How to insert a screw into an electric screwdriver. Tips for women on working with electric screwdriver

How to use an electric screwdriver correctly

Many novice masters often have a question of how to use an electric screwdriver, at the first acquaintance with it. This happens almost everyone, but the study of the principles of work and operating rules does not take much time due to the fact that the modern tool is convenient and simple with domestic use.

An electric screwdriver at home can be used everywhere, since modern devices in everyday life easily replace a drill, screwdriver and even a grinding machine with infrequent use. This requires special nozzles that can be purchased in many construction stores.

The implementation of almost any work associated with the assembly/disassembly or installation of fasteners is accelerated several times when using a battery electric screwdriver, and not a hand tool.

How to learn to distinguish self.Tapping screws for different materials

The home master most often has to work with metal, wood and materials such as plywood, wood-based slabs, OSP. In each case, you need to select self.Tapping screws not only in size, but also for its intended purpose. They differ in pitch of threads.

The so.Called metal self.Tapping screws are actually universal. They can screw everything except wooden details with them. This is due to the structure of the material. In wood, it is fibrous and quite loose. Frequent carving will simply doubt the fibers, so it is made sparse so that the wood subsides between the protrusions of the metal spiral.

Plywood and wood-based plate have a denser and more uniform structure, universal metizes with fine carvings are better suited for them. But if you need to fasten a thin steel sheet to a wooden base, select self.Tapping screws, as it performs the supporting function.

How to insert a bat

How to change the bat on an electric screwdriver and put it correctly, depends on the type of cartridge in the design of an electric screwdriver. There are 2 main types of the holder. Key and fast.Packed. The difference is the need for a special key that allows you to change the nozzle in the cartridge of the first type.

To fix the bat in the key holder of the equipment, the following actions are performed:

  • Take a key that resembles a rod with a lever and an mounted gear wheel in shape.
  • Introduced it into the groove on the cartridge, and the gear is planted on the teeth of the crowns.
  • Rotate the key to fist.
  • Insert the tail of the bits into the cartridge.
  • Klum with a key of fists, rotating it alternately in each groove in the opposite direction.

To fix the nozzle in a fast.Packed cartridge, the sponge is diluted manually, rotating the clutch counterclockwise. Insert the bat into the resulting hole. In this case, the holder’s coupling should be delayed in the opposite direction. In a one.Way cartridge, the procedure can be performed with one hand. If a two.Button option is installed, then the near sleeve is held with the right hand, and its left is rotated.

The correctness of the procedure is checked by turning on an electrical screwdriver in idle mode. If the nozzle fluctuates, then experts recommend extracting and squeezing it deeper.

How to change/insert/pull the nozzle (bit), drill

After the necessary nozzle (bat) for the drill is selected, given the value of the screw hat and the configuration of the recesses (straight, cross), it must be installed in the very center between the open fists, and fixed in the cartridge through the turnover of the sleeve on the hourly. If a key type cartridge is selected, then the key is set into a recess on the cartridge, and then turned along the time run until the nozzle is fixed. The end of the nozzle is placed in the groove of the screw. Before the device is launched, check the accuracy of the installation of the rotation direction, the focus should coincide with the twist of the screw.

Increasing pressure on the start button regulates the optimal rotation speed. When the screw is completely immersed, the mechanic of restriction of the force is activated, and then the drill stops.

Features of operation

Incorrect work and breakdowns can occur after switching the mode of operation of the tool during the rotation of the cartridge. To prevent this from happening, it is recommended to perform all operations only after turning off the electrical screwdriver and a complete stop of the engine.

It is also necessary to correctly select the torque of the device, given the hardness of the material with which they work:

  • Wood.Fiber slab and drywall. To tighten screws into these materials, use 1-4 modes.
  • Wood of solid species. The regulator ring is moved to maximum value.

Important! It is better to set the lesser torque value than required. When choosing an overstated value after twisting the screw, the cartridge of the electrical screwdriver will continue to rotate, and not stop, as it should be. Schlitz will be damaged.

Use an electric screwdriver as a drill can only be short. With a long load of the tool, which is not intended for drilling, the electric motor can overheat, which will lead to breakdown of the device.

Features of operation

Incorrect work and breakdowns can occur after switching the mode of operation of the tool during the rotation of the cartridge. To prevent this from happening, it is recommended to perform all operations only after turning off the electrical screwdriver and a complete stop of the engine.

It is also necessary to correctly select the torque of the device, given the hardness of the material with which they work:

HAMMERHEAD Screwdriver Rechargeable 4 Volt with Circuit Sensing Technology

  • Wood.Fiber slab and drywall. To tighten screws into these materials, use 1-4 modes.
  • Wood of solid species. The regulator ring is moved to maximum value.

Important! It is better to set the lesser torque value than required. When choosing an overstated value after twisting the screw, the cartridge of the electrical screwdriver will continue to rotate, and not stop, as it should be. Schlitz will be damaged.

Use an electric screwdriver as a drill can only be short. With a long load of the tool, which is not intended for drilling, the electric motor can overheat, which will lead to breakdown of the device.

Safety precautions

Before using a screwdriver, be sure to read about safety precautions in the memo attached to the tool. Often this tool is used in production. As a rule, the instruction “How to use an electric screwdriver” must be in acts on labor protection. In order to prevent accidents, working with a screwdriver, you need to follow all safety rules. Do not trust the instrument to people who do not know how to use a screwdriver, and cannot observe safety precautions. For example, children, elderly, sick people and people are in a state of intoxication.

Use this tool, having previously put on overalls and glasses. Remember that any tool, whatever it is, is source of danger.

Change of nozzles

During home repairs or other operations, the master often has to perform a change of nozzle. So that this procedure does not delay the process, you need to know how to secure a bat, drill or screwdriver correctly in an electric screwdriver.

How To Use a Screwdriver Bits With Drill (Correctly)

The equipment is fixed in a special element called a cartridge. The selected nozzle is pinched manually using a special key or automatically (without using the latter). The fastener method is determined by the type of cartridge.

Varieties of cartridges

Most models use a quick.Packed version of the equipment holder. To carry out the procedure with one hand, insert the nozzle between the open fists, and the other is slowly pressed on the trigger. In this case, the sleeve will rotate clockwise. In models with a key cartridge, the new equipment is inserted into the nest and rotated in the same direction until it stops.

To extract a drill or bit, the tool is switched to a reverse, fix the cartridge and press the Start button. At the same time, fists are unclenched, and the nozzle is easily extracted.

insert, screw, electric, screwdriver, working

Make sure that the drill or bit is tightly clamped in the cartridge, you can turn on the tool in idle. With proper installation, the nozzle will not hesitate and deviate.

Detailed instructions for replacing the drill

We will figure out how to insert a drill into a peorator. The whole operation takes much less time than manipulations with a fist mechanism. But a person who first picked up an instrument with a SDS cartridge does not understand at all what needs to be done.

Step by step must be performed as follows:

  • Turn up the tool upside down.
  • Having taken the base of the SDS of the mechanism, pull it down.
  • Insert the shank of the drill into the hole.
  • Release the cartridge, allowing the spring to return it to its original position. At the same time, the balls will enter closed grooves at the end of the equipment and hardly fix it.
  • Try to pull out the drill, pulling it for it. It should be extended to a distance of no more than 1 cm. And the absence of any backlash will be confirmed that the equipment took the right position.
insert, screw, electric, screwdriver, working

It is as easy to pull out the nozzle as insert:

  • It is necessary to wait for a complete stop of the rotation of the shaft.
  • Plant the peoporator with a cartridge up.
  • Pull the SDS mechanism down.
  • Pull the drill.
  • Let the spring return the cartridge to its original position.
insert, screw, electric, screwdriver, working

A large number of a wide variety of nozzles are produced for the pedorator. All of them have their own specific purpose and allow you to perform a wide front of various construction work. Thereby facilitating manual labor.

A popular nozzle for a peorator is equipment with a conventional fist mechanism. The so.Called fast.Packed cartridge. It is widely used when it is necessary to convert the peorator into a regular, but very powerful drill mode. The nozzle has a shank with grooves. By inserting it into the SDS cartridge, then you can use ordinary metal drills, inserting them according to the above instructions.

| Denial of responsibility | Contacts |RSS