Huter benzotrimmer stalls when loading.

Huter trimmer does not develop power

Trimmer for grass, electric and internal combustion engine (ICE). An indispensable tool in summer and autumn for owners of cottages and private houses. With its help weeds, small bushes are easily removed, and the lawn is trimmed. But, like any technique, trimmers for grass fail at the most inopportune moment. To eliminate the malfunction with your own hands, the user of this technique must first determine the cause.

The main malfunctions of gasoline and electric trimmers

If you do not take into account damage associated with the rod and mowing head, with the help of a bush cutter and an electric trimmer for grass, mainly engine malfunctions

Damage to gas trimmers

Typical breakdowns of a gasoline trimmer for grass, which are most often faced with the owners of this device:

  • Engine breakdown;
  • Problems with the carburetor;
  • Fuel supply problems;
  • Muffler malfunction;
  • Gear breakdown;
  • The starter is broken;
  • Air filter problems;
  • Cut the fan on the gas tank.

Defective electric trimmers for grass

Since the device of an electric mower is much easier than a trimmer for engine grass, there are little reasons for its failure.

It should be noted that the elimination of some of them is best left to a specialist.

Basically, a trimmer for grass ceases to work normally in the following cases:

Build your home!

What to do if a benzotrimer is not gaining momentum?

If you once purchased a trimmer for grass, working with gasoline, then you probably had to face the problem of turning on a trimmer for grass, as well as a problem as a benzotrimer does not gain momentum.

That is why this article has been created.

So, what to do if a trimmer for grass, working for you for several years, suddenly just stops gaining momentum, and the motor simply stalls? In this case, you and I should consider a number of problems related to stopping the work of the motor.

The motor may stall under various circumstances. Why the lawn mower. I can’t from the ground.And the revolutions are gaining from the floor. Sometimes the reason for the incorrect operation of the trimmer for grass working from gasoline is the clogging of the air filter.

It is the filter that is one of the most important reasons why the operation of a gasoline trimmer for grass may stop.

Various garbage very often gets into it, particles of dust that also clog the filter, so it needs to be cleaned and washed every month, and maybe more often, it all depends on what power the gasoline trimmer has for the grass, as well as then how often do you use this device.

Why stalls the lawn mower: reasons and solutions

The reason why your tool abruptly stops working, namely the engine does not gain revolutions, breaks them off, or “stalls” in popularity, there may be more than one. Often this is to blame not only the engine itself, but also the adjacent systems, unit nodes, completely different details related to the preparation of the fuel-air mixture, its quality, transportation to the tool of the tool. Consider the most typical situations:

  • He is not gaining momentum. The engine drive mechanics may be damaged or there were problems with the carburetor, but the main reason should be considered clogging of the air filter. To change the situation, it must be removed, cleaned, and if it is no longer subject to the latter, then change for a new one, promptly making an order on our website. Also, there will not be a turn of the braid for grass, if the cable from the carburetor constantly flies. disassemble the unit and firmly fix it, or buy a new one if cracks are found on the element, other types of deformations.
  • At high speeds. The lid on the gas tank is clogged. it needs to be cleaned or new. often the reason is a sipped carb. We submit information on the correct adjustment of all screws in information articles. Check the quality of the fuel hose and change it to a new one if necessary.
  • When heated. It occurs in moments when the fuel in the carburetor literally boils. It can also appear in the options if the carba damper is more rare, rotary type (not disk). The only option would be to replace the carburetor with a new. There is another option for a broken wire or ignition coil. In this case, change the element of the latter.
  • Starts and stalls (immediately after launch). Solved or incorrectly adjusted carburetor is the main reason for this situation. Calm vibration will indicate an uneven supply of fuel, and competent adjustment of the node will help to correct the situation.

We hope you found the right answer to the question: why the lawn mower stalls, and all the proposed catalog details today, as always, are at your service. You need a piston trimmer for grass, a new carburetor, or the elements accompanying the operation of these systems. you will find everything in the open spaces of the Benzo SIP store.

What to do if the lawn mower stalls when you press the gas

Most often during the periods when the lawn mower stalls when the gas is added, the cause will be the air damper, more precisely, its condition: it clogged. Structurally, the part is located in the place where the resulting fuel is sprayed behind it, and, accordingly, the product collects all inclusions in low.quality gasoline. To eliminate the problem, you just need to clean it. The same situation can occur with a filter clogged, but it is eliminated similarly. Total, we specify the reasons for which the tool is led to the gas to the stalled state:

  • a clogged air damper;
  • The clogged filter is fuel, and when you give gas, this is especially noticeable;
  • the air of the crankshaft shaft occurs;
  • damaged gasket between the cylinder and the carb.

When you cleared, washed and blowing the elements, but again the lawn mower stall when you press the gas-replace them with new ones, check the quality of the fuel, as well as the literacy of the proportions of the cooked mixture. When opening the air damper, the tool will stall for the following reasons:

  • Dosage carburetor.
  • The appearance of cracks on the fuel hose caused air leaks.
  • The occurrence of problems with the oil seals.

In the process, situations arise when the lawn mower at high speeds is subject to a similar sharp stop. It occurs for the following reasons:

  • due to problems with the circulation of the fuel mixture;
  • with air leaks;
  • The fuel intake hose is poorly connected or cracked and cannot be used;
  • stab or clogged the valve of the cover of the gasoline tank;
  • The carburetor was resolved.

In most cases, nevertheless, the cause will be a carburetor and related filter, hoses. If you need cutting gear or trimmer heads, then our site will also offer them to buy them with gasoline tools and components for them.

The trimmer for grass stalls. how to eliminate the problem

A gasoline trimmer for grass is a useful tool for cleaning from unnecessary grass of house territories and large area lawns. The design of this technique is quite complicated, therefore, if the device breaks, there may be several reasons. The most likely factors that have caught a breakdown are usually described in the user guide. Knowing why a trimmer for grass stalls, you can try to independently eliminate the defect. The most common malfunctions provoking the motorcycle stops, and the ability to repair them with your own hands is in the material further.

In order to most accurately determine the cause of the trimmer malfunction for grass of any brand (for example, echo) and find out the possibility of eliminating it, you need to install, when performing what action the device stalls. The engine can turn off both at idle and at high speeds, heated under load or immediately after starting and t.D.

If you stalled after gas supply

Owners of gasoline braids often mention that the lawn mower stalls when you press the gas. Usually such a breakdown occurs due to problems in the carburetor. A failure in his work can occur due to long-term storage, use in difficult conditions, significant overload of the motor. The symptom of such a breakdown will be vibrating movements of the device during operation.

On a note! Users familiar with the repair of a car carburetor can try to restore this important node of the trimmer for the grass on their own, using the instructions for operating. Otherwise, the correct decision will be to seek help from the service center representatives.

Sometimes a trimmer for grass stalls when you give gas because the fuel valve is clogged. This interferes with the supply of gasoline. To eliminate the problem, it is enough to loosen the valve. Thus, normal supply of carburetor fuel will be restored.

Another possible reason why the lawn mower stalls when gas is supplied is pollution of the soundtress (check valve). This detail prevents the appearance of a vacuum in a gas tank. If it is clogged, the air does not flow, which means that fuel does not go to the carburetor. To eliminate the problem, it is necessary to clean this element.

If it stalled at high speeds

If the carburetor stalls at high speeds, this means that in idle and small there are enough incoming fuel, and to work on high is not enough. Then it is necessary to check the serviceability of the following nodes of the trimmer for the grass.

  • Fuel hose. its integrity could be violated as a result of cracking. In this case, you need to replace the part. Or maybe you just need to tighten the clamps.
  • A filter network between a carburetor and a hose for supplying a gasoline mixture-it could clog. In this situation, it is necessary to clean the detail.
  • The valve on the gas tank cover. he could stick or clog with garbage. Cleaning is also necessary.
  • Carburetor. perhaps as a result of constant vibration, it was resolved. This is usually characteristic of cheap Chinese details. To eliminate the problem, it is necessary to set up according to the instructions. In some cases, it is enough to only weaken the tightening of the carburetor case. If the adjustment is not possible, it is necessary to install a new element.
  • Additionally, check the air filter. Perhaps it will need to be washed and cleaned or replaced with a new one, as he could clog with dirt and particles of grass when tilted technology, when the user mowed in hard.to.reach places.

If you stalled during work idle

If the lawn mower stalls, working idle, there may be several factors reasons.

  • First you need to check the prepared fuel solution, when it comes to a four-stroke trimmer working on a gasoline-oil mixture. There is a chance that it is made incorrectly. the proportions are not withstanded. Because of this, the gearbox is warming up, and the revolutions on the drum are lowering.
  • Another probable cause is blockage of elements such as a throttle, air filter or carburetor. You need to clean the indicated details.
  • Another possible factor is to resolve or incorrectly carried out carburetor adjustment. You need to adjust the setting according to the instructions.
  • Observe this problem mono and when opening the air damper. In this situation, the lack of fuel for a trimmer for grass occurs through the fault of the air flow.

If the device does not have enough fuel, it works properly at high speeds or when they increase, but stalls at idle. If the root of the problem consists in the carburetor, the lawn mower will be disconnected both with cold startup and hot.

If you stalled after starting

If the technique starts and stalls immediately after starting, this indicates the wrong settings or deducting the device. As a result of this, the fuel enters the engine unevenly, which leads to significant vibration and disconnecting the trimmer for the grass. To fix the breakdown, it is necessary to reconfigure the device according to the user management.

Another probable problem is the blockage of the valve supplying the gasoline mixture. It must be cleaned.

On a note! If the trimmer for the grass starts, but immediately stalls, it may also mean that the fuel is moving to the carburetor with difficulty. Weakening the valve will help to eliminate the problem. this will provide uniform and free circulation of fuel in the device.

Another possible reason is the damaged fuel intake hose. Air can penetrate through cracks and holes into the system. To solve the problem, you need to increase the engine speed in order to get rid of air bubbles that have penetrated the device.

If you stalled when opening the damper

If the technique works properly at idle, but stalls when opening an air damper, this reports about the penetration of air into the system through cracks in the fuel supply hose or damaged oil seals. To fix the breakdown and establish the work of the tool without driving air from the atmosphere, it is necessary to replace damaged parts.

Preventive measures and operating rules

So that the lawn mower does not work and does not stall when starting, it must be correctly stored and operated. Compliance with the following simple recommendations will forget about problems.

  • When begging the grass, you need to monitor the state of the cooling system. It is also necessary to regularly clean the channels in the case and starter’s ribs.
  • To clean the tool, you should use kerosene, solvent, or other washing tools.
  • You can not clean a hot tool. it must cool before washing.
  • It is important to observe the recommended working mode. this will avoid overheating of the engine.
  • If a braid for grass is not used over the next thirty days, the fuel must be drained, otherwise it will fall into heavy components that can score the channels of the carburetor.
  • After the fuel is merged, the trimmer for the grass should work at idle for some time until it turns off. This will allow you to completely get rid of the rest inside the working mixture.

To store the tool in cold weather, you need:

  • completely drain the fuel;
  • disassemble the lawn mower, wash and clean all available components;
  • inspect the condition of the parts, eliminate all defects that can be corrected;
  • pour the required amount of oil into the gearbox;
  • Clean the air filter;
  • perform partial disassembly of the engine, wash all moving parts, blow and lubricate thoroughly;
  • To lubricate the piston, unscrew the candle, then raise the piston to the upper dead point by the starter, pour a small amount of oil into the hole for the candle and do the crankshaft several times.

Important! If there is no way to store a trimmer for grass in a warm dry room, you must first wrap the motor with an embarrassed rag.

Only by observing these rules, you can be sure that the lawn mower will work properly and will not stall for a number of seasons.

As you can see, stopping the work of a trimmer for grass can be caused by many reasons. Most of them can be fixed independently using the user instructions. In cases where there is no self.confidence, the equipment is recommended to be attributed to repairs. It is worth remembering that incorrect actions can cause even greater harm to the trimmer. As a result, the repair of Motokos will cost a much larger amount than it would be initially, and in the worst case, it may be necessary to buy a new unit.

Не заводится триммер. Не заводится мотокоса вообще. Причины и как исправить

At idle

At single speeds, the common reasons for stopping a trimmer for grass are as follows:

  • reducing the speed of the gearbox when heating it, which is a consequence of the use of inappropriate fuel mixture;
  • clogging of the throttle;
  • air entering the system;
  • not enough fuel for the operation of the lawn mower.

If a carburetor is a problem place, then the technique will stop at the “cold” and with a “hot” launch.

Immediately after you started

The unit can stall immediately after the launch, if the carburetor is cesspool or was incorrectly configured. this causes Uneven fuel supply

The result is that the device begins to vibrate clearly. To eliminate problems, the carburetor is reconfigured, acting according to the instructions for the mechanism.

The engine also stops when Clotting of the valve

, supplying fuel. In such cases, it is enough just to clean it. If the lawn mower at first earned, but then immediately stalled, then possible fuel to the carburetor unit enters some difficulty. The weakening of the valve helps to solve the issue, which provides free circulation of the mixture in the system.

The stop may also be called Air suction

In the presence of mechanical damage to the hose (holes, cracks) that fuel fuel fuel. In this case, the drive should be added to the drive to quickly drive air bubbles from the system.

Read the same from the heading

What gasoline in the Husqvarna lawn mower

Oil for the lawn mower: how to correctly change it and which liquid it is better to fill the lawn mower is a very necessary thing for those who need repeating mowing of grass on lawns and other earthen areas. But with the acquisition of this tool, one should not forget that he, like at least some other mechanism, asks for repeating maintenance. Basin gasoline Husqvarna to the lawn mower []

Huter gas mower adjustment of carburetor

Tuning the carburetor of the chainsaw of the chainsaw for an independent option of the carburetor, it is necessary to familiarize yourself with its device and understand the work order that is carried out to adjust the parts responsible for the correct functioning of the components of the device and the parts close to it. It is necessary to carefully handle objects for the option, also determine the compliance of the displayed characteristics of very acceptable values. About the device of the carburetor carburetor []

How to correct the fishing line for a trimmer to a gas station

A step.by.step annotation, how to wind a fishing line for a trimmer on a trimmer coil for grass with the advent of spring, you often spend your time in a dacha or a personal plot. From such a confusion as grass and weeds, you will be protected by a trimmer for grass. This tool without much work trims and mows grass in complex areas, where an ordinary lawn mower is not possible. Trimmer for grass. very effective and []

At high speeds

When a braid for grass stalls at high speeds, this is due to the following problems:

  • clogging or clutching a valve located on the gas tank lid;
  • The carburetor was diluted under the influence of vibrations arising during the operation of the mechanism;
  • problems with the circulation of the fuel mixture;
  • atmospheric air
  • The hose intended for fuel fuel cracked or slightly connected.

The carburetor is regulated by relying on the operational instruction to the trimmer. For configuration, it is often enough to weaken the tightening of its body. If there are problematic issues with the circulation of the fuel mixture, then it can gradually enter the carburetor. After its production, the engine stalls at high speeds.

huter, stalls

Trimmer does not start for grass

Like any technique, trimmers for grass are subject to various breakdowns. Often at the beginning of the summer season, the owners of such a tool complain that the trimmer does not start for the grass, and you have to look for a long time to look for the cause of the malfunction.

For those who have acquired a trimmer for grass recently and still on “you” with this technique, information will be useful about why the trimmer for grass is not started and what to do in this case. So, let’s find out what can cause this.

A gasoline trimmer for grass is not started. 10 possible reasons

Before trying to independently establish the work of the tool, carefully study the guide for its operation. Perhaps the information contained in it will promple you with one or another thought. Otherwise, you will have to look for the cause of the malfunction by selection. It may be one of the following:

  • The cupcan on the rod is not transferred to the “v.””. This is one of the elementary actions, but sometimes beginners forget to turn on the tool before starting it.
  • Such errors include the absence of fuel in the tank. If the fuel ends, and you forgot about it, just pour into the tank (usually located near the motor) AI-92 gasoline.
  • Absence, inappropriate mixture or incorrect proportion of engines oil. Ideally, you should regularly add no more than 50 g of oil. This will serve as an additional lubricant and will support the engine of your trimmer for grass in working condition. Also consider that oil is of different types (“synthetics”, “semi-synthetics”, “mineral water”)-all of them affect the operation of the mechanism differently.
  • If a trimmer mowel for grass does not start after winter, drain the fuel remaining in the gas tank and replace it with fresh. This is especially true for small low.power trimmers with small engines sensitive to low.quality mixture. In addition, during the winter, a precipitate may form at the bottom of the gas tank, which is due to which problems arise with the operation of the device.
  • Excessive fuel pumping can also become one of the reasons that the trimmer for the grass has not stalled and does not start. Когда воздушная заслонка перекрыта, свечу заливает топливом. It should be twisted and dried, and then inserted into your place and try to launch the engine, holding the gas trigger. It is advisable before this to check it for the presence between the electrodes of the spark. If there is no spark, the candle should be replaced.
  • Problems with the filter. If your trimmer for the grass starts poorly, remove the air filter and run the tool without it. If everything works out, the filter should be changed to a new. As an option. to carefully clean and blow the old one, but sooner or later the replacement will still have to be done.
  • trimmer for the grass stalled and does not start? Try to clean the so.called sapun. an element designed to level pressure in the gas tank. Cleaning can be done with a regular long needle. The clogged soundtrack often becomes the cause of the malfunction.
  • Knives are removed from the car. some models will not work under this condition.
  • Violation of tightness. You can check this using a pressure gauge. If the pressure begins to fall, you should determine which of the parts of the carburetor is faulty. Most often, carburetor gasket wears out.
  • Sometimes, after a long period of work, you can notice that the trimmer for the grass has overheated and does not start. Firstly, you should know that you should definitely take breaks. The amount of continuous operation time recommended for this model should be indicated in the instructions. Also, the problem of overheating can lie in a faulty ignition coil or in the air cooling system, which prevents overheating.

If none of these actions has given a result, you should contact the repair shop or service center.

The lawn mower stalls in other words suffocates when pressing the gas

If the inconsistent is associated with the carburetor node, then it can be recognized when the lawn mowing appears when the vibrations appear. When a hose bursts or a cable stretches, a change of data data is made.

When a braid for grass stalls at large speeds, this is due to the following problems:

  • clogging or clutching the valve placed on the gas tank lid;
  • The carburetor was drained under the influence of vibrations that occur during the operation of the mechanism;
  • obstacles with the circulation of fuel consistency;
  • atmospheric air
  • The hose created to fuel fuel cracked or slightly connected.
huter, stalls

The carburetor is regulated by focusing on the operational annotation to the trimmer. For the option, it is often enough to weaken the tightness of its body. If there are problematic issues with the circulation of the fuel consistency, then it can gradually enter the carburetor. After its production, the engine stalls at huge speeds.

At single speeds, all.fought trimmer stopping the grass are subsequent:

Loft crankshaft crashes oil seals, HOW TO REDUCE THE BREAKDOWN, repair the brush cutter

  • pollution, drainage in another incorrectly configured adjustment of the carburetor;
  • clogging of the air filter;
  • reducing the speed of the gearbox when heating it, which is a consequence of the use of inappropriate fuel consistency;
  • clogging of the throttle;
  • air entering the system;
  • insufficiently fuel at the work of a lawn mower.

If a carburetor is a problem place, then the technique will stop at the “cold” and with a “hot” launch.

The unit can stall immediately after starting, if the carburetor is resolved as it was also called incorrectly configured. this causes an uneven supply of fuel. The result will be that the device begins to vibrate clearly. To eliminate problems, the carburetor is reconfigured, acting by annotation to the mechanism.

Filters

Blocking air filter ─ another reason for the unreliable operation of the device. To check the involvement of this element in the malfunction, you need to start the lawn mower without it. The contaminated filter can be washed in gasoline, dried or replaced with new.

The clogged fuel filter does not let the fuel into the cylinder, and the engine with full gas stalls due to elementary lack of gasoline. This element is located inside the tank on a fence hose. To eliminate the problem, instead of the old filter, put on the new hose or rinse carefully the one that was removed.

Advice! When trying to pull out a cork in the tank, the hose along with the filter can fall into the tank. You can get them with tweezers.

When to contact the workshop

If the device is under warranty, at the first signs of incorrect operation, it can be safely attributed to a specialized workshop. Repair will be made for free, regardless of the nature of the damage, if it happened not due to the fault of the owner. In case of breakdowns in the engine, an ignorant person in technology, it is better to immediately contact a specialist. In any case, the degree of seriousness of malfunctions with the unit is determined by the user himself.

Summarize. Both gasoline and electric trimmers for grass are designed for many years of reliable work. Most of the problems described above occurs due to the insufficient attention of the owner to his assistant. Subject to strict compliance with the requirements from the manufacturer and regular maintenance, the manual mower will work rhythmically and without interruptions.

For what reason does an electric braid for STIHL grass do not develop full power

When using an electric trimmer for the grass, non.aviation problems may also occur. Here the reasons are completely different than that of fuel cos.

You can eliminate problems yourself

Eletric trimmer for grass does not develop the required power, because:

  • The voltage in the network is below the required minimum for the device more than 10%;
  • There was a failure on a smooth launch (if there is such a system);
  • there was a malfunction of the brush node;
  • The engine winding was burned;
  • rotating parts sometimes jamming.

To establish voltage, you should first check its power. If it does not meet the norms, it should be increased using a stabilizer.

The repair of the smooth start system is carried out only in the service center.

With wear of brushes, you just need to replace them. When installing new ones, it is recommended to clean all the surfaces with which they contact.

To establish voltage, you should first check the power.

When burning engine windings, you need to change the electric motor.

Jamming of parts of rotation can occur for various reasons. To eliminate them, you should review the entire drive unit.

The last problem may also arise in another unit of this company. the STIHL prisoner, and the sharpening of the disk on the scissors will be its solution.

Ways to eliminate problems

The first three reasons are quite simple to eliminate. If the matter is the mixture, it is necessary to pour old fuel from the tank, prepare a new emulsion from high.quality gasoline and engine oil (if your motor requires a mixture) and pour it into a fuel tank. If a trimmer for grass works on clean gasoline, it’s still easier.

In the second case, it is necessary to carefully release the details of the trimmer for grass from the wound grass. If the filter is clogged, you can try to rinse it

If this procedure has not brought the effect, replace it with a new

If the filter is clogged, you can try to rinse it. If this procedure has not brought the effect, replace it with a new.

The last reason why the lawn mower does not work properly will require you a little more knowledge and skills.

In order to properly adjust the carburetor of the lawn mower, it is necessary to observe a certain procedure. First of all, carefully clean the air filter. The easiest way to rinse it (it is advisable to carry out the filter with water regularly after 9-10 hours of operation).

After that, in the diagram of your trimmer for grass, which is in the instructions for the operation of the device, find the adjustment screws. Usually there are three of them: the first is responsible for the supply of fuel, the second. for idle, but the third is designed to limit the number of maximum engine speeds.

Next, you should turn on the unit and wait for the engine to warm up.

Slowly twist the first adjusting screw (fuel mixture). Catch the moment when the motor begins to stall, and turn the screw in the opposite direction 45 degrees. If you did not have time and the motor stalled, the screw should be turned 90 degrees. Open the throttle and see how the speed is going. Next, you should slowly unscrew the screw (each turn. the same 45 degrees) until the moment when, with full gas, the motor begins to firmly issue maximum revolutions.

The second screw, as mentioned above, controls the engine speed at idle. Weakening it, you reduce the number of revolutions, tighten. increase. The screw must be adjusted so as to ensure confident operation of the motor at small speeds. Accelerate the engine for better starting a little. At the same time, make sure that before the movement of the knives/coil with the fishing line, the motor makes several dozen revolutions. With poor starting the engine, screw the screw slightly.

After you have adjusted the first two screws, test the operation of the device at the maximum engine speed. If necessary, you can limit it (maximum). this will serve as protecting the motor from “boiling”. To do this, you need to do the third screw. Unscrew the fixation nut until the moment when the control screw can be calmly turned. To increase the maximum speed, the screw must be loosened to reduce. on the contrary, tighten. Fix the screw position with a nut. Test the work of the motor again.

Spend the position of the screws regularly. a high level of vibration characteristic of benzocoses can cause their involuntary shift.

Remember that carburetor adjustment is not the final procedure. During operation, Motokos, most likely, you will have to mess with it more than once, because an unbalanced carburetor is both an increased fuel consumption and a quick failure of the candles, not to mention reducing the power and productivity of the device.

Problems with ignition candles

When a benzotrimer is used often, you need to monitor the state. This part is susceptible to wear, so they need to be regularly examined: is there a Nagar on them.

You can solve the problem in two ways: clean the old candle from Gary or purchase a new one.

In the first case, you need to unscrew and swing with sandpaper, dry. The distance between the electrodes should be 1 mm. Trimmer for grass is collected and advanced.

In the absence of a spark between the electrodes, it is worth inspecting the quality of the connections of all the elements of the circuit. If in this case everything is fine, then 100% you need to change the candles.

Replacing them is easy and inexpensive. From the tools will be needed a key, supervisor.

Important! With frequent appearance of soot on the candlelights, it is worth looking for a reason a little deeper. Candles should be carefully cleaned of plaque

Candles should be carefully cleaned of plaque

At idle

At single speeds, the common reasons for stopping a trimmer for grass are as follows:

  • reducing the speed of the gearbox when heating it, which is a consequence of the use of inappropriate fuel mixture;
  • clogging of the throttle;
  • air entering the system;
  • not enough fuel for the operation of the lawn mower.

Immediately after the start

The stalling of motorcycles or a trimmer for the grass immediately is due to the following reasons:

  • impressive of previously adjusted valves;
  • Initially incorrect setting of the valve mechanism;
  • clogging with fuel supply valve;
  • the hose is worn or poorly attached.

Due to the violated algorithm of fuel injection, the lawn mower is or is vibrated in the work.

| Denial of responsibility | Contacts |RSS