How to improve a trimmer for grass for grass. Waited for problems with the spark plug

What can be done from a trimmer for grass

What can be done from a trimmer for grass yourself to facilitate everyday work or for entertainment? This question arises if there is an old unnecessary device, or a equipment is required for operation, which, with factory manufacture, costs much more than a gasoline or electric braid for grass. In practice, many options have been implemented by the craftsmen. The main of them are a motorcycle bike, a snowball player, an ice ax, devices for the cultivation of a land plot and the mowing of lawns, saw, snowmobile equipment. To bring the idea to life, in each case you will need to apply a certain set of tools and additional materials.

If there is a cottage or just a land plot, then the cultivator will help facilitate soil processing. Traditionally, a chopper is used for these purposes, but working with it takes a lot of time and effort. The use of the cultivator will reduce labor costs, and the whole process will take a smaller time period. Factory.Made equipment is expensive, therefore, with limited funds, the question arises about the independent assembly of the cultivator. For this, both gasoline trimmers for grass and electric cos are suitable for this.

improve, trimmer, grass

To create a simple sample of technology, you should stock up on such tools and materials:

  • Corner grinder with a set of disks (suitable diameter. 125 mm) for metal;
  • Drill with drills of various diameters;
  • Welding apparatus;
  • Electrodes;
  • An electrician or a hacksaw for metal;
  • An emery machine with two abrasive circles of different granularity;
  • Functioning gasoline trimmer;
  • Forks;
  • Pipe made of steel suitable in diameter for the shaft of motorcycles;
  • Manual tools: keys, hammer, pliers, core, roulette and marker;
  • A sheet of metal with a thickness of 3 to 5 mm and a minimum of 1010 cm.

The manufacturing process begins with the working part. For this purpose, the curved rods of garden foriles will serve. Their recommended length is from 10 to 15 cm. This is enough to carry out loosening the soil.

The working nozzle is made in the following sequence:

  • The teeth of the forks are flattened to a width of 1 cm;
  • On the sandpaper, using a circle with a small abrasive, cutting cutters;
  • Using an electrician, a circle with a diameter of 10 cm is cut out of the metal;
  • Process it on the emery machine until it reaches an almost perfect form;
  • At equal intervals, prepared mills are welded to the metal circle (recommended quantity. 3).

With more than 3 pieces, the number of mills, the load on the equipment increases greatly.

The recommended power of the gasoline engine should be two horsepower (about 1.5 kW) or more.

At the next stage, it is necessary to attach the cutter for weeding for a trimmer for grass. The process is greatly simplified in the presence of a reverse thread located at the end of the shaft of the motorcycles, on which the manufactured working part is simply wound. To do this, a pipe with a nut is pre.Welded to the cutter.

In the presence of locksmith experience and welder skills, redoing a trimmer for grass in a cultivator is quite simple. Financial costs at the same time insignificant. If the work is used in an electric hood, then you will need to think about the extension cord so that it takes out throughout the processed area.

How to use a trimmer for grass, if the grass is very high

If, upon arrival at the cottage, you found that the grass is very high, it will probably not be possible to perform its mowing with one passage with one passage. If you try to mow it right under the root, then it will simply be wrapped in a coil. And as a result it will block it. That is, a trimmer for grass simply cannot work. Over, it can overheat and fail.

If the grass is too high, then the mowing must be made in several visits. First, you need to cut the top of the plants. And only then mow them under the root.

But in any case, in the case of winding, the work should be suspended to clean the device. And only after that continue the kosbu. This will avoid overheating of the device and its breakdown.

The wrong selection of cutting elements

As a rule, owners of gasoline braids are divided into two camps. Some mowing both grass and weeds only with fishing line. Others, faced with high grass, immediately install a metal disk. I belong to representatives of the first camp. On a powerful two-kilowatt lawn mower, I am just scared to put a disk: everything flies from under it like from a gun. And with a worthy power of a braid for grass and fishing line, it easily cuts everything from hogweed to small bushes.

A fishing line for 3.2 mm with a diameter of 3.2 mm is installed on the Safun mower. Even three.Month.Old weeds on her teeth. Photo by the author

Working with a disk knife. Bad experience

For a very long time, my father.In.Law and I put a disk on a powerful EFCO braid, she chopped bushes as in a fairy tale, which ended in the second season. They tore off the gearbox, and the workshop announced just an indecent amount for repairs. This case proves that the knife is not always the best option. When a metallic disk for a gearbox, an increased load, especially when the cutting part finds a stump or brick in the grass. Here the gearbox is overloaded, up to the breakdown of the teeth or jamming of the shaft.

Which line is it better for a trimmer

With a new trimmer, I began to experiment and tried a fishing line for a trimmer, which will be most effective. The instructions were allowed to install a fishing line for a trimmer with a thickness of 2 to 4 mm. For the first season I tried four species. A square 2.4 mm, a round 2.4 mm and 3.2 mm, 2.4 mm twisted. With this power of the engine, I did not notice the difference. The consumption of thin fishing line was slightly larger, but for me it is not fundamentally. All fishing lines chopped thick weeds well.

Install a square fishing line for a trimmer on a “native” coil of a trimmer for grass. Photo by the author

I really felt the advantages of a square fishing line on a less powerful Honda. It cuts grass better at a lower engine power.

Good coil

The native coil of the new braid at first seemed to me flimsy, painfully thin walls! The forebodings did not deceive me: the first holes began to appear at the end of the second season, and finally it was rubbed after the first mowing in the third season. Replacement I found more reliable. The choice was small. You can buy the same, with thin walls, rubles for 300 or look more serious, which will live longer. I bought a more reliable coil with thick walls for 700. Everything is as usual: a good coil is more expensive and lasts longer. And there is no point in saving here.

The complete coil (left) did not last long. The new coil (right) has more reliable walls. Photo by the author

Gasoline gas mowing gasoline with butter

Before mowing grass with a benzo.Leggos, it is necessary to season the tool with fuel. As fuel, gasoline with butter is used. However, take into account that mixing gasoline with oil is needed only for two.Stroke engines. Four.Stroke engines operate on pure gasoline, since their design has a separate container. Oil crankcase. There are no 2-stroke gas crankcases in the design of the 2-stroke gasolimers, so you need to pour exclusively gasoline with oil into the tank.

As gasoline, it is recommended to use AI-92 brand fuel. In order not to make a mistake in choosing, you need to read the instructions offered by the manufacturer. Often, most manufacturers recommend using the AI-92 brand fuel, and only some recommend filling AI-95.

Gasoline must be diluted with a small one in a proportion of 1 to 25. This means that 40 ml of two.Stroke oil must be added per 1 liter of gasoline. However, not everything is so unambiguous here. The proportion 1 to 25 is universal, but each tool model has its own values. These values ​​are also indicated by the manufacturer in the instructions. Details about how to properly dilute gasoline with butter into a lawn mower is described here. After breeding gasoline with butter, pour a full tank, and start work.

It is interesting! If a four.Stroke lawn mower is refuel, then pure gasoline must be poured into the tank, and engine oil is added to the oil container to the maximum level.

How to improve a trimmer for grass for grass

I want to share with you useful information for those who use a trimmer, which is also called a lawn mower, benzo. And a motorcycle, and the inhabitants of the sleeping areas of high.Rise buildings dubbed him “good morning, country”. But, be that as it may, most wonder if there are options such as an eternal fishing line for a trimmer for a trimmer for grass with your own hands. In order not to torment users with the expectation of users, I will say right away: “Yes, it exists, and it will survive even the tool itself”.

At first, it would not hurt to understand what the factory fishing line for a trimmer wears out, which is constantly changing, which is not very convenient, and sometimes such a need can even spoil the mood, since there is simply nothing to replace. I noticed that the lawnmandsmen, in order to finish the work, are forced to use some wire instead of the fishing line, and on the Internet I even saw that for this they tried to use pieces of a soft hacksaw canvas, broken in half-there are openings for fastening from two sides. But all these attempts are ineffective, since the secant element always breaks, or breaks from strokes on the hard trunks of weeds, or on extraneous objects that are in the grass.

Instead of a fishing line, it is much better to use a thin steel cable. Its threads are made of instrumental steel, which is not subject to corrosion, but has an extremely high strength barrier. That is, in fact, pieces of a steel cable installed on a rotating disk Motokos should serve forever, in any case, much longer than the trimmer itself for the grass. But this is not entirely true, or rather, in order to provide the cable with an endless operational resource, its free end must be sealed, which is completely difficult or even impossible to do at home. The fact is that from frequent strikes the tip of such a second element will begin to flush and gradually turn into a bunch of steel threads that will be confused. There is only one conclusion: if there is an opportunity to seize the tip, like a plumbing cable. Do it and use it in the health resort.


Everything that is needed for the manufacture of the nozzle

The most difficult thing to make the nozzle is to mark and make holes under the knives and shaft a trimmer shaft for grass. That is why the finished pea plate is selected.

How to make a fishing line for a trimmer for a trimmer for grass

A chopped tape from PET bottles, if you wind it on a trimmer for grass, will mow, but not for long, because it is fragile and quickly breaks. It needs to be improved a little, and for this you need to do the following.

How To Check, Clean & Replace Lawn Mower Spark Plug

As practice shows, a fishing line for a trimmer for a trimmer for grass, made by yourself from one twisted tape, mows the grass well, but if stones or branches come across it, then quickly wears out. To eliminate this drawback, it is recommended to weave a plastic rope of several tapes, for example, from two or three. The following figure shows a homemade cord woven from three plastic strips. Although it differs in thickness from a single cord, it is much stronger than the first, and it serves as a longer time.

Further, as usual, the fishing line for a trimmer for a trimmer for grass is inserted into a mowing head or wound into a reel, and then inserted into the head, after which the sticking ends are cut so that they do not touch the protective casing.

Thus, literally from improvised materials, a free fishing line is obtained for a trimmer for a trimmer for grass, which can be made in unlimited quantities.

The process of manufacturing the nozzle for a trimmer for grass

First of all, it is necessary to clean the metal at the welding site. Then we take the puck and weld it inside the protective casing (right in the center). We weld a nut to the puck.

After that, using a drill, we drill two holes in the casing on each side. We process them with a file so that there are no sharp edges.

We install the finished nozzle on a trimmer for grass, and fixed with a nut. Then we insert a fishing line for a trimmer into drilled holes.

You can watch in detail about how to make such a home.Made nozzle on the video below. This idea was shared by the author of YouTube Channel “Ildar Sunagatullin”.

Power for a trimmer for grass

For more comfortable work with a trimmer, if it is understood to process a large area overgrown with grass, it is advisable to use a special belt. This device relieves fatigue from the hands and back of the mowing operator and greatly facilitates the process when compared with the same work, but without a belt.

Belts are shoulder and ranger. The shoulder belt is the simplest device and consists of a loop with two or one latch (carabiner), with which it is attached to a mowing unit. A plastic plate is usually attached to the second carbine, which protects the side of the operator from pressure with a bar trimmer for grass.

Shoulder belt is usually used with light trimmers weighing 3-4 kg. For heavier units, it is more convenient to use a parapier belt.

Quickly Unflood A Trimmer Using NO Tools

A belt for a trimmer for grass can be easily ordered via the Internet or buy in a specialized store where these devices and components are sold to them.

And higher.

If there is a desire to do it with her own hands, then any mistress, looking at this device, can easily sew it from improvised means (old belts and belts). You may have to buy buckles and carbines. But still, we recommend buying a ready.Made ran.Out suspension and not waste time and money to make the worst quality than ready.Made devices.

| Denial of responsibility | Contacts |RSS