How to make a belt for a trimmer for grass. We make a motorized car

A belt for a trimmer for grass from China. Characteristic and design of the product, price, video

Hello! Well, soon the summer season will begin)) Sourcelessly without “mowing” on the site can not do. A neighbor in the country acquired a “ran” belt for its Khuskvarnna last summer, says that it is much more convenient than shoulder! So I decided to buy myself too, but so far I have not decided which one is better? There are just with “straps”, there are soft straps, there are some kind of casing. In general, if there are happy owners of the background belt, please advise the model and company. And in general, the opinion is interesting, is it necessary?

With my champion T514, this included. Support on both shoulders, plus soft lining under the lechi. The braid itself for grass is attached to the side and rests on a wide plastic plate. Result: a rather difficult braid for grass becomes very convenient to use. Hands are occupied only by lifting/lowering the head (almost without effort, if the hook is placed in the center of the corner of the bar) and turning left and right. I think the most convenient way of suspension of a trimmer for grass. Structurally, the Champions of Champions.

Last season, he drank a heavy Chinese scythe (42 cubes) with a standard shoulder belt. The shoulder was quickly tired, and the design itself is apparently not successful. For this season, I bought a Solo satchery belt until I mowed, but I pulled Motokos on it:. Much more comfortable. Having harvested very quickly, one big buckle on her chest is put on it and that’s it.

Someone visited the back of the back of the straps?

I tried this, according to it, distributes the weight more to the lower back than on the shoulders. We have the price in n.N. About 1 tyre. I can sell for 500 r.

Dima80 I set it up incorrectly, align the lower belts. The backpack is good, 4 hours of work, only the legs are tired.

make, belt, trimmer, grass

I have already cut off such a suspension for 2 seasons, the braid for the grass is heavy, almost 8 kg. If you fit well, does not grate anywhere and does not press. Before that I used Hitachi, also good, comfortable. But Stilevskaya (from the 130th) personally seemed less convenient to me, the Germans saved on some trifles. I also tried the champions, that is generally liquid, no matter how you drive it. It hangs out. They wondered how to sew a comfortable suspension on his own. She sews bons professionally and all that, in short, understands how such things do. Well, in principle, you can sew, but there are a lot of muddy. The material will go off rubles at 300-400, special. Sewing machine is needed (or manually with a nameplate), and a free heap time.

make, belt, trimmer, grass

The duration of the mowing

An electronic mower can work out without a break for less than 20 minutes, after that it will need the same time to relax. The motor needs to cool so that the plastic parts do not melt.

Gasoline trimmers for grass allow more long.Term operation. On average, you can work up to 40-60 minutes, or yet fuel is completed. In any case, the break should not be less than 10 minutes, but better if all 20. The case here is in the engine itself, which is deprived of natural cooling system for the internal combustion system using water. To avoid overheating and overstated wear, it is better to give the device the opportunity to cool down, and at the same time return your strength or collect already mowed grass.

See also  Can a pregnant woman mow with a trimmer?. What vitamins should be taken?

A rug belt for a trimmer for grass-purpose

Many models of trimmers are equipped with an ordinary oblique belt. However, for work, it is best to purchase a rug belt, which is specially designed for motorcycle. Thanks to a thought.Out design, it evenly distributes the weight of the device for the whole body. The shoulders with a soft lining reduce the severity and relieve pain in the forearms. The hard back disperses the load between the upper and lower backs, excluding the lower back. The impact.Resistant protection for the thigh prevents the contact of motorcycles with the foot so that it does not rub and transmit vibration. In addition, the belt provides:

  • Convenient transportation of a trimmer for grass;
  • Comfort during operation due to the ergonomicity of the spit position for grass relative to the body;
  • Safety in work. The paraphernal belt prevents the slipping of motorcycles from the hands at the time of the stabs of hard objects.

Instructions for the use of Darsonval

The correct trimmer for grass

There are trimmers for grass for which additional devices are not needed. For example, light electrochemers on batteries. Even a child can tolerate them, and they are firmly lying in their hand without breaking. But in most cases, trimmers for grass weigh from 6 to 9 kg, and in order not to tire about to transfer them from place to place, you need a belt.

1) for transporting a trimmer for grass. Transport a trimmer for grass to the country when there is no car, a difficult business. If the equipment does not have a belt, then at least a cover with a belt over the shoulder should be sewn. How to dress a trimmer belt for grass video correctly. How to put a trimmer belt for grass correctly. How to wear it correctly. How right. This will facilitate the load when transporting a trimmer for grass.

2) for comfortable mowing of grass. After all, if the hands are lugged, then the weeds and the overgrown lawn will not want to mow. And if you want, then the hand trembling with lethargy is a dangerous option.

3) for the ergonomic position of the trimmer for grass relative to the body. Correctly fastened and adjusted in length belt protect against back injections and overvoltage of the muscles of the back.

How to make a powerful grass cutter trimmer at home (DIY brush cutter)

4) for security. A trimmer for grass will be much safer if the probability of slipping from the hands when it gets into the cutting head of branches and hard vegetation decreases. When this happens, a trimmer for grass, whether it is a benzo- or electric cobber, makes a sharp jerk, and a trimmer for the grass literally “breaks out” from the hands.

It is for these reasons that many models of garden trimmers are equipped with belts. They are threaded through the shaft of a trimmer for grass and attached over the operator’s shoulder. The belt helps to balance the total weight of the trimmer for grass and the operator, and you do not have to compensate for the balance, stretching your hands or setting back one leg.

Grass trimmer belt. How to adjust the ranks of a trimmer for grass

The main thing is to correctly adjust the trimmer belt for the grass, so that you should put on the mask correctly. Adjust the height of the hook of the smynet belt of the trimmer for the grass with a handle of the shoulder straps so that the trimmer knocked down to the ground is placed parallel to the surface of the site (strictly horizontally). When working with a saw trimmer for the grass, adjust the height of the hook (with a tightening of the shoulder belts) so that the sawy disk of the trimmer for the grass is tilted a little forward relative to the surface of the earth.

See also  How to make a molom -strand muffler quieter. The starter screams, the cord comes out

Moving the ear for hanging braids for grass on a trimmer belt for grass or back, equalize a trimmer for the grass so that when the steering wheel is released, the knife of the trimmer for the grass is near the very surface of the site, but does not go to the grass. For sawing bushes and young trees, a trimmer for the grass with a saw drive of a bureau for the grass must be equalized so that when the steering wheel is released, the car hung on the hook horizontally land. Attach

Adjust the shoulder belts of a trimmer for grass (braids of the harness) so that the load is distributed moderately on the shoulders (check by pressing the handle hook of the trimmer for the grass).

Such Range belts of a trimmer for grass from Husqvarna (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, benzocoses, motorcycles, electric cosecs, and bureaus.

Characteristics

Weight, kg 0.44 brand kronwerk Warranty (years) 0 Type of packaging blister packaging type product belt for a trimmer for grass

Data on and the availability of goods may differ. Please clarify the exact cost and availability of goods in stores.

231, 00 Protective mask with a Swann net 230.1 1S HC-01 Economy

208, 00 protective krafter colorless

541, 00 knife for a trimmer for grass 40 teeth 230 × 25.4 mm

427, 00 Motor oil Sterwins 2T for intensive load, 1 liter

181, 00 Less line for a trimmer for a trimmer for grass Sterwins Ø2.5 mm 10 m Star

600, 00 Motor oil sterwins 2t for stressed modes, 1 liter

460, 00 Motor oil for 2t engines Rezoil Dynamic 1 L

421, 00 knife for a trimmer for grass 4 blades 230 × 25.4 mm, thickness 1.6 mm

570, 00 Motor oil sterwins 2t for periodic modes, 1 liter

521, 00 Coil for trimmer for grass Rezer Th 3343 E-meter, M10x1.25 left

5 611, 00 lawn mower gasoline Parma Practitioner BTK-052, 2 l.With.

5 554, 00 lawn mower gasoline caliber BK-1480, 1.9 liters.With.

5 991, 00 gasoline gasoline Oasis GT TB-2500N show all related products

Belt setting

To ensure the conditions of comfortable work, you need to be able to wear a rug belt correctly. This process requires a certain dexterity, but then, after adjusting the satchel for itself, it will be much faster and easier to worry.

Many models of trimmers are equipped with an ordinary oblique belt. However, for work, it is best to purchase a rug belt, which is specially designed for motorcycle. Thanks to a thought.Out design, it evenly distributes the weight of the device for the whole body. The shoulders with a soft lining reduce the severity and relieve pain in the forearms. The hard back disperses the load between the upper and lower backs, excluding the lower back. The impact.Resistant protection for the thigh prevents the contact of motorcycles with the foot so that it does not rub and transmit vibration. In addition, the belt provides:

  • Convenient transportation of a trimmer for grass;
  • Comfort during operation due to the ergonomicity of the spit position for grass relative to the body;
  • Safety in work. The paraphernal belt prevents the slipping of motorcycles from the hands at the time of the stabs of hard objects.

How to make a shoulder belt for a trimmer for grass

The exploitation of braids for grass is quite complicated without a number of additional accessories, including the cutting headset, as well as a shoulder belt and a casing that protects the operator’s legs from stones and herbs. Each of these devices plays an important role in the configuration of a trimmer for grass, so special attention should be paid to the study of their characteristics and choice.

See also  How to make a nozzle on a chainsaw angle grinder

Owners of local areas often use different knives and discs to care for the territory. Their main function. Fight large weeds and old dried bushes. In most cases, manufacturers use the following materials for the manufacture of knives:

The knives of the trimmer for grass also differ in the type of cutting edges. The headset can have 4.8 or more teeth that are at the same height or one above the other. In addition, the blades have a carbide.Melting tip or with holes inside the teeth.

The cutting set can also be made in the form of several blades or to have the shape of a solid disk to which strong metal teeth are attached.

It’s an underground FOOD bunker!

How to wear a trimmer belt for grass correctly

Working a trimmer is much more convenient and easier to use a special belt. Thanks to him, the operator can mow large sections of grass without pain in joints and muscles for several hours in a row. The design of the biceps belt is designed so that the lawn mower is kept using the mounts itself. Without the help of hands. She will only need to set the direction, and she will do everything else herself. About how to correctly attach a belt to a trimmer and set it up for yourself to facilitate the load, and it will be discussed in this material.

Hook height adjustment

The most important thing is to adjust the belt so that the trimmer for the grass is at the right level from the surface of the earth. To do this, raise or lower the height of the hook, which is carried out by pulling the shoulder belts until the holder is lower than the hips by 10-15 cm (palm width). In this case, the knife of the attached braid for the grass should be parallel to the surface, that is, in a strictly horizontal position.

On a note! If the trimmer for the grass is attached too high, then this will greatly limit the capture of the grass.

If you have your own site, then, of course, you had to deal with the problem of overgrowing the site with grass. To remove this grass for a long time and dreary, and therefore sooner or later there is a desire to purchase a trimmer for grass. It will be gasoline or electric. To decide the buyer, since there is nothing special to advise here. Everyone knows how it is more convenient for him. To be limited to the length of the wire and not to be cleaned with the preparation of the fuel mixture, or to prepare the mixture and not be limited in the processed territory.

You can read about electric trimmers in this article. And here I will tell you about the gasoline version. I will consider the characteristics and at the end of the article I will give examples of the most optimal models in my opinion.

Than 200 types of trimmers in one place at the lowest prices. Click to see

Consider what varieties of benzotrimers are.

| Denial of responsibility | Contacts |RSS