How to grind a tree with a drill. Features of work

Grinding and polishing wood

One of the most common materials can be called a tree. It is used in the manufacture of various products. High degree of processing allows you to get products of various shapes and quality. One of the most common operations can be called grinding. It provides for the removal of a thin surface layer when using special tools and equipment. Consider the features of the process of the process in more detail.

Grinding wooden surfaces is a complex technological process that provides for the use of special consumables and tools. Among the features, we note the following points:

  • Grinding the tree provides for a thorough preparation of the surface for the operation under consideration. The workpiece should have the exact dimensions taking into account the allowance.
  • Grinding provides for the use of an abrasive with a different indicator of grainism. A common issue can be called how to polish a complex product consisting of several planes.
  • When working, the workpiece should be securely fixed. Otherwise, the quality of processing is significantly reduced.

The tree is considered easily processed material. That is why grinding problems, as a rule, do not arise.

Where the grinding nozzles are used

Grinding nozzles for a drill significantly increase the scope of the device. With such details, the device is able to replace a full.Fledged grinding machine. This allows you to refuse to keep a large set of different power tools at home and limit yourself to a number of components.

Nozzles are used for a large set of metal, wood and even concrete. They help clean the surface of rust, old varnish or paint. Suitable for grinding coatings after primer. If necessary, you can use materials for polishing surfaces.

The work that is performed using grinding devices includes:

  • Surface cleaning for subsequent processing or painting;
  • Getting rid of rust;
  • Polishing surfaces to shine;
  • Boring holes in the metal, giving the necessary shape;
  • Detecting the details of burrs, unnecessary ledges and growths.

These are only the main tasks that are solved with the help of such a tool. In addition to them, there may also be different works, which need a similar surface processing type.

To install nozzles in a drill and a scorch, nozzles are used, which are securely attached in the cartridge. But it is worth noting that an electric screwdriver will not allow you to work comfortably with nozzles, as it operates at low speeds.

For the convenience of some types of work, the drill is fixed in a fixed tripod. In this case, the tool is used as a full.Fledged grinding machine.

Types of grinding work

The universality of the drill and the variety of nozzles allow it to be used for:

  • Polishing metal, wooden products, glass, paintwork;
  • Stripping of metal from corrosion, old paint (preparation of the base);
  • Fluids of metal, wooden products, glass edges;
  • Stripping a man, a burrs, influxes on metal, wood, concrete.

This is just a small list of works for which you can use an electric drill and specialized components.

The disadvantages of such nozzles

There is a small spoon of tar in grinding wood with a drill, or rather, 2 tablespoons:

  • When working at low speeds, the processing efficiency is also low, and at high speeds there is a high probability of spoiling the workpiece, so you need to clearly verify the rotation of the drill;
  • When using the petal nozzle, with non.Compliance with caution, it is possible to appear on the surface of the wood of the cross.Line lines, which are then hard to be removed, and if they are left, they will appear through the varnish.
See also  What is the difference between an impact drill and a regular drill?

Therefore, it is better to carry out the main amount of work with nozzles, and to perfectly bring it already manually. Still, the tree loves manual labor-this will even confirm Pinocchio.

If you try, you can make a home.Made nozzle, but it will be a sufficiently troublesome process. In addition, it is unlikely that it is possible to make a petal nozzle with your own hands, and spending time is stupid. It costs inexpensively, so the purchase of a branded nozzle will not hit too much a Therefore, polishing a tree with a drill, if it should be performed, then only with the help of a high.Quality and proven tool.

Types of nozzles

There are several types of nozzles for the drill, each of which is used for clearly defined work. The size, shape and characteristics of these components differ. Take for consideration the main types of grinding nozzles.

grind, tree, drill, features

Disk

A very popular species, which is a design of a certain amount of grinding material located around the circle. The material is used different. To process solid metal surfaces, a thick steel wire is used. Final grinding with a drill and polishing is carried out using polymers.

Disk nozzles are capable of working not only the surface, but also by the edge, which allows you to polish narrow recesses. Widely used to process complex details. In their design, such nozzles are slightly reminiscent of cup. But the difference is that all the bristles are based on a round disk in the middle.

The use of such tools requires certain skills from the master, so before performing responsible work it is better to practice properly.

Cup

Nozzle for grinding drill, consisting of a base resembling a cup, and many fibers of grinding material. Used to remove paint or varnish from the surface of the part. For wood, it is also used as a skin. There are many different types of cup nozzles intended for different works. You can find a component for any task.

After using such a skin, it is recommended to process with plate nozzles. This will help to highlight the structure of the tree on which the varnish coating is easily applied.

grind, tree, drill, features

Petal

A separate type, which is many strips of material fixed on the axis of rotation. Sometimes such models are called fan. Each petal is made of abrasive material, which helps to have the desired effect on the processing subject.

Very often, ordinary sandpaper is used as a material. This helps to reduce the cost of the product and make it as effective as possible. Suitable for processing wooden products of various shapes.

Drum

Plugs of grinding paper are fixed on a durable cylinder. This cylinder can be made of rubber or other material. So that the paper does not move from the drum, special holding mechanisms are used.

In order for the paper to fit the drum tightly, it is artificially deformed, forcing it to increase in size. The paper is pulled and reliably attached to the nozzle. Such models are used to process parts of wood, glass or metal. Allow you to polish the surface to a mirror shine. It is convenient to use for cleaning holes in details.

See also  At what speed to drill an electric screwdriver. Tips when working with a drill with an electric screwdriver

Young M.A “Off the Yak” (Official Music Video)

Plaque

The model is composed of two components: a round disc of plastic and a sheet of abrasive material. This sheet is attached by sticky material. An important feature of such a nozzle is the presence of a damper that will smooth out the irregularities of the material and allow you to evenly clean the surface of the part. If this damper was not there, the processing would be very complicated. It is difficult to accurately guess the effort with which you need to clean the surface. High risks of violation of the integrity of the part and damage are. Especially, this applies to work on weight.

Any elastic material is inserted as a damper. It seems cheap and comfortable a simple foam.

Working with devices requires a high level of training of the master. It may be difficult for a beginner to observe a straight angle. Sometimes you can find models with a special mechanism that allows you to adjust the angle of inclination. It is used for both draft and final processing. Everything will depend on the type of abrasive used.

Soft

Such components are usually used to work with sensitive surfaces that are easy to scratch. Are also used to polish mirror surfaces or varnish coatings. They are usually made from felt, polymers, foams or any woven materials. Different forms are found in form. It all depends on the processed part and its features.

Abrasive

End nozzles that can be used to bicker holes or give a part of the necessary shape. Have a rather greater stiffness that allows you to remove entire layers of excess material. All parts are processed perpendicular, in compliance with the right angle. This can cause difficulties in inexperienced masters.

The heads are of different shapes: ball, cone, cylinder and much more. Stones can be used for the manufacture of such heads. The model is widely used for sharpening tools.

Manual way to skin a wooden surface

In the absence of a special tool, you can grind with manual surface processing. This requires only a special bar, as well as the skins of the granularity suitable for a specific type of work. Among the features of this process, we note the following points:

  • The design has a special mounting element, due to which the fastening of sandpaper is ensured.
  • A rough skin can be polished a product with high roughness. This is due to the fact that the shallow wear out quickly. Grinding should be carried out in several stages, due to which a high smooth indicator is achieved.
  • Manual grinding is often carried out when the product has a small area.
  • When using a bar of various sizes and shapes, you can process complex products.

Manual grater for grinding wood manual method has been used for a sufficiently long period. It should be borne in mind that you can achieve a requirement only if there is a lot of work experience.

How to grind a tree correctly?

Grinding technique. The wood is polished with active movements along the fibers or at a small angle, but without excessive pressure on the block. The movements should be as easy as possible, on the second or third passage with a fine-grained skin almost without pressure.

Surface preparation for finishing. Preparing a tree for applying a finishing coating (varnish, oils, stains, polyurethane, etc.), start working as an abrasive P120 or P150 (depending on the nature of the irregularities). After that, proceed to the granularity P180 and end the work as an abrasive P240.

See also  How to remove holes in the wall from the drill

Intermediate grinding of coatings. With a layer of laying the finishing coating, an intermediate grinding of each layer with a fine.Grained skin p280 is performed. For finish polishing, use P400 skin. To remove the slightest roughness of glossy finishes, an abrasive of the granularity of P600 is used.

The exactingness of finishing coatings for grinding. Matte types of coatings are not so demanding on the quality of stumbering as glossy. At the same time, a dark stain will flaunt all the flaws of unscrupulous grinding.

Advantages and disadvantages of nozzles

Undeniable advantages of grinding nozzles:

  • Small price.
  • Options for any work.
  • Fast replacement of a worn nozzle with a new.
  • Universality on the use of the drive. They can be installed on a drill, an electric screwdriver, a pen and any other suitable power tool.
  • The possibility of processing inaccessible places for a special tool.

How to Remove a Tree Stump with a Wedge

However, despite the significant advantages of grinding nozzles, they also have disadvantages:

  • The need to hold the tool equipped with a grinding nozzle, hands.
  • When working with some types of nozzles, significant experience is needed.
  • The processing quality will be slightly lower than after using a special tool.
grind, tree, drill, features

The advantages of nozzles clearly surpass their shortcomings, otherwise they would not have received such widespread distribution. Any nozzle is an object consisting of a metal rod (shank) and an abrasive or grinding material fixed on it. Depending on the type, the processing material can be applied to the shank adhesive and then, with full wear, the tool is completely released. Or grinding material can be fixed on the shank using fasteners, and then only the material itself is replaced.

The disadvantages of such nozzles

There is a small spoon of tar in grinding wood with a drill, or rather, 2 tablespoons:

  • When working at low speeds, the processing efficiency is also low, and at high speeds there is a high probability of spoiling the workpiece, so you need to clearly verify the rotation of the drill;
  • When using the petal nozzle, with non.Compliance with caution, it is possible to appear on the surface of the wood of the cross.Line lines, which are then hard to be removed, and if they are left, they will appear through the varnish.

Therefore, it is better to carry out the main amount of work with nozzles, and to perfectly bring it already manually. Still, the tree loves manual labor-this will even confirm Pinocchio.

If you try, you can make a home.Made nozzle, but it will be a sufficiently troublesome process. In addition, it is unlikely that it is possible to make a petal nozzle with your own hands, and spending time is stupid. It costs inexpensively, so the purchase of a branded nozzle will not hit too much a Therefore, polishing a tree with a drill, if it should be performed, then only with the help of a high.Quality and proven tool.

| Denial of responsibility | Contacts |RSS