How to put on a grass trimmer belt

Power charge with a belt for grass trimmer from China

grass, trimmer, belt

Mowing the grass is an extraordinarily heavy procedure. After treating an area of several square. meters, the back along with the hands begin to excruciatingly whine. The constant vibration of the machine, as well as the considerable weight has a negative effect on the joints. That’s why a gardener needs a special backpack-type device that distributes the weight of the equipment over the entire body. This is achieved through certain design features of the belts:

  • Wide shoulder straps on the foam rubber;
  • the suspension is designed for medium-powered gasoline mowers (size: 16×26 cm);
  • convenient back panel;
  • the fastening is simple, so it is quick and easy to unbuckle;
  • the waist belt is adjustable with a simple buckle.

This makes it very easy to securely fasten the appliance to your thighs. The resulting strain is also transferred to the shoulders. The balance thus created allows the gardener to work longer and with less effort.

Grass trimmer belt. How to adjust the satchel grass trimmer belt

Adjust the height of the grass trimmer’s shoulder strap hook by tightening the shoulder straps so that the grass trimmer’s blade which is lowered to the ground is parallel to the ground (perfectly horizontal). When working with the grass trimmer’s saw blade, adjust the height of the hook (by tightening the shoulder straps) so that the grass trimmer’s saw blade is tilted slightly forward relative to the ground.

By moving the grass trimmer’s hanging ear to the grass trimmer belt forward or backward, balance the grass trimmer so that when you release the handlebar, the grass trimmer blade is near the very surface of the area, but does not rest on the grass. For sawing shrubs and young trees with the brush cutter blade, the grass trimmer must be balanced so that the machine hangs horizontally on the hook when the handlebar is released. Attach.

Adjust the grass trimmer’s shoulder straps (harness straps ) so that the load is distributed evenly over the shoulders (check by pressing the grass trimmer suspension hook with your hand).

Husqvarna Grass Trimmer Backpack Belt Video. About the design features of the belt harness (harness) that make it easier and safer to mow with your Husqvarna brushcutter, trimmer, chainsaw, brush cutter. wide shoulder straps and elastic waist belt, quick release locks (carabiners) in case of fire or any other situation that requires you to quickly release the grass trimmer. On the versatility of belts for men and women.

These Husqvarna grass trimmer backpack belts (Balance 35/55, Balance X, Balance XT) can be used on any trimmer, brushcutter, power brushcutter, brush cutter, gasoline-powered brushcutter or other products.

How to start and adjust the engine gasoline trimmer for grass?

Consider starting the engine lawnmower (gasoline trimmer) on the example of Dolmar MS3340

To start a cold engine you need

Turn on the ignition with the switch on the handle

2.Move the choke shutter at the rear of the air cleaner housing to the closed position

Pump up the fuel with 5-8 presses on the silicone button on the bottom of the carburetor

Pull back the starter cord a little (about 10 centimeters) until it begins to resist

Then do one to four pulls until the engine fires

6.After about 10 seconds of starting the engine, return the choke to its original position

Warning! Do not put your elbow into the air cleaner housing when starting the engine.

There are two adjustment screws on the carburetor housing. The trimmer is originally set by the manufacturer in the optimal position for engine operation. the first one (on the photo below) is designed to regulate the fuel supply. It is strongly not recommended to touch it on your own.

The second screw (photo below) is for adjusting the idle speed. You can experiment with it in case of urgent need

PS Photos of the Dolmar and Kawashima 2-shoulder belt for lawn trimmers

EUROTEC RX27 gasoline grass trimmer

Engine capacity: 51,7cm3 Power output: 2,7kW Fuel tank capacity: 1L Fuel type: AI 92/95 Speed of rotation: up to 9000rpm Boom length: 155cm Weight: 7,5kg Professional balancing: Yes

How to Properly Put on a Grass Trimmer Belt

The main thing is to adjust the grass trimmer belt correctly so how to put on the mask. Adjust the height of the grass trimmer backpack strap hook by tightening the shoulder straps so that the grass trimmer blade lowered to the ground is placed parallel to the plot surface (strictly horizontal). When working with the blade of grass trimmer adjust the height of the hook (by pulling the shoulder straps) so that the grass trimmer saw blade is slightly inclined forward relative to the ground.

By moving the bow for hanging the grass trimmer forward or backward on the belt, balance the grass trimmer so that when you let go of the handlebar, the blade of the grass trimmer is near the very surface of the area, but does not lie on the grass. For sawing shrubs and young trees with the brush cutter blade, the grass trimmer needs to be balanced so that when you release the handlebar, the machine is hanging from the hook horizontally on the ground. Attach

Adjust the shoulder straps of the grass trimmer (harness straps ) so that the load is distributed moderately on the shoulders (check with your hand on the hook suspension grass trimmer).

DR Trimmer Mower 6.75 Premier. Belt Replace

Husqvarna Grass Trimmer Backpack Belt Video. On the design features of the belt suspension (harness) that simplify and make mowing with brushcutter, trimmer, petrol and brushcutters Husqvarna more safe. wide shoulder straps and elastic waist belt, quick unfasten locks (carbines) in case of fire or any other situation that requires a sharp release from the trimmer for grass. On the versatility of belts for guys and ladies.

These Husqvarna grass trimmer shoulder straps (Balance 35/55, Balance X, Balance XT) are compatible with all trimmers, brushcutters, brushcutters, electric grass trimmers, brush cutters and other products.

The right belt for a grass trimmer

There are grass trimmers that do not require additional devices. for example, lightweight battery-powered electric trimmers. Even a child can carry it and it fits snugly in your hand without tearing out. But in most cases, grass trimmers weigh between 6 and 9 pounds, and in order not to get tired of carrying them from place to place, you need a belt.

What else do you need a trimmer belt for??

1) For transporting grass trimmers. Carrying a grass trimmer to the cottage when you don’t have a car is tricky. If the equipment does not have a belt, you should sew at least a pouch with a shoulder strap. How to put on a grass trimmer belt correctly video. How to wear a trimmer belt for grass. How to put it on properly. How to Properly. This will lighten the load when transporting the grass trimmer.

2) For comfortable mowing. After all, if your hands get tired, you won’t want to mow weeds and overgrown lawns. And if you do want to, trembling with lethargy is a dangerous option.

3) For an ergonomic positioning of the grass trimmer in relation to your body. A correctly adjusted safety belt prevents lumbar injuries and strain on the muscles of the back.

4) For safety. Grass trimmer will be much safer if it is less likely to slip out of your hands when branches and tough vegetation hit the cutting head. When this happens, the grass trimmer, whether it’s a gasoline or electric mower, makes a sharp jerk, and the grass trimmer is literally ripped out of your hands.

It is for these reasons that many models of garden trimmers are equipped with straps. They are threaded through the shaft of the grass trimmer and attached over the shoulder of the operator. The belt helps balance the total weight of the grass trimmer and the operator, and you don’t have to compensate for the balance by extending your arms or putting one leg back.

How to put on a brushcutter correctly

REDVERG 5014460 shoulder strap for hanging the grass trimmer. With Thigh Guard. I bought a Champion grass trimmer belt.

REDVERG shoulder strap

How to put the belt on, how to balance the trimmer/bass trimmer and the user.

1) Find the place where the belt attaches to the grass trimmer shaft. How to Properly Put on a Grass Trimmer Belt. How to do it right. On many models designed for amateur gardeners, the hook, screw, or slot is located next to the ignition knob or toggle switch.

2) Squeeze the belt carabiner and hook it to the lug on the grass trimmer handle. Find a second hole for the strap and do the same.

3) Put the grass trimmer with the belt on your back so that the upper part of the belt goes over your left shoulder (for left-handed people. over the right shoulder).

4) Adjust the length of the strap so that the lever, which is responsible for mowing power and continuous mowing, is at a comfortable height with your arm slightly bent at the elbow. In terms of width you need to make sure you have at least 10-15 cm from your body to the grass trimmer.

5) Put your right hand on the lever and your left hand on the top panel. Wiggle the head of the grass trimmer, feel where the grass trimmer’s center of gravity is located. If your weight is still unbalanced and you have to bend over or use a lot of force to hold the device, try pulling the strap up or down 1-2 cm. Once you’ve got the strap completely sorted out, you get a feel for which trimmer position is the most comfortable

6) Stop trimming if you have lower back pain and pain in your hands. Re-adjust the belt.

How the strap for the grass trimmer should look like?

It’s no secret that grass trimmer straps are often just a sling with two carabiners, not adapted in any way for the convenience and comfort of the operator. Review on lawn mower shoulder strap bought for the grass trimmer Champion how to properly put on. Therefore, the belt can be bought in specialized stores of garden equipment, purchased online, or simply ordered in the nearest studio, which works with leather products.

See also  How to tuck the line for the trimmer in the trimmer for the grassforest

The best for the grass trimmer is a leather belt: it does not slip and fixes the equipment quite firmly, as well as leather is pleasant to the touch.

In the shoulder area, you can make a special quilted overlay, which will make the load on the shoulder less noticeable and reduce friction.

Remember that a properly selected belt for grass trimmer will significantly increase the comfort and speed of work with this garden equipment. And that means that your health, your mood, and your lawn will be in perfect order.

How to mow grass with a trimmer?

The main thing is to adjust the grass trimmer belt, so the drum with a fishing line on the ground did not wiggle.

Properly make a gasoline-oil mixture.

Do not use too thick lines. they take away speed and overload the grass trimmer.

Do not wind too much fishing line on the reel and do not over-wind it.

From time to time to stop and clean the basket

The cable of the grass trimmer and the gear transmission (if it has one) should be lubricated with grease.

Trimmer from the company Varyag mow according to the instructions:

Action 1. Fitting the cutting device.

Depending on the type of weeds we choose the cutting attachment: a line for soft grass, a knife for hard grass and small bushes. Unscrew the attachment nut of the cutting unit and mount the cutting attachment. How to put a collar on how to properly wear a trimmer strap for grass how to properly play. Tighten the nut. the mechanism is ready to work.

Note: some grass trimmers do not have interchangeable cutting tools, so the work they can begin immediately.

Action 2. Preparing the grass trimmer for work.

If the grass trimmer is electric. charge the battery or plug in the motor. If petrol. fill up the tank with fuel. Then, depending on the type of grass trimmer. adjust it on itself (top-motor. attached by the loop on the shoulder, backpack. by the shoulders, bottom-motor. take hold of the handles). Hold the grass trimmer above the grass so that the cutting mechanism is parallel to the area to be cut. Starting the engine.

Mow the grass with the trimmer in simple movements. It is important to remember that the cutting mechanism of the device rotates counterclockwise, so that the cut grass will fall on the already treated area. Action 1. from right to left in front of us (this is how we cut the top of the grass). Strap backpack for how to properly put on the form how to properly put the line on the grass trimmer. Second from left to right (this is how we remove grass residue).

It is better to divide a large working area into squares, and mow the grass on them, moving from one to another on the outside of each square.

When mowing grass on slopes it is best to mow from underneath, running parallel to the slope. Reach the edge, go back, go a bit higher and repeat the same route until the area is mowed.

For mowing grass in an area with trees it is better to use a line cutter and mow along the perimeter of the mowing area, going around the tree trunk.

When you have mown all the grass in the field, switch off the engine, remove the grass trimmer (for shoulder and knapsack devices), clean the cutting mechanism of grass residue.

Hanperal Padded Shoulder Harness for Yard Trimmer

Backpack mower belt with plastic protection

The belt of this model is used for the lawnmower. Thanks to the backpack design it distributes the load very well over the entire body. Plastic protection avoids inconvenience when working with the tool. You can always buy cheap backpack belt for brushcutter in our online store

The belt of this model is used for lawnmowers. Thanks to the backpack design, it distributes the load very well over the entire body. Plastic protection will avoid discomfort when working with the tool. You can always buy cheap backpack belt for brushcutter at spetsinstrument online store.

Delivery costs are paid by the buyer. Delivery is by Nova Post. Payment by cash on delivery or cashless payment. You can save money on delivery by cashless prepayment. The return of the goods is possible within 14 days from the date of purchase, provided that the product has not been used, not opened, preserved the trade dress, preserve the packaging. We supply invoices, delivery notes, tax invoice, VAT certificate for companies and organizations. Buy a product with VAT in the store Spetsinstrument you can provide registration documents of your company.

Backpack mower belt with plastic protection

38 (050) 336 88 83 38 (067) 326 45 96 38 (073) 169 79 55

Enter new password

Approximate delivery time 3 to 7 days

Enter your e-mail address.You can buy the item from the store specsinstrument by providing your company registration documents:

Adjust the height of the grass trimmer’s shoulder strap hook by tightening the shoulder straps so that the grass trimmer’s blade, when it is lowered to the ground, is parallel to the crop surface (strictly horizontal). When working with the grass trimmer saw blade, adjust the height of the hook (by tightening the shoulder straps) so that the grass trimmer saw blade is tilted slightly forward relative to the ground surface.

By moving the grass trimmer’s hanging ear to the grass trimmer belt forward or backward, balance the grass trimmer so that when you release the handlebar, the grass trimmer blade is near the very surface of the area, but not resting on the grass. For sawing bushes and young trees with the brush cutter saw blade, the grass trimmer must be balanced so that when you release the handlebar, the machine hangs on the hook horizontally to the ground.

Adjust the grass trimmer’s shoulder straps (harness straps) so that the load is distributed evenly over the shoulders (check by pressing the grass trimmer suspension hook with your hand).

Husqvarna Grass Trimmer Belt Video. About the design features of the harness that make mowing with Husqvarna brushcutter, trimmer, gasoline bar, brushcutter easier and safer. wide shoulder straps and elastic waist belt, quick-release locks (carabiners) in case of fire or any other situation requiring quick release from the grass trimmer. On the versatility of belts for men and women.

These Husqvarna grass trimmer backpack straps (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, petrol and brushcutters, brushcutters, electric grass trimmers, brush cutters, and more.

A lawn mower is a handy tool for mowing lawn or tall grass, if you balance it correctly. It’s not about balancing the cutting line or blades. You need to balance the working handle as well as the position of the gasoline lawnmower on the belt. Many gardeners don’t use a belt when working with a gasoline mower, so their arms and back get tired. You need to use a support belt for comfortable operation. Such belts come with professional petrol mowers. You have to buy an extra support belt for a Chinese gasoline-powered mower.

How to properly wear a shoulder strap for a grass trimmer

Unlike lawnmowers that precisely maintain a given height and allow you to handle large areas, grass trimmers are not able to provide a clear height cutting, but they are very maneuverable and allow you to cut grass in inaccessible places: under bushes and trees, benches, stairs, etc.д. Well, the shape of the surface for trimmers does not matter. These small assistants. not a bad addition to lawnmowers, as they are more adapted to bring the final order on the lawn.

Grass trimmers are easy enough to set up. At the end of the iron tube-boom is fixed cutting head, the main part of which is a plastic bobbin (bobbin) with a supply of special line inside.

Before work two pieces of line of a suitable length are pulled out of the bobbin and fixed. This is done manually, semi-automatically or automatically, depending on the model. When manually releasing the line:

If the trimmer uses an automatic line release, the filament supply is possible in 2 methods:

  • When the engine is running, they insensibly press the button on the reel to the ground;
  • with the engine off, press the button on the bobbin and immediately pull the whiskers of the line, the line comes out.

Automatic line release (when the line is released automatically when the tool is turned on or during operation) is the most uneconomical.

Reel with a protruding mustache is driven by a motor with a frequency of the order of 10000-12000 rpm. Under the action of centrifugal forces, the whiskers stretch into strings and are converted into sharp knives that move at a speed of about 26 m/s. Thus, a line of 1.6 mm cross section can overcome not only the soft lawn grass, but also the young shoots of raspberries and plums. Working width is in the range from 23 to 40 cm.

There are electronic, battery and gasoline grass trimmers. Electronic grass trimmers are lighter than gasoline (most of them weigh less than 2.5 kg), low-noise, environmentally friendly, turn on at the touch of a button. But moving when working with such a trimmer limits the power cord, and located below the motor increases the load on his hands.

Electronic grass trimmers with the lower position of the electric motor is small power (from 250 to 500 watts), bobbin (bobbin) with a line wound on it from 0.8 to 1.5 mm is attached directly to the shaft of the electric motor. They are lightweight and one-handed operation. Line release can be manual, semi-automatic or automatic.

Electronic grass trimmer with bottom-mounted motor (STIGA)

Try to avoid mowing with this type of trimmer in wet weather, after the rain or when dew is falling. The fact that the cooling of the motor occurs through slots in the plastic housing, through which the inside can get wet.

Do not use this trimmer for more than 10 minutes as it may cause the motor to overheat. Take breaks in the work.

There are trimmers for grass not only with the bottom, but also with the top location of the motor. Electronic grass trimmers with top mounted motor are equipped with more massive motors, some models may use as a cutting tool for iron cutter (knife) or plastic blades.

How to put on a brushcutter correctly

REDVERG 5014460 shoulder strap for hanging grass trimmer. With thigh protection. Bought for Champion grass trimmer

REDVERG shoulder strap

Here is a short video on mowing with a Benzotrimmer / chainsaw using the example of a trainee: how to put on the belt, how to balance the push on the shoulder, how to move the handle and the top of the head.

See also  How to rewind a trimmer line correctly on a STIHL grass trimmer

Top-mounted electric grass trimmer (STIGA)

With this grass trimmer, you can successfully tackle weeds and cut everything up to brushwood, burdocks and bushes. The line release is semi-automatic or manual and available in diameters from 1.6 to 2.4 mm.

The undoubted advantage of this category of trimmers is that now you can safely mow and wet grass, without fear of moisture on the electric motor. But you should never mow when it’s raining!

Cordless grass trimmers also have low noise, they are easy to start and stop, you can move freely on the lawn, but the disadvantages. low cutting ability, high weight (up to 4.5 kg) and short work time without recharging. from 15 to 30 minutes. That’s why they are not yet widely used.

Gasoline grass trimmers are widely used because of their autonomy, high power and productivity. These are the devices most often used by professionals in their work.

When using a gasoline trimmer (chain saw) does not need to worry about the availability of power outlets and the quality of mains voltage, fear of accidentally cutting the extension cord or crush them planting.

Lawnmowers differ from each other in terms of the layout (however, this also applies in part to electric trimmers):

  • power and engine type (two-stroke or four-stroke);
  • form of boom (straight or angle, one-piece or split)
  • the shape of the control handles (D, J or T-shaped);
  • cutting tool (trimmer head, circular blade).

STIHL four-cycle grass saws have the advantage that gasoline and oil are filled into the engine separately, just like in a car. No need for a two-stroke fuel mixture of gasoline and oil.

Mowing larger areas is better done with a straight cutter bar and T-handles that distribute the load more evenly on the hands. The engine preferably should have more power.

Working with a gasoline trimmer with T-handles (STIHL)

Many people, especially women, when choosing a trimmer for the grass lean in favor of powerful electric trimmers for fear of not being able to start the gasoline engine with a hand starter. But these worries can be put aside lately. American company MTD made a breakthrough by equipping their mowers with AST (Advanced Starting Technology) engines. It’s not just the well-known solutions. like an integrated decompressor or the injection of an enriched fuel mixture. AST-marked engines have a powerful spring attachment, whose energy helps start the engine without straining, even pulling the starter rope slowly.

Pulling the starter cord to start the lawnmower engine

When buying a grass trimmer it is necessary to determine in advance what tasks you want to solve with its help. Because working under bushes, edging lawns and flowerbeds, mowing grass around fences and much more places specific demands on your power tool. Your physical attributes will also influence the choice. The weight of the selected model depends on these. whether you need a backpack attachment or whether you can keep the grass trimmer in the weight all the time. And if more than one person is going to be working with the mower, you need a height adjustment.

Grass trimmer with straps and different backpack options (STIHL)

When comparing different trimmer models, the following indicators stand out: power; ease of starting the engine and feeding additional fishing line; convenient location of controls.

You can measure a grass trimmer’s efficiency in terms of its weight to power ratio. power per unit weight is desirable.

Pay special attention to ergonomic design, so that lawn care is not a hard labor. The more comfortable the handles or handles of the grass trimmer, the higher not only its controllability, but also safety. The carrying straps considerably reduce the strain on your hands while you work; the wide adjustable arm lets you extend the reach and if necessary, easily transport the trimmer in the trunk of the car.

Working with a trimmer

Manufacturers do not recommend working in sandals or barefoot as this can cause injury. Clothing and shoes for working with trimmers must reliably protect feet from damage.

No particular skill is required. just hold the trimmer correctly by both handles and move it evenly across the surface.

The filament (usually 1.3 to 1.6 mm) used to fill up grass trimmers is a special kind of filament. Fishing line is not suitable for this purpose.

Clean the grass trimmer after use. Clean the ventilation slots, cutting line and reel at regular intervals with a soft brush or dry cloth. Remove dirt from under the blade guard at regular intervals with a blunt object scraper.

Store the tool in a warm, dry place, protected from dust and dirt.

Adjust the height of the grass trimmer’s hook strap by adjusting the shoulder straps until the blade of the grass trimmer lowered to the ground is parallel to the ground (perfectly horizontal). When working with the saw blade of the grass trimmer, adjust the height of the hook (by tightening the shoulder straps) so that the saw blade of the grass trimmer is tilted slightly forward relative to the ground.

By moving the grass trimmer’s suspension lug forward or backward, balance the grass trimmer so that when you release the handlebar the grass trimmer blade is near the very surface of the area, but does not rest on the grass. For sawing bushes and young trees with the brushcutter saw blade, the grass trimmer should be balanced so that the machine hangs horizontally on the hook when you release the handlebar.

Adjust the grass trimmer shoulder straps (harness straps) so the weight is evenly distributed across the shoulders (check by pressing the grass trimmer suspension hook with your hand).

Husqvarna Grass Trimmer Belt Video. About the belt harness design features that make mowing with Husqvarna brushcutter, trimmer, chain saw, brush cutter easier and safer. wide shoulder straps and elastic waist belt, quick release latches (carabiners) in case of fire or any other situation requiring quick release from the grass trimmer. On the versatility of belts for men and women.

These Husqvarna grass trimmer backpack belts (Balance 35/55, Balance X, Balance XT) can be used on any trimmer, chain saw, brushcutter, power saw, brush cutter.

Colleagues, who regularly and repeatedly uses gasoline trimmers, advise how to pick up the length of the shoulder strap and the position of the handle.

I had an electric before, lightweight, I mowed without a care in the world. The only problem was, I had to watch the wire all the time so I wouldn’t accidentally mow it. This year the electric one has a gear jammed. Took a simple gasoline Chinese. (if anyone is interested patriot 3045). With the J-handle. Started mowing halfway through the section and got tired. Both my hands were always straining. The right hand gets tired more, t.к. I still have to press the gas. If I make the belt shorter, I can’t cut the grass short. But it turns out that I’m holding the trimmer in my hands by weight. The belt only saves from jerk (when accidentally catch the ground, and the grass trimmer is trying to escape). Spinning.whatever. I can’t find one that’s comfortable. In general, share the trick of how to properly adjust the length of the belt and the position of the handle.

Nothing will help you anymore. It’s a grass trimmer. Not ergonomic, designed for short work. I’ve tried five different ones. Bottom row trimmers have the disadvantages you described. I’ve concluded that the most convenient to use is a lawnmower with a straight shaft (inside) and horn handles. There’s good weight distribution, decent hand-arm vibration and larger cutting area. But even such a grass mower makes my shoulder ache from the belt the next day, and I’ve noticed that the knee joint of my left leg starts to hurt from the constant turning motion on this leg. I have a lot of mowing to do. Either one day from morning to evening, but two half-days are better. The scythe and health is easier. This year, on Vadim’s advice, I bought a Bosch ARM 34. Satisfied as an elephant.

I learn how to properly insert images. There’s just one thing I don’t understand. where the picture width (800 px) looks like. I’ve looked all over Yandex, and I can’t find the parameters.

You just have to look for the center of gravity of the grass trimmer. I use an Interskol shrub shearer, originally the belt was attached in the wrong place, the overhang was to one side, I had to hold it with my hands. I found the center of gravity, moved the belt there, adjusted its length and that’s it. The weight is now on my shoulder, I only control it with my hands.

How to set the shoulder strap on a grass trimmer

To cut grass in an area where there are trees, you’d better use a logging mechanism, and you need to mow bypassing the perimeter area, going around the tree around the trunk.

After mowing all the grass on the plot, you need to turn off the engine, remove the grass trimmer (for shoulder and morning attachments), clean the mechanism to cut the rest of the grass.

How to properly adjust the brush strap for yourself

Service center specialists often complain about consumers of garden equipment for the home, which at the stage of its assembly and the first start-up make mistakes and turn off the technique. Of course there’s a manual in the package, but it’s either written bluntly or read after an incorrect assembly, when unnecessary parts were found or, even worse, there was a breakdown. Meanwhile, there is nothing complicated about assembling household garden equipment. You just have to be careful. Here is an example of the assembly sequence of the STIHL FS 130 petrol chain saw, supplemented by illustrations in our instructions.

Begin installation by opening the box and checking the assembly. If everything is in place, we have to attach the handle to the rod with the motor, put on the belt, put on the protective cover and the cutting elements.

First you need to remove the handle and unscrew the thumb screw, which fixes the top of the support without losing the spring.

Insert the handle into the socket and secure it without overtightening. We will adjust the final position after the final assembly of the hedge trimmer.

Slide the adjusting handle of the unit over the handle tube and tighten the fixing bolt. For this purpose, a universal wrench is included.

All controls for the STIHL FS 130 petrol chain saw are located on the handle. This is the throttle lever, which has an accidental switch-on protection, and the switch-off lever, which is controlled by your thumb. On the D-handle version of the brushcutter the controls are on the shaft next to the engine.

Put plastic sheathing in place. If you plan to use only the knife, then we use a part of the body (in the picture it is colored orange) to work it.

See also  How to properly charge a fishing line into a grass trimmer

If you want to work with the cutting line, put a plastic skirt on the chain saw’s protective cover and put the line-cutting blade on it. Some versions of this model have a universal carrying bag or you can fit two different carrying bags. one for the line and one for the blade.

When moving the skirt over the cover, check that it is securely fastened. Sometimes you may need to secure this protection with another screw.

Now you need to put the line trimmer knife and secure it with the screw.

It remains to install the spool, pre-filling it with fishing line. The reel is screwed on the shaft (as in the picture) or secured with a special nut. Keep in mind that the thread on the shaft is usually left. How to Pour the Line into the Spool, read the instructions.

If you need a knife, put it in place of the reel. The knife is equipped with a protective cover to prevent it from sinking into the ground during operation. After installation, do not forget to scroll this cutting element and make sure there is no play.

And the last and easiest step. install the metal clamp on the rod, that is the attachment for the suspension strap.

Once the brush is assembled, put the shoulder strap or pendant on the backpack strap (depending on what’s included) and adjust them according to the illustration. Pour the gasoline mixture, start the engine. And go.

Grass trimmer strap How to adjust the grass trimmer backpack

Adjust the height of the grass trimmer belt hook tighten the shoulder straps so that the grass trimmer blade is lowered to the ground parallel to the platform surface (strictly horizontal). When working with the grass trimmer blade, adjust the height of the hook (by raising the shoulder straps) so that the grass trimmer blade is tilted slightly forward relative to the ground.

Hang the pigtails on the trimmer foot forward or backward by the ear, and balance the grass trimmer so that when you release the handlebar, the grass trimmer is at the platform surface, but not resting on the grass. To see bushes and young trees with the brush cutter, the grass trimmer must be balanced so that the machine hangs horizontally on the hook when the steering wheel is released. Attach.

Adjust the grass trimmer shoulder straps (harness) so that the load is evenly distributed across the shoulders (check manually by pressing on the grass trimmer suspension hook).

Husqvarna backpack trimmer video. About the design features of the harness (harness) that make mowing with a Husqvarna chainsaw, trimmer, chainsaw, pliers easier and easier. Wide straps and elastic belt, high-speed locks (carabiners) in case of fire or any other situation that requires a quick release from the counter. On the versatility of belts for men and women.

These Husqvarna backpack straps (Balance 35/55, Balance X, Balance XT) can be used on any trimmer, gasoline-powered braid, electric braid, brush cutter.

Distribute links:

Recent Комментарии и мнения владельцев

Teeth properly cleaned after meals

When to brush your teeth: before breakfast or after? Everyone probably knows that you should brush your teeth twice a day. Imagine a morning without

A look at how to brush your teeth

How to Brush Your Dog’s Teeth at Home Hi! I am Kulkova Nadezhda Petrovna, senior veterinarian, specialist in veterinary dentistry

See how to brush your pomegranates

How to clean a pomegranate. Description In hot and sunny Georgia, there is a custom: if a young man is in love with a girl,

How much does it cost to clean

Brush Your Teeth Properly. There are now general and individual recommendations for proper brushing of the teeth and mouth. And the question is, how long does it take to clean

The right belt for a grass trimmer

There are grass trimmers that do not require additional accessories. For example, lightweight electric grass trimmers with a battery. Even a child can carry them, and they lie firmly in their hand without breaking free. However, most trimmers weigh between 6 and 9 pounds, and you need a belt to keep you from getting tired of moving them from place to place.

1) Transport the grass trimmer. Transporting a grass trimmer to the cottage in the absence of a car is difficult. If there is no belt on the equipment, then at least a belt pouch should be stitched over your shoulder. This will make it easier to transport the grass trimmer.

2) For easy mowing. After all, if your arms are tired, you won’t want to mow weeds and overgrown lawns. And if you want, a handshake from fatigue is a dangerous option.

3) For an ergonomic position of the grass trimmer relative to the body. Properly secured and adjusted across the waist to protect against lumbar injuries and strain on back muscles.

4) For safety. The grass trimmer will be much safer if it is less likely to slip out of your hands when branches and hard vegetation hit the cutting head. When this happens, the grass trimmer, whether gasoline or duct tape, makes a sharp jerk and the grass trimmer literally “pulls” it out of your hands.

For these reasons, many garden trimmer models are equipped with straps. They are threaded through the grass trimmer shaft and mounted over the operator handle. The belt helps balance the total weight of the grass trimmer and the operator, and you don’t have to balance by extending your arms or pulling one leg back.

1) Find where the belt is attached to the grass trimmer shaft. Many models designed for amateur gardeners have a hook, screw or slot next to the ignition knob or toggle switch.

2) Press the carabiner strap and hook it onto the lug on the grass trimmer handle. Find the second strap hole and do the same thing.

3) Throw the grass trimmer with the belt on your back so that the top of the belt goes over your left shoulder (for people with a left hand. above the right).

4) Adjust the length of the belt so that the lever, which is responsible for mowing force and continuous mowing, is at a comfortable height with your arm slightly bent at the elbow. The width should be controlled to at least 10-15 cm from the body to the grass trimmer.

5) Put your right hand on the lever and your left hand on the. on the top panel. Move the grass trimmer head, feel where the center of gravity is next to the trimmer. If your weight is still out of balance and you need to bend over or are putting incredible effort to hold the device, try stretching the belt higher or lower by 1-2 cm. Once you have fully mastered the belt, you will feel the position with the trimmer most comfortable

6) Stop cutting grass if your back and arm hurt. Adjust the belt again.

What a trimmer belt should be like?

A leather strap is best for the grass trimmer: it doesn’t slip and holds the equipment fairly firmly in place, and the leather is pleasant to the touch.

In the shoulder area, you can make a special quilted cushion that makes the load on the shoulder less noticeable and reduces friction.

Remember that the right grass trimmer belt is important to increase comfort and speed with this garden equipment. This means that your health, your mood and your lawn will be just fine.

A lawn mower is a handy tool for mowing lawns or tall grass if you balance it correctly. It’s not about balancing the cutting line or blades. You need to balance the working handle as well as the position of the gasoline grasshopper on the belt. Many gardeners don’t use a belt when working with a gasoline mower, so their arms and back get tired. To work comfortably, you need to use a support belt. Such belts come with professional petrol mowers. For Chinese gasoline-driven mowers, the support belt must be purchased additionally.

There are two types of cutting attachments or cutters used in the construction of gasoline-powered mowers. These are the spools of fishing line, as well as steel or plastic discs. What’s the best choice for petrol-powered tools? The site presents information on how to choose discs and line for trimmers, as well as their types and design features. Let’s see briefly what kinds of cutting blades should be used on trimmers and power tools.

  • For mowing soft grass, a fishing line is used, which is wound on a drum or spool. Metal blades, as opposed to metal discs, are used where grass grows near trees, houses, fences and other obstacles. The line enables you to mow grass near obstacles without damaging the tool
  • Metal blades have 2, 3, 4 or more cutting parts to cut the coarse grass and bushes. Practice shows that the thicker the vegetation to be mowed, the more blades the cutter should have
  • Metal discs with 40-80 fine tines are used for mowing different kinds of vegetation. It can be rough grass, weeds, dense thickets, and even small trees. The higher the number of teeth on the cutting attachment, the better the performance of the tool in question
  • Plastic blades. mainly used on electric or battery-powered trimmers

The choice of blade depends on where the tool is used. If you plan to work in the countryside, choose a fishing line, and for cutting grass in the field or steppe, use discs with 3-4 blades or more, as well as discs with fine teeth.

What is a backpack belt

You should know that a tucked brushcutter weighs on average 6-9 kilograms. And this device has to be kept suspended at all times. In order to evenly distribute the load, the belt of the backpack as if encircling the body on all sides. The main load is on the shoulders and back, so the upper part of it is supplemented with wide foam inserts and fabric straps. The straps then drop down along the body and, using a quick-release clip, are connected to one another around the chest or belly. A wide and strong padding is provided to prevent the belt from crashing into the body when loaded. Plastic foot protection fastened to the belt. It has a carabiner for connection to the trimmer and a spring-loaded shock absorber. A top-mounted quick-release latch makes it easy to open and close the brushcutter.

Brush Cutter Harness

For your information! Different models of backpack straps may differ from each other by the design of locks, carabiners, the presence or absence of additional pads and latches. But the principle is the same, as is their working principle.

| Denial of responsibility | Contacts |RSS