How to put the wheels from a car on a single axle tractor

What kind of car wheels to choose for a power tiller?

To install on the agricultural device, the simplest discs from “Zhiguli” with a 4-boltitude mounting will be suitable. Nevertheless, you can meet hubs for 5 mounts. For such models it is worth to choose Moskvich rims.

As for the tread, it is better if its width and depth are more impressive. This will improve the passability of the device. And still if you have on hand an old tires with a shabby pattern, they are quite suitable for this device and will last for several seasons.

For further installation work, you will also need worn brake discs.

Making wheels for a power tiller with our own hands

The single axle tractor is a technique that most farmers are familiar with. In fact, it is a mobile tractor that is used for plowing, planting, or transporting goods. It is convenient on small cottage plots, where it is already hard to do everything with your hands, but a large tractor is not needed. If you are reading this article, then you either already have a single-axle tractor, or you are going to buy it.

One of the most frequent questions of owners of this equipment is how to make wheels for a power tiller with their own hands? The thing is that they wear out very quickly in the standard configuration, and they are not suitable for all types of soils and terrains. Buying new ones is quite a costly affair, so you can resort to your own craftsmanship. In this article we will consider how to do it.

Wheels and tires for a power tiller

The wheels are an important part of the machine that not only provides stability on the ground, but also absorbs vibration. Unfortunately, they are not versatile, so one pair of standard-sized tires to do all kinds of work will not do. Some wheels may not be suitable for certain types of terrain, others may not allow you to make furrows of the desired width. Most owners of power tillers have in stock, in addition to the basic, 2-3 kinds of additional pairs.

Ways of attaching car wheels to power tillers. What wheels are needed for your cultivator?

Wheels for power tillers.Hoes with their own hands.

Wheels of Oka on a GBM-087-30-310 single axle tractor

Lengthened, reinforced and weighted hub for power tillers Neva, Oka, Kaskad, Luch, Celina, Kadvi and other models with 25 or 30 mm shaft. The hub is designed for mounting the wheels from the car Oka on your single axle tractor, dimension 3h98, outer diameter of the hub 50 mm the wall when installed on the 30 shaft reducer 10 mm.

The installation internal diameter of a hub of 25 or 30 mm Full length of a hub of 240-310 mm (it does not demand additional extensions, at the expense of the length it is established rather tightly at once on a shaft of the reducer that minimizes warping and run-out of wheels than at use of usual extensions of axes with standard hubs in which each unfortunately huge spacing that gives big warping) the Hole for a locking pin of 10 mm. Boltration holes for mounting the wheels of a motor-block: 3х98 for mounting wheels Oka, centering shoulder D 58 mm, holes for a stud or bolt M12 (It is possible to produce threaded holes M12x1,25 for installation of automobile studs, with thickened version of the flange.

wheels, single, axle, tractor

(It is possible to change the length of these hubs under your required wheel track, as well as the size of fixing holes, rails, the diameter of the shoulder as well as the thickness of the flange for any wheel or boot on agreement with the customer) Outer diameter of the disk 126 mm. Thickness of disc after machining 6 mm. (Thickness of disc is turned from 10 mm thick plate only after welding to hub, to eliminate run-out and to keep perpendicularity of plane of disc and wheel mounting to axis of rotation, thickness of centering shoulder 4 mm, diameter of shoulder 58 mm. The thickness of the bushing wall 10 mm (The bushing is made from a single round bar with a diameter of 50 mm, the material St. 35, the seating hole on the gearbox shaft was turned by a chisel to the size of 300.15 mm for a tight fit on the gearbox shaft with minimum clearance)

This hub is used to connect the output shaft of a motor-block 25 and 30 mm diameter with a variety of flange gears and motor-block or car wheels, without the use of adapters and extensions, it replaces the standard conventional extensions and conventional hubs motor-block but is many times better in quality and service life, which ultimately reduces the load on the gearbox and the cost of its repair. Can be used on all models of power tillers with round gearbox shafts D 25 or 30 mm, and optionally with hexagonal joint.

Hubs for power tillers mtz single axle tractor Neva wheel hub single axle tractor Salyut hubs Universal hubs for power tillers Reinforced wheel hub single axle tractor Wheels of oka on a single axle tractor Buy wheels on a single axle tractor oka Put wheels of oka on a single axle tractor Wheels of oka on a single axle tractor Neva single axle tractor oka wheel size

See also  How to get one -axle tractor hopper. Preparatory stage before starting a single tractor

Supply includes: Hubs for wheels Oka GBM-087-30-310 2 pcs.

Similar names for this product: Wheels from Oka on a single axle tractor; Oka single axle tractor on Zhigul wheels; Oka single axle tractor wheel size; Buy wheels on Oka single axle tractor; Put wheels from Oka on single axle tractor; What wheels on Oka motoblock; Car wheels on Oka single axle tractor; How to put Zhigul wheels on Oka single axle tractor; Look free single axle tractor Oka with front wheel.

Moto-blocks: selection tips, design features, attachments and trailed equipment

Design features Often the terms “motocultivator” and “single axle tractor” are confused. But although they are close in purpose and design, but still not identical machines. Cultivation (loosening the surface layer of soil without overturning the layer) is the main and sometimes the only function of power tillers. A single-axle tractor is a more versatile machine, capable of using special trailed or mounted implements. It can be used for plowing, breaking up clods after plowing, removing weeds, leveling the surface, loosening the soil crust, evenly mixing fertilizers with the soil, transporting goods, as well as cleaning the area and clearing it of snow. Usually, power tillers have two shafts: one is attached to the drive wheels, and the other is a PTO (power take-off shaft for short) for driving the attached implements. Wheels on power tillers are usually only available as a substitute for wheels. (There are so-called self-propelled power tillers, which, in addition to the shaft for wheels, have a separate shaft for drills, but the installation of any other tools is not provided.)

Modern power tillers are equipped with four-stroke engines with power from 5 to 15 liters. с. Two-stroke units are found only on older models. Some heavy power tillers are even equipped with diesels: They have a big torque at low rpm, which is much more important than power-to-weight ratio for “tractor-like” machines. The only thing limiting the widespread use of diesel engines is their high cost.

One of the most important characteristics that determine usability, reliability and even layout is the type of clutch and gearbox. A heavy, all-purpose machine is not without several gears and reverse gear. powerful power tillers have a gearbox and a disc clutch, much like an automobile. On light or inexpensive obsolete models, the “gearbox” is a set of pulleys connected by belts. They select the transmission by tensioning the pulley of this or that belt (the other belts slip in this case). Heavy power tillers weigh more than 80 kg and have a horsepower rating of more than 8 liters.с.


These machines handle large areas. They are designed for professional use by farmers and municipal services workers.

Power can be taken from either the belt drive or the splined connection. It is not possible to say for sure which is better. The first method, thanks to slippage, prevents breakage of the power tiller or implements in case they get jammed, e.g. when hitting a stone. Splined PTO allows more torque to be transmitted and is therefore suitable for heavier, more powerful machines. Another advantage is the ease of attachment of attachments: it is quicker and easier to connect the splines than to put a belt on the pulleys and tighten it. You don’t have to worry about losing the belt when you use your power tiller without an active implement.

Hitching and trailed equipment Unlike power tillers, power tillers are usually sold with only pneumatic wheels without any tools that are bought separately. Therefore when choosing a power tiller one should consider not only its technical parameters but also the range of equipment for it and compatibility with equipment of other models and producers. The following types of attached and trailed equipment are the most widespread.

Cultivator (tiller). Cultivation tillers are the most popular tools. They are installed on some models instead of wheels, like on a motor cultivator. Changing the number of easily removable sections and adjusting the coulter, select the desired width of cultivation. But it is preferable to use the cultivator as a separate mounted unit with a PTO drive.

Wheels ensure uniform forward motion and prevent “self-burrowing” of tillers, which is a sin of conventional cultivators. And since the cutters and wheels rotate in opposite directions, this prevents them from “popping out” and “running away” when hitting a harder patch of soil.

Plow. Sometimes plowing is preferable to other types of agricultural work. When cultivating virgin land, for example, where there is a lot of ground to cover, cultivation is too time-consuming. If you have the right skills, the plough can be used to bury potatoes in the spring, and to dig them up in the fall. A well-built and adjusted plow is self-deepening on the move.

Reverse plow. With a conventional plough, after each furrow is ploughed, the single-axle tractor has to be driven backwards at idle. The reversible plough has two shares. one tilts the seam to the left and the other to the right. But only one plough is in operation, the other is lifted off the ground. When ploughing in reverse, the reversing plough is already in operation, so the seam falls off in the same direction.

Rotary plough. It requires a PTO drive to work, but it is easier to work with than a simple plow because it is not critical to the uniformity and straightness of the power tiller’s movement. This tool has two to four curved shares that lift the topsoil down like a traditional plough, with the advantage that it can work more efficiently than a rotary tiller.

See also  Metal wheels for a power tiller with their own hands

Harrow. After plowing, there are huge clods of earth. They need to be broken up and leveled. This is what the harrow is for. a disc or tine harrow (finger harrow).

Hiller (plough-hoe). The V-shaped plough. It is used to make furrows for sowing vegetables (potatoes, beans, peas, onions), and to dip potatoes after planting.

Potato harrow. The process of digging out the potatoes is one of the hardest parts of farming. A plow can be used for this purpose, but it is heavy and often destroys the root crop. The best option is a special potato trowel. It lifts the soil with the root crops, the soil crumbles and the potatoes are on the surface.

Mower. Not only do you till the ground with a power tiller, but you also mow the grass with two basic types of mowers: knife mowers and rotary mowers. Rotary are more effective, but the knife ones are more maneuverable, they are more convenient to mow between trees and bushes.

Rotary brush. A nozzle that allows you to quickly and efficiently sweep a large area, whether it’s asphalt paths or the lawn. You only need to adjust the height. It can also handle freshly fallen snow.

Blade blade (bulldozer blade). Sometimes you need to move a pile of sand or remove a layer of soil, but more often. snow. Waving a shovel is long and tedious, to call a bulldozer. expensive, and on a small plot it will be like an elephant in a china shop. The owner of a heavy power tiller has another option. to mount a snow blade. Of course, you can’t get a real bulldozer. too little weight. But it can handle small piles of junk.

Auger rotary snow blower. Snow can be pushed aside with a snow blade, and finally clean the surface with a brush. But when there is a lot of snow, it is better to use a special snow thrower. Steel toothed auger crushes even snow and freezing drifts. Snow is thrown to the side over a distance of up to 20 meters.

Cargo trailer. Cart with capacity from 300 to 500 kg can be attached to the crawler for transporting loads. It usually has a dump or tipping body. The cart may be equipped with brakes and an operator’s seat, and sometimes even with lighting equipment.

Trailer adapter. This unsophisticated device is also called a one-wheel work cart or a riding module. Allows you to turn a single-axle tractor into a mini-tractor with a breakable frame. Represents a “rear axle” for a power tiller with an attached seat. There is a drawbar at the back of the adapter for trailed or passive attachments.

Metal wheels with grousers. The difficulty of plowing with a power tiller is its low weight and consequently low tractive force. There are special metal wheels to increase it. They are considerably heavier than pneumatic ones, and the high, sparse tines do not clog with soil during operation.

Skid chains on wheels. Also designed to increase traction, but less effective. But they are cheap and compact.

Weights. If a single-axle tractor is too light for high traction, additional weight is added. The Wheel Weights can be attached either to the body of the power tiller or directly to the wheels, which is more efficient.

In addition to these, there are many different specialized units: hay tedders, motor pumps, electric generators, seeders or combined machines to perform several operations in one pass.

Buy a single axle tractor in the chain of stores of garden equipment and power tools Udachnik

Wheel extensions for the power tiller

Axle extensions allow you to significantly expand the wheelbase of your power tiller. They make a single-axle tractor more stable over all track widths and significantly improve the tractor’s balance. Additional wheels can be added on each side, which will increase cross-country capability or create it where it is almost impossible.

In addition, the extensions also perform such important functions as:

  • to carry out difficult work and on heavy types of soil;
  • the tractor can be used on uneven ground and in every type of terrain, including hilly terrain, rugged terrain, ditches, pits, etc;
  • The single-axle tractor will not slip and roll with heavy attachments, as is often the case with narrow wheels or without additional equipment extensions;
  • Passability and maneuverability are greatly improved with extensions;
  • Extensions are indispensable for fitment on a single-axle tractor with additional trailing shoes, iron and pneumatic wheels.

Making it with your own hands at home

  • You need two tubes of equal length with a diameter of 2 mm or more of the axle diameter of the motoblock;
  • in each of them a thread is made for screwing into the axle of the power tiller;
  • on the reverse sides of each of the pipes are made holes two millimeters thinner than the discs on the wheels, if necessary, the pipes can be filed;
  • After that, the wheels are fixed on the extensions with steel plates and strengthened with bolts.

Tires on motor blocks

Choosing to buy a single-axle tractor, consumers consider, first of all, the engine power, cooling system, weight of the machine, but do not always pay attention to what tires are installed on a single-axle tractor. Wheels may not play a key role in the choice, but in operation the quality and parameters of the rubber come to the forefront. Tires for a power tiller. an important detail without which you can’t start work. The task of tires. provide traction to the attachment. But when your tasks change, expand, supplement, and the installed tires are not suitable, you will need to buy new tires for your power tiller. Also, you may need new tires on a single axle tractor because of wear, no matter how carefully you use or store them.

Tires are selected according to the task at hand. Wide, deep-tread tires (6.00-12), behave smoothly and steadily on uneven ground, have improved flotation. Such tires are often used for heavy field work: plowing, planting and digging potatoes, and other power work. Tasks of transporting goods, cultivating plants, and working in gardens are solved by mounted maneuverable, narrower (3.50-6) chambers for power tillers.

See also  Huter single axle tractor cutter assembly for power tiller

Types of tires for a power tiller

In order to buy the right tires for a single axle tractor you must take into account several factors: load, weight of attached implements, machine power, soil types, compaction, location of the site. Determining the task and choosing the right tires for your power tiller will allow you to maximize the use of purchased equipment, reduce fuel consumption (wider tires. higher flow rates), keep the cultivated ground in good condition.

Before buying a tire for your power tillers we advise to decide where and on what ground the machine will be used.

The tires on a power tiller are divided into three basic types:

Pneumatic. a universal rubber for the tiller. Allows you to work on hard, loose soil, to move on an asphalt road.

Solid tires are ideal for working on hard, rocky ground.

Metal. provide the best flotation on any soil.

How to know which tire on a single axle tractor you need? Number/letter code markings are always printed on the tire. They contain everything you need to know: outer diameter, wheel width, rim size. Take this into account when choosing skates at Agromechanics online store.

What tread pattern to choose

“Herringbone” aggressive tread, specially designed for soft and loose soil. Rubber with this pattern provides maximum traction when working in the field, as well as suitable for moving on asphalt or dirt roads. Although such wheels are universal, but they are best used in early spring or late autumn, when the ground, after melting snow, spring rains, has turned into slippery, viscous mud. Remember that a single-axle tractor tire should have an aggressive tread for hard-tilled soils.

Selecting tires, rubber on a single axle tractor at attractive prices, pay attention to the quality, reliability of products. This will depend not only on its service life, but also, your safety.

Tire types, application

Low Profile Rubber. Small to medium size (4.00-8″, 4.00-10″, 5.00-10″, 5.00-12″) are used on belt-driven machines, air-cooled machines, with diesel/gasoline engines. Due to the low ground clearance (agricultural clearance) used more often in spring for ground treatment before planting.

Full-section (high profile) tires 6.00-12″, have high ground clearance, improved flotation, but low maneuverability. Available on heavy water-cooled power tillers with 8 hp and more only. This is a universal fit. Great for most agricultural work.

Wide ramps on a single-axle tractor guarantee better traction, traction, and cross-country ability on different types of soil, but, at the same time, the fuel consumption increases. This type of tires is heavier, requires a powerful machine. Narrow tires are more often used for inter-row work or for transportation of crops, goods.

Tire constructions

Diagonal tires. Have a strong sidewall, allowing to use them when working on the plots, where there are stones, bumps, branches. Not expensive. Widely used in agriculture. On the downside. Shorter service life. Must monitor the air pressure in the camera, otherwise the adhesive properties deteriorate, which can lead to instability and premature tire wear.

Radial tires. There are two types: inner/outer tubeless. The main feature of this type of rubber: longer service life, low soil compaction, which is important when working in the fields, guarantee a softer ride, affect fuel economy, not critical to the air pressure in the wheels.

There are two kinds of tubeless/ tubeless tires. No single answer as to which is better. impossible. Many criteria: from personal experience of use. to the price. Judging by the convenience, repair, durability, it is more profitable to buy a tire on a single axle tractor tubeless, but, in terms of price it will cost more.

Buy wheels, tires, cameras for agricultural machinery in Ukraine

Buy tires for single axle tractor Zubr, Kentavr, Zirka, Weima and other brands offers online store Agromehanika. The catalog presents a wide selection of wheels, tires, tires and chambers. Our company is in the market for over ten years. Each employee is a professional and understands perfectly what the user needs. We work only with official representatives.

Buy online tires in Ukraine for cash / cashless payment, with delivery (New Mail, Myst Express) has become even easier. For example: take a popular brand on request. Buy tires for the motor-block centaur. Go to the online. store, add the desired tires in the shopping cart, place your order. All goods on the site are also available, by phone or offline. Our sales outlets are located: Kiev, Vinnitsa. If you have any additional questions or problems with the order please contact our managers by phone.

Wheels for power tiller

In our store You can buy single axle tractor tires with delivery in Ukraine. We offer both tires and complete wheels and rims. All wheels are stored indoors both in winter and summer, thanks to which they are not exposed to sunlight, water and snow, not affected by temperature changes. The storage method is very important for tires, so when ordering always ask how and where they were stored.

Our tires are suitable for any power tillers: Kentavr, Neva, Vityaz, Aurora, Zubr, Dobrynya, Zirka, Forte, etc.д. With quality wheels, a single-axle tractor can easily cope with any type of soil and various obstacles on the way.

| Denial of responsibility | Contacts |RSS