How to run up the Lifan motor block engine. Characteristics

Whether to buy the Lifan Unoa Tractor: Technical Features, Instruction and Playing Instructions, Owners reviews

The Chinese company Lifan (Lifan) is a large corporation that combines many industries: from small.Blood.Cubatic motor vehicles to buses. Over, it is a supplier of engines for a large number of small firms producing agricultural equipment and small motor vehicles.

According to the general tradition of Chinese industry, instead of their own developments, there is a copy of any successful sample, usually a Japanese.

The widespread engine of the 168F family, which is installed on a large number of motoblocks, cultivators, portable generators and motorcypts, is no exception: when creating it, the Honda GX200 motor was the sample.

How to run the Lifan engine for a walk.Behind tractor correctly

The first hours of working with a new walk.Behind tractor are defined as a period of running. During this period, you should not use the engine at high speeds, and also do not use the unoic tractor in long and hard work.

At the end of the run.In period, you should choose the optimal engine operating mode corresponding to the load in each case of the type of work with the walk.Behind tractor. Unreasonably high engine revolutions reduce its motorcycle resource, which is especially manifested in the absence of a transmission load.

We will try to find out how to run into a new walk.Behind tractor from the instructions for the user’s instructions from leading manufacturers of motor blocks in Russia. We give a sample from the point of the walk.Behind engineer. You can find all the instructions on our website.

Playing of the MOTOBLOK MKM.3 Lander (Lander) The first 20 hours of operation MKM.3 are the period of production of engine parts and transmission, so the overload of MKM.3 during this period is not permissible.The cultivation of the soil during the period of the breakdown is carried out to a depth of not more than 12 cm per passage by cultivators without additional sections.Engine running mode: without load. 2500 rpm. 10 mines of the load. 3000 rpm. 10 Minnbez loads. 3600 rpm. 10 minloads of 30%. 3600 rpm. 10 minor load in 60%. 3600 rpm. Min. 10 min

Playing the motor block Neva MB 23

Long.Term and reliable work of the motor block is ensured with proper operation, timely maintenance and its proper operation in the initial period.

2014 Лифан Селия. Обзор (интерьер, экстерьер, двигатель).

The first 20 hours. The operation of the walk.Behind tractor is the period of production parts and transmission parts.

Overloading the motor block during this period is unacceptable.

The cultivation of the soil during the period of the running-in with 4 mills for several visits and to a depth of not more than 10 cm per passage.

Do not overload the one.Axle tractor when working on heavy and rocky soils when working with the main interchangeable tools.

lifan, motor, block, engine

When using a walk.Behind tractor as a vehicle, the mass of transported cargo should be no more than 200 kg. (150 kg for MB 2 with the Subaru EX-17 engine, etc.)

Check the oil level in the engine daily, if necessary, share oil to the top level. Check and tighten the threaded joints.

Carry the first change of oil in the engine (according to the manual/operating instructions for the engine).

Check and, if necessary, adjust the tension of the drive belt, the operation of the mechanism of disinfect the left wheel.

Playing of a reck of a rele with a digator Lifan (Lifan) and others.

Please note that the first 30 hours of operation of the walk.Behind tractor are the period of production, the motor block overloads are not allowed during this period.

Soil processing perform in 2-3 receptions to a depth of 10 cm per 1 passage.

Use the throttle lever for no more than 2/3 of its move.

Do not overload the one.Legged tractor for a long (over 2 hours) work on clay soils.

Do not start working on a walk.Behind tractor without checking the oil level in the engine crankcase and in the motorblock gearbox.

Not compliance with the above points can lead to the destruction of the connecting rod piston group, jamming of the engine and increased wear of the motorblock gearbox.

Playing the diesel engine (example from the instructions of Zirka LX 1090d. The Unoa Tractor of the LX 1090D model is a drive and pulling type unit, diesel engines of models 180, R180, 185, 185N, 190, 190N are installed on these motoblocks

Playing the motoroblock Belarus O8N-09N

A new one.Based tractor before starting operation should be drove up within 50 hours. During the run.In process, the parts of the walk.Behind tractor are worked out, which helps to increase the resource of the work of all nodes and parts. Be sure to carry out the running.In under the incomplete load on light transport work.

The new engine cannot be immediately operated with full load. In the initial period of operation, the engine must undergo preliminary running.In, which is necessary to develop rubbing parts.

See also  How to make a bike with a chainsaw engine

The operation of the engine at full power without preliminary running can cause the rapid wear of the rubbing surfaces of parts, lead to jamming, bullying and breakdowns. Therefore, the new engine in the initial period of its operation requires increased attention and especially careful care.

The duration of the engine is at least 60 hours.

During the engine running, follow the following rules:

lifan, motor, block, engine
lifan, motor, block, engine

After the engine is finished, eliminate the noticeable malfunctions and produce:

A) checking the reliability of fastening and, if necessary, tightening all bolts and nuts with moments according to table 3.3;

B) work on paragraphs 8 and 9 of maintenance, table 3.2;

C) inspection of the candle and, if necessary, cleaning it from soot;

D) removal in the hull cover (4), in accordance with Figure 5.2, carburetor K65T (engine “Motor C1ch 05853-03” (MS-10P-03)) Rosel lifting limiter (2).

Modeling for a motor block ZID 4.5, UMZ-5a, UMZ-6A, UMZ-5B

Operating instructions for the old.Style described in great detail the various points of maintenance of engine and motoblocks. Let us give an example:

Easation of a new motorogue agate

ATTENTION! The first 25 hours of work are the period of production. During this period, the work of the walk.Behind tractor at high capacities and its overload is not allowed. The soil processing is carried out for 2-3 receptions to a depth of 10 cm per passage. During this period, use no more than 3/4 of its course during this period. Do not allow for a long time (more than 10 minutes.) the work of the walk.Behind engineer in idle mode.

How to run the Lifan engine for a walk.Behind tractor correctly

The first hours of working with a new walk.Behind tractor are defined as a period of running. During this period, you should not use the engine at high speeds, and also do not use the unoic tractor in long and hard work.

At the end of the run.In period, you should choose the optimal engine operating mode corresponding to the load in each case of the type of work with the walk.Behind tractor. Unreasonably high engine revolutions reduce its motorcycle resource, which is especially manifested in the absence of a transmission load.

We will try to find out how to run into a new walk.Behind tractor from the instructions for the user’s instructions from leading manufacturers of motor blocks in Russia. We give a sample from the point of the walk.Behind engineer. You can find all the instructions on our website.

Playing of the MOTOBLOK MKM.3 Lander (Lander) The first 20 hours of operation MKM.3 are the period of production of engine parts and transmission, so the overload of MKM.3 during this period is not permissible. The cultivation of the soil during the period of the breakdown is carried out to a depth of not more than 12 cm per passage by cultivators without additional sections. Engine running mode: without load. 2500 rpm. 10 minutes without load. 3000 rpm. 10 min without load. 3600 rpm. 10 min The load of 30%. 3600 rpm. 10 min The load of 60%. 3600 rpm. 10 min

Playing the motor block Neva MB 23

Long.Term and reliable work of the motor block is ensured with proper operation, timely maintenance and its proper operation in the initial period.

The first 20 hours. The operation of the walk.Behind tractor is the period of production parts and transmission parts.

Overloading the motor block during this period is unacceptable.

The cultivation of the soil during the period of the running-in with 4 mills for several visits and to a depth of not more than 10 cm per passage.

Do not overload the one.Axle tractor when working on heavy and rocky soils when working with the main interchangeable tools.

When using a walk.Behind tractor as a vehicle, the mass of transported cargo should be no more than 200 kg. (150 kg for MB 2 with the Subaru EX-17 engine, etc.)

Check the oil level in the engine daily, if necessary, share oil to the top level. Check and tighten the threaded joints.

Carry the first change of oil in the engine (according to the manual/operating instructions for the engine).

Check and, if necessary, adjust the tension of the drive belt, the operation of the mechanism of disinfect the left wheel.

Playing of a reck of a rele with a digator Lifan (Lifan) and others.

Please note that the first 30 hours of operation of the walk.Behind tractor are the period of production, the motor block overloads are not allowed during this period.

Soil processing perform in 2-3 receptions to a depth of 10 cm per 1 passage.

Use the throttle lever for no more than 2/3 of its move.

Do not overload the one.Legged tractor for a long (over 2 hours) work on clay soils.

Do not start working on a walk.Behind tractor without checking the oil level in the engine crankcase and in the motorblock gearbox.

Not compliance with the above points can lead to the destruction of the connecting rod piston group, jamming of the engine and increased wear of the motorblock gearbox.

Playing individual models

Consider this process on motor blocks of individual brands.

Oka with Lifan engine

Such a model should take place for 30 hours. During this time, all elements are laid under light operating modes and defects are determined. The new Lifan engine unit during testing should work at minimum loads.

When testing a walk.Behind tractor on functional operations, the following requirements are fulfilled:

  • The soil is treated to a depth of 10 cm per passage in one direction;
  • The throttle should be open 2/3 of its full move;
  • On clay soil, the unoic tractor under load should work no more than 2 hours.
See also  The red light flashes when charging my Makita electric electric electric screwdriver

In addition, before each launch of the engine, it is necessary to check the oil level. With a shortage, a valley is made to a level of the minimum mark on the probe.

Neva with Subaru engine

This model, like MB-2 models with other engines, is rolled up for 20 hours. This time is enough for the details to be injured to the perfect working condition, and defects also appear in them. Overload the device with a large load during this period is unacceptable.

When running, the following should be observed:

  • Cultivate the soil with a complete set of milling mills into several approaches to a depth of 10 cm per passage;
  • Load the one.Axine tractor with a load of no more than 200 kg;
  • Before starting the engine, check the oil level and, if there is a shortage, make a valve above the minimum mark on the probe;
  • Make a refueling unit with a fuel of the required brand and proper quality.

You should also regularly monitor the tension of the drive belt. We must not forget about the element of the release of the left chassis of the walk.Behind tractor.

Centaur

The unit of this brand is pushed by clear rules. Their execution extends the life of the walk.Behind tractor as a whole.

The run.In the new “centaur” with air cooling is performed according to this algorithm:

  • The engine is loaded in stages: it should work for a third of his technical capabilities in the first three hours.
  • After the first three hours of running out of the engine, the oil is poured along with the transmission liquid from the transmission nodes.
  • The next 4 hours of testing the engine are loaded 2/3 of the technical capabilities.

During operation, monitor the permissible loads. In the periods allotted by the manufacturer, the time is regularly maintained and current repairs.

Firework

The uniform tractor Salut-100 at medium speeds is rolled up. The first soil cultivation is carried out with 4 mills. They are gradually deepened below at each passage. Cultivation is performed with a snoker.

After every 30 minutes of work, take a break of 10 minutes. After the first 4 hours of work, the oil is replaced in the motor. In the gearbox, the oil is changed after the one.Legged tractor is driven.

For this model, there are enough 25 hours of production of parts. During this period, the device is prohibited to include at full load. It is also forbidden to overload it in the process of testing.

When running in, the following norms are strictly observed:

  • When the functional modes are tested, it is necessary to cultivate the site at 2-3 passes, deepening the cutters of not more than 10 cm per passage;
  • The throttle shift opens on ¾ parts from its full move;
  • The work of the motor of the idle should not exceed 10 minutes;
  • Carry out checking and adding oil level in the motor.

In the future, the operation process is reliability in the operation of the listed models of motoblocks is ensured by the systematic maintenance and current repair work. This is mandatory to replace the oil and transmission fluid.

Squeezing of actions to run.In motor blocks

During the running.In, all the details of the motor, transmission and chassis are launched and worked out and are worked out. Practically, this is a sparing mode of operation of the walk.Behind tractor.

The running.In is carried out, following the four basic rules:

  • Oil level. It must be controlled before each launch of the engine;
  • Fuel tank refueling. The action does not cause difficulties, but it is recommended to use the brand specified manufacturer in the instructions for the operation of the unit;
  • Launch of the walk.Behind tractor. The motor should work for some time at medium speeds. Within an hour you need to test all the gears. Thus, the engine is not only running in, but the device is also adjusted to further operation;
  • The functionality of the unit. This stage includes the work on cultivating, plowing and transportation of goods. It is important to adhere to the maximum permissible load.

Each owner of a walk.Behind tractor needs to know about the features of the device running. When the process is over, oil is replaced in the motor and all transmission nodes. The lockering of the motor unit of idle may not be carried out without movement, since such actions can provoke extremely negative consequences for the aggregate.

Before starting work, you must carefully study the instructions. Manufacturers indicate general recommendations for running a certain brand motor. There is no particular difference in the running.In the diesel motoblock and gasoline.

Stages of running in the walk.Behind tractor

After checking the fasteners of parts, bolts, lubrication of individual elements, the algorithm of action will be as follows:

  • Pour oil into the container and check its presence and level;
  • Add fuel to the tank;
  • Check the condition of the oil level with the relay;
  • Open fuel supply from the tank;
  • Without including the ignition, handle the manual starter. If the engine is diesel, then turn on the decompressor;
  • Open the carburetor ditch;
  • Run the motor into the work, and as they warm up, close the damper.

Engine operation should begin with low speeds, gradually they need to be increased to medium. Motoboblock run-in time is 1-2 hours. In this case, it is necessary to work in all programs alternately. Such actions make it possible to check not only the condition of the engine, but also the gearbox.

The second stage of the running-in is about 3-4 hours and is carried out at low speeds. At medium speeds, the running.In takes about 6 hours. It should also be noted that each of their stages requires work on the first and second transfer.

See also  Single axle tractor with PTO agro

And now I would like to answer the popular question: “How many hours it takes to run the walk.Behind motorist STENLI 1030?»About 10 mothers, which is emerging 10 hours of direct work. Taking into account work in three stages and in two or three gears.

Maintenance

Running

The actions that are included in the run.In, significantly extend the life of the walk.Behind tractor, since during this all the details are worked out to each other and all components are lubricated.

Also, you have the opportunity to test the one.Axle tractor located on warranty service.

Run after purchase and long.Term storage is carried out. Performing the following actions, you will not spend much time, but extend the service life of the unit:

  • Check the presence of oil in the engine crankcase. Pour a full tank of fuel.
  • Start the engine according to the instructions and leave to work at idle for 20 minutes.
  • After 20 minutes, make a patch, increasing the speed to the maximum. Try to switch the gears. In this mode, work 4 hours.
  • The next 4 hours you can connect the wheels and roll one.Axle tractor without using attaching equipment.
  • After the run.In, drain all the waste oil and pour new.

Features of use

For successful operation, monitor the level of oil in the tank. With a low level or complete absence of a lubricant, the engine may fail.

The manufacturer recommends pouring motor oil type 10W40 at plus temperatures. The first replacement is carried out after 10 motorized hours, and the subsequent ones agree of the plan (every 50 mothers).

As fuel, gasoline with an octane number 92 is used. In order to fill gasoline into the tank, you must first loosen the lid and wait until the pressure in the tank is equalized.

Important! Do not close the air damper while starting a warm engine, because you can fill in a candle

The main breakdown and their causes

The engine will not start The light of the ignition was out of order. It must be replaced; The candle is smoked. It will require its cleaning; The tip of the candle is drunk. To dry or replace; Magneto failed. Replacement; The blades wedge Magneto. Put up; The fuel filter clogged. Clean or replace; hoses do not conduct fuel. Replacement; Carburetor is contaminated (in gasoline models). Disassembly and cleaning.
The cutters stopped rotating The stones and clods of the earth scored cutters. Stop the unit and clean the working body; Fastening elements were ill. Tightening; The clutch cable has not been adjusted. Adjustment.
The wheels do not rotate The clutch cable is not adjusted. Adjustment; The bolts got loose. A lifting; The belts stretched. Replacement
The gearbox is noisy The fasteners were weakened. Tighten; The oil level is below the norm. To add.

Neva motor blocks with Subaru engine

This one.Axic tractor is running out for 20 hours (like other Neva models with different engines). During this period, one cannot exceed the load on the one.Axle tractor. Cultivation should be done by no more than 10 cm, and transport goods weighing no more than 200 kg.

Motoblocks centaur

Air.Cooled centaur engine running.In the engine should be carried out according to a clear algorithm:

  • The first three hours the engine should work for a third of its capabilities;
  • Pour oil from the engine and transmission nodes, replace it with a new one;
  • Next 4 hours give the walk.Behind tractor to work on 2/3 engine capabilities.

Also do not forget about the load limits and after the end of the running.In. Carry out regular technical inspection and repair.

Lifan motor locks with engine

This model is about 30 hours, performing simple work with minimum loads. When running in with mounting equipment, the following rules should be remembered:

lifan, motor, block, engine
  • On complex soils (for example, on clay) you should not work for more than 2 hours;
  • The throttle should be open at 2/3;
  • Plowing should be carried out to a depth of 10 cm in one pass.

Neva motor blocks with Subaru engine

This one.Axic tractor is running out for 20 hours (like other Neva models with different engines). During this period, one cannot exceed the load on the one.Axle tractor. Cultivation should be done by no more than 10 cm, and transport goods weighing no more than 200 kg.

Motoblocks centaur

Air.Cooled centaur engine running.In the engine should be carried out according to a clear algorithm:

  • The first three hours the engine should work for a third of its capabilities;
  • Pour oil from the engine and transmission nodes, replace it with a new one;
  • Next 4 hours give the walk.Behind tractor to work on 2/3 engine capabilities.

Also do not forget about the load limits and after the end of the running.In. Carry out regular technical inspection and repair.

HONDA GX 390 (Lifan 188) 13 л.С. Полная детальная сборка. Ремонт двигателя генератора Fubag.

Lifan motor locks with engine

This model is about 30 hours, performing simple work with minimum loads. When running in with mounting equipment, the following rules should be remembered:

| Denial of responsibility | Contacts |RSS