Is it possible to cut metal. How to protect paint on ceramic tiles for many years.

possible, metal, protect, paint

Cut metal with a end

Nick. And Makita is aware that she will be a super thing. For everything simple. Releases??

How to Repair a Damaged Carrying Beam | Ask This Old House

Guron wrote: purely metal endings

There is no purely metal endings. There is a cut.Off saw for metal (or even better installation saw).

possible, metal, protect, paint

Guron wrote: only because of the lack of people on the market and puts detachment discs on the endings

There is everything or much on the market in almost any corner of the vast. I’m afraid this is more often greed and Olympic feelings. For many, it is not sporty to buy a finished tool sharpened for specific goals, everyone hunting universality.

Acrobat wrote: characteristics are comparable.

Then the cart and the Lada in the TTX also have almost no difference. Never. 12200. The maximum speed, it will already have an imbalance of circles by 115/125 mm and their rapid destruction. And the corner grinder with such rotation speeds of the unit (indigenous Chinese do not count).

Acrobat wrote: has a 3.Multiple reserve.

Acrobat wrote: there is only a disc to find with such a landing. But they are

Yeah. Suicidal motives. The campaign is national fun. These speculations from the category of installation of saw discs on an angular grinder. Delirium and mortal danger. The presence of a disk. Not always an indicator. By the way, there are saw wheels on the market with a landing for 22.23 and the inscription O, say, 12,000 revolutions for 125 circles. And the people are being conducted.

Alex_dr wrote: this saw, cuts not with an abrasive disk.

Dr.No wrote: to make clarity I propose to style linear speed

But is it possible to install a circle from corner grinders on the circular?

The question can be rephrase: is it possible to use a circular saw as an angular grinder? In principle, this is possible. If you install an abrasive or diamond disk on a disc saw, then there is no risk for a cutter in this case. However, the circular is very poorly adapted for such operation. Yes, when you need a flat drink, the saw will cope with this task better than a corner grinder, but its protection from dust is much worse than that of the latter. The dust is swallowed by the cutter and the tool. Then it will have to blow it down for a long time.

Dawn for cutting wood

In addition, the speed of rotation of the disc saw is much lower than that necessary for efficient operation of circles from corner grinder. For example, if you install a diamond abrasive disk on the circular and try to cut a ceramic granite, then it can easily burn the engine. And the circles themselves will wear out faster. After all, the saw and abrasive discs are designed for different angular speeds.

And repeat again: do not use saw wheels on a corner grinder! Better buy an inexpensive disk saw!

How the saw disk in aluminum differs from others?

Like any other round saw, an aluminum disk is a round canvas made of durable metal, with many teeth along the edge, which at a great speed alternately crash into the material, thereby sawing it off. “The similarity ends on this,” say the designers attack TM Then the differences begin “.

All these differences are associated, first of all, with the characteristics of aluminum, which make it difficult to cut it. Such specific manifestations of metal during its mechanical processing include (Read more on the website http: // ataka-ukraine.Com.Ua/):

How to paint tiles

  • The accumulation of metal shavings based on the disk during the sawing process. These waste greatly complicates the work, forcing the operator to stop to clean the tool;
  • Overheating of the saw blade due to the high friction force, and, as a result, an increase in the likelihood of melting the processed part, because the aluminum melting point is not very high;

These problems are taken into account in the manufacture of saw discs, and as a result, the latter receive the following distinctive characteristics.

  • Increased strength. Although aluminum is considered soft metal, it still exceeds the tree in strength, even the hardest breed, that is, to cut it is much more difficult. That’s why, the disk should have a higher strength for him. For this purpose, carbon is very often added to the rafting of the canvas a little more than other similar consumables.
  • Design features of the teeth. Their shape and sharpening are designed to effectively and purely saw aluminum.
  • The width of denture is much larger than the thickness of the canvas itself. Thanks to this circumstance, the circle passes at the distance from the edges of the sawed sample, and as a result, the sticking aluminum chips are timely and spontaneously discarded from the cutting canvas.
  • The alternation of the shape of the teeth, when the first has the form of a trapezoid, and the second is straight, increases the accuracy of the cut, eliminates the blows and probability of vibration, which are certainly harmful, both for the canvas and for the operator.
  • The change in the height of the teeth allows during the sawing process all the time to change the point of cutting the canvas into the processed material and thereby reduce the probability of overheating of the circle, and, therefore, the melting of the material.
  • The negative angle of sharpening of the teeth (when the effect on the processed surface is directed not at an acute, but at a blunt angle), although it reduces the speed of sawing, it allows you to increase the accuracy and cleanliness of the cut.
  • In addition, diamond crumb is often sprayed to the cutting edge, making a saw circle even more effective in aluminum work.
possible, metal, protect, paint

Aluminum saw can be designed for:

Summary. The most important differences in aluminum saw disks are high strength, reliability, quality of the saw and performance and performance.

Also further on the video, watch useful information about how to cut an aluminum profile.

Recommendations for choosing a product brand

The best ended saw in terms of safety, technological and comfort of work is the product of one of the following companies:

Most of them offer the table extension for the workpiece, however, additional supports are sometimes required to cut overall parts. These are found. For example, in the LF 1000 model. This simplifies the user’s work. At the same time, the mobile part of the makita metal saw is included in the stable bed, in which there is an area for installing a cut angle.

The best trout.Point in terms of reliability and stability are those whose bed is made of aluminum or magnesium alloy. They are durable, stable, but at the same time weigh. Example. Bosch GCM 10, popular among professionals, weighs only 15 kg.

The leader among the saw with a possible slope of the cutting edge to the workpiece is Hitachi. Когда «Bosch», «Metabo» или «Makita» в большинстве своем позволяют выставить угол реза лишь на 0, 90 или 45 градусов, японский концерн предлагает пользователю возможность поворота на 15; 22.5; 30 degrees. This option forces to add a rotary device to the design, due to which, however, the weight of the installation for cutting profiles, sheets or pipes will still not exceed 30 kg. The price increases by 15-25%.

possible, metal, protect, paint

Features of the disk

The disk on the end of the metal can have a diameter of 15 to 35.5 cm, the inner diameter is always 3 mm. The disk can be changed as necessary. Considering the diameter of the disk, you can take into account the recommendations of specialists who indicate the need to buy several elements of different diameters at once. The set will allow you to choose the most suitable option for a particular metal with the highest quality sharp. However, when choosing, it must be borne in mind that not every disk can be installed on a specific machine.

It is necessary to carefully treat the recommendations of the manufacturer of the saw, since ignoring this fact is fraught with burning out the electric motor. The type of sharpening of the disk should be negative. Also, when choosing, it is necessary to carefully examine the product for visible damage. There are no zazubin and other defects on a high.Quality disk. Its surface is smooth and the teeth are sharp.

Based on this, it is worth taking a closer look at the models with a disk having small teeth and a smooth wave. Such units saw the metal qualitatively and at the same time do not overheat the working blade of the disk. It is important to pay attention to the fact that the discs for end and circular saws are different, which should indicate the marking. Speaking about a landing place equal to the diameter of the axis on the gearbox, it should be noted: it must be selected especially carefully, correlating with the axis parameter.

Of course, you can use the transition rings, but only the correct option will contribute to high.Quality and efficient operation of the end saw. It is important to have attacked inserts on the disk itself, as well as the number of teeth. Such a product is more expensive than monolithic varieties, but it will last many times longer than other analogues. The larger the diameter will be, the more expensive the disk will be.

Is it possible to paint tiles?

Hello, Nikita. I wish to paint the tile in my own apartment. We have tiles in one room, in the kitchen and in the bathroom. The budget does not allow to change the tile yet. Is it possible to paint clay tiles, or do not do it? Please tell me the truth, this is a stupid undertaking as my husband says, or I can right away in front of him and before our friends?Daria Kuznetsova.

Hello, Daria! I say the truth: if you paint the tile, then later you will have to have a long time. From all those compliments and the praise that your friends will read for you at the sight of refreshed tiles. But the best. This is that you can reduce your own unbelieving Thomas a couple of times. Spouse in a good restaurant. After which he will definitely listen to you for more.

Recommendations for choosing a product brand

The best ended saw in terms of safety, technological and comfort of work is the product of one of the following companies:

Most of them offer the table extension for the workpiece, however, additional supports are sometimes required to cut overall parts. These are found. For example, in the LF 1000 model. This simplifies the user’s work. At the same time, the mobile part of the makita metal saw is included in the stable bed, in which there is an area for installing a cut angle.

The best trout.Point in terms of reliability and stability are those whose bed is made of aluminum or magnesium alloy. They are durable, stable, but at the same time weigh. Example. Bosch GCM 10, popular among professionals, weighs only 15 kg.

The leader among the saw with a possible slope of the cutting edge to the workpiece is Hitachi. Когда «Bosch», «Metabo» или «Makita» в большинстве своем позволяют выставить угол реза лишь на 0, 90 или 45 градусов, японский концерн предлагает пользователю возможность поворота на 15; 22.5; 30 degrees. This option forces to add a rotary device to the design, due to which, however, the weight of the installation for cutting profiles, sheets or pipes will still not exceed 30 kg. The price increases by 15-25%.

Circle replacement

When performing repairs, even at home, a periodic change of materials requires the replacement of a saw disk. It is not difficult to change it, but it is still worth knowing the correct sequence of actions for your own security.

It is necessary to start by installing a protective plastic casing (if any) to the upper position. For this, the side auxiliary bolt is unscrewed, the structure is raised, and then it is attached to the same bolt, just in a different position.

Then take a hexagon, which unscrews a clamping bolt in the center. At the same time, from the back of the saw, click the button of the locking mechanism of the shaft, which is a stop. She does not allow the shaft to move. Therefore, holding it, you can squeeze the central bolt with a hexagon. Then the bolt must be unscrewed (with hands), remove the side stop (has the form of a wide washer) and then a disk.

Installation is performed in the reverse order. The disk is put on the shaft, then a stop washer is placed, then the bolt is screwed up with your hands until it stops. To clamp the nozzle, press the button, and holding it, wind it to the limit of the central bolt with a hexagon.

How to choose the right disk for a end saw

After installing the saw disk, it can be checked for strength with a slight longing staggering. In the absence of a backlash, the installation is performed correctly, and you can proceed to the saw.

About how to sharpen a disk for a end saw, watch in the video below.

Rating of the best ended saw for home workshop

It is worth choosing from time.Tested brands:

Bosch (PCM 8)

With a power of 1.2 kW will provide a cutting depth of 60 mm, vertical angle. 120 degrees,

Elitech (series PT 1625)

With a capacity of 1.6 kW, drank. 90 mm, angles 65 and 150 degrees,

Makita (series LS 1040)

Professional tool for 1.7 kW, cut depth. 67 mm, mass 11 kg,

| Denial of responsibility | Contacts |RSS