Jigsaw jigsaw jigsaws with your own hands

How to make a device for an absolutely straight cut with a jig saw

The electronic jigsaw, due to the small width of the saw blade, is considered comfortable when sawing along curvilinear paths and is of little use for the same reason for straight cuts. If you don’t use guides, it starts to drift sideways. But having equipped the tool with an elementary device, it is realistic to avoid the above-mentioned defect. Only simple materials and some carpentry skills are needed to produce it.

Table for jigsaw with their own hands (3 devices for sawing)

Jigsaw table

To work with the jigsaw was more comfortable, and the cutting line came out more even, many craftsmen combine it with a small stand, turning this symbiosis into a convenient mini-workbench. The jigsaw is installed in the table on the underside, so that the saw is directed upwards, passing through a specially prepared hole. The start button of the tool is fixed, and the operator quietly saws the workpiece, controlling it with two hands. This attachment allows you to saw more accurately and is great for conveniently working with large amounts of material. To make an elementary table for a jigsaw with their own hands is simple enough, both for an experienced craftsman and for a beginner. For the assembly is suitable for any more or less suitable materials with which you can work. If only a saw and an electric electric screwdriver are available, make from particle board or thick plywood. Owners of grinders and welding machines, can afford to make a mini-workbench from metal sheets and tubes. Such a device can be made even from plastic, if there is a way to reliably fix the material. As an example, here is a guide for assembling a small table made of thick plywood. To assemble a simple table for an electric jigsaw with their own hands, drawings are generally not required, as the dimensions of such a product everyone chooses for themselves individually. As an illustrative example we will show a photo of a rather miniature box with indication of dimensions of all its sides. Based on these data, you can estimate and choose the optimal aspect ratio for your future product. Connecting the parts is made with conventional self-tapping screws screwed into the edges of the walls of the tabletop. If the material used has no lacquer coating, to strengthen the fixation, you can use PVA glue. Such a construction will be stronger, but it will not be possible to take it apart. Tip. Before screwing the finished surface to the base, you should in advance mark and drill a hole in it for the saw. Next, with the opposite side to attach the sole of the jigsaw, make a mark in its grooves for fixation, and then drill. Similar manipulations are more convenient to perform on a clean surface, which will only have to be screwed to the walls.As a base, you can use a workbench or other, more or less suitable piece of furniture. The author of the following video, made a table to work with a jigsaw out of an old nightstand, installing a switch and dust outlet in it.

See also  Saw a car disk evenly in half

Jigsaw fixture

  • Bracket for mounting metal structures (as on the photo)
  • Pair of bearings: 11 mm radius
  • Bar: 600x40x40
  • Square of heavy plywood or particleboard: 100100
  • Fixing corner: 2 pcs
  • Bolts, washers and nuts for table mounting and bracket mounting: 5 pcs
  • Screws with washers and nuts for fixing the bearings: 2 pcs
  • Wood glue
  • Drill with a set of wood and metal drill bits
  • Saw

Jigsaw table

  • Plywood (or similar): 260x200x10
  • Screw clamp
  • Countersunk screws: 4 pcs
  • Saws (saw or jigsaw)
  • Drill or electric screwdriver with drill set
  • Ruler
  • Sandpaper or file

Save this page to your social network. Screws, washers and nuts for mounting the bracket on the table: 5 pcs.

Jigsaw jigsaw accessory

Installing the jigsaw in the table, greatly facilitates the process of cutting thin materials, but the accuracy of the cut falls when it comes to thick bars. Due to the flexible structure of the saw blade, when it turns in a large piece of wood, the end of the saw blade bends and falls behind the central part. It is not possible to get the exact 90-degree angle in this case. At least without a special device for jigsaws that holds the saw strictly perpendicular to the surface.

  • Bracket for mounting the metal constructions (as pictured)
  • Pair of bearings: 11mm radius
  • Bar: 600x40x40
  • Square of heavy plywood or chipboard: 100×100
  • Fixing bracket: 2 pcs
  • Bolts, washers and nuts for attaching to the table and installing the bracket: 5 pcs
  • Screws with washers and nuts for fixing the bearings: 2 pcs
  • Wood glue
  • Drill with a set of wood and metal drill bits
  • Saw
See also  Sandblaster with your own hands for a weak compressor

First of all, let’s outline the main nuances in the making of the saw stop itself. You will need a suitable metal bracket, as in the photo below. You can find one at a hardware store or try your luck at the nearest construction market. If the search was not successful, this element can be replaced by any L-shaped metal plate in which you can set the edge of the saw blade.

jigsaw, jigsaws, your, hands

Measure and drill two holes for the bearing screws. Their location should be equidistant from each other, at a distance equal to the thickness of the jigsaw blade.

jigsaw, jigsaws, your, hands

Having finished with design of the stop, we proceed to assembly and installation of the lever. For this we make 2 pieces of bar of necessary length, and connect them at an angle of 90° with PVA glue and metal angle bars. We combine the obtained construction with the bearing guide and clamp it to the side wall of the table with a plate on 4 screws. This fixing technique allows you to change the height of the lever, to work with solid materials.

СТАНИНА ДЛЯ ЭЛЕКТРОЛОБЗИКА / Table jigsaws with your own hands

jigsaw, jigsaws, your, hands

At this point, the guide for assembling the jigsaw table with the jigsaw holder is considered complete. Assembled device is a neat and very compact mini workbench for easy sawing of materials of different thickness. We hope that the author’s product will be a good example for you or at least give you some ideas for assembling your own table.

| Denial of responsibility | Contacts |RSS