How to properly cut corners on baguettes. Outer Angle

How to cut a ceiling plinth: work with or without a tool

Any repair requires attention to the smallest detail. How well the finish is done determines the look of the room and its overall perception. To a large extent this applies to ceilings, which in most cases are not perfect, so to hide all the imperfections (their and the walls), many owners use ceiling skirting boards, which complete the room. If the installation of baguettes in straight areas is not particularly difficult, the joints of the elements in the corners require maximum accuracy. Therefore, many owners who are planning, or have already started the repair, are interested in how to cut the ceiling plinth, what tools can be used for this stage of the work.

The answer to the question of how to cut a ceiling plinth, depends on what material it is made of. Cutting is different, since baguettes have different density. Therefore, the first thing to consider is the most popular materials, and at the same time the peculiarities of their cutting.

Styrofoam

Such products have the lowest price, because the material is very unstable to mechanical influences. Styrofoam is easy to scratch, to damage by accidental impact. Pros. minimum weight, which simplifies gluing, easy processing, the ability to paint in any color.

This foam material consists of small granules, which are quite easily separated from each other. But they are the main disadvantage of such baguettes. They require a very sharp tool. Otherwise the skirting board might get crumbled and that is why it will be unsuitable for installation. This is true for both angular and straight cuts.

Styrofoam

This contender is more expensive, but it does not differ from the first candidate very much, since it is a “relative” of Styrofoam: it is produced from expanded polystyrene. This material also consists of small granule bubbles, but they stick together more densely. But also polystyrene foam will not tolerate not too sharp blade, it will also crumble. Therefore, the master needs to prepare not less sharp tools.

The main advantage of foam and polystyrene foam is their softness, which allows you to avoid gaps, tightly pressing the workpieces to each other and to the corners.

Extruded polystyrene foam

EPPS is made from the same raw materials as conventional polystyrene foam, but in this case use a different, more advanced technology. Ordinary EPS is produced by injecting steam through microgranules.

In order to obtain the extruded polystyrene foam, the particles are mixed at high temperature and the same pressure, and then foaming agent is added to the raw material. The size of granules in this material is much smaller (maximum 0.2 mm), as a result it is less crumbly and more durable. Very sharp tool for its cutting is not required, but bluntness of the cutting edge is also not welcome.

Polyvinyl chloride

Plastic baseboards (PVC) are another type of ceiling products. They are usually purchased for finishing bathrooms. If we consider the topic “How to cut a ceiling plinth”, in this case they are exceptions, because for their docking use special, ready-made corners.

Generally, these baseboards can be cut with a box cutter, a metal hacksaw, or a sharp kitchen tool. Since PVC products do not restore their shape due to the lack of elasticity, it is not recommended that they be pressed hard when they are cut.

Polyurethane

This is another representative of polymer products. It has a high density and lacks the disadvantages of previous competitors. It is easy to cut, so the tool must be sharp, but there are no maximum requirements for its sharpening. Baseboards made of polyurethane do not crumble, do not become deformed, and can withstand almost any pressure with honour.

Wood

This traditional material is cut with the usual carpentry tools: for example, a jigsaw, hand or electric. Work the cut with sandpaper or a file. Since such products are more expensive than other baseboards, when working requires accuracy. A serious mistake can be made easily, but there is no way to correct it. The consequence of negligence will be the purchase of a new baguette.

The ideal tool for cutting wooden workpieces would be an electric mitre saw. The biggest disadvantage of it is the high price, especially of high-quality models. On the other hand, buyers have the opportunity to find an inexpensive tool, which will decently cope with the work.

Chisel for baseboards: basic rules of use

Everyone will be able to understand how to cut the corners of the ceiling plinth. For the process to go smoothly, you should familiarize yourself in advance with the main ways to create beautiful and even blanks.

The main rule of work. the observance of the slope of the angles. If the baseboard is fixed to the right, the corner will be cut from the left side, and vice versa.

The chisel is a handy tool for fast processing of blanks

Polyurethane ceiling plinth: what is it, advantages and disadvantages, what it consists of, what kinds there are, how to choose, step-by-step installation of a molding, coloring, restoration methods, average cost. in our publication.

Cutting with a power wire: the inside corner

To get the right inside corner, it is easiest to use a professional tool. Of course, this can also be done without a joiner, but more effort would be required. Consider the sequence of operations for cutting the inner corner with a jigsaw.

The first thing to do. to determine the distance from the corner on the outside to the nearest wall. Next, it is necessary to mark the skirting board, thus preparing it for cutting. On the outer side of the tack you need to draw a line for the trimmer along the length of the measurement. It is worth remembering that in this case the upper part of the strip should extend slightly outside.

See also  Tools for wood turning work

After that you can start trimming. To do this, the ceiling plinth is placed in the cutting tool and pressed firmly against the wall. After cutting the first part, you can proceed to processing the counter element.

How to make a crossbow yourself

Undoubtedly, this joinery device, the most important tool if there is a question of how to cut the corner of the baseboard correctly. And, of course, when cutting the ceiling plinths of solid material can not do without it.

But what to do when you need it, but do not have it?? There is a way out. Make it your own hands.

properly, corners, baguettes, outer, angle

Advice! If your plans, a large amount of work with the installation of ceiling plinths, do not be lazy and make up this simple and indispensable tool yourself. Unfortunately, in construction stores mostly plastic tools are sold, but that’s not even the point, simply, their quality wants better. From my experience, I know that when cutting even the baguettes from foam plastic, such a tool does not hold more than one object. It is possible, of course, to buy a professional device, but its price is not small.

The device, which is not difficult to construct by yourself

First of all, determine the size of the future tool. The length can be selected on the basis of construction materials available, and height and width, based on the size of the products that will be cut on the tool.

If the skirting has a size of 10 cm, then, accordingly, the width with the height should be at least 10 cm. We, however, can recommend the following dimensions:

  • Length. at least 500 mm. This size of length allows you to expose and fix the product.
  • the width and height would be better to take 200 by 200 mm. With these dimensions you can cut the biggest skirting boards.

Once we have decided on the dimensions, let’s take the example of 500x200x200 mm, it is necessary to prepare the core elements of the future jigsaw:

  • The basis. a wide board, which serves as a lining. From the basis depends on the length and width of the crosshairs, so it should be done in the planned length and width, in our example is 500×200 mm. The recommended thickness is 25mm. The base must have strictly rectangular shapes. The quality of the cut corner depends on it.
  • guide boards. their task is to guide the hacksaw blade, according to the chosen angle. Prepare them must be the same length as the basis, the thickness, there is not so important, it is enough and 15 mm, but that the width should be calculated taking into account the thickness of the basis, in our case 25200 = 225 mm. Thus, we get the working area of the ruler 500x200x200 mm. Guiding boards should also have rectangular forms.

So, we have prepared the material, let’s start making our tool, instructions:

  • Using screws, we screw the guide boards to the ends of the base.
  • Using a protractor, mark corners. for ceiling baguettes, 45 and 90 degrees will suffice.
  • Using an angle piece, we draw lines from the marked points on the walls of the guide boards;
  • Carry out a saw cut along the marked lines.

That’s how from the material at hand, you can make a quality carpentry device with your own hands.

The result of our actions. no complications

Making corners using the chisel

If the walls and corners in the room are flat, you can use the power drill. In order to properly cut a corner, you should put a part inside the jig in which a person will make a cut, then insert the saw into the guides.

That way the piece will be held in place, and it will be possible to cut it at the right angle. For a good cut of the skirting board it must adhere to both surfaces at the same time, so it must be pressed against the wall of the wood chisel. Press the skirting board against the side that is closest to you.

You will need to cut a 45-degree angle with the jigsaw. First you need to determine how to position the baseboard in the jigsaw. To avoid confusion and cut correctly, place the right slat on the right and the left on the left.

Perform the work according to the following instructions:

  • Press the part that will be on the ceiling against the bottom of the jigsaw. The other side will be raised and come closer to you. It can be leaned against the wall of the tool so it won’t wobble when you’re sawing.
  • Determine the direction of the kerf as shown in this illustration, and then cut the corner.

Put it on the ceiling and check the geometry. If it’s not level enough, you can fix it a little with a knife, and in case of minor defects and wide gaps, you can use putty.

How famous events have affected the strawberry business?

Hi there. While we have Ukraine and famous events, we continue to grow strawberries in winter. Strange times, as the Chinese supposedly say: God forbid you live in an era of change. Although I don’t think the Chinese say “God forbid” But never mind. What’s up with our winter strawberry plantation? And what difficulties we encountered on our way as a strawberry growing business in winter. There are pros and cons.

First of all, let’s talk about the disadvantages. All went up in price. Pictured above is our new nursery, where we just energized the first rows. There will be two more stories on top, and there will be 5 such 4-story racks in total.

Light for plants we make ourselves, and here neatly on February 25, the supplier told us that he can take payment for components, but the rate of 100r per dollar. Arguments about the official exchange rate of 83r were ignored. What can we do? We took it with our teeth because the product is of high quality, but they still need to improve their management.

Now for fertilizers. also went up in price. And although we do not take such a significant role in our costs, it is still not very nice.

Although, mineral salts we now take domestic, whether Bui chemical plant or some Norwegian Yara, as Sergeant Hartmann said in the famous movie: “I do not have racial prejudice, you are all alone useless!”

See also  How to Properly Adjust a Chinese Chainsaw Carburetor

Sprouts! Has risen several times, because its price is tied to the euro. We have no nurseries for seedlings and people either do it themselves, or buy from farmers, or order from Europe.

From Europe is considered the most top. Because the quality is disproportionately higher. Here, of course, some may argue that we do it themselves quite well. But it’s one thing to multiply moustache in your own greenhouse, and another thing to refine the technology of production, including breeding and receive at the output virus-free seedlings, and even with a proven potential. So you know exactly how many grams of berries each bush will give you.

To understand our backlog in this industry is like comparing domestic astronautics to Cuban astronautics. Were the Cubans in space, they were, but that doesn’t mean they’re a space power.

Now, as for the berry itself and sales. We’ve been picking fresh strawberries for the 6th month in a row since October. They’ve built up a customer base over time. But they didn’t try very hard to expand it, and at a certain stage they even stopped advertising, because they couldn’t satisfy the flow of those who wanted to. We are going to expand our planting from 1000 to 3500 bushes by the fall.

But then they cut off our instagram. Of course it amused the slow-witted, “you fools are going to work at the factory, not take pictures of your ass”, but people with brains understand. It’s not all assholes and sponges on insta. A huge number of people earn through insta. Since it is essentially a showcase for your business. And this showcase will be visible exactly to key customers.

Most of our clients are private confectioners, cakes, chocolate covered strawberries. And you can feel it now, the drop in orders from them. Which means their orders are down as well. Personally, our content coverage is down 2/3. Blago at one time I began to develop a Telegram channel, where I talk about how I grow berries, but it is certainly not quite. Now, like a bunny on batteries, you need to promote TELEGA, YouTube, Rutube, contact, Zen, tic-toc, etc. etc. What were thinking those who blocked insta is not completely clear.

Now for the good. Sprouts. We were already planning to do sprouts for the spring, and in general the plan is to build a summer greenhouse and grow all year round. And considering that the good seedlings you can not find, and we always do as yourself, the abstraction of those who want not, especially given the fact that many were dragged from Europe or bought from resellers, and now with the euro, a bush sprouts moved much over 100r.

And even without all these price jumps, our region is so brazen and shrewd sellers that they are not afraid of a half-dead sick spotty bushes to ask from 80r per piece. So we master a new kind of activity. So far, not bad, but with the Insta would be much better.

How to cut a corner with a chair

Chisel. carpentry tool, with which you can cut any material at an angle of 45 and 90 degrees. The chisel can be made of wood, plastic or iron. Even the simplest device has holes for a hacksaw, more expensive models even have a rotating mechanism.

The principle of working with a wire cutter is extremely simple. Place the skirting board in the depression, press it down and cut through the side holes. As a result you get a cut at the right angle.

  • Measure.
  • Place the skirting board face up in the crevice of the mortar.
  • Press with your hand on the slat, but not too hard (if the skirting board is made of foam plastic, it is easy to break it).
  • Insert the hacksaw into the hole of the jigsaw at a 45 degree angle and make the cut
  • In a mirror reflection in the same way to cut the second piece. We receive the formed internal corner.

Tip! Cut the plinth can be a hacksaw for metal, but if the baguette is narrow, it is better to use a construction knife, with it the cut is more even.

Cut the outer corner just as easily. Step by step instructions:

  • On the underside of the skirting board, we mark the necessary length, but its edges should protrude a little.
  • We put the skirting at a 45 degree angle to the wall, and make the cut through the holes.
  • In a mirror image cut the second slat.
  • The prepared elements are placed on the wall. If everything is even, then glue, and if there are flaws, then simply remove them with a sharp knife.

If you have to work with a wire cutter for the first time, it is better to pre-practice on extra pieces.

Technology for cutting skirting boards for ceilings

In this article, we will look at the basic ways of how to cut the skirting boards on the ceiling, so that the finished result looks as neat as possible. In order to understand how to cut correctly, let’s understand what are ceiling plinths and what materials they are made of.

Materials

Tacks for the ceiling come in the following types:

    , But the most accessible material, which is becoming increasingly popular. Lack of strength in this case is not a disadvantage, because the skirting is out of reach and does not undergo mechanical stress It is also an inexpensive finishing material, but with a higher density than Styrofoam. Therefore, when cutting such products, you have to apply more effort. Despite the processing difficulties, the material can be cut with a sharp knife.

  • Wood is the most difficult material to work with. To install a wooden baseboard, it is best to use a hacksaw.
See also  Bosch 125 angle grinder with adjustable speed

Ceiling plinths are similar to decorative moldings. This element appears on the market under different names, such as batten and baguettes. Regardless of the choice of manufacturing materials, the ceiling plinth is an excellent solution for decorating the interior of the room. This construction element is mounted on one of the most difficult parts of the surface of walls and ceilings. at the junction.

If you know how to trim ceiling plinth in the corners, you can make an aesthetically pleasing interior design even if there are small reliefs on the wall surface. In addition, using a trimmer, you can hide mistakes made when installing a suspended ceiling, when wallpapering or when painting the walls.

Before proceeding to installation, it is necessary to determine how to cut the ceiling plinths. The main difficulty is to maintain the required angle when cutting. Because only then will the two skirting boards come together at the junction of the two walls and the ceiling without visible gaps.

Tip: If gaps form during installation of the fillets due to lack of experience, they can be sealed using baguette glue, silicone or sealant white with a similar consistency.

Cutting corners on two adjacent baseboards

So, let’s figure out how to trim the corners of ceiling plinth. There are several equally effective ways: cutting with and without a jigsaw.

A chisel is a plastic, wood or metal device that acts as a template to guide a hacksaw or knife to the desired angle.

Cutting with a wire cutter allows for maximum accuracy of the finished end.

How to cut a ceiling skirting board in the corners using a wire cutter

Machining parts without a template is possible, but only if you have sufficient skill, a particularly accurate eye and know at what angle to cut the ceiling plinth. If we decided to decorate a rectangular corner of the traditional for most private and apartment buildings, then the ends of both blanks are cut at an angle of 45 degrees, so that if the two parts are combined, a tight connection is formed without a visible gap.

Tip: Before you cut ceiling plinths, try making a few cuts on a test plank.

Cutting in the jigsaw

  • Take a wire cutter, which looks like a tray made of aluminum, plastic, or wood. Regardless of what this carpentry tool is made of, it should be used with extreme care. Inexperienced users can leave notches or blunt the cutting tool on the jigsaw.

On the sides of the tool we can see the gaps at the required angle. The gaps guide the blade of the cutting tool at the desired angle to the longitudinal axis of the tray.

  • Install the baseboard plank in the jig in the position in which it will be placed on the ceiling. Fix the part in the jigsaw so that the side that will later be pressed to the ceiling, tightly against the side of the tray.
  • Insert the cutting tool into the required gap and cut. For Styrofoam and cellular polystyrene a hacksaw for metal or a sharp knife with a long, unbending blade is used. For wooden skirting boards use a hacksaw with coarser serrations.
  • After one piece is cut, process the end of the adjacent skirting board and apply to the wall in a test pattern. If there are small gaps on the foam product (no more than 2 mm), straighten the end with a sharp knife. If the gap is visible at the junction of the wooden skirting boards, fit both ends, using sandpaper glued to a wooden bar.

If you have learned how to cut a ceiling plinth, it will be easy to understand that this is not a difficult process. But avoid excessive force when treating the ends of the fillets. The fact that, exerting mechanical action on the foam or styrofoam, you can significantly deform the decorative element. Styrofoam crumbles easily, while polystyrene squeezes through. By the way, even wooden elements can crack and split when sawn inexpertly and hurriedly.

Cutting without a chisel

It may turn out that there is no plough at hand, and how to trim the ceiling plinth in the corners in this case? There are three ways, using which you will achieve the best results.

A good eye and a little patience and an excellent result is ensured!

How to cut a ceiling skirting board properly. Important details

The measurements needed to trim the ceiling plinth should be done in a special way. To determine and mark the inside corner, the length must be measured from the corner. To mark the outer corner, it is necessarily taken into account that the baseboard will protrude into the interior of the room at a distance that is equal to its width.

properly, corners, baguettes, outer, angle

It is not desirable to fix the skirting boards until their exact position is verified and the mating skirting board is cut. Only after a perfect convergence in the corner of the two mating strips can you begin mounting and fastening them. If you work with polyurethane or wooden skirting boards, you can fix flaws and imperfections with a file or file. To fit the product of foam plastic, you should arm yourself with a sharp knife.

If even after finishing skirting boards left even a small gap, do not rush to upset. it is not difficult to patch with an ordinary putty. Cutting a ceiling plinth accurately and neatly is not that difficult. But to acquire at least a small skill, first try to practice on small blanks.

| Denial of responsibility | Contacts |RSS