How to put on the grass trimmer belt correctly
Huter GGT-1900T reviews
Runs on gasoline. No shaking in my hands after mowing large lawns, like I had with my old trimmer. Sure, the vibration is there, but not too much. I have to fasten the belt properly, because then I won’t feel the vibration and the weight.
The grass trimmer does not weigh much and is easy to guide. Before each mowing of the lawn, I change the line, sometimes I have to sharpen the blade. I have a big yard to work (about 17 acres). I can do it in half a day, with no breaks.
Tried mowing shrubbery shoots. had no problems.
I bought it for about 7K ₽. I was surprised that the grass trimmer has to be started with the trigger pulled.
About consumption. Sucks up 0.5l of fuel mixture in about 30 to 40 minutes of work at medium-high RPM. While I do not undertake to judge, a lot or a little for 1900 watts, 2.5-horsepower engine v = 51.7cm3, nothing to compare it to.
Just a warning. Review “dummie”. My first weed trimmer. Bought on dealer’s advice based on mowing area. 0,15 hectare access to the plot approach to the electric pole.
It did not take much time and effort to assemble the machine. I had a sparing ride on the reel. In the first trimmer the screw of the air filter cover was lost. Replaced by a similar, but longer. The reel broke into parts on the second mowing. Couldn’t find the spring. I bought the same coil instead (450). At the third mowing the control knob malfunctioned inside. There was no warranty, because the grass trimmer was bought a year and a half before use. Not to spend money on service. I took the grass trimmer to my ace friend in Moscow. Hardly corrected the handle, but said, all (or nearly all) about the manufacturer. Myself only used Japanese grass mowers for 5-6 years without much repair. Didn’t mow with it again, left the grass trimmer for the winter. Took it out for its first mowing this spring. Of course, I rinsed the air filter well, bought fresh gasoline. But I used last year’s oil (I don’t think it got any worse over the winter). I started it up for a long time and it was a pain in the ass. I was about to give up on this torment. But I started it all the same. Let it work at idle for about ten minutes. Mowed three or four acres of young grass. I noticed at times the engine went into overdrive on its own. And I got worried. Gave the mower a rest for about an hour. AND OH, MIRACLE! ♪ And when I started it up again, it started farting ♪. and it wouldn’t start again. What did not do. Thankfully, the grass is still on such a thick and high. Sitting with my wife, I wondered if I should take it in for repair. A village in the middle of nowhere. To the area 20 km, in the internet I read that the parts wait for months. Yeah, and they rarely show true diagnostics. Will be sentenced to repair the 3-3.5 thousand. I put this invalid in the shed. I went back to Moscow, looked through all the imaginable and unimaginable reviews, forums, videos, ratings, etc. This weekend I’m going to the country with a new scythe. Husqvarna 128. It’s not unpacked yet. To buy a gasoline trimmer for 7000 for one season is possible, of course. But that is not very logical.
PATRIOT PT 555
Looking for positive and negative reviews of the PATRIOT PT 555?
We’ve gathered 70 negative, negative and positive reviews from 11 sources.
We’ll show you all the pros and cons of the PATRIOT PT 555 revealed by users’ use. We do not hide anything and we post all positive and negative honest customer reviews about the PATRIOT PT 555, as well as offer alternative products similar. Is it worth buying. The decision is up to you!
Choosing the right attachment
In addition to their product manufacturer usually provides several cutters (usually 3).
A fishing line wound around a drum is used as a cutting element for soft grass. With a speed of 9000 rpm you can effortlessly mow even large lawns.
For rougher grass and thickets, you can use one of the metal blades, which differ from each other by the number of cutting teeth.
For mowing thick growth, reeds, young bushes the disc with 40 or 80 teeth is intended. Corn, dry weeds with thick stems can be mowed with 3- and 4-blade mowers.
To lay the cuttings in swaths a blade with 8 blades is used, and a special comb is mounted on the mower itself.
And now more about how to install the cutter. The place where the burr is fitted is called the gearbox. First of all, you need to secure the shaped washer with the hexagon socket wrench.
Then place the blade on the disc, aligning the holes in it with the washer head protrusion. After that you need to install the upper shaped washer on the shaft and tighten everything with the nut.
Here it’s worth remembering that the thread on the shaft is left-handed, so screw in the nut (and the mowing head) anticlockwise.
Use the wrench, also included in the delivery set, to tighten the nut up to the stop. You can replace the cutter by doing all the operations in reverse order.
How to put a new belt on the washing machine
The problem of installing a new belt in a washing machine is so urgent that I had to publish this article. Masters of repair have brought everything to automatism and an untrained person often has questions and difficulties. The first thought that comes is that the belt is short or defective. But it isn’t. We will talk about installing brand new belts. Note that this is not always the case.
Why the belt won’t fit??
Keep in mind that most washing machines do not have belt tension adjustment. A new strap is not yet stretched, unlike an old one, so you have to use a lot of force to install it. It often seems that the belt is too short and it is impossible to put it on. Below we will tell you how this process can be made easier.
How to install the belt easily?
We deenergize the device from a network and we remove a back cover of the washing machine. First check the engine pulley to see if there are any remnants of the old belt (see photo 3). photo 1). If so, you need to remove everything unnecessary. Next, pull the belt first on the motor pulley, and then on the idler pulley of the drum. And here is the most important moment. If you can not get the belt on, you can pull it to the pulley of the drum with 2 plastic cable ties. If there are no ties, it is acceptable to wrap it tightly with duct tape or scotch tape. After you have secured it turn the pulley of the drum. The belt should install completely, then use side cutters to bite off the plastic ties. After installation, the new belt is stretched like a string and this is considered normal. Look up (vertically) on the pulley and make sure the belt is centered on the pulley side surface. The photo shows the process of installation on the washing machine brand Bosch WMV1600. This particular model is the most common problem. This is because the top of the drum pulley is covered and the clearances between the housing are very small. And finger-holding the drive at this point is quite problematic.
Belt damage is the main reason
The drum drive belt carries a lot of load and friction. The high speed of the engine drive pulley is quite high and can reach 10,000 rpm. Not surprisingly, over time, the belt wears, stretches, and eventually breaks. Of course, there are other causes of damage, but these are special cases. There are two main belt materials and color variations. rubber (black) and polyurethane (light yellow). And it’s been noticed that it’s the polyurethane that’s most prone to wear and tear.
How to adjust the brushcutter fasteners. The shoulder strap
The comfort of the gardener, and therefore the speed and duration of his work, depends on the correct mounting of the brushcutter on the backpack belt. Many people do not want to spend time on the adjustment of gasoline grass trimmer mounts on the double shoulder belt, and perhaps this is justified if you need to mow only a small area or near the fence, but when the large areas of the question of convenience and staying power will be paramount, if we do not want to stretch a mowing in a few days. In addition, properly adjusted lawn mower mount will make mowing the grass much safer. As for me, then it is worth to understand this issue.
Care of the device
Plugging it into a power socket or filling it up with fuel isn’t enough to get the machine ready for mowing. These are necessary steps, but some other manipulations must be done as well. Before you clean your lawn or lawn, you need to manually remove all metal, stone objects, glass splinters and other hard objects. Ideally there should be nothing left but grass and small bushes. The wire is also must be removed, because it can break the mower. When the working area is ready, you may assemble the cutting parts. To change the cord on the blades unscrew the fastening nuts, put the necessary part, put the nut back and tighten it with a wrench.
Read Perennial onions. varieties and species
Gasoline grass trimmers should be filled only with the fuel specified in the manual. Devices with two-stroke engines usually use fuel grade Ai-92. But it is not possible to grease them separately (unsuitable construction). That is why pure gasoline cannot be used, instead a gasoline-oil mixture is used.
You must also remember the basic safety rules when working with. Wear thick clothing that is impervious to dust and dirt when mowing. Protect your hands with gloves and eyes with special goggles. Hold the mower strictly with the cutting unit parallel to the ground. Only then can you start the engine.
Assembly procedure is described in the manual for each model separately. There is no sense in duplicating it. Petrol grass trimmer must first “work in” to the fuel, that is, let it work 2-4 minutes at idle speed. During work, you must pay attention not to feel that the engine operates with the load. Run-in is carried out by systematically increasing load level.
Grass trimmers with bike handle grips are held with both hands. If the bar is D-shaped, it is embraced with the palm of your hand. Put the belt on straight away to make work easier. The lower you lower the cutting assembly, the more even the grass is cut. You divide the mowed area into conditional squares, and move clockwise while working. then the mowed plants won’t get in the way.
Tall grass is removed in 2 or, in complicated cases, in 3 steps. If suddenly grass is wound around the reel or disk, it is necessary to turn off the device and carefully remove the clog. Experts recommend mowing lawns with the ends of the lines, not the whole length. Make mowing a large area easier by tilting the tool towards the plants to be cleaned.
To get the best cutting results, comfortable mowing and a long working life, it is important to respect a number of rules before you start.
Using a belt
Before you start the grass trimmer, you need to attach a belt to the assembled and ready to work device. fasten it to the boom with a metal loop. This mounting can withstand heavy and prolonged use. Some models allow the strap to be placed on one shoulder, others on both shoulders (backpack type straps).
Mowing the lawn
A cord is needed for this task, as lawn grass is softer than normal. You should first make sure that there is no large debris, branches, wires, stumps or unevenness in the area to be worked on. The lawn must be cut evenly, that is. the height of the grass must be the same in all parts of the lawn. To mow high grass correctly with a line trimmer you need to keep it level with the ground all the time, from right to left, smoothly and without a rush. You can divide an area into squares and cut them one after the other. It is recommended to move from one to the other in a clockwise direction.
The hay shouldn’t be too fine, so don’t mow too close to the roots. It is better to go to the mowing with a disk, because the meadow grass is tougher than the lawn, and the fishing line will not cope with it. Lower the grass trimmer as low as possible, trying to mow equal strips of equal length. It is best to mow around large sturdy weeds and bushes to prevent damage to the disc. Similar to the lawn, the grass trimmer should be moved from right to left.
Mowing tall grass
In this case, you need to move the trimmer from side to side twice to remove the height of the grass, and then mow it to the root. Three or more movements may be necessary. it depends on the length of the stems. It is better to cut stubborn grass at the base with a disc.
Mowing wet grass
It is dangerous to mow with an electric tool during or after rain! Moisture can cause a short circuit in the motor, the grass trimmer can burn out, and a person can get an electric shock. Dew is also dangerous, especially for units with a lower-mounted motor, and mains models that require an extension cord. It is safe to cut wet grass with a brushcutter, although gasoline-powered units with a low degree of protection against moisture should always be kept out of the rain.
Spindle speed adjustment is only possible on gasoline-powered machines. This option is used for a variety of jobs:
- Low speeds are ideal for cutting grass;
- Medium is for tall grass and thin shrubs;
- High speeds for trimming thick branches and bushes.
Electric cordless clippers can run for up to 20 minutes at a time. Then the device will need to be turned off for the same amount of time to allow the motor to cool down. Check the battery charge periodically.
Lawn mowers can run for up to 40 minutes or even an hour without stopping to cool the engine. Then they must be shut down for 10 to 20 minutes. How long a particular lawnmower will run also depends on the volume of its fuel tank.
To make the lawnmower long and trouble-free service, you need to perform a number of measures to care for it.
- Grass trimmer must be stored in a dry room.
- Clean grass and debris from the appliance after each use.
- The air filter and cooling radiator grid on the gasoline grass trimmer motor must be periodically cleaned in the manner described in the instructions for the appliance.
- It is necessary to monitor the presence of lubricant in the gearbox.
- Wires of electric trimmers must be intact, without breaks and cracks in the insulation. The devices should be plugged in only through grounded sockets.
- All cables must be coiled after use.
We suggest you read What is good to drink raw eggs
How to Properly Put on the Grass Trimmer Belt
The main thing is to adjust the grass trimmer belt properly to put on the mask. Adjust the height of the grass trimmer’s backpack belt hook by tightening the shoulder straps so that the grass trimmer blade lowered to the ground is positioned parallel to the surface of the plot (strictly horizontal). When working with a blade of grass trimmer adjust the height of the hook (by pulling shoulder straps) so that the grass trimmer saw blade was tilted slightly forward relative to the land surface.
Moving the bow for the grass trimmer suspension eye on the belt forwards or backwards, balance the grass trimmer so that when you release the handlebar, the grass trimmer blade is near the very surface of the area, but does not lie on the grass. For cutting bushes and young trees with the brushcutter saw blade, the grass trimmer must be balanced so that when you release the handlebar, the machine is hanging from the hook horizontally on the ground. Attach
Adjust the shoulder straps of the grass trimmer (harness straps) so that the load is distributed moderately on your shoulders (check with your hand on the grass trimmer suspension hook).
Husqvarna Grass Trimmer Belt Video. About the design features of the harness that make mowing with Husqvarna brushcutter, trimmer, petrol saw, brush cutter more safe and easy. wide shoulder straps and elastic waist belt, quick unfasten locks (carbines) in case of fire or any other situation requiring quick release from the trimmer for grass. On the versatility of belts for guys and ladies.
How To Tie Your Belt For Taekwondo
These Husqvarna knapsack grass trimmer belts (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, gasoline mowers, brushcutters, electric mowers, brush cutters.
Proper grass trimmer belt
There are grass trimmers that do not require additional devices. for example, lightweight battery-powered electric trimmers. Even a child can carry them, and they lie firmly in your hand without tearing out. But in most cases, grass trimmers weigh from 6 to 9 kg, and not to get tired of carrying them from place to place, you need a belt.
What else do you need a trimmer belt for??
1) To transport the grass trimmer. Transporting a grass trimmer to the cottage when you don’t have a car is tricky. If your equipment does not have a belt, you should at least make a pouch with a shoulder strap. How to properly put on a grass trimmer belt video. How to put on the right grass trimmer belt. How to put them on properly. How to properly. This will lighten the load when transporting the grass trimmer.
2) For comfortable grass mowing. After all, if your hands get tired, then you do not want to mow weeds and overgrown lawn. And if you do want to, shaking your arms with sluggishness is a dangerous option.
3) For an ergonomic positioning of the grass trimmer in relation to your body. Properly fastened and adjusted length of the belt protects against lumbar injuries and overstrain of the back muscles.
4) For safety. Grass trimmer is much safer if it is less likely to slip out of your hands when branches and tough vegetation hit the cutting head. When this happens, the grass trimmer, whether it is a gasoline or electric mower, makes a sharp jerk, and the grass trimmer is literally ripped out of his hands.
It is for these reasons that many garden trimmer models are equipped with belts. They are threaded through the shaft of the grass trimmer and attached over the operator’s shoulder. A belt helps balance the total weight of the grass trimmer and the operator, so you don’t have to compensate by extending your arms or putting one leg back.
How to put on a brushcutter correctly
REDVERG 5014460 shoulder strap for hanging the grass trimmer. With the hip protector. I bought a Champion grass trimmer.
STIHL Brushcutter Harness Setup
REDVERG shoulder strap
How to put on the belt, how to balance the thigh protector, how to move the bar on the back of the machine.
1) Find the place where the belt clips to the grass trimmer shaft. How to put on the grass trimmer belt correctly. How to mow properly. On many models, designed for amateur gardeners, the hook, screw, or slot is located next to the handle or ignition toggle switch.
2) Squeeze the belt carabiner and hook it into the lug on the handle of the grass trimmer. Find a second hole for your belt and do the same.
3) Put the grass trimmer with the belt on your back so that the top of the belt goes over your left shoulder (for left handers, over the right shoulder).
4) Adjust the strap length so that the lever, which is responsible for cutting power and continuous mowing, is at a comfortable height with your arm slightly bent at the elbow. In terms of width, make sure you have at least 10-15 cm from your body to the grass trimmer.
5) Put your right hand on the lever and your left hand on the top panel. Move the grass trimmer head, feel where the grass trimmer’s center of gravity is located. If your weight is still unbalanced and you have to bend over, or you put a lot of effort to hold the device, try to pull up or lower the belt by 1-2 cm. Once you’ve figured out the belt definitively, you’ll get a feel for which trimmer position is most comfortable
6) Stop cutting the grass if you feel pain in your lower back and arms. Re-adjust the belt.
What a belt for a grass trimmer should be?
It’s not a secret that grass trimmer belts are often just a sling with two carabiners, not adapted in any way for the convenience and comfort of the operator. Review on lawn mower shoulder strap I bought for my Champion grass trimmer how to put it on properly. Therefore, the belt can be bought in specialized stores of garden equipment, purchased online, or simply ordered at the nearest leather goods atelier.
The best for the grass trimmer is a leather belt: it does not slip and fixes the equipment quite firmly, as well as leather is pleasant to the touch.
In the shoulder area, you can make a special quilted overlay that will make the load on your shoulder less noticeable and reduce friction.
Remember that a properly fitting grass trimmer belt will significantly increase the comfort and speed of working with this garden equipment. And that means your health, your mood and your lawn will be just fine.
How to mow with a trimmer?
The main thing is to adjust the grass trimmer belt correctly so that the drum with the fishing line wouldn’t wander on the ground.
Properly make a petrol and oil mixture.
Not using too thick a power line. it overloads the grass trimmer and creates extra power.
Do not wind too much fishing line on the drum, and do not wind it too much.
From time to time stop and clean the basket
Lubricate the shaft of the grass trimmer and the gear (if it has one) with grease.
The trimmer from the company Variag mow according to the instructions:
Action 1. Setting the cutting mechanism.
Depending on the type of weeds you choose the cutting attachment: a line for soft grass, a knife for hard grass and small bushes. Unscrew the nut securing the cutting mechanism and install the cutting tool. How to put a collar on how to properly put on a grass trimmer belt how to properly play. Tighten the nut. the mechanism is ready to work.
Note: some grass trimmers do not have interchangeable cutting tools, so you can start working with them right away.
Step 2. Preparing the grass trimmer for work.
If the grass trimmer is electric, charge the battery or plug the motor in. If it’s petrol. fill up the tank with fuel. Then, depending on the type of grass trimmer. adjust it on itself (top-motor. hinged by the loop on the shoulder, backpack. by the shoulders, bottom-motor. take hold of the handles). Hold the grass trimmer above the grass, so that its cutting mechanism is parallel to the area to be cut. Starting the engine.
Mowing the grass with the trimmer is done in simple movements. It’s important to remember that the cutting mechanism of the device rotates counterclockwise, so the cuttings will fall on the mowed area. First. from right to left in front of us (this is how we cut the top of the grass). Backpack strap for how to properly put the form how to properly put the line on the grass trimmer. The second one is from left to right (this is how we remove the grass residue).
It is better to divide a large work area into squares, and mow grass on them, moving from one to another on the outside of each square.
When mowing grass on slopes, it is recommended to mow from below, moving parallel to the sloping area. Have reached the edge, go back, go a little higher. and repeat the same route. until the complete mowing of the area.
To mow the grass on an area where there are trees, it is better to use a line cutter, and mowing should be done by going around the perimeter of the area, bypassing the tree around the trunk.
After you have finished mowing all the grass on the plot, you need to turn off the engine, remove the grass trimmer (for shoulder and backpack devices), clean the cutting mechanism from the remains of grass.
How to assemble a gasoline trimmer for grass: the order of action and step-by-step video instructions
As a rule the grass mowing machines and similar ones are rather cumbersome.
The vast majority of all types of trimmers come unassembled, packed in a cardboard box, so before you start working such a machine must be assembled.
In addition, it is often necessary to collect the grass trimmer after winter, because some owners disassemble this device to take up less space during storage.
Duration of mowing
An electric mower can run for no more than 20 minutes without a break, after which it will need the same amount of time to rest. The engine needs to cool down to prevent the plastic parts from melting.
Gasoline grass trimmers can be used for longer periods of time. On average, you can work up to 40-60 minutes, or until the fuel runs out. In any case, the break should not be less than ten minutes, or better if all twenty. The problem is in the engine itself, which is deprived of the natural system for internal combustion engine cooling by means of liquid. To avoid overheating and increased wear and tear, it’s better to let the device cool down and at the same time recover its strength or collect the already mowed grass.
The right belt for a grass trimmer
There are grass trimmers that don’t need additional accessories. such as lightweight battery-powered electric trimmers. Even a child can carry them, and they are held firmly in your hand without tearing out. However, most often grass trimmers weigh 6 to 9 kg, and not to get tired of carrying them from place to place, you need a belt.
What else do you need a trimmer strap for?
1) To transport your grass trimmer. Transporting a grass trimmer to the cottage when you don’t have a car is tricky. If the equipment doesn’t have a belt, you should at least sew a pouch with a shoulder strap. It will lighten the load when carrying a grass trimmer.
2) For comfortable mowing. After all, if your hands get tired, you don’t want to mow weeds or overgrown lawns. And if you do, hands shaking from fatigue are not safe.
3) For an ergonomic positioning of the grass trimmer in relation to your body. A properly fastened and adjusted length belt protects against lumbar injuries and strained back muscles.
4) For safety. The grass trimmer will be much safer if there is less chance of it slipping out of your hands when branches and tough vegetation hit the cutting head. When this happens, the grass trimmer, whether it’s a gasoline or electric mower, makes a sharp jerk, and the grass trimmer literally “snaps” out of your hands.
For these reasons, many garden trimmer models are equipped with straps. They are threaded through the shaft of the grass trimmer and attached over the operator’s shoulder. The belt helps balance the overall weight of the grass trimmer and the operator, and you don’t have to compensate for the balance by extending your arms or putting one leg back.
How to Get Perfect Lawn Edges with a Weed Wacker
1) Find where the belt clips onto the grass trimmer shaft. On many models designed for amateur gardeners, the hook, screw, or slot is located next to the ignition handle or toggle switch.
2) Press the belt hook and latch it to the lug on the handle of the grass trimmer. Find the second strap hole and do the same.
3) Slide the Grass Trimmer with the belt over your back so that the top of the belt is over your left shoulder (over the right shoulder for left handers).
4) Adjust the length of the strap so that the lever, which controls the mowing power and mowing continuity, is at a comfortable height with your arm slightly bent at the elbow. In terms of width you need to make sure that there is at least 10-15 cm from your body to the grass trimmer.
5) Put your right hand on the lever and your left hand on the top panel. Move the head of the grass trimmer and feel where the grass trimmer’s center of gravity is located. If your weight is still unbalanced and you have to bend over or use a lot of force to hold the device, try pulling up or lowering the strap by 1-2 cm. Once you’ve figured out the belt finally, you’ll get a feel for which trimmer position is most comfortable
6) Stop trimming if you have pain in your lower back and arms. Adjust the belt again.
What should be a belt for a grass trimmer?
It is no secret that the belts for grass trimmer is often only a sling with two carabiners, not adapted to the convenience and comfort of the operator. Therefore, the belt can be purchased in specialized stores of garden equipment, purchased online, or simply ordered in the nearest studio, working with leather products.
Leather is best for the grass trimmer belt: it does not slip and fixes the equipment quite firmly, as well as leather is pleasant to the touch.
In the shoulder area, you can make a special quilted overlay which makes the load on your shoulder less noticeable and reduces friction.
Remember that a properly selected belt for the grass trimmer will significantly increase the comfort and speed of work with this garden equipment. Which means that your health, your mood, and your lawn will be just fine.
If we consider the principle of operation of the grass trimmer, it is similar to a hand-held scythe. The difference is that it is equipped with a motor, with its help the cutting element is rotated.
Manufacturing companies produce the following models of mowers:
- On which a gasoline engine is installed. These garden tools have a fuel tank, this is their distinctive feature.
- Devices with an electric motor. These tools have less weight, because they do not have a tank for fuel. But when choosing these models, you need to consider that they need a power source to work.
All electric grass mowers can be divided into those that run on batteries, and models connected to the mains. Each type has its own characteristics, but they affect the power supply unit. If you do not take it into account, the other parts of the design are similar in different devices.
If you take any model of grass trimmer, it consists of elements such as:
- Fuel tank (electric brushcutters have no fuel tank)
- The levers with which the mower is controlled;
- The blade for cutting the grass;
- the boom;
- A spool with a wound line that is used to cut the grass;
- Fuel tank (electric brushcutter has no fuel tank); cone gearbox; protective guard
- Bevel gear.
The motor is located near the mowing head and can be mounted on top or bottom. Only models with a straight boom have a gearbox. If it is curved, the connecting element becomes the main bearing. It consists of 2 bushings.
A fishing line is used as a cutting device. It can easily be replaced by steel blades and discs, they can be made of plastic or metal.
The choice of cutting element depends on the hardness of the grass to be mowed. The most often used in the work is a fishing line, it is called a cord. There are products of different shapes on sale, the spiral-shaped and round ones are in demand among buyers.
Wind the line around the spool, insert it in the bobbin with the 2 ends of the line loose. When the engine starts, the bobbin rotates and the grass is cut by the free ends of the line.
How to adjust the brushcutter belt How to adjust the brushcutter belt
Adjust the height of the brushcutter belt hook by adjusting the shoulder straps so that the brushcutter blade, lowered to the ground, is parallel to the ground (perfectly horizontal). When operating the brushcutter’s saw blade, adjust the height of the hook (by tightening the shoulder straps) so that the brushcutter’s saw blade is tilted slightly forward relative to the ground.
Move the brushcutter’s carrying eye forward or backward on the brushcutter belt and balance the machine so that when you release the handlebar the brushcutter blade is close to the ground but not resting on the grass. To saw shrubs and young trees with the brushcutter blade, the brushcutter needs to be balanced so that the machine is hanging level on the ground when the handlebar is released.
Adjust the shoulder straps of the brushcutter (harness straps) so the weight is evenly distributed over the shoulders (check with your hand on the brushcutter suspension hook).
Husqvarna brushcutter backpack belt video. About harness design features that make mowing with a brushcutter, trimmer, chain saw, brushcutter and other things easier and safer. wide shoulder straps and elastic waist belt, quick-release catches (carabiners) in case of fire or any other situation requiring quick release from the brushcutter. On the versatility of belts for men and women.
These Husqvarna brushcutter shoulder straps (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, chain saws, brushcutters, electric brushcutters, brush cutters, and other brushcutter models.