How to launch a single tractor in the cold. General rules for conservation of technology

Storage of a walk.Behind tractor in winter

In order for the one.Axle tractor (motor.Cultivator) to serve for a long time, it needs to provide proper care. Supporting equipment includes preparation for work, cleaning after work, timely maintenance, as well as proper storage of a walk.Behind tractor in winter. If you do not plan to operate the uniform tractor in the cold season, then it should be preserved. Otherwise, when the winter is over and it is time to plow, a number of problems may arise. From difficulty starting the engine to overhaul. In order to avoid difficulties and additional costs, we recommend that you follow a number of simple rules. About how to store a single tractor (cultivator) is described in detail in the operating manual. In this article, we will note the general rules for preserving technology.

Preservation of technology begins with its thorough cleaning. Especially attention should be paid to inaccessible places in which pollution accumulates. When removing dirt from the surface of the product, it is not recommended to use iron scrapers, t.To. They damage the protective coating, which leads to the appearance of rust. After cleaning, all the parts of the walk.Behind tractor (motor.Cultivator) must be wiped out dry. There should be no moisture on the surface of the product to avoid corrosion. The same thorough cleaning is required to be attached equipment.

Then it is necessary to inspect the unoic tractor (cultivator) for damage and breakdowns. If the details that have become unusable are found, then they should be replaced. If you have experience, this can be done independently or contact the service center.

You can buy spare parts for a walk-behind tractor (motor-cultivator) “Neva” at the factory of CJSC “Ko-Neva”.

How to start a single tractor correctly?

After you bought your same.Based tractor, you should not immediately start it, even if the consultants assure you that the equipment is completely ready for operation. You need to start with preparatory work.

To do this, you need to first check the oil level in the engine. It should be enough. If not so, oil needs to be added. If you run the engine without oil, it will immediately fail. On sale you can find motoblocks, such as Caiman, which have an oil level sensor. If the lubricant is not enough or it will be absent at all, the engine will simply not start. It is very convenient and significantly extends the service life of your equipment.

After that you need to fill in the fuel. During the purchase, check with the consultant or in the operating instructions the type of gasoline, which is suitable for your motoblock model. If the unit has a two.Stroke engine, then fuel must be diluted with oil in a certain ratio. Never use low.Quality fuel, as well as one that is not suitable for your walk.Behind tractor.

The final stage of preparing the machine for launch is to check all connections and fasteners. All moving elements should not be tightly tightened. Their work should be elastic, but smooth.

The launches of diesel and gasoline motoblock are slightly different among themselves. The gasoline unit is launched in this way:

  • Open the gasoline valve;
  • The lever of the suction should be in the “launch” position;
  • The ignition must be turned off;
  • Pump a mechanical starter a couple of times;
  • Now you need to turn on the ignition;
  • Turn the starter again.

If you have an electric starter, then you can immediately turn on the ignition. Starter quickly pumps fuel to the carburetor.

With diesel motor block, things are a little more complicated. The new unit is completely dubbed, unless, of course, no one started it. To pump it, you need to twist the starter. The process will be longer than in the launch of a gasoline machine, but as a result, the same.Based tractor will start.

If you have a manual starter, then you can pull it, but you can have a one.Based tractor in another way. To do this, you need to open a fuel tap, and already from it to spin each connection to the nozzle itself. You unscrew the connection, wait for the fuel to pour, and twist it, moving on to the next.

With a mechanical start, you need to open all the taps and put the gas in the middle position. Squeezing a decompressor, download a couple of times, holding it with your finger. After that, lower the decompressor and pull it until its initial position. Press it again and do not hold it, but immediately pull the starter. The same.Based tractor must earn.

Preparation of the walk.Behind tractor for winter

Before sending one.Time tractor for winter storage, you need to carry out a number of procedures for its successful “wintering” and quality work in the spring. First of all, before the onset of frosts, the one.Axine tractor should be washed and thoroughly dried, small breakdowns should be eliminated. All working mechanisms and nodes carefully lubricate. The cutting elements of the attachment equipment also clean, sharpen and lubricate.

Store a single.Axle tractor should be in a dry ventilated room. There is no need for additional heating.

Basic rules for the conservation of a walk.Behind tractor for the winter:

Adding Water Manually In Automatic Washing Machine | Washing Clothes Without Tap Connection

  • Change the oil in the gearbox and engine.
  • Clean and pour oil filters with oil (if a bath is provided for them).
  • It is recommended to unscrew the spark plug, pour several milliliters of oil into the cylinder and manually scroll through the crankshaft several times.
  • If a battery is installed on the walk.Behind tractor, remove it and take it to a warm room. Also several times during the winter, do not forget to recharge it.
  • A special anti.Corrosion coating can also be applied to a cleaned and dry one.Axle tractor, which can be purchased in specialized stores.

We also offer you to get acquainted with the video that shows the process of preparing a walk.Behind tractor for winter:

Preparation of the walk.Behind tractor for winter

Before sending one.Time tractor for winter storage, you need to carry out a number of procedures for its successful “wintering” and quality work in the spring. First of all, before the onset of frosts, the one.Axine tractor should be washed and thoroughly dried, small breakdowns should be eliminated. All working mechanisms and nodes carefully lubricate. The cutting elements of the attachment equipment also clean, sharpen and lubricate.

Store a single.Axle tractor should be in a dry ventilated room. There is no need for additional heating.

Basic rules for the conservation of a walk.Behind tractor for the winter:

  • Change the oil in the gearbox and engine.
  • Clean and pour oil filters with oil (if a bath is provided for them).
  • It is recommended to unscrew the spark plug, pour several milliliters of oil into the cylinder and manually scroll through the crankshaft several times.
  • If a battery is installed on the walk.Behind tractor, remove it and take it to a warm room. Also several times during the winter, do not forget to recharge it.
  • A special anti.Corrosion coating can also be applied to a cleaned and dry one.Axle tractor, which can be purchased in specialized stores.

We also offer you to get acquainted with the video that shows the process of preparing a walk.Behind tractor for winter:

Preparation for the winter of the walk.Behind tractor

A huge role for the extension of the operating time of the Motoboblock available in the household is played correctly preparation of technology before the winter period. Many novice farmers make big mistakes, leaving the unit to winter in inappropriate conditions, or trying to get it into a minus temperature without preliminary preparation. As a result of this, the main mechanisms of the technique lend themselves to increased wear, and inevitably fail at the most inopportune moment.

How to start Tractor �� in cold weather

The advantages of modern motoblock are its multifunctionality and high performance. Subject to the availability of appropriate attachment equipment available in the farm, the unit can be actively used in winter. To clear a large amount of snow and solve other household problems.

At the same time, the improper operation of the walk.Behind tractor in winter, and especially its incorrect launch, significantly reduces the working resource of the main mechanisms of the unit. What to do. To prevent typical errors when starting a “cold” walk.Behind?

launch, single, tractor, cold, general

First of all, you will need to deal with the type of cooling system provided for in its design. Units equipped with an air system are more simple when storing and starting in the winter. They do not need a rapidly freezing antifreeze and a constant check of the radiator. At the same time, the air cooling system has its drawback. The engine heats up faster with it, which means it cools faster, which will not allow long breaks when working in winter.

Many motoblocks need preliminary insulation of their engines to operate in winter. For this purpose, both branded covers and various improvised means. Blankets, blankets and other fabric products can be used. It is especially important to provide high.Quality insulation in conditions of severe frosts, up to.20 ⁰C. If the temperature does not drop below 5-10 ⁰C, then this step can be skipped.

An important role is also played by a place in which the one.Axle tractor is stored. If the unit is planned to be actively used in winter, then it is best to choose a heated room for this. A garage or another household building.

With intensive use of the walk.Behind tractor in winter, it is extremely important to take care of the oil poured into the gearbox. Synthetic oils are best for use in winter, since they, at subsequent temperatures, retain their most important properties longer. In any case, it is best to use more liquid oils that do not thicken so quickly in the cold.

Following all these rules, the owner of the walk.Behind tractor can easily start his unit. The launch of an agricultural machine in winter is carried out in the same sequence as at any other time of the year. The only difference is to allow the walk.Behind tractor to work at least 15 minutes on idle. During this time its engine will warm up and will be completely ready to work. In more detail about starting a walk.Behind tractor in winter, you can find a video.

Correct launch of a walk.Behind tractor: First, after winter and without a starter

The first step in the operation of any equipment is its launch. In the case of such a complex device as a single tractor, already at this stage you can cause damage to the machine, which will affect the quality of work and operating time. The correct launch of the walk.Behind tractor will avoid many malfunctions. And, accordingly, will make it possible to save time and money on the repair or replacement of spare parts.

If you purchased a new car, then first of all you need to carefully read the instructions for operation. This step must not be missed, even if you used motoblocks earlier. The instructions contain the most accurate information on how to start a single tractor for a particular model.

In addition, before the first launch, the following points should be performed:

  • Check the oil level. Some machines have special sensors that do not allow the engine to start if it is not enough oil in it. Other models can be made with insufficient level of technical fluid, but this can cause great damage to the machine;
  • Pour fuel. In some models, gasoline needs to be diluted. The proportions are written in the instructions. You also need to be neat and with diesel fuel. The instructions should indicate what type of fuel is used at a certain temperature. The use of summer fuel in the winter season can lead to clogging of fuel lines;
  • Check the connections and configure them. Gas, clutch and steering wheel must be adjusted so that they move smoothly.

Preparation of the walk.Behind tractor for winter

Before sending one.Time tractor for winter storage, you need to carry out a number of procedures for its successful “wintering” and quality work in the spring. First of all, before the onset of frosts, the one.Axine tractor should be washed and thoroughly dried, small breakdowns should be eliminated. All working mechanisms and nodes carefully lubricate. The cutting elements of the attachment equipment also clean, sharpen and lubricate.

Store a single.Axle tractor should be in a dry ventilated room. There is no need for additional heating.

Basic rules for the conservation of a walk.Behind tractor for the winter:

  • Change the oil in the gearbox and engine.
  • Clean and pour oil filters with oil (if a bath is provided for them).
  • It is recommended to unscrew the spark plug, pour several milliliters of oil into the cylinder and manually scroll through the crankshaft several times.
  • If a battery is installed on the walk.Behind tractor, remove it and take it to a warm room. Also several times during the winter, do not forget to recharge it.
  • A special anti.Corrosion coating can also be applied to a cleaned and dry one.Axle tractor, which can be purchased in specialized stores.

We also offer you to get acquainted with the video that shows the process of preparing a walk.Behind tractor for winter:

What is the preparation of the walk.Behind tractor for work in winter

If you plan to actively use the unoic tractor in the cold period, then for storing the unit the most optimal option is a dry, heated room (for example, garage). In extreme cases, the one.Axic tractor can be placed outdoors, but at the same time cover it with tarpaulin or other waterproof aeronautting material. The same conditions must be ensured when it is preserved. Proper storage of a walk.Behind tractor and motor cultivator. This is the key to their normal work in the next arable season.

The preparation of the walk.Behind tractor for work in winter includes oil replacement in the gearbox. In the snow season, it is better to give preference to synthetic transmission oils, t.To. They, unlike mineral species, retain their properties better. Check out information on the choice of oil for the gearbox.

Please note that in the Neva MB2 and MB23 motoblocks, the default assembly in the gearbox is flooded by the TEP-15 GOST 23652-79 (SAE90 API GI-2), suitable for temperature from.5ºС to 35ºС. If you remove snow at a temperature below.5ºС, then pour in the reducer of the unit oil TM-5 GOST 17479.2-85 (SAE75W-90 API GI-5), the temperature regime of which varies from.40ºС to 45ºС. The use of proper technical fluids will ensure uninterrupted operation of the unit.

If you do not plan to operate the one.Axle tractor (motor cultivator) in the cold season, then the unit must be ensured proper storage or, in professional language, canning. About how the conservation of the walk.Behind tractor is carried out is described in this article.

Get fresh information about our company, news and promotions. Indicate your e-mail and we will sometimes send you letters.

Many owners noted such a phenomenon when trying to start a technique. Why gives it to the hand when you start a single tractor and how to avoid it? A similar phenomenon usually indicates early ignition. This is a common problem of motor vehicles.

launch, single, tractor, cold, general

Early ignition is a consequence of contact production during operation. To eliminate it, you need to rectify the starting system.

Another reason for the return in the hand may be poor quality of gasoline. You need to drain the fuel and replace it with others, not forgetting to observe the proportion with the oil. Perhaps the tank washing will be additionally required. When dust and dirt accumulate in it, gasoline clogs, which leads to uneven operation of the motor. Understand for sure that it is the fuel that affects the operation of the technique and provokes the return when starting the engine, you can by the spark plugs. Having unscrewed, you need to investigate it for burning and soot. If the combustion products are in abundance, then this clearly indicates the low quality of gasoline (provided that the candles are changing regularly).

Important! In any case, the same.Based tractor, like any technique, requires care. All basic recommendations are indicated by the manufacturer, so you should carefully read the instructions and observe all measures to maintain the machine.

launch, single, tractor, cold, general
| Denial of responsibility | Contacts |RSS