the maximum level;
  • Then you need to start the engine;
  • After that, you can choose the necessary speed and start work.

These recommendations are suitable for any models, including manual lawn mowers that work on the principle of ordinary braids for grass.

How to launch after winter?

It may not be easy to start a lawn mower after the winter period, since most often devices of this type are stored in sheds where heating is not provided, which means that they are exposed to harsh winter climate, and sometimes sharp temperature changes. Therefore, it is necessary to approach this process wisely and take into account all the important nuances.

Advantages of gasoline grass haircuts

Which lawn mower is better. Gasoline or electric?

Comparing the characteristics of the electric cosep, motorcycles and gasoline unit, you can notice that the latter has the following advantages:

  • The costs of the operation of equipment are significantly reduced due to the use of gasoline AI-92 and AI-95 in the process of engine operation;
  • High degree of mobility, maneuverability of gasoline lawn mowers;
  • For a long time of work;
  • The function of adjusting the height of the cutting tool and the level of mowing of the grass;
  • High performance indicators;
  • Increased environmental friendliness;
  • Compactness and ease of operation;
  • The tank capacity can reach 70 liters;
  • Unpretentious service;
  • Small gasoline consumption;
  • High reliability;
  • On the entire area of ​​the lawn, the same height of the grass is maintained, you can get a perfectly even lawn;
  • Complete autonomy. Independence from external power supply;
  • Processes uneven areas;
  • When fuel combustion, exhaust gases are not thrown into the atmosphere;
  • Support for the function of mulching, collecting, and waste disposal;
  • Mulching unit works without unnecessary noise.

Step.By.Step instructions for launch

In order to easily start a lawn mower, it is necessary to familiarize yourself with step.By.Step instructions in more detail, but at the same time you also need to take into account the rules for refueling the device with fuel, as well as many other important nuances.

Only gasoline models need a refueling before starting, the engine of which will work incorrectly without correctly selected fuel or will not at all start. Therefore, having studied in more detail the technical characteristics of your device, you must also familiarize yourself with information about the finished fuel or with the preparation of a special mixture with your own hands.

In the latter case, it is necessary to observe the proportions that are specially designed for the correct functioning of the mechanism.

Sometimes synthetic oils are used for this. Such types of fuel mixtures have a lower cost, but practically do not differ in their quality characteristics. 5 liters of gasoline must be used per 100 grams of synthetic oil, so the mixture will have proportions. 1: 50.

Higher cost have mixtures with mineral oils, since they are considered more natural and environmentally friendly, but in terms of technical characteristics they only slightly exceed synthetic options. Proportions when using such materials will be 1: 35, that is, 3.5 liters of gasoline must be used per 100 grams of oil.

There are also options for gasoline lawn mowers, where the fuel tank is located separately from the crankcase for the oil, so there is no need to prepare the mixture.

But regardless of the model and type of fuel tank, refueling should be done the same way-not completely pouring fuel, but leaving 3-4 centimeters to the edge of the tank.

Launch

Depending on the model of the lawn mower, the launch will be made in different ways. Therefore, it is necessary to take this into account and, comparing with individual technical characteristics, proceed to connect the device and engine establishment.

And if with a manual model working according to the principle of ordinary braids for grass, everything is quite simple, then when starting a gasoline model, some difficulties may arise.

A gasoline lawn mower can be opened in two ways. With an unheated or with a heated engine.

Before you start an uninterrupted engine, you need to take care of turning off the ignition and transmission system, as well as scroll through the starting lever or starter motor shaft. After that, you can start starting, acting as follows:

  • First you need to turn on the ignition;
  • Then it is necessary to close the air damper;
  • After that, you can safely start starting the engine.

After starting, you need to install an idling on the device, using the gas lever. Then, using the same lever, you need to transfer the device to work at low speeds, thereby giving the engine the ability to warm up. After that, you can safely begin operation of the lawn mower at full power. It is worth noting that the launch of a device with an unheated engine is permissible, but further operation in this state is undesirable, since this will negatively affect the general state and the functioning of the lawn mower.

Launching a lawn mower with a warmed engine is much easier, since this process does not require preliminary preparation. The actions must be performed in the following sequence:

  • The control lever must be transferred to the fuel supply mode at the maximum level;
  • Then you need to start the engine;
  • After that, you can choose the necessary speed and start work.

These recommendations are suitable for any models, including manual lawn mowers that work on the principle of ordinary braids for grass.

How to launch after winter?

It may not be easy to start a lawn mower after the winter period, since most often devices of this type are stored in sheds where heating is not provided, which means that they are exposed to harsh winter climate, and sometimes sharp temperature changes. Therefore, it is necessary to approach this process wisely and take into account all the important nuances.

For example, the first thing after winter downtime is necessary to check the fuel tank of the device and make sure that it is clean and there is no old fuel. If the tank is not empty, then it should be cleaned before the new dressing. This must be done because adding new fuel to the old, surviving a winter simple, is unsafe for the functioning of the device. Old fuel, under the influence of winter temperature regime, can slightly change its composition, which when mixed with a more fresh composition or even with simple operation can lead to faults.

Further, for safer functioning, it should be acted on the principle of turning on the device with a warrant. So you can gently prepare the lawn mower for work.

If everything is in order with electrical equipment, then we check the carburetor.

Vacuum carburetors are put on trimmers for grass. When disassembling it, cleaning or washing, you need to be extremely careful. In no case do not disassemble the lower part of the carburetor where the primer is located. Air filter (it is visible if you remove the protective casing from the carburetor) should be washed with detergents. Best. For washing dishes. After drying, we put it back. Rinse the carburetor with clean gasoline and blow out all the holes by the pump. We also wash the filter of the gas pipeline, then we dry everything and collect everything. Usually, after all manipulations, the trimmer for the grass begins to work.

Thin cable instead of fishing line, whether it is worth placing it on a motorcycle?

This thought comes to mind almost everyone who had to pump out 10 acres overgrown with high grass. At first glance, the idea seems good. The cable is stronger than the fishing line, not so wear out. However, not all so simple.

How to wind a fishing line for a trim for a lawn mower

Winding a new cord on a reel. A rather easy process. For work, a skein of a new fishing line of the desired diameter and shape, a knife for cutting and protective gloves will come in handy for you. The following is the scheme for replacing the fishing line with a reel with 2 antennae, as this is the most common version.

mower, possible, difficulties, starting

Lawn mower fuel pump check

  • Cut the fishing line for a trimmer 2-4 m long (the length of the segment depends on the thickness of the cord and the tips of the manufacturer). Do not use the cord of the larger length, since it will rotate and stretch worse when running.
  • Remove the trimmer head from mounting (each model has a different method of fastening-special latches or a barashka nut) and disassemble it. Gently spread all the details nearby, losing nothing.
  • Wind a fishing line for a trimmer to a reel. There are 2 types of coils: with a dividing side and without it.

Sprout

  • Fold the fishing line for the trimmer in half and put on the bending place on a special groove in the coil. If it is not, simply cut the cord into 2 parts along the fold line and fix the ends in the holders.
  • Pass the tips in special gutters on each part of the coil.
  • Start wrapping the remaining length of the cord in one direction.
  • Leave 20 cm at the ends and place them in opposite directions, stretching into special holes.
  • Cord the cord of the desired length in half.
  • Fix the tips in a coil in special mounts or drive into the holes.
  • On the bobbin indicates the direction of winding, in which direction you need to wind the cord. Wind up, not allowing segments to cross the coil.
  • Dilute the ends on the opposite sides and insert into special slots. The diameter must match.

Important! Buy a corporate cord, which is recommended for your lawn mowing model. It is stronger than cheap analogues and will serve longer. Also pay attention to the diameter of the holes in the coils with a dividing side to choose a fishing line for a trimmer of a suitable section. Do not wrap the fishing line for the trimmer tightly, provide it with free move during work.

To wind a fishing line for a trimmer to a coil with 1 cutting end, you should not fold the cord, and for mowing heads with 4 antennae, you should prepare 4 pieces of fishing line. Winding scheme is the same as described above.

| Denial of responsibility | Contacts |RSS