Huter single axle tractor cutter assembly for power tiller

.Preparing and installing the cutters.

The cutter set for a single axle tractor is: 16, 24 or 32 cutting inserts. Which set to choose depends entirely on the type of soil on the plot and the size of the area to be cultivated. If you have a small area to cultivate, it is not recommended to use more than 16 cutting inserts. A set with 8 blades on one side and 8 on the other is considered optimal. If you decide to use sets of 24 or 32 plates for small plots, it will significantly increase the load on the engine of your power tiller, and, as a result, it will greatly tire the operator.

The stage of preparation of cutters consists in the proper assembly of the sets of cutting plates. You must be absolutely sure that the cutting part is facing the same direction.

On no account should the cutting parts of the cutter be sharpened. If you sharpen them, the roots of the weeds won’t rise to the surface of the cultivated soil. The root system will simply be cut with a sharpened mill and remain in the ground. After a while the weeds will grow again in the same place, and the cultivation will be absolutely meaningless.

It’s worth mentioning that sharpened power tillers increase the load on the engine of the power tiller quite a lot.

Also sharpening of the burrs has a negative effect on the specified depth of cultivation of the plot. If you sharpen the cutters, the single axle tractor will occasionally dig into the ground when moving forward. This happens because the sharpened tillers do not grip the ground, but cut. This causes them to dig heavily into the ground to a depth of more than 30 centimetres.

So you have finished assembling the router set. Now you can move on to the next stage of preparation of the power tiller. installation of the cutters on it. You must be careful to ensure that the direction of the cutting part of the plates is placed in the forward direction of the power tiller. It is very important not to mix up the left-hand and right-hand cutters and put them in their places.

How to assemble a tiller for a power tiller

huter, single, axle, tractor

A single-axle tractor is a popular tool on the farm today. Assembling the tiller for the power tiller is an important moment in preparing to till the ground. The most common cutters are sabre-like blades (photo ), and devices called goose-feet (photo ). These attachments are easy to assemble on your power tiller. They do most of the work on the plot. They only need to be replaced very infrequently. This significantly reduces the time spent on maintenance of the power tiller.

How to assemble power tillers for a tiller

Engine blocks and power tillers of the company Aurora, and in principle, as in many other manufacturers, are supplied with cutters in a disassembled form. Assembly is often a bit of a challenge for owners of new machines. In this article, we describe how to assemble the working cutters from the parts of this Qtyotkonstruktor Qtyot. For Aurora equipment, depending on the model, cutters are available on axes, two sizes. Diameter of the axle, for light equipment is 23 mm, and for heavy equipment is 32 mm.

Cutters for light power tillers and cultivators are easy to assemble. To do this, you must install the blades in special mounting sockets and screw them. Pay attention to the direction of the cutting edge of the blade. It must face the direction of travel of the power tiller. In addition, each blade is marked. If “quotRquot” is written, it means it is turned to the right side, respectively quotLquot to the left side.

Each subsequent section is locked to the previous one by a pin and secured by a stud. Cut-off saw blade must be secured with a bolt. Depending on the power of the equipment, the number of cutters will be different. Their number can be 24, 32 or 40.

the number of blades may also vary and could be three or four per section. This is determined by the number of fixing blades on the axle. If the cutter axis is straight, without offset to each other, the number of blades will be three. For offset models. four.

Power tiller engine piston install/how to piston install.

The four-blade cutters are assembled in sequence, one left, one right. It is easier to assemble the cutters if you first divide the left and right blades into two parts, for the left and right cutters.

Three blades are assembled differently. Fit the first blade on the axle and fix it with a bolt. Later on, this bolt has to be removed in order to fix another blade. If the first one was mounted on the outside of the plate, the remaining two must be mounted on the inside of the mounting plate. For three-blade harrows, the quotLquot and quotRquot markings are set separately for each side.

Single axle tractor Huter GMS-7.5: technical specifications

Hüter power tillers and power tillers have been available since 2011. They belong to the lightweight class of similar compact agricultural equipment, and its low-cost segment. Huter GMS-7.It is possible to call the 5 model a flagship model of the company: it is the most powerful out of all Huter power tillers and power tillers. How did this technique behave on the domestic market, we will learn from the reviews of the owners of power tillers GMS-7.5.

Basic information

Huter is a German brand, the production of which takes place in China. This helps to make the company’s products cheaper and more accessible to a wide range of customers.

Besides power tillers and cultivators, Huter also produces generators, chainsaws, gardening tools, lawn mowers, etc.

The company started to deal with scooters recently, since 2011. In Russia, however, products came a little later, also because of the inability to find replacement parts for the original parts.

A single-axle tractor is a small self-propelled machine (mini-tractor) that can perform small agricultural tasks, in particular the cultivation of large areas of land.

German device Huter for tillage is not difficult to start from the first time, for this it is necessary to

  • open the fuel tap and close the air vent;
  • turn on the ignition, put the gear lever in neutral position;
  • turn the throttle lever as little as possible;
  • pull the starter knob to resistance, return it to its original position and then pull sharply.
  • warm up the starting motor for about two minutes, gently opening the choke.
See also  How to remake the air filter on a power tiller

As for the maintenance of a power tiller, the product only requires checking the oil level, fuel, and adjusting the cutters and coulter.

As fuel use 92 gasoline, and as engine oil is recommended to use brand 10W40.

Cutter bar elements for power tillers

Cutter elements are necessary for soil cultivation. The quality of cultivation depends directly on the model of equipment and the complexity of the procedure.

The tiller comes with the power tiller. But in cases where it is necessary to increase the width and depth of cultivation, the unit must be equipped with the appropriate elements. In addition, the use of additional equipment makes it easier to move the power tiller forward, as well as increase its service life.

Specialists recommend using two pairs of rotary cultivators for cultivating clayey soil. You can change the depth by adjusting the opener, which is a sturdy construction built into the linkage of the power tiller in an upright position. The final loosening depth will directly depend on the diameter of the tiller.

To better understand the principle of operation of special equipment, to begin with it is worth to understand the main types of cutters, among which it is possible to distinguish two types of construction:

Sabre-shaped power tillers are currently the most popular choice. they are a universal design type with a high level of efficiency. This model has an optimum shape. Feet, as a rule, are made of qualitative strong steel. In addition, the material is additionally thermally hardened and subjected to high-frequency current treatment.

The so-called ‘goosefoot design’ is generally used for hard soils. This type of mechanism is indestructible. This type of products shows their effectiveness in weed control and in cultivation of virgin land. their main disadvantage is the material from which the equipment is made. Carbon steel has the most direct influence on the strength of the product, so you should work the soil with the goosefoot cutter as carefully as possible. Otherwise, the mechanism can become deformed.

Huter power tillers. Overview of model range, characteristics, attachments, usage and exploitation

Brand Huter belongs to the German company HüterElektrischeTechnik GmbH. Since 2011 the production facilities of concern in China manufacture a variety of equipment. power generators, welding and electrical equipment, garden tools, pressure washers, lawn mowers, grass trimmers, power saws and chainsaws, snowthrowers, power drills, etc.

Huter power tillers and power tillers are represented by a small range of models. within 10 modifications. Despite the insufficiently ramified dealer and service network, Huter motor blocks are gradually conquering the post-Soviet space.

The technique is made under the strict control of German experts, corresponds to the best European samples, so some marketing drawbacks successfully covered by the perfect quality of machines combined with low prices.

Types of attachments

A wide range of attachments for Huter power tillers, which are offered for sale, significantly expands the unit’s capabilities, thus helping to carry out all the hard work in the farming.

The following types of equipment are suitable for all Huter models:

  • Pump for water supply to the site;
  • The grousers make it easier for the tiller to traverse sticky ground;
  • Crop-edging head;
  • Cutters of various sizes are suitable for cultivating the soil as well as removing weeds;
  • Potato digger is designed to harvest potatoes by separating the root crop from the ground;
  • The harrow helps to make furrows which are later used for planting or irrigation;
  • The tiller is an indispensable device when it is necessary to carry out row-tillage.
  • The adapter and trailer are used to improve working comfort, as well as for transporting loads.
  • Mowers are designed for mowing grass and other crops.
  • The plough is the most popular tool after milling machines, because it helps to plow soil faster and more effectively, especially if the task is to process virgin land.
  • Snow blower, shovel blade. can be used from other manufacturers, while doing the job just as effectively. The snow blower throws snow several meters to the side, so you should take safety precautions when working with it.
  • The hitch lets you attach any attachment to the power tiller.
  • The traction lever is used on those models of power tillers with a low weight for effective sinking into the ground.

The power tiller and engine run-in

Many owners of farms, cottages and countryside plots know that without good tillage it’s almost impossible to get a good harvest. The use of the power tiller or power tiller makes such difficult and routine land works as plowing, hoeing, planting and harvesting potatoes, making hay and weeding easier. Gardening equipment will not only help to do the land work, but is quite capable of handling the tasks of territory maintenance, transportation of crops, snow removal in the winter time.

We know that any equipment, including our single-axle tractor, requires careful maintenance and careful operation. For residents of Ukraine a single axle tractor is an expensive purchase, so do not immediately start working with him at maximum capacity. This can entail not only the failure of individual nodes, but also significantly reduce the service life of the entire unit.

The first and most important process before starting your machine is running the engine and the power tillage. This will help to extend the life of the equipment, check the performance of the entire system and reduce the number of high load failures. We recommend that you carefully read the instruction manual for your model. Read in our article how to properly run-in the single-axle tractor and engine.

Cultivators and power tillers

GMC-1.8

Huter GMC-1 single axle tractor.8 designed to facilitate work in small household plots and cottages, as it is the smallest and most economical model.

Two-stroke engine has 1.25 L of power.с., Fuel tank capacity of just 0.65 l. The fuel tank is semi-transparent, allowing the owner to see the fuel level on time.

The unit helps you to easily cultivate densely planted areas, avoiding bushes and trees, because the working width is only 23 cm.

Thanks to the telescopic handle, which folds up compactly, the unit does not take up much space during storage.

Technical Data

Power Source Gasoline
Engine 2-tactic
Engine power 1,25 л.с
Working width 230 mm`
Working depth 150 mm
Cutter Diameter 220mm
Gas tank capacity 1,2 л
Speeds 1 forward
Weight 17 kg

GMC-5.5

Huter GMC-5 single axle tractor.5 is a compact model among the whole range, designed for small farms. One forward speed and reverse will help to maneuver the plot.

The model is equipped with a 5.5 liter gasoline motor.с., air-cooled gasoline engine that doesn’t overheat.

Fuel tank capacity of 3.6 L. Enables long periods of operation without refuelling. Cutter diameter is 32 cm, giving the farmer the ability to cultivate the soil to a depth of 35 cm.

Technical Data

Power source Petrol
Engine 4-stroke
Engine power 5.5 л.с
Working width 890 mm`
Tillage depth 350 mm
Cutter diameter 320 mm
Gas tank capacity 3.6 л
Speeds 1 forward/1 reverse
Weight 60 kg

GMC-6.5

Huter GMC-6 single axle tractor.5 represents the middle class at a budget price. Great for cutting small to medium sized areas of land.

The engine has 6.5 liters of power.с. allowing you to cultivate even virgin land. One forward speed and reverse provide good maneuverability.

See also  Adjusting the carburetor of the Huter bs 52 chain saw

The chain drive that the machine is equipped with is characterized by reliability and durability.

Ergonomic design down to the last detail. Wings above the tillers protect the operator from flying lumps of earth and dirt. Handle includes all necessary controls and anti-slip rubber pads. Height-adjustable steering wheel is a convenient feature that allows the operator to work in comfort.

The tiller’s own weight is the force that holds the tillers in place during advance, so the operator does not have to exert much effort.

Technical Data

Power source Petrol
Engine 4-stroke
Engine power 6.5 л.с/4.78KW
Working width 900 mm`
Cutter diameter 320 mm
Fuel tank capacity 3.6 л
Speeds 1 forward/1 backward
Weight 50 kg

GMC-7.0

Huter GMC-7/0 single axle tractor is an excellent combination of maneuverability and power, with a relatively low fuel consumption, which is used as gasoline.

The low weight greatly simplifies transporting the machine as well as operating it on the site. In addition, the adjustable handle allows you to set it to the optimum height, thereby greatly contributing to the comfort of the operator.

The design includes wide pneumatic wheels, designed to facilitate the movement of the power tiller, as well as 6 cutters, with which the width of the cultivated row reaches 83 cm.

Cultivation ability is limited to a depth of 32 cm.

With an engine capacity of 7 liters.с. and fuel tank capacity 3.6 l., This tool consumes very little fuel, making it possible to work for a long time without refuelling. Air-cooled motor.

Technical Specifications

Power Source Gasoline
Engine 4-stroke
Engine power 7 л.с
Working width 830 mm
Cutter diameter 300 mm
Gas tank capacity 3.6 л
Speeds 2 forward/1 backward
Weight 50 kg

GMC-7.5

Huter GMC-7 single axle tractor.5 is a semi-professional model designed for a variety of cultivation work on a plot with soil of varying density.

Engine output is 7.5 liters.с., Allows you to work a large area quickly and efficiently. PTO shaft allows the use of attachments.

Gasoline is used as fuel. Thanks to its 3-speed transmission, it can reach speeds of up to 10 km/h.

Reverse gear makes the tiller easy to operate, making it maneuverable.

Technical Specifications

Power Source Petrol
Engine 4-stroke
Engine power 7 л.с
Working width 1000 mm`
Turf diameter 300 mm
Gas tank capacity 3.6 л
Speeds 2 forward/1 backward
Weight 93 kg

GMC-9.0

The Huter GMC-9 single axle tractor is designed for active farmers who cultivate large areas. This model perfectly copes with the area of up to 2 hectares.

Power of the four-stroke engine is 9 liters.с. Single-axle tractor can easily carry up to 400 kg of load when using a dolly.

VST Shakti 130 DI Power Tiller Re-Assembling Video

Fuel consumption is so low that the 5-liter tank will last a long time.

Gearbox is designed for 2 front and one reverse speed.

Technical data

Power source Gasoline
Engine 4-stroke
Engine power 9 л.с
Working width 1150 mm`
Cutter diameter 300 mm
Gas tank capacity 5 л
Speeds 2 forward/1 backward
Weight 135.6 kg

Step by step instruction. Adjusting a power tiller

Plowing the land. one of the most important jobs in the fall and spring seasons. This work must be done to prepare the soil for planting or sowing a variety of crops. Performs plowing the plow for the motoblock, which is very important to adjust.

How to adjust the plough correctly to ensure that the land is ploughed correctly, evenly, accurately and quickly. You’ll find the answer to this question in our article.

Preparing your power tiller for ploughing

Ploughing begins with preparing your walking tractor. Let’s understand in detail how to do it.

The single-axle tractor needs to be unpacked before plowing. It can be transported to the site of operation without trailers and other attachments. Most often the delivery of equipment to the place of destination is carried out with the help of a car. If the area you are going to plow is close to your home, you should assemble your power tiller on a level surface in any place that is convenient for you.

Step one. Removing the transport wheels

How to Assemble Power Tiller || Modal WM1000N

So you’ve got your single-axle tractor to the area you’re going to plow. The first thing to do is to remove the transport wheels to replace them with special grousers. To make this part of the job easier you can put a stand under the trailing block. You need the grousers to grip the soil more thoroughly. They are just an essential tool for plowing, planting potatoes, carrots, beets.

The second stage in preparing your power tiller before ploughing involves replacing the wheel hubs with the wheel hubs on which you previously mounted the transport wheels. This is to increase the distance between the skimmers a bit. This solution will significantly increase the stability of the tractor while working.

You have already fitted the extended wheel hubs? Now it’s time to install the skimmers. It is very important that these elements are properly installed. This factor is checked by checking the direction of the tread pattern. A narrowing of the tread pattern means we are moving forward.

You can now remove the stand and adjust the plough. To assemble the plough, you put the hitch on the plough. This hitch and plough must be assembled in order to mount it to the single-axle tractor in the future.

At this point you should have all the equipment you need for the job ready, namely the plow, hitch and wrenches.

To adjust the desired plowing depth, match the hub hole of the hitch to the middle hole of the plow stand. These elements are then bolted together using the attachment bolt.

The attachment bolt is inserted into the top bore of the plough leg and secured with a nut. It is extremely important not to overtighten all the nuts at the attachment points of the plough and hitch, as you will still have to loosen them later during the plough adjustment phase. Now, after installing the hitch to the plow, you can go to the next step.

Step four. Mounting the plough to a single axle tractor

After completing all of the previous steps, the plow can be mounted onto the single-axle tractor. This is done as follows: the plow is aggregated on one or two pins (it depends on the model of motor-block), and then the pins are securely fixed with cotter pins.

In order to make it much more convenient for you to adjust the plow, it is recommended that you mount the single axle tractor on the stands. This could be two pieces of wood, 150mm by 150mm in cross section. This is the size that will help you adjust the optimal plowing depth, which should be in the range of 15 to 18 centimeters.

For easier adjustment, the plow should also be placed on a small elevation, such as plywood or a board. This solution will allow you to set the slope from the heel of the plow to its nose much more accurately. The angle of this tilt is adjusted with a special bolt on the hitch, which is very convenient. And it happens this way:

1) Turn the adjustment bolt clockwise to slightly raise the heel of the plough to increase the ploughing depth.

See also  In a single axle tractor gasoline with oil or not

2) Turn the adjustment bolt counterclockwise to slightly lower the plough’s heel and thereby reduce the ploughing depth.

The distance between the soil and the plough should always be three to five centimetres. Otherwise the plough will simply dig into the soil. If the angle of the plough is wrong, ploughing will not be as good as it should be. In this case, the load on the engine and the operator’s hands will be much heavier. After adjustment, tighten plough and drawbar.

To measure the distance between the gearbox and the control surface (i.e. plywood or a board), you need to use a tape measure (or other measuring tool). The normal clearance is 15 to 20 centimetres. It is important to observe this condition.

Before plowing you need to do some test plowing and check the quality of the plow adjustment. To use it:

Check the furrow depth and the blade quality.

Check the smooth running of the power tiller and the load on the operator’s hands.

If you are satisfied with all of the above points. you can start ploughing. But if something is not quite right. The plough must be readjusted.

Check ploughing in the field as follows.

Set up the single-axle tractor on the edge of the area to be cultivated.

Engage first gear and gently press down the clutch lever. It’s important to keep the tiller’s handlebar parallel to the ground to prevent the single axle tractor from sinking into the soil and being lifted out of the field. The operator when plowing does not need to press on the steering wheel and push the single axle tractor too hard, because this agricultural machine itself will perfectly cope with its work without additional efforts.

After the first furrow it is absolutely necessary to check the ploughing depth. Use a tape measure or a regular ruler. If the figure is the same as the one you had in mind, it means you can get back to work.

Proper plow adjustment. That’s the key to high-quality plowing. After work, it is imperative to clean the plow of dust and dirt, remove it from the power harvester and put it away until the next use.

Important! If you’re working in the heat of the day, make sure you pause to let the engine cool down.

Assembly of a Stenley 1030 power tiller

The single-axle tractor Stenli 1030 is one of the most popular in the range of this German manufacturer of agricultural machinery. Farmers and dacha owners appreciate its high quality, reliability, and versatility. This model is easy to operate and maintain. The ability to mount a variety of attachments and optional equipment allows the motor-block Shtenli 1030 to replace several separate mechanisms for different purposes.

Most power tillers are supplied unassembled. Therefore, new owners need to know how their assembly and first start-up is carried out. Proper organization of these activities and compliance with the manufacturer’s recommendations will avoid frequent breakdowns and extend the life of the equipment.

Agricultural machine (single axle tractor) Huter MK-9500 (MK-6700)

Single-axle tractor (agricultural machine) Huter MK-9500 (MK-6700) is used for tillage, ie loosening the soil without turning it, leveling and other operations. The unit achieves good results in homesteads, farms and outdoors, on limited land, row-spacing, in flowerbeds and around trees. The power tiller is equipped with a four-stroke internal combustion engine.

The structure of a power tiller. Engine. Huter motocultivators use gasoline internal combustion engines. Cultivator engines have automatic speed controllers to ease operator’s work. The nominal power range of our range of cultivators allows you to choose the right one for any type of work Clutch and gearbox ensure the transfer of torque from the engine to the working shaft Aggregation system is designed to mate the rotary cultivator with the attached equipment, which is installed on the working axle or frame Control system. Power. Determines mowing performance Since the operator walks behind the machine during the digging operation, all controls have to be operated by the operator’s hands only.

Technical Specifications. Power. determines the cultivator’s output. The more powerful the engine installed on the cultivator, the harder the soil and greater depth it can cultivate Speeds. allows you to select the appropriate range for better tillage, and also facilitates the removal of the unit from the ground after finishing work through the rear transmission Working width. depends on the installed blades, can reach up to 85 cm with standard blades and up to 120 cm with additional. The bigger the working width the more effective the cultivator’s work. But sometimes it is necessary to plow narrow strips of land, for which the blades have a compound device, t.е. it is possible to cultivate strips with the width of 30 and 50 cm cultivation depth depends on the engine power and the installed blades. The greater the working depth, the better and more effectively the soil will be ploughed The fuel tank capacity. determines the time of continuous operation of the cultivator without refueling.

Features of Huter cultivators. The possibility of adjusting the depth and width of cultivation Protection against low oil level. When the oil level is lower than allowed, Huter power tillers and power tillers do not start if it happens during the work It is possible to select the speed (for heavy and medium cultivators) and two working speeds “forward and backward” for the whole range of cultivators A wheel in the front of the cultivator for easy transportation or a parking support (coulter) in the back for easy storage Easy disassembly of the cultivator provides easy transportation and storage.

Technical data
Guarantee 1 year
Fuel capacity 6.0 л
Power 9.5 л.с.
Series MK
Mill diameter 32 cm
Engine type Petrol
Working width 115 cm
Rear stroke Yes
Fuel type Petrol AI-92
Barcode GTIN 04606059017707
Engine 4-stroke, single-cylinder
Speeds 2 forward / 1 backward
EAN-13 barcode 4606059017707
Features
Dimensions, cm 97 x 57 x 85
Manufacturer’s item 70/5/4
Brand Country Germany
Production country China
Package weight 130 kg
Accessories Single-axle tractor Steering handle Set of brackets and cutter blades Gear shifting tools Assembly tools Fasteners Protective fenders Fender mounting brackets Instructions
To make an order write or call us. Payment is made in the most convenient way for you. We deliver quickly in the way you select.

Also, we offer you a wide range of products from our online store.

Cutters for a power tiller: types, features, self-assembly

Equipment such as a tiller is essential for any power tiller, as it can be used to do most of the work associated with tilling the soil. Basically, the tiller comes with the machine, but in cases where you need to change the width and depth of processing, you should buy the equipment separately.

Additional cutters allow you to increase the functionality of your power tiller and simplify the work with it. Experts recommend having several pairs of tillers in your arsenal.

| Denial of responsibility | Contacts |RSS