Kit for modifying a power tiller for a starter

Installing the electric starter on the single axle tractor Neva with their own hands. Single axle tractor starter: device, repair and maintenance recommendations

Motoblocks are not a complex design, but they do contain certain features. For example, when using this device, two starters work simultaneously: the main and additional. In addition, the role of helpers can also perform the role of spring and electric variants. The latter are considered the most popular, as they can be installed on motor blocks without problems and repair work. A distinctive feature of such starters is also that they are unpretentious, so they do not require too careful use.

In the selection process, most users usually give preference to the manual starter. It has a huge number of advantages over electric and other options. Such a device includes the following parts:

It is the manual starter is the most popular, because in the process of operation such devices often fail, so they have to be repaired, but just the manual versions are extremely easy to repair. Let’s look at what the process of restoring the starter looks like.

  • Before you start the repair, you need to find a diagram from the manufacturer to understand the specifics of the location of all parts. In addition, it will not be superfluous to understand the manual.
  • It is necessary to prepare a wrench, with which you can unscrew and remove the nuts.
  • Before you remove the starter, it is best to take some pictures. It will help restore everything in case you forget the location of certain parts.
  • Unscrew the washer, which is located in the center of the drum.
  • Find the damaged elements, and replace them.

Thus, the repair of the manual starter does not take too much time, which is why this variety and enjoys great popularity. In the process of restoring the serviceability of the starter for a motor-block, the main thing is to pay attention to any details, even the smallest.

Other types of starters can also be installed for the power tiller. Among the most popular and in demand on the market, there are several types.

  • Spring starters, which are considered the easiest to use and install. In order to start such equipment, you will just need to move the handle of the motoblock. The unit includes a semi-automatic spring, which provides the necessary acceleration of the power unit. It takes no more than two hours to replace the manual version with a mechanical one.
  • Electric, which run on a built-in rechargeable battery. It is the last part that determines the power level of the device and the duration of its autonomous operation. It should be noted that such starters can not be installed on all motor blocks. Only some models are able to work with electricity, so before choosing a starter, you should always study the peculiarities of your unit.

When selecting any starter, you should understand that in the first year of operation they are almost all the same. If the firm is bona fide, then each device will fully perform the functions assigned to it, but after a year, the situation changes. In order for the device to work as well as possible and for longer, you need to constantly take care of it, lubricate and replace the failed parts. Only then will the starter can boast high performance and durability.

Starter construction

Planning to find out how to assemble a starter on a motor block, it is necessary to become more familiar with the features of this element and its design. Motoblocks provide for the presence of two such devices at once. the main and additional, which guarantees the successful start of the engine even in low temperature conditions.

See also  How to assemble a gearbox from a Neva power tiller

Studying the device of a motor-block starter, it is advisable to allocate several important nodes at once:

The design provides that in the center of the body of the unit there is a coil with a wrapped cord. On the axis of the body of the product is a large circular spring, which is responsible for returning the product to its original position when rotated.

single-axle tractor with starter

The starter is responsible for starting the engine

The principle of operation of such an element is very simple and reliable. the user pulls the cord, and as a result the coil turns. Thanks to this element feeds the engine revolutions, which contributes to its confident start.

Types of mechanisms

Before finding out how to repair the starter with his own hands, as well as the most common faults of this unit, it is necessary to get acquainted with the varieties of the part. On sale there are various types, which differ significantly from each other in their technical characteristics and the principle of operation.

The most popular are:

  • spring devices. a classic version, characterized by the simplicity of installation and efficiency in use;
  • Electronic models. provide the presence of the battery for the successful start of the engine, the power is determined by the battery charge;
  • manual mechanism. a simple, but less effective option, which involves the use of a special handle to start the engine.

Planning to buy a manual starter for a power tiller or its other varieties, it should be noted that for most models of equipment perfectly suits the spring elements, as their energy will be enough to start the engine. advanced electronic devices require a battery charge, so they can not be used in the absence of access to electricity.

Converting a power tiller into a minitractor. an upgrade with high economy

The use of various equipment in agriculture becomes more and more justified every year. Of course, small tools are not yet available to all gardeners, due to their relatively high cost, but the demand for this product is gradually increasing.

First of all, by such units we mean various motor blocks and minitractors, widely represented in the market.

In this case, many owners of power tillers want to improve their models, achieving from them even greater performance. Then comes the idea to convert your single-axle tractor into a mini-tractor, which can be justified for several reasons at once.

The main one. it is the absolute cost savings, because buying a new mini-tractor can be quite expensive. Given the circumstances, we can safely say that the conversion of motor-block into a mini-tractor is one of the most common methods, embodied in the life of country craftsmen (eg a tractor from a VAZ with his hands).

Installation of the starter on a single-axle tractor

There are different designs of starters:

The most common is the manual starter for the power tiller, t. к. this device is very easy to put on a single-axle tractor, and its repair is not difficult to perform on your own. If such a device is used correctly, its durability is several years.

Let’s consider what elements make up the starter for the power tiller:

  • The body, which has the shape of a drum;
  • springs: large and small;
  • washers;
  • spool;
  • cord;
  • tongues;
  • mounting details.

There is a spool in the center of the reel, on which the cord is attached. A large spring is located in the body around the axis and is designed to return the spool to its original position after cranking.

The mechanism of this device is simple enough, it can be assembled with your own hands.

The work of a power tiller with a manual starter is as follows. The driver starts the mechanism by pulling the handle of the device. This starts the device and starts the motor. In order for the device to successfully transmit the initial rotation of the motor, the handle of the device must be pulled twice.

See also  How to increase the speed on a Cascade power tiller

starter work

Powerful power tillers mainly use a spring starter. but hand-held versions are also very common. Hand-operated starters are much easier to install and operate and are therefore more economical to produce. The design of this assembly is quite simple and uncomplicated:

  • body in the form of a drum;
  • coils;
  • large spring;
  • cord;
  • small spring;
  • tongues;
  • Washer;
  • fasteners.

The cord is attached to the spool, which in turn is mounted on the core of the drum. In a special section of the reel, a large ring spring is placed around the axis; after cranking, it returns to its original position. Here’s how you can briefly describe the design. All this works in the following way: the user sharply pulls the starter handle, thereby setting the mechanism to the initial rotation, which is transmitted to the engine. As soon as the moment needed to start the engine arises

, It starts immediately. It usually takes you 2-3 times to hold yourself up to handle properly, so the starter speeds up nicely.

The manual starter for the engine block is terribly inconvenient, as it requires a lot of effort to start it. In addition, this assembly often breaks down due to excessive force.

How can you rebuild it or improve it?

How to choose a starter on a single-axle tractor?

Motoblocks are not a complex design, but they do contain certain features. For example, when using this device, two starters work simultaneously: the main and auxiliary. In addition, the role of assistants can also perform the role of spring and electric variants.

The latter are considered the most popular, since they can be installed on motor blocks without any problems and carry out repair work. A distinctive feature of such starters is also that they are unpretentious, so they do not require too careful use.

What is the starter on a single-axle tractor?

The starter on a single-axle tractor allows the main motor to start properly and quickly, but it can have problems during operation. What should be done if it fails, and is it worth trying to repair it with your own hands?

The work of the starter

To start the engine of powerful power tillers, a spring starter is mainly used, but very often there are also manual variants. The manual starter is much easier to install and operate, so it is more profitable to produce. The design of this unit is quite simple and uncomplicated:

  • body in the form of a drum;
  • coil;
  • a large spring;
  • cord;
  • small spring;
  • reeds;
  • washer;
  • fixing elements.

The cord is attached to the spool, which, in turn, is mounted on the core of the drum. In a special section of the drum around the axis is a large circular spring, it returns the coil to the start position after cranking.

This is how you can briefly describe the construction. It all works as follows: the user sharply pulls the starter handle, thereby setting the mechanism to initial rotation, which is transmitted to the engine.

As soon as there is sufficient torque to start the engine, it starts working immediately. Usually you need to pull the handle 2 or 3 times to get a good acceleration of the starter.

Manual starter for power tillers is terribly inconvenient, because it requires a lot of effort to start the technique with it. In addition, this unit often breaks down because of the excessive force.

How you can repair or improve it?

Repair Tricks

Electrical schematic diagram of the starter.

Manual starter repair most often consists of adjusting the bent spring binds or replacing some parts. Sometimes it happens that it is necessary to replace the starter cord. To check what finally broke, you need to disassemble the part of the power tiller where the starter is located.

  • The first thing we arm ourselves with a diagram of our unit, which describes the attachment of all the parts, as well as a wrench for removing the nuts.
  • Disconnect the starter unit, remembering what and how it was installed before.
  • In front of you will be a drum with a washer in the center, which you need to unscrew. After the top washer has been removed, disassemble everything inside, and check the elements for damage.
See also  A mini tractor with a power tiller motor sich with his hands

The construction of the ratchet of the motor-block starter.

If the cord is torn, it is simply replaced with a new one. There are two hooks on the ends of the ring large spring. If one of the ends is missing, you need to heat the metal and bend it with a hook.

If necessary the ring spring can also be replaced.

Your own hands can be all assembled and disassembled, the main thing. look at the instructions and the scheme of the unit. Dismantling a power tiller starter is pretty much the same for all models of this farming equipment. The only difference will be the number of reeds under the washer. from 1 to 2.

Modification of design

Are there variants to improve the engine starting? You can replace the mechanical component with an electric starter, then the need to pull the handle with all its force will simply disappear. But such a modification is not available for all models of power tillers with manual start.

In addition, the electric circuit selected for installation will not fit every engine, so it is worth looking at other varieties of power tiller starter. One solution could be a mechanical spring mechanism.

Some stores sell a kit for modifying a Zubr motorblock. The old manual starter on a single-axle tractor is no longer needed, so it is simply removed. The replacement is suitable to install an analogue with a spring starting mechanism.

After installation, simply change the position of the knob and the engine will start almost immediately. Mechanical starter, thanks to the work of the spring, begins to accelerate the shaft of the engine without constant jerking movements.

The factory starter on a single-axle tractor at first starts the engine with just one movement. This smooth operation of the mechanism can last a year, but the more often it is used, the faster the breakdown will occur.

To avoid this as long as possible, it is worth checking the amount of lubricant before starting, as well as not pulling hard on the handle of the cord.

It only reduces the likelihood of failure, but does not avoid it completely.

Conclusion

This type of assembly is fairly easy to dismantle and disassemble. Over time, it loses its original characteristics and starts the engine only after 3 or 4 hard jerks. This means that it’s time to replace it.

For some domestic models of power tillers, there are special sets of modifications that allow you to install a different type of starter on the unit. They unfortunately cannot be used on Chinese and American models.

Power tiller starter repair

The starter in your power tiller is broken? Urgent, inexpensive and high-quality equipment repair? Our service center is always at your service. Our experienced, first-class specialists will easily fix the problem. You do not even have to go to our shop, they will come to your home and fix your power tiller starter. You only need to contact our operators and place an order.

The most common service associated with starter failure is the repair of your power tiller starter. We will bring your machine back to life in the shortest possible time and if necessary we will answer all your questions related to the operation of the equipment.

| Denial of responsibility | Contacts |RSS