How to redo the rotary mower to a mini -tractor. Rules for installing homemade…

Homemade rotary mower for a mini.vector

To date, the variety of technology, which belongs to the agricultural direction, does not cease to surprise each of us. Undoubtedly, the main area of ​​activity of each of them is the relief of human labor regarding the works of agricultural nature. After all, we all know how difficult it was our ancestors who, in order to simply feed themselves and their families, spent all day in the fields in order to bring their land into proper form and therefore gather a good harvest, and a lot of effort was spent on it, because they worked with using manual homemade tools.

Fortunately, we are much easier for us now, because technologies are developing daily and raised to sufficiently large heights. All that is required of us is to sit comfortable behind the wheel and simply manage the management that will do all the work for a person. Undoubtedly, there are a great many units who are ready to help us in this difficult matter and what kind of lawnical mower to choose to decide only for you.

Therefore, it can be said without a share of exaggeration that the progress of the technical direction fully complies with all the requirements regarding the tools.

Actually, we will talk about one of them in this article, namely about a rotary mower, which today is very popular among landowners. You can learn about the principle of its work and about the aspects of its device.

over, given that such a tool is enough, let’s say, not cheap, we will tell you how to make this unit with your own hands. So, let’s actually start considering this topic.

Principle of operation

First of all, it is worth noting that this kind of mechanism is intended for work, which are performed in meadows and fields, namely, relating to the mowing. over, these can be not only cultures that are grown in the agricultural area, but the device is also quite easily and simply capable of cope with weeds, which in fact also overwhelm our fields.

Using a detailed repair instructions, Khuskvarna 137, you easily eliminate the malfunctions in the work of the saw.

There are a huge number of nozzles for a chainsaw, here // MachinSpec.COM/Lesozagotovitelnaya/Benzopila/Nasadki.html you will find the one that is suitable for your work.

On this site you will find an introductory video about the Stihl 180 chainsaw, which will tell you about the proper operation of the tool.

It is precisely this kind of activity that is the main direction of the functionality of a rotary mowel, which are peculiar trailers to the tractor that moves them.

It is worth noting that this mower has three types of peculiar accession to transport, namely: a hinged, trailed and semi.wainted way.

over, this cutting device has the possibility of a kind of separation, which consists in the fact that the tool can be installed as from the side of the braid, in the front, as well as in the rear area of ​​the device.

As for the start of the operation of the mowing of this kind of direction, it actually can be carried out both from the transmission of the tractor itself and by moving the wheels of this vehicle. On the frame made of metal, the support wheel is attached, it is it that has an element with the cutting.

Actually producing its movement, it, let’s say, provokes a cutting system to move, it is thanks to this kind of process that the mowing itself is produced.

over, this kind of mitch can have the presence of three peculiar knives. In fact, their number directly depends on the model of the device itself.

It is worth noting that such a number of these elements is the most optimal and effective, as the productivity level of the tool itself increases. And in general, rotary mowers have quite significant indicators relatively safe and quality.

Principle of operation

First of all, it is worth noting that this kind of mechanism is intended for work, which are performed in meadows and fields, namely, relating to the mowing. over, these can be not only cultures that are grown in the agricultural area, but the device is also quite easily and simply capable of cope with weeds, which in fact also overwhelm our fields.

It is precisely this kind of activity that is the main direction of the functionality of a rotary mowel, which are peculiar trailers to the tractor that moves them.

It is worth noting that this mower has three types of peculiar accession to transport, namely: a hinged, trailed and semi.wainted way.

over, this cutting device has the possibility of a kind of separation, which consists in the fact that the tool can be installed as from the side of the braid, in the front, as well as in the rear area of ​​the device.

rotary, mower, mini, tractor, rules

As for the start of the operation of the mowing of this kind of direction, it actually can be carried out both from the transmission of the tractor itself and by moving the wheels of this vehicle. On the frame made of metal, the support wheel is attached, it is it that has an element with the cutting.

Actually producing its movement, it, let’s say, provokes a cutting system to move, it is thanks to this kind of process that the mowing itself is produced.

over, this kind of mitch can have the presence of three peculiar knives. In fact, their number directly depends on the model of the device itself.

It is worth noting that such a number of these elements is the most optimal and effective, as the productivity level of the tool itself increases. And in general, rotary mowers have quite significant indicators relatively safe and quality.

Material for the manufacture of mowers for a mini.vector

Buying finished spare parts is easier, but so you are unlikely to save. With your own hands, scrap metal will be required to make a mower. It, as a rule, can be found a lot in private courtyards in villages and villages. On abandoned farms you can find old rusty frames that are suitable for making the base of the mowing. Old iron batteries and barrels can be used. Even old frames from a bicycle can come in handy. Spare parts from an old Volga or Cossack, too, do not rush to throw away. All this in skillful hands plus knowledge of the technical part and skillful handling of welding can turn into a mower for a mini.gunner.

Technical characteristics of the rotary mowing

Specialists classify the considered units for the following types:

  • devices that mow and put grass in creams;
  • devices that mow and put grass in the rolls;
  • Rotor mowers on a single tractor that mow and crushed grass.

Some models immerse, flatten the grass, simultaneously mowing and laying in the worship. Taking into account the installation method, experts highlight devices such as a trailer, half.wow and a rotary hinged mower.

The device in question consists of the rear, front and side cutting systems. Devices with 1.2.3 or 5 bars are installed on the tractor. The rotary braid for the grass is launched under the action of the shaft or wheel of a tractor.

In the photo rotor mower on a mini.tractor

The units in question are installed on a tractor and a single tractor in a horizontal position. Knife and connecting rod should move in one plane. To work on a small plot of land, a Polish mower is used for a tractor. The front.mounted hinged model divides the land into corrals.

Before buying a rotary mower on a single tractor, the principle of its work is studied. If it is necessary to mow seeded high.yielding and lightweight herbs, weeds, then the rotary apparatus is used. Such a mower to a walk.behind tractor or tractor is fixed independently. The equipment consists of a bar to which knives are attached.

The apparatus with a grinder consists of a rotor, frame, drive mechanism, pipeline. The principle of operation of a rotary mowing on a single tractor: when the technique is moved, the vegetation is bend down by a shield, then it is mowed with a knife. The grass rises, crushed, falling into the container.

If it is necessary to quickly cultivate the Earth, then the Polish mower for a tractor or a walk.behind tractor with several cutting elements is used. Experts recommend buying such devices taking into account the following criteria:

Make a Gokart with Lawn Mower. DIY Toys

Plus a rotary mowing on a mini.tractor is the presence of a damping device that protects the knife from various obstacles. Experts include the additional advantages of the apparatus:

How to make a mower

Materials for direct manufacture:

  • wheels, number 4 pcs. and the diameter, which should be about 45 cm;
  • special axes designed to install the wheels themselves;
  • metal sheet;
  • the bottom from the old barrel (metal);
  • knives. 4 pcs.;
  • screws and nuts that will be fixed with knives;
  • welding machine;
  • chainsaw;
  • pen for special control, or you can take the pipe and make it yourself.

It is worth noting that if you do not have special wheels for a mower, then you can quite safely use wheels from a children’s old stroller. Actually a chainsaw is installed on it, it, in turn, will rotate the rotor.

For a mini.vector

First of all, it is worth noting that this kind of device will consist of a casing, fixed on the discs of the knives and frames. The movement itself arises due to the gross power of the mini.tractor, which is used in the work. Regarding the ground, this device moves directly on the disks at the bottom.

In order to make a welded frame you need to connect corners with a size of forty centimeters. Do not worry if you do not have the opportunity to buy good and durable, new metal, since for this process any scrap metal actually is suitable that you can only find.

As for the knives, they can be taken from the old tractor mower called “Rotorka”.

But they will need to work on them, namely shortened, since they are 3 cm. more than we need. This must be done so that the mower can “fully” work, otherwise the transport will simply have a low level of traction. If we talk about the height precisely from the beam, then it is 35 cm.

From a metal sheet, it is necessary to cut the disks in the amount of two pieces, and the diameter of which is 39 cm. It is worth noting that most owners of homemade mowers argue that such discs can be cut precisely from the barrels of old ones made of iron.

After which you can safely weld the knives to them, but they must be installed in such a way that their rotation is carried out easily and at ease. It is under the influence of a centrifugal force that they will actually produce a mowing.

You must remember that this kind of mount should meet the high level of strength. As for the supports of the lower ones, they should be made precisely from the disks taken from the lushpan and the diameter of which should be about 45 cm.

Watch the video features of the hayfield for a mini.vector.

The axial shafts can be made directly from the old metal pipe and with this diameter it should be 30 mm. As for the bearings, they must correspond to number 180106. Lower, of which should be installed precisely in the pipe, while the upper one. precisely in the pulley. It is worth noting that this design has a welded pulley. You can find out about the tractor segment mitch for the tractor, which is one of the main competitors for this unit by passing this link.

Rotor for a walk.behind tractor

First of all, it is worth noting that this kind of device is widely used both for beating grass growing on lawns and hay harvesting. You must remember that, through the influence of the mechanism on small grass, it grinds it, while high grass mowed it. You can find out about other mowers for high grass by passing the following link.

In order to personally make this kind of tool you need: chains taken from a chainsaw gearbox, discs in the amount of two pieces from a seeder seeder. detailed information about which oil is used to lubricate the chain of the chainsaws in this article. To make the knives themselves, you need, metal hardened 65 g. It is worth noting that each direct disk should have four knives.

An example of a homemade rotary mower in the photo.

For this kind of installation, you must drill a carbideal character by each individual disk, peculiar openings, the diameter of which should not exceed 6 mm. The knives themselves can be attached through the use of a special shinka, it is actually installed on a couch and it does not matter what fasteners the knives will be installed.

You must remember that the gap itself is between the knife and the tire should not be more or less by 1-2 mm directly from the knife thickness. over, also take into account the fact that the knife itself should have the possibility of rotation by all 360 degrees.

Axial fasteners are made of carbon durable steel, their size should be 8 mm. It is this axis that is delayed from the discs itself to the stop and at the same time the movement of the knives should be free. It is also worth noting that such a home.made mower is intended for the Neva motornote, you can find more detailed information here.

Homemade mower for a walk.behind tractor on video.

How to make a device with your own hands for MTZ tractor

Thanks to this kind of device, you can without any problems not only be a beard of grass itself, but also its grinding. In order to make this unit with your own hands, you must know what they actually consist of this kind of home.made mower. So, its components:

  • Shaft with strap knives, the number of which is twenty-four pieces;
  • Cheeks that are translated to the shaft itself;
  • Knives that can be performed directly from the steel spring. It is important to remember that the edges located on them should be extremely acute. For them, you need to make peculiar axes of the size of 9 mm.

It is important to remember that such a homemade rotary mower for T 25 is also great and aspects of its manufacture are no different.

Operation of mowers

The technique must be constantly lubricated. The frequency of this process depends directly on the frequency of use. The knives that are responsible for mowing the grass should be changed periodically.

How Lawn Mower Blades Cut Grass (at 50,000 FRAMES PER SECOND). Smarter Every Day 196

Understand that it is not difficult to replace. Firstly, the technique will begin to work worse, and, secondly, in the state you can run a finger

The consequence for such an incident will be the replacement of the disk. The most common injuries that occur when using mowls are those that are obtained when it is included. Therefore, in no case can you start inspecting the equipment without turning it off in advance.

Features of the operation of rotary Polish braids

Polish rotary mowers, as mentioned earlier, are perfectly controlled with the task of the main work. mowing the grass surface in large areas of the area. But in order for this to last a long time and the work of the braid is stable, it is necessary to observe some rules that can significantly increase the service life of a separately taken unit.

It is clear that the Russian person is not used to rely on pieces of paper, and he knows and knows how to our client, but this is not the case where there is an option to be so naive to the case. After all, on the correct selection of the studio, whether you will collect the Polish rotary mowing correctly, not so much the quality of the work performed depends, but your safety and the people around you and the people around you.

When the product is assembled and ready for operation, you need to study all safety precautions from beginning to end. This is a 2-wh or more principle step than assembling the unit, in the design of the Polish rotary mowing there are cutting elements, from which almost any one who will be in a certain proximity with a working unit can suffer.

Next, you need to install the assembled unit in the correct position, t.e. Thus, so that the wheels with cutting elements are parallel to the earth’s surface. Later, the main frame of the device is installed strictly perpendicular to the axis of the tractor.

In operation, a Polish rotary mower, the device is busy, we have previously described, does not represent any special troubles. It is only necessary to observe certain measures and manipulations, among which:

Often check the cutting system consisting of knives, for stealing and wear. If necessary, there are an option to either sharpen on the machine or change for new.

It is principled to bother about the state of the belts, whether their punctures have other cuts, whether they are also perfect. If you are currently not familiar with belts for the lawn mower, then we advise you to press here.

Observing these simple acts, it can be significantly extended by the life of Polish rotary braids, additionally avoid probable breakdowns that happen completely inappropriately, especially in the midst of summer.

Wirax device. 1.85m

“Wirax”. 1.85m is designed to mow various agricultural crops, herbs and much more. Additionally, Polish rotary mower 1.85 is the current method of fighting snowballs with weeds and weeds, germinating abundantly in the fields.

  • weight. 380 kg;
  • Dimensions (d/sh/c). 320cm/105cm/100cm;
  • The width of the processed surface is 1.85 m;
  • speed. 10 km/h;
  • The total number of knives is 6;
  • Requirements for the tractor-2 or more than 40 liters.With.;
  • The number of disks is 4.5.

What is necessary, we examined the technical characteristics of the main models of Polish rotary mowers.The properties are largely identical, as it would not sound annoying, there are still a couple of differences, which affect the final difference in prices. What to directly receive to decide, it all depends on what area you have at your disposal and what directly the requirements for the unit are important to you.

“Wirax”. 1.65m

“Wirax”. 1.65m is an excellent option for farms and separately taken farmers who appreciate the reliability and efficiency of work in the aggregate. Thanks to high.quality details and a strong case, a rotary mounted Polish rotary mower.65 ,, will serve its own owner for a lot of time, regularly performing his main tasks.

  • weight. 300 kg;
  • The width of the mowing surface is 1.65 m;
  • The height of the mowing grass (min). 3.2 cm;
  • The height of the mowing grass (max). 4 cm;
  • rotation speed. 540 rpm;
  • The number of disks is 5;
  • The total number of knives is 6;
  • Type of drive. Bom.

Homemade mower for a mini.tractor: Saving funds

Awestern equipment used for a mini.tractor has a high price. That is why it will be much cheaper for you to make it with your own hands. But for this you will need certain knowledge and experience, since work is quite serious. The mitch for the mini.tractor is a fairly simple device, having made which yourself, you can save a decent amount on its purchase, but all important characteristics will remain the same.

rotary, mower, mini, tractor, rules

Currently, there are two types of mowers for a minitator:

The first design is the easiest to manufacture and operate, therefore it is more common. Segment, in turn, is more complex equipment and is much more often clogged compared to the rotor device. In the photo you can see both models of such designs.

What material should be used when installing a home.made mowing?

The main material designed for the production of mowers with your own hands is scrap metal. Here you can apply absolutely anything. It can be frames from old bicycles, and unnecessary spare parts from the car. For the basis of the future device, rusty frames that you can find on any abandoned farm are also perfect.

In addition, it is possible to inspect objects in your yard, where an old metal barrel or battery can also be useful for the manufacture of equipment such as a mower for a minister with your own hands. The most important point in this work is the presence of skillful hands, some knowledge in the technical part of this issue and good ownership of the welding machine.

rotary, mower, mini, tractor, rules

Homemade rotary mower for a mini.vector: how to make?

In the photo you can see a home.made rotor mower for a mini.vector. This device is a frame, a set of knives installed on the disks, and the casing. This design functions due to the power shaft of the tractor. Movement on the ground is carried out using the lower disks.

The process of installing a homemade rotary mower for a mini.vector:

  • We take the collected scrap metal and construct a welded frame from it, which should consist of corners having a size of 40 cm each. Prepare knives for the future device.
  • We make two metal disks, the thickness of which should be 4 mm, and the diameter. 39 cm. In this case, the best option would be to use the bottom from an unnecessary iron barrel.
  • We fasten the knives on the finished discs. The most important thing is to ensure their free rotation. To do this, you will need the wheels that were used earlier for the lushchik. Their diameter should be about 45 cm. The axis will require an old iron pipe having a diameter of 30 mm. It is also necessary to install bearings: one for a pulley, the other for the pipe.
  • Then we fasten the knives on the shaft of the axis. It will be necessary to install pulleys on the pipe by welding.

Safety precautions

When assembling and installing, you should check all welding seams and connections. If this point is not fulfilled, the device may break during operation, jam neighboring parts and damage to the operator or a nearby person. When starting and operation of equipment, it is necessary to make sure that there are no people, animals, metal objects, solid materials nearby.

Making a rotary mower is much easier and easier than a segment. But if there are materials and desire, then you can cope with this task. Senocosolka-IS MASTENT will be able to perform various agricultural work.

The most common fastener system of haying for a mini.tractor is a hinged. And the drive system is chain. The chain braid is very comfortable and reliable.

Homemade mower on a tractor is an important device for farm lands. These products made independently, stronger, more reliable than factory ones will last much longer. Homemade mowers for a mini.tractor are more functional and simple in assembly.

DIY haymaking: drawing, materials, manufacturing instructions

Mechanization of work is able to simplify the conduct of a small farm or personal economy. However, the holding factor is sometimes the high cost of equipment. But you can make many devices yourself, for example, a hay. It will provide livestock with green food and allow you to dispose of weeds. For work on the manufacture, you will need parts that can be found in almost any household.

Homemade haymaking can be rotary or segmented. The first variety is most popular and convenient in terms of operational characteristics. The working part of the equipment is a disk with floating rotating knives. Such installations are effective for the case when you have to mow high grass.

Mobile knives cope with weed plants. If you want to make a device from a chainsaw, then you should not doubt it, because the unit is perfect for re.equipment, in addition, you can transform it back. A gasoline haying carp will have knives, as a material for which wood canvases act. You can use metal sharpened teeth.

Features of the manufacture of segment haymaking

If we compare the segment devices with rotary, then the mount in these units will be carried out to the walk-behind tractor or mini-tractor. The main difference is the principle of operation of knives. The working part of the equipment consists of long and narrow canvases that have teeth, they function on the principle of progressive movement. It will be possible to start the work by acting equipment using a drive belt. You can also use a power selection shaft for this.

These design features depend on the model of the walk.behind tractor or the mechanical tool that you plan to use. Having completed a segmented haying grinder, you can use it when mowing lawn grass. Portable modifications provide for the possibility of processing bushes. The gearbox is fraught with the engine hard.

Description of devices

It is worth starting with the fact that the word mower itself speaks for itself.

Rotor mowers at MTZ are a device that allows you to mow vegetable cover of fields and meadows, whether weeds or agricultural crops, which you need to get rid of.

Often, in everyday life, you can hear a synonymous definition of a rotary mower as a disk, which only allows us to state: the functioning of the current equipment occurs due to discs that performs the main function of mowing.

Typically, the rotary type of the device can be seen in the coupling with a vehicle, as a rule, this is a tractor. The mower is attached to the vehicle with a trailer, hinged or semi.wainted equipment.

Similarly, there is a distribution of rotary type of braids by the location of the cutting device, which can be fixed in front, back or side.

In working condition, the mower comes due to the movement of the wheel.

If you visually imagine the device of a rotary.type mowel, then it will be as follows: the support wheel with cutting parts is fixed on a metal frame. Due to the attachment of the support wheel, the cutting system automatically makes the system work, which, in principle, is mowing. One of the vivid representatives of these units is the Polish rotary mower 1.85, the information about which you will find here.

Based on the models and variations of this equipment, the braid can have 2-3 knives attached to the wheel-wheel wheel using a triangle (behind, as well as front and side). This will significantly increase labor productivity.

At the same time, the standard ones have very high output indicators.

Let us summarize

The priority factor in choosing a home.made mower for a walk.behind tractor is its safety, because you need to take into account the high speed of the discs when cleaning the grass. Accordingly, if the fasteners can’t stand it and fly off, you risk harm to society, injuring people who will be near or yourself.

Make sure of your competence and ability to invent this tool, because the costs of treating crippled organs and spent nerves will cost you much more.

User reviews

Like a hay of the device, an equestrian mowing, reviews of which vary, has its pros and cons of.

User reviews indicate that these devices have a number of advantages and disadvantages. In particular, the disadvantages include large dimensions leading to the rapid fatigue of horses during the haymaking. In addition, the process of kosba should take place only in dry weather, otherwise the cutting knives are clogged with grass and blocked.

However, insignificant deficiencies are overlapped by existing advantages. Firstly, the use of horses significantly accelerates the process of harvesting hay. The manual method is not so productive. Secondly, if, in addition to everything, the equestrian mower with his own hands was made, its owner significantly saves on components. Thirdly, work with horses is a great pleasure for those who love animals.

| Denial of responsibility | Contacts |RSS