How to wind a cord on a trimmer for grass. Two working antennae

Learning to correctly wrap the fishing line for a trimmer to the coil of a trimmer for grass and lawn mowing instructions for installation

Owners of private houses know how necessary the type of tool is such as a trimmer for grass. It can be gasoline and electric, and they differ in the design of power units. For injection of grass in areas where there are stones, trees and other obstructing objects, a fishing line for a trimmer is used as a cutting device. This consumable in the process of use wears out, so how to wind the coil of a trimmer for grass, we will consider in detail in the material.

Fishing lines is called consumable, which consists of nylon, and serves as a cutting device. Through this equipment, the grass grows, which is ensured due to rotation of the instrument head with a high frequency. This material has a different thickness, which depends on its use on the corresponding tools of low-power (from 1 to 1.6 mm), electric from 500 W (2-2.4 mm) and gasoline trimmers for grass with motorcycles (from 2.4 up to 3.2 mm).

The more powerful the tool, the accordingly there should be a cutting equipment. This affects not only the quality of the injection of grass, but also on the life of the material. If you ask the question of how to wind the coil of a trimmer for grass, then it’s time to change the reload of the tool. With the onset of spring, this issue is becoming more and more in demand, so it’s time to understand the step.By.Step instructions for replacing the fishing line in the coil of the trimmer for grass.

Types of heads for trimmers

A trimmer is a tool that is used to combat vegetation in a summer cottage or household territory. Grassing and hay harvesting for cattle implies the use of benzo or motorcycle. The heads of different types are installed on trimmers for the grass, through which the grass and other vegetation occurs.

EASIEST WAY TO STRING YOUR WEED EATER

The heads are classified into three main types that differ not only in design, but even in price, the method of operation and service life. Consider all types of heads for trimmers, as well as their technical features.

Fishing lines winding algorithm

The procedure for winding the fishing line depends on the type of coil. With one or two antennae, as well as with automatic charging the cord.

On a reel coil

Winding a fishing line for a trimmer to a coil with one osik is very easy. In such structures, depending on the brand of a trimmer for grass, from two to five meters of the cord is placed. The edge of the fishing line in the spool must be tucked into a special hole or groove, after which the string is wound in the direction opposite to the rotation of the coil during operation.

Advice! To understand which way to wrap the thread, you should look at the corps of the spool. Usually marks are made on it indicating the direction of movement of the coil during operation.

After the fishing line for the trimmer is windpowed, you need to leave a small piece (15-30 cm), walk into the output of the spool and collect the head again.

To a coil with two antennae

In the rogues of this type, you need to inspect the inside of the coil and determine the number of grooves for winding the cord provided for in it.

Important! If there is only one gutter in the coil, then both antennae must be wrapped in a common groove, if two, then on separate paths.

For winding, you need to take a piece of fishing line with a length of two to three meters. For a spool with one groove, tie a fishing line for a trimmer into a through hole, combine a mustache, leve and wind it up in the direction in the direction of its rotation during operation. If fixing grooves are provided, they need to go through the ends of the cord, then stretch them into the output, and then close the coil and put them in the same place.

For a two.Lep mewood, the difference is that the section of the string should be folded in half. Next, it is necessary to charge the middle of the bend into the groove between the grooves, and then wrap each of the pieces of fishing line on its path, fix the antennae and assemble the coil as well as the spool with one path.

On a trimmer head with automatic dressing

For heads with automatic refueling, it is enough to just start and squeeze the edges of the fishing line, and the tool will perform further winding on its own when turning on. It is impossible to make a mistake here, because the coil itself recognizes how the antennae should be located.

On a note! The advantages of trimmers with such a head include the convenience of laying the cord, and the disadvantages. High cost and complex repair.

Preliminary preparation

First of all, to wind the fishing line, it is required to remove the coil (bobbin, spool) from the trimmer for the grass. Specific actions will depend on the complexity of the configuration and the type of product itself:

  • Small electric trimmers for grass with a working location of the engine and coils in the lower part, as a rule, have side keys on both sides of the bobbin. With the simultaneous press on them, the upper part of the coil, along with the internal contents for winding the fishing line, is disconnected, while the lower remains on the trimmer. It is advisable to analyze the bobbing in an even smooth place, so that the spring does not jump out and not be lost;
  • Electric and gasoline trimmers for grass with a curved rod without the ability to install a knife, as a rule, have coils with a special lamb: in such structures, you should hold the spool in a fixed position with one hand, and rotate the fixing bobbin on the bar with a barack’s baracks. After disconnecting the nut, the whole bobin is removed.
  • Electric and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and, with slow rotation, such a mutual arrangement is achieved when the screwdriver enters the hole and the bob is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third cases, the coil, depending on the design, are versed in various ways. In the bobbins with a lamb, lamb is twisted, in the reels with latches, latches-fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then it is enough to turn them with your hands in the opposite directions until they are completely developed.

Features of the use of trimmers

A trimmer for grass, mowing grass with a fishing line, can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, a row in a garden plot.

wind, cord, trimmer, grass

Such a convenient, and most importantly, effective device, like a trimmer for grass, exists in several variations:

As the names understands, the types of trimmer for grass are noticeably different from one another. But regardless of the type of this tool, its cutting element can be a fishing line for a trimmer. Of course, a trimmer tilted for the grass for a trimmer is not infinite. And sooner or later it will need to be replaced by a new.

Fishing consumption directly depends on the frequency of using the device and the scale of the work performed. The more herbs are brazen and the more often it is trimmed with a trimmer for grass, the more actively a fishing line for a trimmer is consumed in it. And, accordingly, the faster it will end. In this regard, the question arises: how to refuel a fishing line for a trimmer to a trimmer coil for grass?

Not everyone knows the answer to this question. But the winding of the fishing line on the coil plays an important role in the work of a trimmer for the grass. To make the device normally, it is very important to correctly wind a new fishing line for a trimmer to a reel. About how to change a fishing line for a trimmer on a trimmer, and will be discussed in this article.

How to remove a fishing line for a trimmer

To replace a fishing line for a trimmer in a trimmer, remove the head cover. To do this, press the fingers of the latches of fixers located on both sides of the lid, and pull the lid up. Access to the coil will open. After that, pull it out, pulling up the axis on which the coil sits. If the ends of the fishing line stick out from the holes of the head, then lift the coil along the axis and pull the remaining fishing line from the holes of the head. Now the detail does not hold anything and it is easy to remove and remove the remaining working thread.

The coil is divided into two parts by the central partition with a neckline. Different models of cobs differ in size, so you need to check how much you can wind the fishing lines on the bobbin. Its length ranges between 1 and 4 m.

The choice of fishing line

In order to easily wrap a fishing line for a trimmer to a trimmer coil for grass, it is worth deciding on what tasks the garden tool will perform. The thicker the thread tucked into the head, the more difficult the tasks that it can complete. It should be noted that a universal thread is often used, the width of which does not exceed 2 mm. You, in turn, can decide on the size, using the following methods:

  • Get acquainted with the information set out in the instructions from the manufacturer;
  • Check the suitability of the fishing line for use on your own, trying to insert it into the coil hole;
  • Study the spool for information about diameters allowed for use.

Selection of fishing line for refueling a trimmer for grass can be carried out by engine type. So, for example, an overly thick thread can affect an increase in rotational resistance. Because of this, the load on the engine will increase, which will certainly affect the quality and timing of its further operation.

Best String Trimmer (Battery Powered)? EGO, Milwaukee, DeWalt, Ryobi, Kobalt, Makita, Atlas, ECHO

Avoiding negative consequences is easy. To do this, it must be borne in mind that for electric motors with a power of up to 500 W, a fishing line for a trimmer with a diameter of up to 1.2 mm is ideal. If you cannot get such a thread, you can use the cord by 1.6 mm. A thread with a diameter of 2 mm, in turn, is used for engines with a power of more than 1 kW. It is worth noting that the cord for 2 mm is often used for winding on a bent mower. If the gasoline device has a straight shaft, the thread should be used 2.5 or 3 mm. The thickest fishing lines are installed exclusively on devices, the power of which is equal or exceeds 1.3 kW.

The last, but no less important factor is the type of fishing cross section. When choosing it, it is worth focusing on the tasks set before the garden tool. There are several demanded cross.Sectional options:

  • Twisted-has a small margin of safety, which is why it suits exclusively for young grass;
  • Substitute. Is characterized by sharp edges suitable for working on overgrown weeds;
  • Round. The most common section. Such fishing lines cope well with fresh grass, but they are not suitable for shrubs and dry ones;
  • Rectangular, square and star type of cross section-due to low strength, are used to work on lawns.

The most durable and universal cord is a two.Component fishing line for a trimmer with a round cross section, inside which the core is located. It is this thread that is suitable for the majority of work. It must be remembered that the use of fishing fishing line, ordinary wire and other third.Party materials as a cord pose a danger to others.

Preparation for the replacement of fishing line

Before replacing the fishing line, you need to pull out, and then disassemble the head. It usually includes a casing, a spring (on some models), a bobbin with a fishing line, a lid.

It is necessary to turn off the electric trimmer for the grass (or drown out gasoline) from the network, and then proceed to remove the coil.

It can be recorded in two different ways: in the first case, it is necessary to completely disassemble the head, and in the second. Just remove the gearbox from the shaft, to which it is attached.

  • A bobbin is located under the lid, it must be carefully pulled out of the case (sometimes a spring is hidden under it, it should also be carefully removed to the side so as not to lose);
  • After removing the spool, it becomes noticeable in the center of the case with a fixing bolt (or screw), which must be unscrewed in a direction opposite to the clockwise movement;
  • After removing the fasteners, it is necessary to hold the body with a swaying movement to remove the coil from the gear shaft.

The second method involves the following actions. Coil head is worn on the gear shaft. To disconnect it, you need to lock this shaft.

Typically, in braids, for example, the brand “Champion” or “Stihl”, for this a hole is made into which a nail, rod or screwdriver is inserted.

After fixing the shaft in a fixed position, you need to, holding the body, start rotating the head clockwise, since the thread on the shaft is usually applied to the left.

Now that the head is removed and dismantled, it is necessary to determine what thickness the cord should be.

You can find out the suitable diameter for your trimmer for the grass by looking at the user’s guide or on the squash itself, it usually indicates such information.

Another way is to insert the thread into the hole from which it is served. If the Sruna is without difficulty, it can be used to work.

On a note! To understand how much fishing line is wrapped for coil, you need to wind it on the bobbin so that the height of the skein is not more than the diameter of the sides. If the cord protrudes behind the edges, the coil cannot be hidden in the casing.

Fishing lines winding algorithm

The procedure for winding the fishing line depends on the type of coil. With one or two antennae, as well as with automatic charging the cord.

On a reel coil

Winding a fishing line for a trimmer to a coil with one osik is very easy. In such designs, depending on the brand of a trimmer for grass, from two to five meters of the cord is placed. The edge of the fishing line in the spool must be tucked into a special hole or groove, after which the string is wound in the direction opposite to the rotation of the coil during operation.

Advice! To understand which way to wrap the thread, you should look at the corps of the spool. Usually marks are made on it indicating the direction of movement of the coil during operation.

After the fishing line for the trimmer is windpowed, you need to leave a small piece (15-30 cm), walk into the output of the spool and collect the head again.

To a coil with two antennae

In the rogues of this type, you need to inspect the inside of the coil and determine the number of grooves for winding the cord provided for in it.

Important! If there is only one gutter in the coil, then both antennae must be wrapped in a common groove, if two, then on separate paths.

For winding, you need to take a piece of fishing line with a length of two to three meters.

For a spool with one groove, tie a fishing line for a trimmer into a through hole, combine a mustache, leve and wind it up in the direction in the direction of its rotation during operation.

If fixing grooves are provided, they need to go through the ends of the cord, then stretch them into the output, and then close the coil and put them in the same place.

For a two.Lep mewood, the difference is that the section of the string should be folded in half. Next, it is necessary to charge the middle of the bend into the groove between the grooves, and then wrap each of the pieces of fishing line on its path, fix the antennae and assemble the coil as well as the spool with one path.

On a trimmer head with automatic dressing

For heads with automatic refueling, it is enough to just start and squeeze the edges of the fishing line, and the tool will perform further winding on its own when turning on. It is impossible to make a mistake here, because the coil itself recognizes how the antennae should be located.

On a note! The advantages of trimmers with such a head include the convenience of laying the cord, and the disadvantages. High cost and complex repair.

Fishing line for a trimmer. Varieties and the ability to replace other material

A cord for a trimmer for grass can be of different diameters (from 1.2 to 4 mm), and it must be chosen depending on which vegetation is required to mow. The thicker the fishing line is for a trimmer, the more rough grass it will cope. Experienced users recommend putting a fishing line for a trimmer 2 mm thick, which is a universal.

The shape of the fishing line can be round (for juicy grass) or with sharp faces in the form of a square or asterisk (for beveling dry grass). The second type is less durable and wear out faster compared to the round cord.

All about the replacement of fishing line with a trimmer head

There are many types of heads that are designed for different types of fishing line. The latter is also available in several diameters: from 1.0 mm to 3.2 mm. At the same time, its section is round (including with a special groove to reduce noise), square, twisted and in the shape of a star.

There are no clear preferences, and this explains the wide variety of forms and diameters in the market. The round shape is usually stronger, but has a worst cutting ability, in addition, when rotation, it makes a characteristic sound. Therefore, sometimes they make an acoustic groove, however, the use of this fishing line makes sense only on battery trimmers, in machines with gasoline and network drive, the sound level of the drive itself practically drowses the sound from the fishing line. The square has a good cutting ability, and despite the fact that such a fishing line for a trimmer is less durable than round, on average it is consumed less. A square fishing line for a trimmer quite easily cuts the shoots of the same Ivnyak up to 1 cm in diameter. The star has the maximum number of cutting faces, mows best and is the fastest consumed.

The next nuance when choosing is stiffness. The fact is that in the production of nylon, a modifier (often maleine anhydride) is added to it, which improves its strength and prevents gaps. However, modifiers are not the cheapest component, they are trying to save on it. Therefore, it seems to be a good fishing line for a trimmer that remained for the winter, in the spring unexpectedly behaves completely differently. It breaks, stops going out normally from the reel. There is a recommendation to soak a fishing line for a trimmer in water before work, but I do not see much sense in this, malein anhydride interacts with water, but if it is not enough in the nylon, then there will be nothing to interact. Therefore, it makes no sense to stock up on fishing line for a long period of time, a breakdown or constantly torn fishing line for a trimmer, which also does not want to leave the reel itself, can significantly complicate the work.

| Denial of responsibility | Contacts |RSS