How to make a tile cut with your own hands.

Electric tile with water cooling with your own hands

Many of us, ordinary home masters, are ready to take on serious repairs at home, but very often the lack of a working tool is an obstacle in this. It is clear that when it comes to electric screwdriver, the problem is not serious, since it can be found from friends and acquaintances. But what to do when you need to lay ceramic tiles-after all, a good tile cutter is not so easy to get! Today we will tell you several ways how to get out of this situation. We will analyze how to make a tile cut with your own hands.

You can collect homemade tiles, but this is far from always required, because the process of assembling itself will take a lot of time from you and will also require a certain tool. For example, to make a strong bed, you will not be without a welding machine, which already imposes certain difficulties.

Working with tiles made of ceramics, you need to understand that it will not work to avoid its cutting

Therefore, for starters, we will tell you what you can work with when laying tiles without expensive equipment, and without which it will not work out without any way.

    One of the simplest devices is classic glass cutter. He copes only with thin ceramic wall tiles. As an option, it can be used, but there is a more interesting and convenient solution for the same money. Glass cutter can be used for cutting tiles Types of manual glass cutters

Tile glass cutting cutting this metal pencil or a winning devil perfectly cuts out the glazed surface of ceramic tiles. In addition to it, you need a good metal guide (ruler) and a tile breaking device.

Metal devil with a winning tip for breaking tiles is taken to the kit for previous tools. They easily and comfortably break the tile along the line made. Tile plumbing

Tile cutting scheme using glass cutter, matches and forceps

Even if you can assemble homemade tiles, without electric abrasive cutting, laying tiles is almost impossible.

  • Firstly, when passing window and doorways at the corners, it is necessary to make Mr.
  • Secondly, today in the bathrooms put out sockets, hoods and other equipment, under which you need to make holes in the tile. You can perform them with a corner grinding or use an electric drill with nozzles of ceramics.
  • Thirdly, porcelain tile is mainly placed on the floor today, and it is very difficult to cut it with manual tiles, even professional.

When laying tiles, you can not do without electric abrasive cutting how to cut the tile of a corner grinder?

Types of tiles and their design features

There are two types of tiles: mechanical and electric. The first is a manual device, the second can be both manual and stationary in the form of a small machine. There is a significant difference in them. This is a cutting tool. In its first functions, a wheel alloy wheel performs, on the edges of which diamond crumbs are sprayed. Therefore, manual mechanical tile cutter in its characteristics resembles glass cutter. In an electrical model, the function of the cutting tool is performed by a disk, the edges of which are also trimmed with a diamond layer.

The first in terms of price is a cheap device, the second expensive, so it is usually used by professionals who perform a large amount of tile work. It must be added that the operational resource of the disk is several times larger than the wheel. But since they are not used by manual tiles as often as electric, it will last a long time. In both models, cutting tools can be easily replaced with new ones, which involves the long operation of the devices themselves.

Now to the question of how to use a tile cutter. It is necessary to consider both options so that the nuances of the operations are understood, because in both cases they differ from each other.

Production algorithm

If there is all the necessary materials at hand, then everything will be quite simple to do everything yourself. For fastening it is better to use a workbench with a large working surface. If one is not at the disposal, then it can be boiled from metal. Two metal sheets are perfect as the base, between which the gutter will be located.

If you have not done such work before, it is better to make drawings in advance. This will allow the work quickly and better.

The manufacture of the tool occurs in the following sequence.

  • A special mount is fixed on the workbench, with which the tool will hold.
  • Metal plates are installed on the working surface with the help of metal corners, between which 1 centimeter is left.
  • From the side of the working surface a mobile limiter is installed. With it, you will move the tile along the work surface, and he will also not allow her to move aside when cutting.
  • Lastly, an angular grinder is installed, which is fixed using a latch and clamps.
See also  How to lubricate the punch Bosch. What manufacturers produce lubricant for the gearbox?

To make it more convenient to work with the tool, an angular grinder can be fixed on a mobile bracket. But this will be very difficult to implement due to a too complicated design, especially if you have no experience of performing such work.

There is another method of manufacturing, in which the angular grinder is attached under the table, it is simpler in implementation, but the convenience of equipment operation is preserved. For the manufacture of such a tool you will need a table with a large working surface, in the middle of which a hole is cut out. Its size should be enough for the disk can rotate freely. Next, the angular grinder is mounted using bolts. Two guides are fixed on the sides of it, along which the tiles will move during cutting.

The next video clearly demonstrates the process of manufacturing a tool for cutting tiles at home with a lower mount. Be sure to look at it, and you will succeed:

How to make a tile cut with your own hands: the necessary materials for the tool

As already noted, often for working with tiles, people use home.Made tile cutting, but before using it, it needs to be done. As practice shows, it is not as difficult as it might seem at first.

Consider what materials you need to take to make a cutter with your own hands for cutting ceramic tiles:

  • The metal sheet is used to create the base of the tile cutter. The desired thickness of such a sheet varies from 4 to 50 mm.
  • Corner grinder most often acts as a high roller for cutting ceramic tiles.
  • The diameter of the clamps should be at least 0.8 mm and no more than 10 mm. This is a prerequisite.
  • Nuts.
  • Ring.Ups.

With the help of this simple set, you can collect your own tile cutting at home at home. At the same time, get an electric tool equipped with water cooling. In this case, water is necessary in order to cool the disk of corner grinding, which always heats up when working to cut ceramic tiles. A similar type of cooling can be found in large saws serving for the cut of stones, for example, nephritis. In order to do everything correctly, the drawings of the tool with a description of each part are necessary and, preferably, with a detailed algorithm of the work itself.

How to choose an engine

If you are confident in yourself, then we start the process. For the manufacture of a tile cutter using an autonomous electric motor, you need to choose and mount a gearbox that helps install the necessary disk movement. From the technical side, this solution is quite complicated, so it is recommended to resort to another solution. To use a small angular grinder equipped with a manual regulation of the speed of the disk.

We make mechanical tile cutter

In order to make home.Made tile cutting, you need to prepare a platform on which the tile will be attached and the action is performed. You can make it from the board. The main flat surface without humps and depressions. The cutting element and guides will be mounted on the platform. As a cutting element, glass cutter with a removed head is mainly used, to which the blade is attached.

After the main details are collected, you need to find additional. If in your garage you have many spare parts from other devices, it will be easier to choose the rest. What will be needed:

  • Glue and rubber;
  • 2 small bearing and shaft for their work;
  • Steel tube with a shaft diameter;
  • Steel corners in size 20×20 (4pcs) and 40×40 (2pcs).

If you have a welding machine. Very good. If not, you can use the glue for metal. What is it for? In order to fasten the corners with each other and make a tile for a tile cutter with your own hands. In appearance, 2 P-shaped symmetrical details should be obtained. As you already understood, for this we need welding. You need to fix these spare parts on the platform so that the cutting element can move freely in the middle.

The tree is not particularly durable, therefore, metal strips are additionally installed on it, which are placed on hinges. In the middle, the board makes a recess that serves a groove for a cutting element. We need this groove so that during operation it is not to damage the platform with a glass cutter, which will fall below a little tile.

When everything that is described above is already ready to fix the blade. To do this, a steel tube is taken, to which the blade fixer is attached on one side, and on the other. The handle. The glass cutter blade is a diamond disk that takes to the tile on the platform when pressed on the handle. To create a cut, the handle must be carefully moved along the surface of the tile. Bearings are needed so that the mobile part of the device moves smoothly and smoothly. Check if the tile is assembled correctly. Lastly, the elastic bands should be attached along the edges of the board. The fact is that the tree slides, and the tile can move along the work surface. In order not to happen, rubber strips are attached. With your own hands, you can start operating with your own hands.

We make an electrical device

Electric tiles more perfect. Its cost is greater than mechanical, but it also works faster. In addition, it does not require the use of physical strength. The main thing is to observe all safety standards. The actions are on the principle of corner grinder, therefore, the basis can be used by such a tool. The purpose in this case is to correctly fix the angular grinder on the platform. If in the previous version a glass cutter with a diamond disk is attached to the platform, then in this, according to a similar principle, you need to fix the corner grinder.

make, tile, your, hands

The power of the corner grinder is much stronger than the physical strength of a person, respectively, the platform should be more powerful. If you have an old, but strong table at home, you can choose it as a platform. It will be much more difficult to transfer such a device than a mechanical. The platform is made with a groove in the middle. It is needed so that the disk does not cut the table when scrolling. In addition to the groove, you need to make limiters for tiles. During operation, the tile should not go aside, as an uneven incision will come out.

See also  How to change downshift on your power tiller

For an even corner grinder, it must be fixed on steel pipes. Between themselves, pipes are welded according to the type of fastening of steps on a stepladder. So you can adjust the height for different tile thicknesses. The last action. At the desired height, you should fix the ring in which the angular grinder will be clamped. It is advisable to fix the ring adjustable in diameter, to change the corner grinder. DIY tiles made of corner grinder are ready.

Option 1

The tile along the plank is served under the angular grinder strictly fixed under the table.

  • This technical solution is the simplest, since it involves reliable consolidation of the cutting disk from the bottom of the countertop and the installation of the guide rail (HP) with the possibility of its regulation;
  • Under the table you can put a bucket of water, which will slightly capture dust, and cool the disk.

What tool can you work with

You can collect homemade tiles, but this is far from always required, because the process of assembling itself will take a lot of time from you and will also require a certain tool. For example, to make a strong bed, you will not be without a welding machine, which already imposes certain difficulties.

Working with tiles made of ceramics, you need to understand that it will not work to avoid its cutting

Therefore, for starters, we will tell you what you can work with when laying tiles without expensive equipment, and without which it will not work out without any way.

    One of the simplest devices is classic glass cutter. He copes only with thin ceramic wall tiles. As an option, it can be used, but there is a more interesting and convenient solution for the same money.

Glass cutter can be used for cutting tiles

Types of manual glass cutters

Tile cutting glass cutter

Metal devil with a winning tip

3 ideas cut tiles

Tile plumbing

Tile cutting scheme using glass cutter, matches and forceps

Even if you can assemble homemade tiles, without electric abrasive cutting, laying tiles is almost impossible.

  • Firstly, when passing window and doorways at the corners, it is necessary to make Mr.
  • Secondly, today in the bathrooms put out sockets, hoods and other equipment, under which you need to make holes in the tile. You can perform them with a corner grinding or use an electric drill with nozzles of ceramics.
  • Thirdly, porcelain tile is mainly on the floor today, and it is very difficult to cut it with manual tiles, even professional.

When laying tiles, you can not do without electric abrasive cutting

Step.By.Step instructions for creating a tile cutter with your own hands

Many of us, ordinary home masters, are ready to take on serious repairs at home, but very often the lack of a working tool is an obstacle in this. It is clear that when it comes to electric screwdriver, the problem is not serious, since it can be found from friends and acquaintances. But what to do when you need to lay ceramic tiles-after all, a good tile cutter is not so easy to get! Today we will tell you several ways how to get out of this situation. We will analyze how to make a tile cut with your own hands.

DIY tiles

Additional upgrade

The tool can be supplemented with a dust collector. To do this, on the underside of the textolite base, a stroke is made about 4 cm wide and 1 cm deep. It begins next to the edge of the cutting circle, ends on the opposite side of the base, a few centimeters to the edge. A hole with a diameter of 3-4 cm is drilled in this place. A metal plate with a hole with a hole is mounted on top of it with the help of screws, which is welded by an adapter 4-5 cm long, cut off from a metal pipe. The diameter of the pipe is equal to the inner diameter of the duct of the vacuum cleaner, which is put on the adapter. Now, when the vacuum cleaner is turned on, all dust will be sucked out of the work area.

You can make the simplest guide device for a tile cutter, due to which the accuracy and quality of the resulting cut will increase significantly. For this, a metal plaster rule is used the required length. It is fixed using clamp on the tile (two.Sided construction tape is also suitable) at the right distance to the cutting line. Resting on the smooth edge of the rule, the tile cutting moves along it and makes a perfectly straight section.

We make a table of tile cutter

In order for ceramics to be supplied smoothly under the disk, you need to make a smooth countertop. In addition, it should be strong enough to reliably fix the cutting tool. Therefore, experts advise using a hard steel frame from the corners to perform a countertop. All parts must be connected by electric welding. Then we adjust the countertop under the finished frame. For this, sheet steel is suitable with a height of 0.5-0.6 cm. On it, make a slot under a saw of saws with excess 0.2-0.3 cm.

See also  How to make a shoal car for a walk -behind tractor. Spring

Note! To protect yourself during work, mount a corner grinder so that its disk does not protrude more than half.

Under the countertop, in the continuation of the gap or parallel, she needs to weld a steel profile with a size of 0.40.6 cm or a steel strip 0.4-, 0.5 cm thick. Grinder will be attached to them later.

On the device table, install the driving bar parallel to the grinder in order to directly feed the tiles under the disk. To do this, make 2 parallel cracks to him at the distance of the grinder at the length of the length of the bar among themselves. NR will move along them. Its ends will be fixed by bolt hacks through the gap.

Install the corner grinding

You can fix Grinder to the bottom of the countertop in different ways. Make sure that the mount is hard and strong. This is important, because otherwise, when cutting the Grinder tile, it can jam in the slot of the countertop. Also, when installing a saw, consider the possibility:

To exclude the twisting of the bolt, the spring washer of the grover is placed under its head.

The puck of Grover

Also, the tile cutter is attached to the countertop with clamping clamps made of strip steel made according to the drawing of the table. For laying between the “body” of the file and the table use wood bars. They should be made in the form of a corner grinder.

make, tile, your, hands

How to cool homemade tile cutter

There is a water cooling system on the factory electric stove.Cutters. Its design is affected by the arrangement of the Greener, that is, it can be above the table or under it. At home, making an electric tile with water cooling of this type is extremely difficult, and it is pointless. To cool the diamond disk, there is enough banal air blowing.

It is also important to remember that a corner grinder cannot work if a humidity indicator is more than 85 percent. Based on this, we can assume that the file cannot be wetted.

What is required for the manufacture of a home.Made tool

The electric device is much more expensive in manufacturing than mechanical, but it is more convenient to work with it, and the quality of cutting tiles will be much higher. For its manufacture, the following will be needed:

  • Table or workbench
  • Corner grinder with a diamond disk;
  • Metal platform;
  • Two steel pipes;
  • Fasteners;
  • Clamps.

You can save on the equipment if you buy a cheap cutting element, but this is not recommended to do this, since the quality of the cut and productivity of the work depends on it.

Choosing an electric motor for a tile cutter

To make a tile cutter with your own hands using an independent electric motor, the selection and installation of the gearbox is required to manually install the necessary speed of the disk rotation. It is not easy to do this technically, so another solution is common-the use of a small corner grinder (a greenhouse for discs with a diameter of 115-125 mm) with a manual adjustment of rotation speeds.

The sequence of work is fast and easy

The assembly of the tile cutter should be carried out as follows: to the outer side of the corner of a larger size, it is necessary to weld smaller corners so that the bearing is moving between them without a backlash (but freely). So, you will get half the main part of the tile cutter. Make the second half symmetrically the first. Suppose that all stages have already been produced, and you have to install a cutting element of tile cutter. To do this, it is necessary to weld the handle and the holder for the cutting element to the steel tube, which can be either ordinary glass cutter or any pointed element with diamond spraying.

How to Use a Manual Tile Cutter Beginners Guide

The resulting design is put on the shaft, and the ends of the shaft are impressed into the bushings of the bearings. The cutting structure is assigned to one of the extreme provisions, and you have to fix the edges of the load.Bearing corners using electric welding. Immediately check the movement of the cutting element in the space formed between the loading corners. If there is no fluctuations and the passage does not cause difficulties, then the main part of the tile cutter is properly welded. It remains only to glue the rubber strips to its lower part and remove the chamfers from them. After the glue dries, it is necessary to fix this part on a wooden basis. Various constructive solutions are possible here. The main thing is that our metal part can move freely in an upright position and does not deviate along the horizon line. The simplest design consists of ordinary door loops fixed on both parts of the tile cutter. The disadvantage of this design is that it does not allow cutting tiles of different thicknesses. It is better to make the designs of loops adjustable in height.

| Denial of responsibility | Contacts |RSS