How to make a disc tip on a single axle tractor

The disk mower for power tillers do with their own hands drawings

To get a good harvest of potatoes you need to properly process the area. Previously, they used manual labor and simple equipment for tilling the land. a hoe, a rake and other implements. The use of power tillers with different attachments can significantly speed up the process of loosening the soil. Before buying a power tiller you should familiarize yourself with the main models, as well as. with the recommendations of experts.

Of course, making an arrow is not a simple thing to do. Skills in welding and fitter’s work are required. But this will allow you to save quite a decent amount of money and make a device that is most convenient for the user.

The following tools may be needed for the work:

  • Arc welder.
  • Electric drill with a set of reliable drill bits of different diameters.
  • angle grinder and several tools and disks in the kit.
  • An electric sander.
  • Gas burner designed for heating the metal during its hardening.
  • Workbench with a vise.
  • Various files.
  • Consumable fasteners (bolts, nuts, rivets).

To make such a device you need to cut two equal parts from a sheet of steel 2 mm thick. Then you need to bend these plates so that the bending radii coincide. These surfaces are then welded together and the seams are machined to achieve a perfectly flat surface. The quality of scraping significantly affects the ease of movement of the device and the absence of clogging with soil bad joints.

Particular attention should be paid to the strength of the buttstock, because it carries the main load during the operation of the device.

If you make two of these and connect them in an unusual way, you get a device for two-row tilling.

If you make such a device with an adjustable system of wings, based on the hinge connection and installing movable rods on the end of the device, which regulate the angle of the construction, you get an adjustable two-row mower.

Making a disc device can be made with improvised material, which will significantly reduce its cost.

The basic steps of making a disk device:

  • From a 2 mm thick steel plate cut two round discs and sharpen their edges to reduce the resistance when digging into the soil.
  • Use a hammer to bend the elements: one side should be concave, the other is convex. This shape of blade gives better raking of the ground and covers the plants with it.
  • We use special fastening bolts and welding to connect the racks, turnbuckles and the T-shaped lever.
  • We connect the wheels of the disc device themselves with adapters.
  • The distance between the discs is the same as the row spacing.
  • The vertical angle of rotation of the discs is ensured by the turnbuckle.
  • Then the whole device is attached to the power tiller arm with bolts and locking elements.

Getting ready to work

To make a homemade potato mower, it is recommended to prepare drawings, appropriate materials and tools. If you do not have an angle grinder and welding inverter, you can rent them. angle grinder is needed for grinding irregular joints, and a welding inverter can be used to join the individual elements together as efficiently as possible.

As the main handle of the hollow tube of the required diameter and length, which will depend on the height of a person, is used. The best option is to use a water pipe with a diameter of 1 inch. One metre of pipe is often sufficient. For front and rear linkage it is better to use ¾” tubing.

In the process of making an okrug it is necessary to bend and solder the pipes to each other, so it is necessary to prepare a special device. But in the absence of such, you can use an ordinary gas burner, over which the material is first heated and then bent at a certain angle.

You will also need to find a turnbuckle of the screw type, which is able to connect the front link and the vertical plow post. Instead of it you can use a piece of steel plate, in which a few holes are drilled beforehand in order to adjust the angle of inclination of the homemade machine in the future.

See also  Vibratory plate with gasoline engine

For mouldboard making it is recommended to use 2mm thick steel sheet fragments. Thinner steel is not recommended, as it will warp after a while and you will have to rebuild the attachment.

To understand how to make an arrow for potatoes with your own hands, you need to become more familiar with a specific drawing and understand the principle of connecting all the components of the unit.

Potatoes, commonly called the second loaf, are one of the most important crops in Russia. Potato tubers are widely used in cooking, and potato starch is used in the textile, food and paper industries.

This is a kind of crop that takes a lot of time, effort and energy. Potatoes need to be hoeed several times during the growing season. Loosening the soil improves air exchange. The oxygen in the ground has a positive effect on the growth and development of the crop. According to feedback from experienced farmers, yields can increase by 40-60%.

The first mowing should be done when the first shoots appear. The average height of the shoots is 5-7 cm. The procedure should be repeated when the potato bushes have grown to 20-23 cm. After every rain or watering loosen the soil. Earth crust caused by water prevents oxygen from reaching the roots growing in the soil.

Many gardeners act the old-fashioned way, using a hoe to hoe the potato bushes. In order to speed up the process of loosening the soil, it is recommended to use a manual hoe.

Tips for using the equipment

After assembling the equipment yourself, it is necessary to conduct a trial run with it on the plot. Its qualitative work depends on many factors: soil conditions, weather conditions, correct adjustment and sharpening of working elements and many other factors.

All adjustments of the self-made device are made by experimenting. To do this, it is desirable to first walk on a regular patch of soil and adjust the optimum value of angles and depth of penetration into the soil of the working surfaces of the dipstick.

It is also equally important to determine the optimum speed of the machine. This will have a positive impact on quality, because at higher speeds, the implement will tend to spread the soil around, making furrow formation worse.

In our country, the potato is considered “second loaf”, so with the beginning of the new spring season, many gardeners strive to plant this useful product on their plot. But the process of obtaining a good harvest depends not only on planting, but also on further care (weeding, hoeing) of this root crop.

Maintaining potatoes by hand is considered to be laborious and time-consuming work. Therefore, the use of a power tiller with special attachment type equipment is becoming increasingly popular among gardeners.

Make a hinged equipment, not inferior to industrial counterparts, you can independently, with a small financial investment.

After completing the self-assembly of the planter, the most important thing is to test work with it on the vegetable garden. Successful manufacture does not yet guarantee quality work, because it depends on a combination of many factors. weather conditions, soil conditions, the correct sharpening of the elements of the planter, etc.д.

Before you start plowing, you need to go over a regular patch of land. During the work, you will feel the correct operation of the tool, you will be able to adjust the optimum depth and angle of entry into the soil.

Another important factor is the speed at which you work on the hill. A good pace of work can be just as important as having a mucker, because at higher speeds, you will simply toss the soil around without actually doing the mucking.

Materials needed

Before proceeding to the breakdown of this or that method of making an independent mower, we need to list the minimum list of things that we will definitely need in the course of work.

KAMAZ 65115 is one of the oldest series of this plant, production of which started in 1998. Here are all its technical specifications.

One of these oldest companies is Vogele, which produces a wide range of paver models. Vogele asphalt pavers are German quality and commitment to progress.

The T 70 wheeled tractor is the brainchild of the Chisinau Tractor Plant. Follow this link for all the information on this tractor.

Of course, nobody makes us retrain as blacksmith to forge all the necessary parts by the ancient method, which was used a few decades ago. But a rudimentary list of welding and locksmithing equipment we will still need:

  • Welding machine (preferably, this machine should be designed for arc welding).
  • angle grinder with a set of different disks and bits.
  • An electric drill with a set of reliable drill bits.
  • Electric emery machine.
  • A gas burner, which is necessary for heating the metal during hardening.
  • Vise or workbench.
  • Various files and other supplies (screws and other fasteners).
See also  How to adjust the valve on a walk -behind tractor. Valves adjustment on the AGRO Motoboblock Procedure Procedure

This list relates directly to the tools we need. In addition, you will need the material, from which the self-assembly will be made, but we will talk about this in more detail in the process of describing the ways of making riders.

Making our own ouchers

Of course, the manufacture of the mower can not be called a simple thing. You will need the ability to carry out welding and locksmith work. But it will allow you to save quite a decent amount of money and make a device that is most convenient for the user.

To carry out the work, you may need the following tools:

  • Arc welder.
  • An electric drill with a set of heavy-duty drills of various diameters.
  • angle grinder and a few bits and discs in the kit.
  • An electric sledgehammer.
  • Gas burner, designed for heating the metal during its hardening.
  • A workbench with a vice.
  • Various files.
  • Consumable fasteners (bolts, nuts, rivets).

Production of a lister-type cutterbar

To make such a device it is necessary to cut two identical parts from a sheet of steel 2 mm thick. Then it is necessary to bend these plates so that the bending radii coincide. After that, these surfaces are welded and the seams are processed to get a perfectly flat plane. The quality of scraping significantly affects the easy running of the device and the absence of clogging with soil of bad joints.

Particular attention should be paid to the strength of the tool stand, because it bears the brunt of the work of the device.

If we make two of these devices and connect them in a peculiar way, we will get a device for two-row tillage.

If you make such a device with an adjustable system of wings, based on the articulated joint and installing movable rods at the end of the device to adjust the angle of the structure, you get an adjustable two-row ridger.

Disc coulter for power tillers

The disk device can be made from readily available material, which will greatly reduce its cost.

The basic steps of making a disk device:

  • Cut two circular disks from 2 mm thick steel sheet and sharpen their edges to reduce the resistance during plunge cuts into the ground.
  • Using a hammer we make a bend in the elements: one side should be concave, the other is obtained convex. This disc shape rakes the soil better and covers the plants.
  • Using special fastening bolts and welding fasten the legs, turnbuckles and the T-shaped leash.
  • Connect the wheels of the disc device with adapters.
  • The distance between the discs is the same as the row spacing.
  • Vertical swivel angle of discs is achieved by means of a turnbuckle.
  • Then the entire device through the leash is attached to the motoblock bracket with bolts and locking elements.

Propeller-type tillers

Devices, reminiscent of a home fan, use progressive and rotary motion in tillage. But the tool can be installed on a machine with a twin-shaft engine, which has reverse and 2 gears. There should be a power take-off shaft. Propeller weeder is more effective than other models, but is expensive because of its complexity. Folk craftsmen got the idea, but the tool doesn’t look like a propeller very much.

To make it, you will need quality steel, a welding machine and an angle grinder. Propeller” parts are welded to the axles that are adapted to the frame. In one pass the soil is deeply loosened and thrown into the ridge. The tiller for the power tiller is made non-adjustable, so the angles need to be set experimentally.

Designing your own weeder

Of course, making an earplug is not something to be taken lightly. Skills in welding and fitter’s work are required here. But it will allow you to save a pretty decent amount of money and make the device most convenient for the user.

You may need the following tools to do the work:

  • Electric arc welder.
  • Electric drill with a set of reliable drill bits of different diameters.
  • angle grinder and a set of tools and disks.
  • An electric sinter.
  • A gas torch to heat the metal when hardening it.
  • Workbench with vise.
  • Various files.
  • Consumable fasteners (bolts, nuts, rivets).

Making a lister-type rocker spud

To make such a device it is necessary to cut two identical parts from a sheet of steel 2 mm thick. Then you need to bend these plates so that the bending radii coincide. After that, these surfaces are welded and the seams are processed to obtain a perfectly flat plane. The quality of scraping significantly affects the easy running of the device and the absence of clogging of bad joints with soil.

See also  What kind of petrol to put in a caiman single axle tractor

Particular attention should be paid to the strength of the buttstock, because it bears the main load during the operation of the device.

If we make two such devices and connect them in a peculiar way, we get a device for two-row cultivation.

If we make such a device with adjustable system of wings, based on the articulated joint, and installing movable rods at the end of the device, which regulate the angle of inclination of the structure, we get an adjustable two-row ridger.

The disk eradicator for the tiller

Making a disc device can be made with improvised material, which will significantly reduce its cost.

The basic steps of making a disc device:

  • Cut two circular disks from 2 mm thick steel sheet and sharpen their edges to reduce the resistance when digging into the soil.
  • With a hammer, make a bend in the elements: one side should be concave, the other is convex. This disc shape rakes the soil better and covers the plants.
  • We use special fastening bolts and welding to connect the tines, turnbuckles and the T-shaped lever.
  • Wheels of the disk device are connected by adapters.
  • The distance between the discs is the same as the row spacing.
  • The discs can be swivelled vertically by means of the turnbuckle.
  • Then the entire device through the leash is attached to the motorblock bracket with bolts and locking elements.

Block: 3/4 | Number of characters: 2536

Tips for operating the equipment

After self-assembly of the equipment is necessary to conduct a trial run with it on the site. Its qualitative work depends on many factors: soil conditions, weather conditions, correct adjustment and sharpening of working elements and many other factors.

make, disc, single, axle, tractor

All adjustments for the self-constructed device are made by experimenting. To do this, it is advisable to first walk on a regular patch of soil and adjust the optimum value of the angles and depth of entry into the soil of the working surfaces of the dipstick.

And just as important is to determine the optimal speed of the machine. The right pace of work has a positive impact on the quality of ducking, because at high speed the device will mainly scatter the soil in different directions, thus worsening the process of formation of furrows.

In our country potatoes are considered as “the second loaf”, so with the beginning of the new spring season, many dacha owners want to plant this useful product on their plot. However, the process of obtaining a good harvest depends largely not only on planting, but also on further care (weeding, dipping) of this root crop.

Manually tilling potatoes is considered to be a laborious and time-consuming job. That is why the use of a power tiller with special attachment type equipment is becoming more and more popular among gardeners.

Make hinged equipment, not inferior to industrial counterparts, can be made by yourself, with a small material investment.

Devices for mowing from improvised means

It should be noted that this self-made mower can be made without investing in the purchase of iron. This will give an opportunity to reduce the cost of the tool to a minimum. As a starting material, it is acceptable to use a suitable size iron product. For example, an unnecessary lid from an old pot.

The main thing, using such an approach to the case, remember about the drawings and the required disc diameter. It can be no less than 400 millimeters. This is due to the nuances of the cultivation of the soil, taking into account the area of the roots of potatoes, planting depth and ground clearance. Basically, the maximum depth of planting is equal to 60-80 millimeters, the length of the roots. up to 200 millimeters. The lid is ground on all sides, slightly transformed by bending and mounted on a single axle tractor.

| Denial of responsibility | Contacts |RSS