Metal wheels for a power tiller with their own hands

Types of wheels for a power tiller. How to choose them?

Motor cultivator itself is a mechanical construction, used in homesteads to facilitate agricultural work. All machine parts need to be in good working order in order to work at 100%. The latter are divided into the following types:

When selecting wheels for your row crop cultivator, please note the following information.

  • Traction and pneumatic wheels are known for their versatility and the presence of an original pattern on the tread. They are often called “herringbone” at home. They are large (more than 20 cm wide and 40 cm in diameter). The wheels allow the tiller to move easily both on the road and over sticky ground. Impressive wheel dimensions make it possible to use the implement for ploughing wide areas. Traction wheels are also great for a snow blower or cart. The amazing durability of rubber is popular for its durability.
  • Heavy-gauge metal transport elements with tines. Steel “teeth” push the tiller forward and keep it from sinking in tough clay.
  • Rubber ones (solid rubber ones) are installed not only on cultivators, but also on small tractors. They are designed to roll over and are widely used in hard-to-reach or forested conditions.
  • Tandem wheels are made of 2 elements of the same size and shape. This design significantly increases machine power and speed. Have excellent contact with the surface and are easy to build at home. Also imply the possibility of prompt removal of the elements of the outer plan.

Wheels on a single-axle tractor with their own hands

and more gardeners-owners of power tillers make their own hands changes in the undercarriage of their units. This allows to increase the permeability of the cultivator, to adapt it for all different types of soils, to successfully expand the track and many other things that are not always possible with the factory equipment.

Neva” motor cultivator

Wheels for power tillers are of the following types:

metal, wheels, power, tiller, their, hands
  • Pneumatic, used for plowing and removing roots from the soil, as well as for transporting the cultivator. They are often installed from “Zhiguli”, “Oka” and “Moskvich” cars instead of the factory narrow ones;
  • Metal or gruntzatsepy are ideal for clay soil, as they have steel teeth, providing excellent passability in soft soil;
  • Solid rubber wheels are also installed on mini-tractors, thanks to the aggressive tread pattern have a high cross-country capability;
  • Supported. as a rule, it is a single support wheel, which takes the entire load from the engine;
  • twin wheels, which help increase flotation on difficult terrain and significantly increase speed.

Making homemade grousers

Sometimes wheels can slip (soft ground, slush after rain, ice) and your work can go to waste. For the best traction, you need to have a good grip. These are just regular grousers.

See also  Gears don't shift on the Kentavr tiller

Wheels of “Zhiguli” on the cultivator.

Of course, you can buy them in the store, but not everyone wants to spend money on something that you can easily make yourself from “trash” materials. Especially since there are only two requirements for them, and both are necessary to ensure reliable traction:

There are many variants of wheels with grousers, made their own hands. We will choose two of them. To make them, the main tools are:

To perform the first option, you will need strips of metal (about 5 mm thick) and discs from a car. Their diameter depends on the size of the cultivator blades. Many people take the rims of a VAZ car as their best option.

Homemade tillers for the cultivator.

The method of making soil hooks is very simple:

  • Cut strips with an angle grinder so that their length is about one and a half times the width of the discs;
  • They are bent in a vise at an angle so that they are inserted between the two sides of the disk;
  • distribute the strips evenly and weld in place;
  • strengthen the resulting tines on the axle.

The second variant is more complicated. For it take a sheet of thick metal, mark and cut something like a large bicycle sprocket or a ratchet from a clock. Then the parts of the resulting rays are bent and metal plates are welded to them.

Drawing with instructions for making wheels for a single axle tractor

Without a clear plan and vision of the final result and drawing it will be difficult to make wheels for cultivator with your own hands. Therefore, it is necessary to determine the drawing and then proceed to work.

Drawing of self-made wheels for a cultivator You can make twin wheels, between which will be inserted the weighting agent.

You can take a wheel from “Zhiguli” or “Moskvich” as a basis for a homemade wheel. In the end there are four of them. The rubber tires are removed from them. Several steel plates of iron up to 5 cm wide are welded to the rim, from which you can form a square. The rim of the second wheel is welded to it, and the rubber is put on the ready-made structures anew.

You will be interested in winter tires for Kia Sportage 17 radius

Homemade coupled wheels on the motor blocks can be made in any variation: fitting diameters, their weight, width, height of profile. everything depends on the needs and possibilities of the owner of the machine.

How to choose rubber for a power tiller

The right choice of rubber for power tillers is the key to its proper work. To make the right choice you need to know the width of the tire. It is indicated by the first digits in the marking and is usually measured in inches, and you also need to know the planting diameter of the rim.

Its characteristics

The main characteristics of rubber are its parameters. width, diameter, weight of the tire, the maximum weight of the load it can withstand.

See also  How to switch gears on a power tiller oka

These characteristics and the tasks set on the cultivator need to be taken into account when choosing tires.

Variety

Rubber for power tillers differs in size. On the domestic market, the following are available:

Rubber, which is installed most often on motocultivators, is presented on the domestic market in the following variants:

  • Kama-421″ tires can withstand a possible load of 160 kg, width. 15.5 cm, the weight of one tire. about 7 kg;
  • “L-360” weighs 4.6 kg, diameter 47.5 cm, can withstand a load of up to 180 kg;
  • “L-355” has similar parameters;
  • “L-365” holds up to 185 kilograms, diameter. 42.5 cm, weighs only 3.6 kg.

You will be interested in About the size of the rubber on the VAZ 2114

Wheels for a power tiller: review of types, how to make their own hands

In most cases before buying a power tiller people pay special attention to the practical characteristics of the device, not interested in the quality and features of the wheels. Such an approach can hardly be called wise, because the quality and durability of the machine depends on these details.

Since the mentioned unit is a multifunctional device, the wheels on a single-axle tractor are offered different:

In order to understand the specifics of each type, it is necessary to consider their features in more detail.

How to choose a rubber for your power tiller

The right choice of rubber for power tillers is the key to its full-fledged work. For a correct and correct choice it is necessary to know the width of the tire. It is indicated by the first digits in the marking and is usually measured in inches, and you also need to know the seating diameter of the rim.

Its characteristics are

The main characteristics of the rubber are its parameters. width, diameter, tire weight, the maximum load it can bear.

These characteristics and the tasks assigned to the cultivator need to be taken into account when choosing tires.

Eazy handy power tiller

Varieties

Rubber for power tillers differs in size. On the domestic market the following are presented:

Rubber, which is installed most often on motocultivators, is presented on the domestic market in the following variants:

  • Kama-421″ tires can support a possible load of 160 kg, width. 15.5 cm, the weight of one tire. about 7 kg;
  • “L-360” weighs 4.6 kg, diameter 47.5 cm, can withstand a load of up to 180 kg;
  • “L-355” has similar parameters;
  • “L-365” can withstand up to 185 kilograms, diameter. 42.5 cm, weighs only 3.6 kg.

You’ll be interested in all-season and summer tires for Chevrolet Niva

metal, wheels, power, tiller, their, hands

What is the purpose of installing wheels on a single axle tractor?

Models in the factory set, as a rule, are equipped with a standard wheelset. Since the main load is on it in the process of work, the running gear often fails.

In addition, the factory set does not always match the tasks assigned to the cultivator, the topography, soil type. It is difficult to buy factory-made kits, especially in rural areas. Therefore, the owners of equipment have to independently install alternative replacements, improving them and modifying their needs.

It all depends on the owner’s choice. the wheels on the motor blocks can be made independently, and buy or order ready-made factory ones.

See also  A mini tractor with a power tiller motor sich with his hands

Types of wheels for farm motor blocks

Home machinery for the treatment of a cottage site has a different set of running gear. It depends on the type of work and conditions of the minitractor’s use. Manufacturers install wheeled structures on power tillers, which vary in shape, material, weight.

Most of the factory motocultivators in the process of operation quickly wear rubber, deform the wheels, have low weight. Plowing the field, shoveling snow, mowing grass, planting and harvesting vegetables can be done with low quality.

Traction wheels

Wheel elements that perform the function of moving the working farm mechanism are called traction. Herringbone tires are standard factory fitted on this wheel type. Using a power tiller with these treads is appropriate on loose soils, for transporting goods around the site, mowing the grass.

If the result is not satisfactory, you may need to replace the wheels. Choose one of the options:

  • put homemade, heavier and wider elements;
  • To replace the rubber on the factory wheels;
  • install automobile rims with tires;
  • Place weights;
  • attach ground shoes that improve traction to the ground.

Narrow factory traction wheel designs make the use of the motocultivator uncomfortable, and the farming activities performed are of poor quality.

Pneumatic wheels for the power tiller

Wheel designs with pneumatic tires are metal discs on which rubber chambers with compressed air inside are attached. The elastic rim band absorbs shaking when traveling over bumps and transmits traction force. Work on the power tiller with pneumatic undercarriage is characterized by convenience, high speed and decent quality.

The tires on the wheel system are made from a sealed rubber tube, which is equipped with a valve and a return valve. Rubber smaller than the disc diameter is inflated with compressed air and sealed. Throughout the circumference, the width of the tire rim is equal, not less than 20 cm. Tires with a radius of at least 20 cm and a pronounced tread pattern are mounted on power tillers. Pneumatic wheels are characteristic:

Install wheel tires with a coarse tread pattern to prevent the cavities from clogging with soil, slippage, improve tractor’s passability.

Regular use of a rotary cultivator with pneumatic wheels will wear out the undercarriage after 3-4 years. When the tires have worn out, they must be replaced with new tires or fitted with new rubber.

Metal wheels

For difficult terrain and clay soils use minitrucks on metal wheel construction. Manufacturers offer different variants of models for plowing, plowing, transporting loads:

Wheel elements made of steel or cast iron alloy make the machine heavier, which ensures better work of the machine. Grit hooks provide good traction with the ground, due to which the mini-tractor moves quickly on the ground, the soil does not clog the rim, slipping is excluded due to the deep penetration of teeth into the soil.

| Denial of responsibility | Contacts |RSS