How to install the blade in a hand jigsaw

Professional equipment

Professional equipment is designed for long, uninterrupted operation for 8 hours or more. They are equipped with additional tooling and have improved performance. These jigsaws work both hard and soft materials of different thicknesses. All these features significantly increase the price of such equipment.

Industrial jigsaws are small machines used in the woodworking industry.

In the photo professional electric jigsaws

Bolt-and-bolt fasteners

Despite the relative difficulty of attachment, jigsaws with such holders are still produced today. There are metal blocks with holes for the screws to fix the saw blades. There can be one fixing bolt or two fixing and adjusting bolts. Older models have a straight slot for a flat-blade screwdriver. Newer models have hexagonal slits for a special hexagonal key that comes with the tool.

Before inserting the blade into the jigsaw, the screws are loosened and once the shank is inserted into the slot they are tightened again. To avoid misalignment, they are tightened little by little and one by one, controlling the position of the saw with an angle. To this type of attachment fit saws with any form of shank, even obsolete models.

How to change saw blades with different types of fastening

Each saw’s attachment implies a different way of its installation.

He has screws with a hexagon. It is always included with the jigsaw. To do it step by step like this:

  • Open the guard of the electric jigsaw;
  • Loosen the screws (not completely);
  • Remove the blade which needs to be replaced;
  • Insert the other file, pushing it to the block tightly;
  • Tighten the bolts not both at once, but one by one;
  • Check all the time. check if there is no misalignment, observe the angle of 90 degrees with respect to the base of the device.
  • Screw clamp (with one screw):

DIY. How To Change The Blade On A Black & Decker Jigsaw. Bob The Tool Man

It is easier to install the file in it. It also has a hexagonal key on the head of the fixing screw. The jigsaw is equipped with it (it is on the body or on the cable). Perform the following steps:

  • Remove the protective cover;
  • Use a hex wrench to loosen the locking bolt;
  • Pull out the old saw blade;
  • Insert a new saw blade into the freed groove;
  • Insert the file with its teeth forward;
  • Slowly tighten the screw, making sure not to overtighten it;
  • Check that the file is perpendicular to the base plate;
  • Put the cover back on.
  • The quick-clamping system:

The instructions here are elementary. There is a small special lever. What makes it more convenient is that the safety guard can be kept on.

  • Pull the sliding lever. With this we open the lock and release the old file;
  • Holding the lever, we insert the required saw. Release lever. hear a click. This means that the saw is in place and the lock has closed.

The quick-clamping fastener also has an adjusting screw. It is used to adjust the position of the file. Setting it up correctly. 90 degrees to the base of the jigsaw.

And a universal tip for all fasteners. Do not tighten the saw too much (it will rattle and then break). But do not pull the saw blade in the jigsaw. is also a challenge. While working, the saw blade can fall out, and this is fraught with possible injuries. So look for the golden mean. not too much, but not too freely either.

See also  Wood hacksaw for precision work

How to replace the saw blade in a jigsaw?

The jigsaw is a tool that many men know from their childhood, from school labor lessons. Its electric version is now one of the most popular handheld tools, which greatly simplifies the work of home craftsmen. Unlike a hand saw, this electric device needs closer attention, especially its most important element. the movable unit with a removable saw.

install, blade, hand, jigsaw

How to saw circles

To cut a circle in the workpiece is one of the most difficult tasks for a beginner. But there is nothing unbelievable about it, as you can quickly learn how to work correctly with an electric jigsaw.

  • Turn off the pendulum stroke.
  • Mark the holes.
  • Drill a hole for the saw blade.
  • Set the compass stop and get to work.

The compasses can be made with your own hands. For this you will need a flat board and a screw. On the bar securely fix the jigsaw blade. Then measure the desired segment (equal to the radius of the circle), and in the center screw in a screw, which will serve as the axis of rotation.

How to insert the saw into the hand jigsaw

As a rule, using an ordinary hand jigsaw, associated with far fewer problems than with its more advanced, electrical counterparts. Be that as it may, there are several useful recommendations for this tool, some of which concern the installation of the saw blade. Let’s clarify how to properly insert the saw into the hand jigsaw without complicating the further sawing process.

The first thing you should pay attention to is the very location of the saw in the places of attachment. For best grip, the tails of the saw should not be clamped at the edge or behind the screw, but 1-2 mm in front of it, as indicated in the image above. Before installing, remember that the teeth of the blade always point toward the handle, because sawing is done while the tool is moving downward.

First, the edge of the saw should be secured at the handle. Then you need to squeeze the edge of the arc slightly and tighten the other end of the blade in the opposite mounting. To do this you can put the tool against the edge of the workbench and press it with your chest. Thus with one hand to insert a saw into slots, and with another to tighten a thumbscrew fastener. If the size of the fasteners do not allow you to fix them securely by hand, you can tighten them slightly with the pliers. The main thing is not to overdo it, so as not to break the thread.

For jigsaws with a tubular arc, there is a special device that, in most cases, is part of the sawing table. This product consists of 2 circular slots located on the edge of the board. The tool is inserted into the recesses, after which the saw blade is quietly tightened in the clamps. To learn how to insert the jigsaw in the jigsaw in more detail see the video below.

How to saw with a jigsaw? / As

Jigsaw sawing. Grade 5 The main advantage of the hand jigsaw is its ability to cut both small and very small complicated holes. How to work with a jigsaw?

How to insert the jigsaw blade correctly? / How to insert the jigsaw into the jigsaw: instructions on how to change the saw blade Turn the lever on the spindle to fit the jigsaw. Jigsaws with a quick-clamping system:Such a tool is equipped with a special lever that releases the saw, so it is not necessary to remove the protective cover.Pull the lever, which opens the lock by pushing the stem forward.Insert the blade’s shank into the jigsaw and release the lever. items.

See also  Plywood handicrafts with a jigsaw

How to insert the jigsaw blade correctly into the jigsaw blade? / Jigsaw. What to choose and how to put the file in the jigsaw. YouTube Suggested time: 37 seconds

How to Saw with a Jigsaw Correctly? / How to saw straight with a jigsaw? Suggested time: 64 seconds

How to install a jigsaw blade on a jigsaw? / How to insert a jigsaw into an electric jigsaw The order of attachment:mechanism. plastic handle-pad (lever), is pulled inside the jigsaw, the stem is released; the saw is inserted to the stop, the shank in the slot; the pad is released. the saw blade is secured.Dec 7, 2017

How to insert the jigsaw blade into the jigsaw (electric, manual and. Works with thin jigsaws like a hand jigsaw, but is just as fast as an electric jigsaw. The main advantage of using a stationary.

How to insert a jigsaw into a jigsaw? How to insert it manually. In order to fit a jigsaw into the jigsaw holders, you need to hook the edge of the jigsaw onto one end of the handle. Then, by gently squeezing the edges of the handle (.

How to properly insert and secure the saw blade in the jigsaw What are the clamps and blade fasteners for the electric jigsaw? How to correctly change the blade and install it in the jigsaw? Quick.

How to insert the file into the jigsaw correctly, how much. The jigsaw is fitted between the jigsaw jaws and secured by a pair of screws. The hand jigsaw does not only cut in a straight line, but it also makes.

How to fix the jigsaw in the hand jigsaw correctly

How to insert the jigsaw into the jigsaw correctly. Figure 1. Electric jigsaw. Electric jigsaw is a manual. does not require permanent fixation of the second end of the jigsaw, which is typical for a conventional jigsaw.

How to install a hand jigsaw blade. How to use. Today, the jigsaw is a high-tech hand tool that. and easily saw off tinplate, it is necessary to securely fasten the workpiece About how to select the right saw to the material, and about how to insert the.

Jigsaws for jigsaws: basic recommendations for selection and operation

The skill and skill of the user is worthless if the jigsaw is fitted with a useless saw. Correctly selected cutting tool ensures high purity and speed of processing and allows to saw materials with maximum precision and without errors. With regular and intensive work, the saw wears out quickly enough, so there is a huge selection of different types and types of cutting tools available in the retail network.

There are 4 common types of shank, which are denoted by the corresponding letters:

  • T. the most common T-shank (or cruciform) type. It can have one or two stops (European type);
  • U. straight shank with indentation (notch) at the end. It is also called the “American shank” because this type of saw blade is made for tools manufactured in the USA;
  • M. the shank for saws from the company Makita;
  • F. jigsaw blade by Fein.

Shank type is the first letter of the standard saw blade designation. This is followed by the length in millimeters. It can range from 50 to 150 mm, followed by the size of the teeth, which are marked with the Latin letters A, B, C or D (in ascending order). The last letter indicates additional information:

  • F. bimetal blade;
  • O. narrow back part of the blade, convenient for sawing curvilinear shapes with small radius of turn;
  • P. precision cut;
  • X. progressive tooth spacing;
  • R. Reversible teeth.
See also  How to put a blade on a trimmer for grass. Disk selection criteria

Important! The above classification is common, but not binding. Some manufacturers use their own marking system. Other markings are also possible, indicating the metal of the blade or the material to be processed.

Selection of the most suitable saw blade is based on the analysis of the material to be shaped and the expected results. Experienced craftsmen are guided by the type of teeth. the shallower they are, the cleaner the cut and the tighter the material is available to them. In addition, the nature of the edge will be influenced by the amount of set. the more it is, the stronger the edges will be chipped.

Usually, jigsaws with a set of jigsaws are used for wood. Also note that the cut is cleaner on the side opposite to the direction of the teeth. Usually they are directed to the jigsaw, so the material is placed face down and the marking is made on the back side.

Note! It is recommended to have a set of saws designed for different jobs on all the most common materials. This will reduce the time to find the right blade and allow you to do the job more qualitatively.

The tool consists of 3 elements: the handle, the frame and the saw. When selecting a jigsaw, the material of the frame and handle, the weight of the product, the quality of attachment of elements, the type of blade and design features are taken into account.

On wood

For comfortable woodworking, you need to pay attention to the following:

  • Choose the right frame shape for the task at hand. For example, they can be rectangular or pointed.
  • A wood jigsaw should be lightweight. When you are sawing laboriously, a lightweight tool can reduce stress and hand fatigue. Tools with an anatomical handle should be chosen. Such models are more often found in the assortment of foreign manufacturers.
  • The strength of the frame plays an important role. Titanium or steel jigsaws are to be preferred. The blade made of aluminum is not very strong, it will change position when in contact with the material.

Comfortable use depends on the design of the jigsaws. When choosing between nuts and drums, it is better to give preference to the latter option. In this case, it is not necessary to use wrenches to change the blade, t.к. these clamps can easily be unscrewed.

On metal

Hand-held tool handles metal parts up to 1 cm thick. Sawing speed is slower than with wood. Choose a tool with a blade that is made from a high-strength material. Metal saws are made from hardened, high-carbon steel. Fine-toothed work is the most effective.


When making a decorative cut, a jeweler’s jigsaw is used to make fine lines and curves. It differs from standard models in its lightness and small size. In this variant the frame is sliding, has a clamping connection. This design provides a strong tensioning of the blades.

In jewelry work, decorative wood carving with a jigsaw is used thin saws that often break. The design of the tool makes it possible to insert a longer splinter into the tool to continue working.

For additional thread tensioning in some models the frame is located in the opposite direction from the handle.

| Denial of responsibility | Contacts |RSS