How to turn on a trimmer for grass gasoline champion. Trimmer’s traction malfunction for grass
Proper operation of a trimmer for grass for grass
In every summer village, village, suburb and in the city itself you can see these devices: they work tirelessly, aligning the lawn grass, cleansing the space of squares and parks, gardens and gardens from thickets of burdock, wormwood and weeds. The noise and crackle from the trimmers are heard from the beginning of summer to autumn, until the growth of the grass is so much so that it will no longer need to trim it. Automatic braid for grass deserved its popularity for the simplicity of the device and operation. It is easy for her to use, it is easy to care for, and in case of breakdown it is not possible to easily fix it without difficulty. The article will just tell you how to use a trimmer for grass correctly.
As with any other technique, in working with the trimmer there are rules. First you need to make sure that the main nodes and assemblies: screw, rods, handles and motor. If the device has not yet been assembled, then it should be correctly assembled according to the instructions.
In the case of a gasoline trimmer, it is necessary to check the gearbox for lubrication. Also, do not forget to add lubricants to the fuel tank, if the instruction manual is evidenced. As a rule, gas and oil are mixed in a ratio of 45 to 1, but these indicators may vary depending on the model and manufacturer, so you should carefully study all the technical requirements for the device. The fuel container must be filled on the very neck. If all technical fluids are flooded, then you can try to start the device. But it’s not worth mowing right away, it will be better to let the trimmer work without load so that the engine works to the flooded fuel. A few minutes will be enough, after which you can give the motorcycle full load.
With an electric trimmer, everything is much easier. Having made sure that the gearbox has the required amount of lithol, you can start work. No additional measures are required. Unless it is necessary to make sure that the carrying does not run on the path of mowing in order to avoid possible damage.
When the device itself is ready to work, you should make sure that there is nothing around that could interfere with the work. If possible, the estimated mowing area should be cleaned of snags, glass, stones and other solid objects that can damage a knife or fishing line for a trimmer.
It is better if other people do not approach the trimmer while working. Usually the recommended distance is at least 10-15 meters in order to avoid small debris (mulch) in the eye and on the face.
Depending on the upcoming work, you need to choose a nozzle for a trimmer for the grass: a screw-knife for weeds and hay, a fishing line for a trimmer for lawn grass or a disk saw for shrubs. Mowing should be in the opposite direction from people, if possible, moving away from buildings and buildings. You should not get too close to the fence and other designs, since the fishing line for a trimmer can catch on sharp edges, and the screw-knife will bend if it accidentally offends it a hard object.
The preparation of the device itself will not take much time, all modern models of devices are designed to facilitate and simplify their operation, starting to work in the shortest possible time.
Champion T436 Operating Instruction Institution Online. Page 7
The Champion T436 Instruction for the device contains pages in Russian.
File size: 677.06 KB. Consists of 20 pages.
You can download PDF file of this instruction: download pdf
To prepare the fuel mixture,-
Choose a suitable nozzle
In addition to its product, the manufacturer usually provides several mills (usually 3).
To work with soft grass as a cutting element, a fishing line for a trimmer is used, wound on a drum. Speed of 9,000 revolutions per minute allows you to quickly process even a large lawn.
For more rough grass and thickets, one of the metal knives can be used, which differ among themselves by the number of cutting teeth.
For mowing thick shoots, reeds, young shrubs, a disk with 40 or 80 teeth is designed. Corn, dry weeds with thick stems, you can mow three- and four-lobed milling.
How to Start an Engine Without A Starter
And in order to put beveled grass in the rolls, a knife with 8 blades is used and a special crest is attached to the braid itself.
And now more about how to install a cutter. The place of fastening of the cutter is called a gearbox. On it, first you need to fix the figure washer using a hexagonal key.
Then put on a knife, combining the holes in it with a protrusion of the puck. After that, you need to install the upper figure washer on the shaft and tighten everything with a nut.
Here you should pay attention to the fact that the thread on the shaft is left, so you need to tighten the nut (like screwing the mowing head) counterclockwise.
To squeeze the nut to the stop will help the key, which is also in the delivery kit. You can replace the cutter by doing all the operations in the reverse order.
The maximum engine power is 6500
Overseas of the engine speed at maximum
Direction of rotation of the cutting part of the instrument-
Maximum rotation frequency of a knife (column./
Sound pressure level in dB in accordance
Technical characteristics can be changed without prior notice.
SPECIFICATIONS. 3VEVENTION. 4.Use for its intended purpose. 4.Comprehensive trimmer for grass. 5 general safety regulations. 6 fuel and oil. Eight
Recommended fuel. 8 Preparation of the fuel mixture. Eight
ENGINE STARTING. 10 launching a heated engine. 10 installation of the engine. Ten
Using and maintenance of a trimmer for grass. 11th of cutting cord in a mowing head. 13.Air filter. 15 fuel filter. 16 lights of ignition. 17
Maintenance and storage. Eighteen
Service recommendations. 18 tables for maintenance. 18. Nineteen
Introduction, use as intended
Dear user!Thank you for the purchase of Champion products. In this manual, it-
Den Rules for operating the Champion tool. Before starting work, read the leadership. Operate the tool in accordance with the rules and accounting of safety requirements, as well as guided by common sense. Save the instructions, if necessary, you can always contact it.
The Champion Garden Technology line is constantly expanding the new fashion-
Limi. Champion products are distinguished by an ergonomic design that ensures the convenience of its use, a well-thought-out design, high power and performance.
Due to changes in the technical characteristics of the hand-
Water may not fully comply with the acquired tool. The manufacturer reserves the right to make changes to the design of the delicious nodes and parts that do not worsen the consumer properties of the product, without prior notice. Keep this in mind when reading the operating guide.
How to get a lawn mower: Action Procedure
To start a gasoline trimmer for grass, you must do the following:
- Close the air conditioning by shifting the lever.
- Turn on the ignition. For this you need to turn the key or handle to the appropriate position.
- If there is a manual fuel pump on a gasoline, then you need to press it 2-4 times until a combustible mixture appears inside the primer.
- Put the device on the ground. Click with a knee on the part where the engine is located, and slowly pull the starter handle until the moment when the resistance appears (the so.Called hook). It is necessary to ensure that the gas mowing disk is currently not in contact with anything.
- Then, with a sharp movement, it is necessary to stretch the cord on yourself 3-5 times.
How To Fix a Riding LawnMower That Will Not Move or Drive
Когда триммер для травы заведён, заслонка открывается и фиксируется в среднем положении. Before operation, you should wait about five minutes. Let the lawn mower will work at idle.
If you cannot start, you need to open the damper again. Otherwise, the candle will flood the fuel during subsequent movements of the cord. After that, you should 2-3 times start an open handbrake engine. If you can’t start it, you need to close the damper and try several more times.
The warmed motor is started elementary: its switch is put in the working position. Well, then the cord pulls to the start.
The common mistakes, which are often made by inexperienced owners, include the launch with unknown ignition or making jerks for starting more than five times when the damper is closed.
The most frequent breakdowns arising during the operation of the unit are:
- The engine does not work, the trimmer is not started for grass;
- The engine manages to start, after which it does not hold back and stalls sharply and for no reason;
- The rod of the motorcycles vibrates greatly;
- The gearbox overheats greatly;
- Weak turnover at the cutting fishing line.
Before you start repairing, study the instructions that must be in the kit to correctly diagnose
Security is most important
In order for the use of the device to evoke an extremely positive impression in the user, it is necessary to observe several important safety rules:
- Before carrying out the work, it is recommended to clarify, check the possibility of the appearance of any extraneous object on the site: stone, branches.
- To warn in advance outsiders, especially children, so that they do not approach the working device closer than 5 meters.
- In order to avoid vision problems, work exclusively with glasses with a special frame.
- Visually inspect the device for searching for damage to the case or untouched part. If possible, immediately eliminate the malfunction.
- Comply with the rules of mowing grass. Do not mow grass higher than 20 centimeters. Do not clean the grass more than 1/3 in one pass.
- If you work on a slope, it is recommended to move along the hill. Do not use the “Up/down” technique.
- Stop the engine with changes in the height of the bevel.
- If any extraneous item that interferes with the operation of the device gets into the mower, then it is necessary to immediately stop the device and clean the knives.
Note! First of all, non.Compliance with the rules can lead to the creation of health problems and technicians.
Thus, we can say with confidence that a gasoline lawn mower deserves the respect of customers, both capacity indicators and the quality of the work performed. It is important to comply with all of the above rules, recommendations for care, operation and safety rules. This will help ensure the apparatus durability, performance.
- trimmer for grass gasoline champion which is better. Power choice
- How to mix oil with gasoline for grass trimmer
- How to refuel a trimmer for grass with gasoline. How to determine a violation of the proportion of mixing
- How to lubricate a trimmer for grass gasoline. How to lubricate and add -in -lubrication in the gearbox of an electric trimmer for grass