How to make a lawn mower a chain from a chainsaw. Replacing fishing line on a trimmer or motorcycle

make, lawn, mower, chain, chainsaw, fishing

How to replace a fishing line for a trimmer for grass for grass with a chain from a chainsaw: We increase the effectiveness of the tool

In general, in my video, I talk about construction in “One helmet”. I do everything myself. One head and 2 hands. The main directions are construction and repair with your own hands, but I also talk about the garden and garden, crafts and useful things for the house.

At the moment, I am actively engaged in the decoration and arrangement of my house from SIP panels, which is located in the region.

I record all the stages of construction on the video, sharing my experience and my thoughts. Almost all work I do the first time.

I do everything for my pleasure, which I wish you!

Trimmer fishing line and a trimmer for grass: how to make the right choice

Fishing line for a trimmer for grass

The main aspect of a fishing line for a trimmer for grass is its diameter. How to make a trimmer for grass with your own hands from a corner grinder, (starter). As in the next figure. It can be 3.2, 3, 2.4, 2 or 1.6 mm. How to do it with and how to replace a fishing line for a trimmer. Horror story on an eternal theme. The thicker the fishing line is for a trimmer, the more thick plants can be mowed with motorcycles. popular and all.fought fishing diameter

make, lawn, mower, chain, chainsaw, fishing

The thickness of the fishing line must meet the power of the engine of the trimmer for grass and approach the parameters to your model Motokos. For a low power unit, a fishing line diameter is 1.3-1.6 mm, and for a device designed to work with soft and hard vegetation. 1.8-2 mm.

If you do not know which diameter to choose, before purchasing, read the product passport. There the manufacturer indicates the optimal value of the diameter of the fishing line.

How to make a trimmer for a chain of chain grass

I welcome all lovers to pattern, today we will consider how to make a powerful lawn mower from an electric trimmer for grass and chainsaw. The author had an electric trimmer for grass, which did not want to mow, there was not enough engine power in the thick grass. It was decided to make a home.made homemade. Of course, there is a meaning in such an alteration only if you have a workshop with the necessary equipment, as well as more details. The tool turned out to be quite powerful, thick grass of a braid for grass mows perfectly. If the project interested you, I propose to study it in more detail!

Materials and tools used by the author:

List of materials:. spare parts from a trimmer for grass;. iron pipe and bearings;. chainsaw;. handle for engine control (from trimmer for grass);. sheet iron;. bolts and nuts.

Step one. The manufacture of the rod of the lawn municipality will make a bar in which the shaft of the lawn mower will rotate. In cheap benzocoses in the rod there are special bushings that hold the shaft. Of course, these bushings wear out quite quickly, and the shaft begins to throw inside the bar. The author decided to make the bar himself, for this we will need a pipe of suitable diameter, you need to press the bearings in it.

As a result, at the end of the pipe we install a gearbox for the lawn mower and at this step the work is over.

[center] [center] [center] [center]

Step two. Clothenedale we need to dock the working shaft of braids for grass with a chainsaw shaft. First of all, we need to cut a cup of clutch of the lawn mower, as a result, there should be one plate. To give the plate a perfectly round shape, the author uses a drilling machine.

At the next stage, it is necessary to make an adapter that will allow you to cling to the asterisk of the chainsaw. The author makes this adapter himself from the thick iron plate. We transfer the sprout contour to the workpiece by painting and proceed to work. Sprinkle the core and other areas on the drilling machine. Well, then we arm ourselves with a file and finalize the part. At the end, we will have to cut the part to a round shape and weld to the plate that remains of the clutch cup.

Preparatory work: fixing washer processing

Using the ruler, we mark a straight line for a trimmer on a concave puck along the diameter and clamp it in a vice of one of the sections up.

It is better to outline the place of drilling with Kern so that the drill does not slip. We make holes on both sides, first thin, and then a larger drill. the diameter should be such that the chain is calmly passing.

How to replace

First you need to carry out preparatory work: process a fixing washer. Using the ruler, it is necessary to measure the straight line for the trimmer along the diameter of the washer, and then squeeze it in the grip of the received marks up.

It is recommended to indicate a point in advance in advance, where then it will be necessary to drill in order to prevent the drill slip. Make small holes on both sides, and then, using a thicker drill, increase these holes for the better passage of the chain.

make, lawn, mower, chain, chainsaw, fishing

The chain from the chainsaw should be installed so that it does not interfere with the leading axis of the tool. You need to insert it into the holes made, laying on the inside of the puck. The length of the chain should be equal to the distance to the puck, so that during the working trimmer for the grass, do not destroy the casing. From the inner wall of the washer, it is good to weld a chain to it.

The preparation is completed on this. Next, you need to connect the made material to the trimmer, tightening the nut.

Working with a trimmer, it is important to remember your own safety precautions. In addition to the above cases, it is also worth paying attention to the wreckage of felled bushes. Young shoots can fly in different directions with high speed and strength, so before work it is worthwhile to wear tight protective clothes, a mask, a headdress, gloves, gloves. Also, there should not be animals or children near.

How to replace

First you need to carry out preparatory work: process a fixing washer. Using the ruler, it is necessary to measure the straight line for the trimmer along the diameter of the washer, and then squeeze it in the grip of the received marks up.

It is recommended to indicate a point in advance in advance, where then it will be necessary to drill in order to prevent the drill slip. Make small holes on both sides, and then, using a thicker drill, increase these holes for the better passage of the chain.

The chain from the chainsaw should be installed so that it does not interfere with the leading axis of the tool. You need to insert it into the holes made, laying on the inside of the puck. The length of the chain should be equal to the distance to the puck, so that during the working trimmer for the grass, do not destroy the casing. From the inner wall of the washer, it is good to weld a chain to it.

The preparation is completed on this. Next, you need to connect the made material to the trimmer, tightening the nut.

Working with a trimmer, it is important to remember your own safety precautions. In addition to the above cases, it is also worth paying attention to the wreckage of felled bushes. Young shoots can fly in different directions with high speed and strength, so before work it is worthwhile to wear tight protective clothes, a mask, a headdress, gloves, gloves. Also, there should not be animals or children near.

Installation and fastening of the chain

We spread the chain through the holes, laying it along the inner wall of the washer so that it could not interfere with the leading axis of the trimmer for the grass.

At this stage, it is important to accurately measure the length of the chain from the ends to the puck. It should be the same and not exceed permissible sizes, otherwise the protective casing will be immediately destroyed. On the inside, we reliably weld the chain to the puck.

All is ready. We put a flat washer, our modernized puck and tighten it with a fixing nut on the axis of the trimmer for the grass.

Performing the above work, you should not only comply with the rules for using the power tool, but also not neglect personal protective equipment.

How to cut a bottle into a tape

Before proceeding with the manufacture of a home.made cord, you will need to prepare the material itself, namely the plastic tape of the required width and length. To dissolve the PET bottle on the tape, use various devices, the manufacturing algorithm of which can be found on the Internet. If you are going to mow large areas overgrown with grass, and you will need a lot of home-made cord, then, of course, it makes sense to make a more complex bottlecore from the corner or U-shaped aluminum profile. The process of manufacturing a bottle.cutter is shown in this video.

But if you are not interested in the mass production of a plastic tape, then from time to time to dissolve the bottle on the strips in a simple way.

  • Take a regular plug plug plug.
  • Cut it in half (but not to the end).

Thus, the entire plastic container will blossom into the tape of the same width.

A version of a bottle.cutter, which you will always have at hand, can be made from a conventional sharpener for pencils, preferably made of aluminum. In detail how to make it, shown in this video.

Simple Trick To Diagnose A Bad Ignition Module (Coil) On A Lawnmower, Chainsaw, Weedeater Etc.

The simplest home.made homemade

Below are different options for devices made of chainsaws. Everyone will be able to use such ideas in their own economy. From a chainsaw with a small number of additional materials, you can make:

Corner grinder. The main system of such a device is a bearing with a shaft. At one end, a driven pulley is installed, which rotates using a wedge belt. On the other, a mandrel is fixed for cutting circles. Depending on their brand, such an angular grinder can be cut stone, metal, brick and other building materials.

Ice Bour. For good operation of the device, the speed of the screw should not be large, so it is necessary to use a gearbox made in the form of a worm or wedge.rephid transmission. How to make it can be taken from a chainsaw or as well as a chain from it. How. Such a device can be used in the construction of the foundation from screw piles and for other earthworks.

The main problems of the chain of the chainsaw

Chainsaw users often face the problem of tensioning the saw chain. She either spontaneously weakens, or stretches and flies. As a rule, these troubles are caused by the breakdown of the unit. Therefore, before proceeding with the stretch of chain links, you should check and eliminate the possible causes that can lead to impaired adjustment.

The reasons that the chain on the chainsaw is stretched can be large loads or insufficient lubrication on the tire. Because of this, the saw overheats, the metal expands, the size of the saw element increases, and it flies from the tire. The flow of oil can be violated when the pump is broken, channel clogging, and a butter of an oil hose.

If you changed the chain on the chainsaw for a new one, then be prepared for the fact that during the period of the run.in it will be slightly stretched. It is only necessary to check the tension in time so that the element does not fly off the tire.

A chain made of poor.quality steel is also quickly exposed to stretching.

When worn by a driven or leading star, the effectiveness of adhesion to the links of the chain decreases, as a result of which the saw element flies. In this case, you will have to unscrew the chain drive and change the asterisk. Also, the saw canvas of the unit can fly due to its stretching or deformation of the tire.

If a chain weakens your chainsaw, then this malfunction can cause a failed tension mechanism.

NEVER BUY WEEDEATER STRING AGAIN!!!. WHO_TEE_WHO

Testing

The chain is not a fishing line for a trimmer- its effectiveness exceeded all expectations! She copes well not only with the shoots around the trees, but also with impassable thickets, including reeds and even thick corn stems.

Testing

The chain is not a fishing line for a trimmer- its effectiveness exceeded all expectations! She copes well not only with the shoots around the trees, but also with impassable thickets, including reeds and even thick corn stems.

The anterior chain tension device

Now let’s tell you how to install a chain in the presence of a front tension device.

  • Separate components of the chainsaw: engine block, circuit, tire, combined key are laid out on the surface covered with a soft rug.
  • As in the case of the side of the chain tensioning device, we bring the motor unit to the position vertically and unscrew the nuts. Now you can remove the cover of the chain star.
  • The device for tensioning the chain must be turned to the left in the way so that the clamping element moves back from the asterisk.
  • Next, we put on the chain on the tire, starting from the top of the tire.
  • We turn the chain so that the tire is completely located on top of it.
  • We check that the chain is located on the bus correctly. It should be located so that the teeth on the upper part of the tire are directed forward.
  • Next, take a chain and a tire, and put a chain on the asterisk, pushing the guide tire on the bolts with a bacter.
  • The lid of the star should be put back on the engine block and tighten the nuts by hand. Now the tire and the chain are fixed and the chain tension can be adjusted.
  • When turning the clamping screw to the right, chain links enter the tire groove.
  • Raise the top up, turn the clamping circuit screw a little more. As a result of this, the links should enter the groove.
  • Now it is necessary to tighten the nuts with a combined key.
  • Check the sagging of the chain and finding the chain in the groove.
  • Next, check if we have a chain. To do this, let go of the chain brake, pull the chain on the mowing fishing line (do not forget about protective gloves). If the chain does not move, then you need to unscrew the nuts again and repeat the above manipulations.
  • Saw prepared for work. It remains only to activate the brake of the chain.

A timely and correctly installed chain at the saw will help make the process of cutting wood with a quick and safe.

As it turned out, the finalization is inherently very simple, and if you had everything necessary, took 10-15 minutes, no more. You just need to have an idea of ​​how to get to a drill and welding machine.

The use of the chain from the chainsaw not only significantly increased the effectiveness of the tool, but also reduced the costs of its maintenance. in any case, I will no longer need a fishing line for a trimmer for a trimmer for grass.

Safety is above all!

Do not forget about safety measures when working with a trimmer! The fragments of the bushes fly over a long distance and with great force. Use personal protective equipment. a special mask, make sure there are no people and animals around.

| Denial of responsibility | Contacts |RSS