How to trim a round tablecloth

Wide tablecloth edging. MK. A tablecloth for a round table with your own hands

Tablecloths used to decorate only the holiday table, but today they are an indispensable element of the interior, able to correctly set the accents not only in the kitchen, but also in other rooms of the house. And if you make a tablecloth with your own hands, you will also get an exclusive product, specially created according to your preferences.

In principle, the technology to create festive and everyday items do not differ significantly, it is just necessary to correctly approach the choice of material, shape, size calculation, as well as decorative framing.

How to trim a tablecloth for a round table

Many people often ask how we do this or that operation. We’re not super-professionals, our methods may not be perfect, but we do what we do with love and are happy if you like our little results and ideas. So we are pleased to share our know-how with you)))). I absolutely do not think that my method is the only one of its kind, but I find it very comfortable and effective looking)))).

So, on the agenda of today’s meeting is a global issue “How to sew a beautiful round tablecloth“, decorating it is not just a slant, and a wide edging of another fabric)))).

First we need to determine the size of our tablecloth. Is considered a comfortable hanging 20-25 cm, but we are all different and who may make a tablecloth with a different hanging. Since this tablecloth was sewn to order, and our table is of a smaller diameter, then the hanging in this case is much more.

So, for a table with a diameter of 100 cm we took the basic size of the piece 1.51,5 m. The material is decanted (but better still, let it be pre-soaked) and cut out a circle with a radius of 75 cm. I do it very simply: I fold the fabric in 4 times and having attached the edge of the long ruler to the corner, just outline the desired radius, moving the ruler. The main thing is that its beginning was always in this angle.

Then we’ll cut a slash. I do not recommend making it too wide, as it will be very difficult to lay it out perfectly. Ideally, the width of the tape should be 6-8 cm. If you are not planning to sew just one tablecloth, but many, you can use the following instructions for the oblique stitching. Since I have only one tablecloth like this now, and I don’t need this wide sashing very often. I just cut 3 strips into slashes (polka dots are even more convenient to cut) and sew. The approximate length of the needed bias binding can be easily calculated by remembering elementary math:

The length of the circle = PI D, which is 3.14 nash diameter of 1.5 m = 4.71м

Now comes the most important moment. We need to iron the sideline so that it lies in a circle. With a hot iron under a large steam supply forced to make such a semicircle and gradually move the entire length of the tape

Let’s take our tablecloth base. Put a slash on the wrong side so that its wrong side is also on top. and with a large radius of rounding to the needle. And at a distance of 5-7 mm from the edge we start stitching all around)

Carefully fumbling with the iron, so as not to stretch the concave edge of the selvedge, outcast our seam to the side of the tablecloth base.

Once we once again went over the entire diameter, begin to form the edging on the wrong side. You don’t have to do it like that, but I think it looks more effective, neater and expensive). again, wielding the iron around the entire circumference and carefully lay an edging of 1-1.5 mm.

After everything is stitched and steamed. Begin forming the face of our tablecloth. Carefully bend the hem by 1 cm and immediately iron this hem and poke it with needles. Always check yourself with a ruler that the width of the hemline is not “floating” and you haven’t pulled out too much)))

Congratulations ! Our tablecloth is ready. Cut off unnecessary thread tails, steam once more, and enjoy.

Tablecloth for a round table

Fabric cuts come in different widths, so make sure you check the fabric description and measure the table lengthwise and crosswise a few times. If the table is small, there won’t be any problem. But if it is very large, you will have to sew the tablecloth in the middle, and it will not look very pretty. So, we suggest starting with a small table.

Write down the diameter of the tabletop, then measure the circumference of the table. This is needed to know the length of the tunnel tape and ruffle you will sew onto the tablecloth. The width of the ruffle can be chosen at your discretion, but enough and 25 cm with allowances for seams (1.5 cm).

See also  What is the best 18650 battery for an electric screwdriver?

If the table is small, you can turn it upside down. This will make it easier to trace the outline on the fabric. So, trace the tabletop with chalk or a marker, then indent 1.5 cm and cut out a circle.

Now cut the strip that will become the edging on the sides. You may need 3-4 of these strips to get the right length and then sew them together.

To beautifully sew the strips, tack or pin them together face-to-face. Now sew all the strips together. To prevent anything from pinching inside, iron the sewn edges and stitch them together. This is easy to do with a twin needle on the machine.

Sew or pin the tunnel strip to the edge of the tablecloth on the front side. Then use a sewing machine to sew it together.

In the same way, sweep a frill of rectangular strips face-to-face on top of the tunnel ribbon. And sew with the sewing machine.

Now you can turn the tablecloth inside out. If the fabric is not torn along the edge, you can leave the seam allowances in place. But if you want to finish the tablecloth to perfection, turn the edge of the ruffle by 1.5 cm and sew it with a machine. This will give your tablecloth many years of use and keep its acceptable appearance.

At the very end, sew the side ruffle edges together on the machine. Done.

With waterproof tablecloths, your table is intact and your child is happy. Goodbye to hours of scrubbing the art from the wall and papering new wallpaper! After all, there’s a whole table for creativity.

Yarns Valencia Arabella (550m/100g) and Valencia Arabica (400m/100g), hook

The video should load here, please wait or refresh the page.

Crochet Crochet Circular Tablecloth, Part 1

Yarn Art Violett cotton yarn (50gr/282m), hook, 75.

The scheme is filigree, you need to be able to knit stitches with a stitch and air loops.

Video should load here, please wait or refresh the page.

Fabric preparations

So, let’s start with preparing the fabric. We need a piece of fabric of the right size. We have double hems, so we have to take into account the width of the hem in the size of the fabric. Add the width of the first and second hems and multiply by 2 to get the hems on the width and length of the cut. For example, we need a tablecloth of 1,5 by 1,5 m, we do 22 cm for the fold, so the piece must be 158 by 158 cm. If the hemming is 1.52,5 cm square cut of the same 158 x 158, if the hemming is 23 cm square cut of 160 x 160, etc.д. The principle is that the first hemming is less than or equal to the width of the second hemming. On rice. 1 our piece of fabric, in this case is a width of 1.6 meters a length of 4.1 meters (for a large banquet table). Fabric. white cotton with embossed pattern. In order to have an even hemming and nothing interfered with the edges should be even, and the protruding threads are removed. The threads can be cut (Fig. 2) or scorch, but in our case with cotton fabric scorch will not work, t.к. the fabric does not melt but burns. Burning (burn) well silk, chiffon, organza, tulle and synthetic. Finish all the edges of the fabric and obtain a straight piece of fabric (Fig. 3). Now you can start folding the edges.

Before we start hemming we need to decide on the width of the hem. In our case the hemming will be the first 1.5 cm, the second 2 cm. For this purpose we bend the first edge of the fabric on 1,5 cm, control the bend with a ruler (fig. 4), for the convenience of stretching the fabric use a clamp (we have a clamp, you can use any other means at hand or a heavy object, or even a knee, elbow, or use the service of an assistant). Bend and stretch the edge of the fabric in length and measure the same 1.5 cm. For small irregularities of the edge of the fabric take a long piece and watch the width of the straight areas (5).

By the way: it happens that a piece is made unevenly or with small irregularities, so not to cut anew, you can adjust the bending. In this case it is better not to make a symmetrical hem, and to do the first hemming already the second.

Making sure that the edge of the fabric you have folded exactly the width of the hem by 1.5 cm. Crumple the edge by drawing and clamping the fold with a ruler (Fig. 6), you can hand or other object. Then iron the folded edge of the fabric (Fig. 7).

See also  How to remove the carburetor on a Husqvarna 236

Tip: When ironing the folds, it is convenient to use an iron with the “steam blow” function that allows you to spot moisten and iron the “unreachable” fold and not to wet the work surface.

Going along the whole edge of the fabric we have a finished first hemming (fig. 8) and we can proceed to the second hemming. Pressed out the beginning of the first hemming at 1,5 cm, we fold on 2 cm more (fig. 9). Use a ruler to control the width of the second fold. we need 2 cm (Fig. 10). Carefully press out the second fold, so you can press the beginning of the second hemming clamp (fig. 11). Any bending should begin precisely, without skewing, otherwise you have the whole edge can go crooked. Fix the beginning of the edge with the second hem with a clamp, check the evenness of the fold and its width with a ruler (fig. 12). We get the beginning of the second bending 2 cm wide By analogy with the first bending, bend the edge to length, control the width of the fold with a ruler, crease the fold (Fig. 13) and iron out (Fig. 14). Smoothing the edge of the fabric with the second fold, fasten the fold with pins (Fig. 15) for fastening the edge and convenience in further processing. If the fabric is pliable and holds its shape, then the pins can be fastened not so often, once every 30-50 cm is enough. Here is one edge of our future tablecloth already folded and fastened and ready for further sewing (Fig. 16) only need to do the hemming of the other 3 sides and make the corners. Processing the second edge of the fabric by unbending the hem of the previous edge (Fig. 17 action 1), fold the second edge by 1.5 cm and clamp (action 2) and control the width of the fold (action 3). Similarly to the first edge we bend, stretch (fig. 18), crease, iron and control the width of the first hem (fig. 19). We do the second hemming in the same way as with the first edge of the fabric (fig. 20). Do not forget to control the width of the fold. As a result we have four finished fabric edges and such corners (fig. 21).

Cotton

Cotton tablecloths are easy to smooth out with a hot iron after washing. Also, percale is added to such products, which allows the item to retain its appearance even longer.

Choosing a model for every day, it is better to settle on neutral shades.

Excellent moisture absorption will ensure the longevity of your furniture, but the product will quickly lose all the charm of appearance.

It is impossible not to mention the rather low price compared to other materials.

How to sew a tablecloth with your own hands?

To make this one, you need to cut a rectangle out of the fabric. It should be larger than the table top by about 15 cm on all sides. Turn the edges of the billet, stitch them with a machine. To sew these tablecloths further, cut a ribbon from the fabric. If the fabric for the tablecloth has, for example, a white background and green flecks, then cut a ruffle out of a monochrome green. In the same way, observing the color scheme, cut out ruffles and from other fabrics.

To make such an edging, as in the photo, it must first be processed with an overlock on one and the other side of the tape. If you do not have this kind of crimping, then simply twist the edges on both sides, stitch.

Read how to make a round tablecloth. If you have a table in this shape, then this will do.

Measure the diameter of your table, divide that figure in half to know the radius. Fold the broadcloth in half, then in half again. From the center corner, measure on the diagonal the calculated radius, add to it how many centimeters you want the future product to hang down the sides.

Next, the round tablecloth is worked around the edge. If you have a sweep stitch, you can do it with it. If you don’t have one, use a slash. Fold it with the edge of the tablecloth facing each other, stitch on the wrong side. Iron the seam, turn it on the face, sew it on this side, folding the edge inwards.

If you do not have a ready-made diagonal braid, make one yourself. Cut the fabric diagonally into strips 2.5 to 3 cm wide. They will pull well, which is what is needed for this kind of work.

If you wish, your round tablecloth will be made in a slightly different way. Place the fabric on the clean floor. Turn the tablecloth over on it. Draw the tabletop onto the fabric, cut it out and allow 1.5 cm for the seam allowance on all sides.

See also  VIKING hb 585 cultivator oil change

From the same or other fabric cut the ruffle. Work this detail from the bottom, sew along the edge of the tablecloth, making this edging a pleat at the same distance. Or sew it on first, and then sew it onto the edge of the tablecloth.

You can make not one, but several such ruffles.

The same way to create a tablecloth for an oval table, only made in the form of its tabletop. Those who know how to embroider can decorate it this way.

A tablecloth for a rectangular table can be like this.

Then cut a rectangle for the tabletop by its size, sew on the sides cloth cloths equal in length to the distance from the table top to the floor. It is usually used for decorating banquet and wedding tables.

In the latter case, this is a good idea for the decoration.

The sides of the tablecloth are edged with a cloth with evenly laid pleats and decorated with a rectangular piece of silk fabric.

Tablecloth for a round table

This round tablecloth is sewn a little differently. You will need a suitable fabric, which can be cotton, linen or any other fabric of your choice.

You will need to measure the diameter of your table. Determine for yourself the length of the hanging, add this value to the diameter. Take into account an allowance of 2.5 centimeters. Cut the fabric and then fold it twice. If you don’t have enough fabric, you can sew it from two or more pieces. The edges of the cloths should be sewn with each other, stepping back from the edge by a little more than a centimeter. Then you will need to smooth the seam, you can do it with an iron.

You will have a small square. With a centimeter tape lay a diagonal line for a trimmer from one corner to the other. Mark half the diameter of the fabric on the fabric. The mark made will help you draw an arc to the corners of the square. Then you will need to cut the fabric along the line you made and unfold the fabric. You will have a circular cloth.

You can do it another way. When you have a folded square of fabric, make a template of paper on it, draw an arc there with a compass, it should be at one edge. You will have a template that you can cut your fabric from and get a round piece.

Then you will need to iron the fabric to get rid of the creases. At this stage you can finish, if the edges look decent. But if they are crumbling, tuck the edges twice and stitch. You can sew lace or satin ribbon to the edges, summer will look noble.

If the shape of the table is oval, you will need a tablecloth pattern. First make a paper template. To do this, take a large sheet of paper, lay it on the surface of the table and mark the cut lines. Cut out a template, put it on the fabric, add 20 centimeters for the hanging edges, plus 1 centimeter for the sag. After that, you can cut the fabric and make the tablecloth.

How to sew a tablecloth with your own hands.

Who would have thought choosing a tablecloth would be so difficult? Tablecloth Selection. This is a difficult decision, which must be taken responsibly. It is not as easy as it may seem. We need to consider the design.

No man can do without tablecloths. For a pillowcase, sheet, duvet cover do not make patterns on paper. The drawing is made directly on the fabric. And questions, how to sew a pillowcase from a single piece.

To furnish a child’s room, parents try to use as many cute things as possible. Their list includes such a blanket, which not only looks cozy, but also warms the baby in cold weather. What is a blanket.

There are a huge number of techniques used to decorate interiors or decorate clothing. Carpet embroidery art will decorate elements of the interior. pillows, plaids, etc.д., As well as clothes, accessories, etc.

There is a huge selection of ready-made products in stores, but it is difficult to find the perfect match for the design of the room or embodying a fully conceived solution. You can go to the studio or do it yourself.

Terry towels are dirty and need washing? No problem. There’s the washing machine, the powder. No appliances. there are hands. It seems to be simple. Why do housewives end up dissatisfied?? From the fact that.

| Denial of responsibility | Contacts |RSS