How to start the STIHL chain saw ms 180

Step by step instructions

With the brake activated the assembly process is much slower so that it is still safe and comfortable to operate the machine without the brake equipment.

If a person is not confident in his knowledge and accuracy, the brake on the contrary should be activated. If the correct procedure is followed, the device will not start and the mechanism will not do anything dangerous to a person.

1 schematic diagram of a standard mechanism

  • Before starting the petrol engine, the choke valve, which serves as a regulation lever, should be moved downwards compared to the optimal position. First press the gas button. Only if this condition is met, the slide can be moved properly to the end stop at the bottom. Move the choke and hold the gas button simultaneously. The gas is set in the standard position and the choke shutter closes the carburettor, preparing the machine for proper operation.

Pull the starter knob jerkily

In our quality category you find all chainsaws with an optimal price-performance ratio.

Our other article will also help you make your choice in favor of this or that chainsaw brand.

In Russian-made chainsaws. low price at a sufficiently high quality.

2 the standard mechanics diagram. how to start the saw correctly

  • Switch on the ignition. To do this it is necessary to move the rocker switch to the right place or toggle the switch.
  • The primer usually needs to be pressed more than twice. It is filled with gasoline, and then the device has to be pressed more than three times. Sometimes the chain saw is not equipped with a primer, then you can skip this step.

NEW Chainsaw Stihl MS180 FIRSTART!

Control lever

When the device stalls all the time, you need to systematically start it up again (see. What to do when the chainsaw cuts out when you press the gas). After a short time the engine will pick up speed and should run continuously without stopping.

Start the STIHL 180

In order to start the STIHL MiniChopper 180 when cold it is necessary to follow the procedure described in the manual for the STIHL 180, i.e:

  • Turn the ignition switch on and set the throttle lever to its lowest position (in this position the air damper of the carburetor STIHL 180 cuts off the air flow from the air filter and the throttle is fully open so the fuel mixture is enriched);
  • Pull the starter grip several times until the first flash (the flash signals that the fuel mixture has entered the cylinder and the saw is ready to start);
  • Move the control lever one position up from the fully lowered position (in this position the air damper opens and the throttle remains in the same position as before);
  • Pull starter and starter. The saw starts up and runs at a higher rpm because the throttle is opened as much as possible. To set the choke to idle, you have to pull the throttle trigger and immediately release it, the tool will immediately normalize the rpm.
See also  lawn mower Oleo-Mac Sparta 25 fails to start

The STIHL MS 180 chain saw does not come standard with any additional features to facilitate starting.

Как правильно заводить Штиль 180 видео, How to start Calm 180 video

Read how to start the STIHL 180 below. The video shows in detail all the main points, and Комментарии и мнения владельцев by the author, allow you to understand the whole process to the smallest detail.

How to start the chain saw after a long period of standstill

I can’t start my chainsaw after a long period of standstill. Such Комментарии и мнения владельцев can be found on forums devoted to the repair and operation of saws. Let’s find out how to start the chainsaw after a long period of inactivity.

The thing is that it is necessary to take care of the successful start after the downtime and to prepare the saw correctly for storage. According to the manufacturer’s instructions, you must drain the fuel from the tank before storing, then start the engine and finish burning the fuel in the fuel system.

Preparation is necessary so that during storage, the carburetor membranes do not stick together. Performing this simple operation allows you to start the saw successfully after a long period of storage.

It is much easier to start the chainsaw after half a year of non-use if, immediately before the start, 1 to 2 ml of fuel mixture is added to the cylinder through the spark plug hole. You can do this with a syringe.

Peculiarities of starting the tool

To start the tool, several processes need to occur simultaneously:

  • fuel mixture must be fed under the engine piston;
  • It must shrink as much as possible;
  • At this point, a spark must be present to ignite and start the tool.

Each of these processes takes place the moment you pull the starter grip. When using a new chain saw, don’t forget to run it in.

However, in reality, it is not so simple. The fuel to start the tool in hot and cold engine mode should differ in the quality of the air mixture. So, a hot engine can start with a normal air level that will ensure its stable operation and will normally keep the idle speed. However a similar amount of air will be enough to start a cold engine. Before starting the chainsaw, the starter must be pulled about 10 times, and possibly more.

start, stihl, chain

To reduce the amount of air and increase the fuel supply in the carburetor of the chainsaw, a special choke is installed, which is responsible for regulating the amount of air when starting the engine. The engine can be started quicker with the saw, so the starter motor and the saw’s working time will be longer.

See also  Why the chain on an electric saw comes off

It is very dangerous to start the saw where you are filling up.

STIHL 180 ms chain saw

Sawmill is a design in which the longitudinal sawing of wood, beams, planks and other wooden objects is performed. It is also possible to create a sawmill on your own, using a chainsaw as the basis. Next, watch the video about the saw from a STIHL chainsaw 180 ms:

To construct a sawmill the owner used such materials:

Elevators are needed for the sawmill to work in a technically correct way. They are used to adjust the height of the board. Their number. at least three (for board height 45 mm, 35 mm and 25 mm). It is difficult to say exactly how much material is required to make a sawmill, this amount depends directly on the size of the construction.

Useful video about the sawmill made from a chain saw:

Sawmill. a complex design, more designed for professionals who develop the business of making wooden furniture, boards, blanks. Such a construction is not useful if the amount of work with wood is small. For domestic work, you can use such an auxiliary accessory as the “angle grinder” attachment on the STIHL 180 ms chain saw.

Start the STIHL 180

In order to start the STIHL chain saw 180 in cold conditions, it is necessary to follow the algorithm specified by the manufacturer in the STIHL chain saw 180 manual, namely

  • Switch on ignition and move the choke lever to its lowest position (in this position the choke shutters cut off the airflow from the air filter and the throttle is fully open so the fuel mixture is enriched);
  • Pull the starter grip several times until the first flash (the flash signals that the fuel mixture has entered the cylinder and the saw is ready to start);
  • Move the control lever one position up from the fully lowered position (in this position the choke opens and the throttle remains in the same position as before);
  • Pull starter and start. Start the machine and work at higher rpm because the throttle is open as much as possible. To set the choke to idle, you need to press the throttle trigger and immediately release it, the tool will immediately normalize the revolutions.
See also  Do I need to add oil to my chainsaw?

The STIHL MS 180 chain saw does not come standard with any additional features to facilitate starting.

Starting a Stihl Chainsaw the correct way. NEVER flood it Again!

Below you can see how to start the STIHL 180. The STIHL STIHL STIHL STIHL STIHL ST 211 C-BE is a step-by-step guide to getting the chain saw in the cold.

Starting the STIHL MS 211 C-BE

The STIHL MS 211 C-BE has an additional manual fuel pump for easier cold starting.

The instructions for starting this STIHL chain saw include one extra point: before starting the STIHL model when cold you must pump fuel into the carburetor with a pump. Further, the instructions are the same as for starting the STIHL 180 and follow the same algorithm.

What happens when you pump the primer and how it helps you start the machine more effectively?

When starting the saw without primer, the starter motor needs to move several times to allow the gasoline pump to pump fuel through the impulse from the crankcase.

The pump, installed in the fuel line, allows pumping gasoline into the carburettor in manual mode, without unnecessary movements of the starter. The effect is obvious. the saw will start much faster.

Many gasoline tool owners, mistakenly believe that the hand pump can pump too much fuel into the carburetor and for this reason will flood the spark plug. This is fundamentally wrong, t. к. the system is able to circulate. Excessive gasoline from the carburetor will be directed, through a special hose designed for this purpose, back into the tank.

It’s not necessary to use primer on a hot chainsaw, because the. к. The fuel in the carburettor is sufficient to start.

Briefly about the starting device

The chainsaw is powered by the combustion engine. It is a simple device, which does not have any special design. It usually works properly even in harsh conditions.

start, stihl, chain

The function is ensured by structural elements:

  • Carburetor engine (cf. carburetor adjustment).
  • Centrifugal-type clutches.
  • Ignition system, on most machines contactless.
  • Carburetor that adds air to the fuel mixture.
  • Fuel system. Its standard arrangement consists of a hose, filter, and gas tank, but it sometimes has additional parts.
  • Starter.
  • Tire.
  • Chain (cm. chain oil).
  • Chain tensioning mechanism and brake (see. how to sharpen the chain).

How to assemble the STIHL ms 180 chain saw

STIHL mc 180. , 40

STIHL mc 180 3, 9. 35 30 2. 0,25. 45-55

,. ,

start, stihl, chain

180 35. 14, 14 40. 180 16. STIHL mc 180. 40. ,. ,

, 180 ,

, ,

180 :

,. ,. :

,. , ,

, 180.

, 180

| Denial of responsibility | Contacts |RSS