Mow the raw grass with a gas mowing gasoline. How long can you use?

Is it possible to mow wet grass using electric and gasoline lawn mowers as well as a trimmer for grass after rain to cut a lawn

The last haircut in the fall should not be done with a cold wind, otherwise the ends of the blades of grass will frostbite

Here are a few rules that must be taken into account when cutting the lawn:

  • First of all, make sure that on both sides of the drum of the mowing drum the height is the same, otherwise you risk simply spoiling the lawn;
  • Clean the site of stones, sticks, wires and other garbage, which can harm the lawn mower;
  • Automate the surface of the lawn with a broom or rake to smooth the grounds of the earth after rainworms and raise the grass towards the blades;
  • Mentally outline the direction of the haircut. neighboring stripes should turn out at a certain angle to each other;
  • The direction of the strips at each haircut is changed to perpendicular, then on the lawn it will not turn out ribbed stripes;
  • The last haircut in the fall should not be done in the cold wind, otherwise the ends of the blades of grass will frostbite, which will negatively affect the quality of the lawn next year.

If your site is characterized by the presence of many bumps, it is worth increasing the height of the haircut and pour mulch to align the surface of the lawn. During kosba, try not to put pressure on the handle of the mower and not to pull it back and forth.

During kosba, try not to put pressure on the handle of the mower and not to pull it back and forth

Dumb knives in a rotary mower can lead to such an effect (the blades of the grass are cut, not cut), damage on the lower plate of a cylindrical plate or its improper adjustment. Also, grass can also howl it if it was wet while mowing.

If narrow stripes of long and short grass appear perpendicular to the mowing movement during the haircut, this means that the knives in a cylindrical lawn mower rotate very slowly. The cause of resistance to the knives can be dew on the blades of grass (therefore, before cutting the lawn needs to be sweeping), too small or too high the height of the haircut.

A similar “washing board effect” is observed if each time the grass haircut is carried out in the same direction. The same vibrations during the haircut of the lawn are leaded as a result to the appearance of waves on the surface of the soil, therefore it is so important to change the direction of the stripes with each haircut.

As soon as the seeds of lawn grass were sown, you immediately need to wonder what tools are needed to cut the lawn. A simple bracket to make an even haircut will not work. A large number of different tools have been released for this:

Trimmer for grass

It is a bar with handles, a special coil and an engine that can be electric and gasoline. The coil has a spool on which a special fishing line is wound for a trimmer or a knife is put on.

note! The electric trimmer for the grass simply includes in the outlet, and it is ready to work. It is light, shameful, but it requires long wiring and the presence of a socket, which is not always convenient. It will be difficult to get a large site.

  • Low.powerful. Comfortable, light, but do not cope with hard, wet grass and weeds.
  • Powerful. Are with the lower location of the motor and with the upper. You can install a special knife, which allows you to mow more rough grass. Models with the lower location of the motor cannot be mowed wet grass.
  • Batteries. light, mobile. The disadvantages include the fact that the battery is enough for an hour.

A trimmer for grass with a gasoline engine is heavier than an electric coser, but it differs from it with mobility. He has a forged shaft, there are shoulder belts and a powerful power drive. The device of the gearbox allows you to use not only a fishing line for a trimmer in operation, but also a knife and a toothed disk, which greatly improves the quality of the site processing. With the help of a benzo.cocus, you can mow very impressive areas.

A trimmer can be baked grass in hard.to.reach places (under benches, near the pillars), as well as to bite the paths, despite their location.

Lawn mower

It is clear why this unit is called that is a technique for mowing grass on the lawn. It looks like a trolley on wheels with special knives and a device for collecting mowed grass. Lawn braids come in different models:

As in the case of trimmers, gasoline lawnmands are mobile, they can work far from the house. But they have great weight, more complex use, and besides, they make a lot of noise.

Lawn mowers with an electric motor are light, do not emit much noise, clean well, absolutely harmless to the environment. The disadvantages include the need for a nearby power grid.

INGCO Gasoline lawn mower GLM141181

The batteries are good for everyone: there is a little noise, the lawn is even, it’s easy to work, only the batteries are enough for a certain time.

Spindle is such mowers where there is no engine. The device is designed as if the lawn is cut with scissors. It turns out very beautiful and accurately, but the process is very laborious.

Lawn scissors

This tool is used where it is impossible to work either a lawn mower or a trimmer.

How to care for a lawn?

The first haircut of the lawn should not be postponed due to the fact that germinating grasses look still very weak-it’s scary to trample. In fact, trampling and rolling the lawn will only benefit him, the grass will begin to bother more from this, creating a dense turf. Yes, and you will step on the already mowed grass, moving the lawn mower in front of you, so that this will not cause any harm to the young lawn.

Let’s figure out when to start cutting the first seedlings, with what frequency to carry out a haircut during the season, and when to mow the lawn last time? Also from the article you will learn how to mow correctly in order to avoid the common problems that beginners often have to face.

How to understand that the time has come for the first time to cut the lawn? Typically, the first haircut of the lawn falls in the mid.May. See how the blades of the blades have grown: if they stretched to 10 cm, then there is nowhere to put it off. Try to choose dry weather so that the grass is not wet (there will be clogged the lawn mower), but the earth should remain a little wet.

Before mowing the grass for the first time, make sure the ideal sharpness of the mowing knives so that the weak grasses do not be pulled out of the ground with a lawn mower. You will need to cut only the very tops of the plants, so install the knives immediately to the maximum height.

Before mowing the grass for the first time, make sure the ideal severity of the mowing knives

Subsequently, the mowing of the grass should be carried out at least once a week in warm wet weather, and in cold or in dry days it will be enough to cut the lawn every two weeks. Focus, first of all, to the height of the grass: the lawn looks neat at a height of five centimeters, if the grass has grown centimeters two higher, then it is time to download it.

The last haircut of the lawn should be carried out before frosts, excessively high or low grass is poorly overwhelmed. See according to the circumstances. perhaps the last time you mow the grass in mid.September, and in the case of warm autumn, a second haircut may be needed in October.

How to professionally mow a lawn. A well.groomed lawn decorates any house. A simple and cheap way to maintain the lawn is beautiful and healthy is to use the lawn mower. In addition to maintaining your lawn in good condition, the lawn mower must also be maintained in good technical condition so that it is effective when cutting the lawn.

Procedure

Make sure that the required haircut height is installed on the lawn mower. Different types of grass require different mowing heights. Determine the type of grass on your lawn before installing the height of the haircut on the lawn mower.

Hold the lawn mower in good technical condition. Even if you do not use the lawn mower, it is important to keep it working throughout the year. Just like in the car, you should be sure that all the nodes of your lawn mower work correctly, before the start of the lawn cutting. If the lanes of the lawn mower are not sharpened, this can damage you the lawn, leaving part of the grass not beveled and susceptible to diseases. Rule of grass mow.

Try to mow the lawn when the street is not too hot. It is better to mow when there is morning dew on the grass. High temperature can be very dangerous and this should always be taken into account.

Check if there is garbage on the lawn. Before mowing the lawn, it is important to check if the garbage is in the grass, any garbage can damage the lawn mower. You need to make two passes along the edge of the lawn. Do not forget to block the passages.

We must try to mow the same site every time in the opposite direction. If this is not done, the lawn can be very worn out or damaged in some places.

Get a trimmer around the grass around flower beds, trees and in all places where the lawn mower did not reach, to the same one with a lawn mower (a trimmer for grass can also be called a benzoca, a motorcycle, a bush or an electric shock). The grass mow. During the mowing trimmer, you must be careful not to damage the bark of trees and not cling to the ground with a trimmer.

How to Mix Oil and Gas: The 2-Cycle Engine Fuel Recipe

It is necessary to alternate the direction of the mowing along and across, up and down, in different crossings of the lawn. But we must remember that you can mow a lawn mower only pushing it forward and in no case can you pull the lawn mower over yourself. It can be unsafe.

Try to maintain constant turns and the speed of the lawn mower using a throttle. This will provide a more even haircut, extend the engine service life and reduce fuel consumption.

After you will get the grass inaccessible to the lawmaker in the trimmer, you need to put on a trimmer for the grass a “edge” nozzle and cut all the edges of flower beds and paths, and you need to remove grass growing from cracks in the paths.

Do not exceed the speed working as a lawn mower. With a high speed of pushing the lawn mower, you can not have time to react and fly on a stump, wire or stone in the grass.

Check that the height of the grass mowing on the lawn mower is installed recommended for the type of grass on your lawn.

You can only mow the lawn when it dries. If your lawn is wet after rain or watering, then the lawn mower can be clogged with wet grass or soil. In addition, the movement of the lawn mower on wet lawn can lead to soil compaction and lawn diseases. This can ruin the entire lawn.

Warning

When a trimmer is spent, you always need to put on protective glasses, since stones, glass, nails and other garbage can fly out from under a working knife.

In case of any malfunction of the lawn mowing knife, first of all, it must be drowned out and a cap is removed from the candle, and then the malfunction is already eliminated.

Regular haircut of grass

The haircut of an adult lawn is usually carried out once or twice a week, depending on the intensity of grass growth under various weather conditions. Regular and correct haircut strengthens the grass, makes it more magnificent and does not allow weeds to prosper. There are norms that establish the height of the grass on the basis of their biological characteristics. The height of mowing of thin.leaved grasses of the lawn is not lower than 3 cm, for broad.leaved 5 cm.

grass, mowing, gasoline, long

The most common tools for cutting the lawn: lawn mower, trimmer for grass, battery scissors for grass.

Need to mow in dry cloud weather. The rule “Spit for grass, while the dew” with modern lawn mowers can play a bad joke. The fact is that wet grass sticks together, sticks to plastic, which leads to a blockage and does not allow the grass to freely get into the grass collector. However, the spinning of grass with the scorching sun also negatively affects the green coating, the grass turns yellow, the tips dry out. In sunny weather, the best time to cut the lawn is evening. With prolonged drought, do not cut the lawn too briefly, try to maintain a height of the grass of about 5 cm. Such a mowing height will protect the soil from drought, and the lawn will look well.groomed.

The correct haircut of the lawn

A few useful tips on how to mow grass correctly:

  • Make sure that the same height is exhibited from all sides of the mowing;
  • Before cutting, remove everything superfluous from the lawn. It can be branches, apples that have fallen from trees and other objects;
  • If the day before it was rain, or the grass settled from strong dew, comb it and let it dry;
  • Fans of striped lawns should know that the stripes appear when changing the direction of the haircut, or from changing the speed of the mowing, if we are talking about a mowing of a cylindrical type;
  • For homogeneous mowing, you need to move in a spiral, starting with a large radius. First mow the perimeter, then the spiral begins to converge to the center;
  • Never run into the wire with a mowing;
  • Hearing the strange sound of the mowing job, stop working immediately, and make sure that solid objects did not get into the mower;
  • If during a haircut with a rotary mowing the grass remains on the lawn and does not get into the grass collector. This can happen for two reasons: wet grass is lost in someone and clogs access to the grass collector or the grass collector is crowded;
  • Bugs and bumps inevitably occur on each lawn. In order not to leave proplesh on them after a haircut, you can just raise a mowing a little by the handle;
  • The torn edges of the herbal is a reminder that it is time to sharpen the knives of the mowing;
  • The appearance of the lawn will be better if you alternate the direction of the haircut. For example, today they mowed the lawn clock, and the next time counterclockwise.

It is impossible to cut the lawn evenly to cut a regular oblique for grass, so the gas mower is the main tool for even mowing. Lawn mowers are different: self.propelled, with steering control, with a handle for control. The principle of operation of the lawn mowers is also different: cylindrical, rotary, riders, robots-mosquillers, aircraft pillow lawn mowers, a hand lawn mower (a trimmer for grass). Not only the principles of work are different, but also methods of power supply: electricity, batteries, gasoline.

Basic rules for cutting the lawn

Owners of neglected lawns are interested in whether to mow high grass with a lawn mower correctly. Judging by the reviews, a high.quality gasoline wheel unit with a spacious bunker for collecting beveled greens can cope with such a task in several visits. But the work is unpleasant: heavy noise and harmful emissions.

The trimmer mow the lawn in a neglected state significantly faster, but after the completion of this work, you need to collect mowed greens with a rake.

Hence the conclusion: owners of lawn mowers should not allow high growth of grass.

The question is also often raised whether it is possible to mow wet grass with a gasoline lawn. The rules say: it is not recommended to work with a lawn mower in the rain or after watering, since such mowing is not distinguished by quality, and there is a risk of receiving ugly stripes

In addition, there are other rules that must be observed when cutting the lawn.

  • Sultry summer day is not the best time to mow grass. Fresh sections quickly dry out, and their yellowness spoils the appearance of the lawn.
  • It is recommended to cut the lawn cut in the morning or evening in dry weather, a day after rain or watering, when the soil and grass dry out.
  • It is necessary to ensure that the lamp of the lawn mower is sharpened. Work with stupid knives is fraught with troubles in the form of foliage jamming and tearing grass with the root.
  • Before the start of mowing, it is necessary to collect fallen foliage, branches of trees and other garbage, to level the earthen mounds that formed as a result of the vital activity of rainworms, ants and other insects.
  • You should decide on the direction of the haircut so that it is at an angle to the previous. Otherwise, the appearance of the lawn will be associated with the washing board.

The lawn mowers that work on electricity are unsafe

We all know that during a thunderstorm you should not swim in the river, pond or at sea. But why then use an electric lawn mower on a wet lawn? After all, in this case, you also risk getting a discharge by current. When you cut wet grass with an electric shin, there is a risk of damage to the mowing due to moisture exposure. It can also potentially lead to the wound of a person working with a lawn mower.

This can really damage your lawn

If you decide to mow wet grass on your site, you should know that you can ruin not only the appearance of the lawn. Grass is not the only wet part of your lawn. Together with the grass is wet and soil. During the use of the lawn mower, you can damage the soil and roots of the grass. As a result, your lawn can become uneven and covered with ugly spots throughout the territory.

So, taking into account some danger and possible damage that you can cause to your lawn in the country, it will reasonably hold the lawn mower away from the grass when it is moist.

The main equipment malfunctions

Any technique breaks at the most inopportune time, and equipment for the law of lawn is no exception. The following breakdowns most often occur in benzocosyles:

  • The engine is faulty. It is necessary to check the fuel in the tank, the performance of the spark plugs, the cleanliness of the filters.
  • Clothing carburetor. It is necessary to check the gasket between the carburetor and the engine, blow the fuel hose.
  • Falfly muffler. Clean the anti.icper grid.
  • Reducer damage. Check gears and bearings.
  • Output. Check the tension of the cord.
  • Air filter problems. If a braid for herb without a filter starts up, then you need to change it to a new.

Important! If you carefully monitor the benzocosa, conduct preventive examinations and replace its components, then the tool will last a very long time without any repair.

The ethletric trimmer for the grass is simpler than his gasoline relative, therefore, he has fewer problems, but still he has:

  • malfunctioning electric cable;
  • Electricobelack is faulty;
  • the fork was damaged;
  • There was a problem with the control handle;
  • The engine stator burned out;
  • Contact connection breaks occurred.

To detect the above problems, you can use the indicator screwdriver and multimeter, and you need a soldering iron to eliminate the breakdown in most cases.

If you follow the safety regulations, including under any circumstances, do not mow the raw grass with electricity devices and refrain from cutting a wet lawn with a gasoline mowing so as not to harm plants, then the tools will last a long time.

Basic rules for cutting the lawn

Owners of neglected lawns are interested in whether to mow high grass with a lawn mower correctly. Judging by the reviews, a high.quality gasoline wheel unit with a spacious bunker for collecting beveled greens can cope with such a task in several visits. But the work is unpleasant: heavy noise and harmful emissions.

The trimmer mow the lawn in a neglected state significantly faster, but after the completion of this work, you need to collect mowed greens with a rake.

Hence the conclusion: owners of lawn mowers should not allow high growth of grass.

The question is also often raised whether it is possible to mow wet grass with a gasoline lawn. The rules say: it is not recommended to work with a lawn mower in the rain or after watering, since such mowing is not distinguished by quality, and there is a risk of receiving ugly stripes

In addition, there are other rules that must be observed when cutting the lawn.

  • Sultry summer day is not the best time to mow grass. Fresh sections quickly dry out, and their yellowness spoils the appearance of the lawn.
  • It is recommended to cut the lawn cut in the morning or evening in dry weather, a day after rain or watering, when the soil and grass dry out.
  • It is necessary to ensure that the lamp of the lawn mower is sharpened. Work with stupid knives is fraught with troubles in the form of foliage jamming and tearing grass with the root.
  • Before the start of mowing, it is necessary to collect fallen foliage, branches of trees and other garbage, to level the earthen mounds that formed as a result of the vital activity of rainworms, ants and other insects.
  • You should decide on the direction of the haircut so that it is at an angle to the previous. Otherwise, the appearance of the lawn will be associated with the washing board.

Hanging height adjustment on the lawn mower

The lawn mower constructively involves adjusting the height of the cut of grass. The range of different models may vary. Technology manufacturers indicate the minimum and maximum value of this parameter in the accompanying documentation. Inexpensive models of interchangeable positions of height are most often 3, more expensive and advanced can have 5-7 provisions of the regulator.

To care for tuberous lawns, a model with a wider range of height adjustment is usually chosen.

Different models may vary a technical solution for choosing a cut height. There are two types of regulation: manual and mechanical. The first involves stopping the engine and actions to change the position of the regulator manually. The mechanical method allows you to change the height of the mowing by pressing the button on the control lever, while interrupting the process is not required.

Why not mow a trimmer Wet grass

There are indirect prerequisites for why it is impossible mow Washing from dew in rainbringing grass in a personal plot. These include:

The most of the system of the motokos is the mowing of moisturized vegetation? The answer is simple. It is displayed due to a short circuit when water enters the power compartment. In addition, even if our client remains remarkably in a sealed manner, there is a great opportunity that the engine will not withstand a large load created on a flexible shaft of a trimmer for grass. And the shaft itself can crank. In most cases, such loads appear from the sticking of wet grass to knives on the spindle, where they are attached.

Trimmers with a gasoline engine, mowing grass in wet weather, due to huge loads, increases the degree of wear of the main nodes and assemblies. Here we note the early breakdown of the piston pair, well, and additionally other movable nodes. In most cases, a piston steam blocks due to overheating of the motor. In our case, the motor will overshadow the load created by a wet grass during mowing.

If you mow damp grass with a gasoline trimmer, let the motor overheat the engine for a 30 second at idle without load. With this method you will take excessive heat and save the piston pair.

Why do not download wet grass with a trimmer

There are also indirect reasons why it is impossible to mow grass wet from dew or rain in the garden. These include:

How can you turn off the shieldcorse, cutting out wet vegetation? Everything is very simple. It is displayed as a result of a short circuit when water enters the compartment for power. In addition, even if everyone is very well sealed, there is a good chance that the engine will not be able to cope with the large load set to the trimmer shaft flexible. And the shaft itself can turn out. Such loads most often occur when gluing the grass on knives and on the spindle to which they are attached.

For trimmers with a gasoline engine, grass in raw weather through heavy loads increases the degree of wear of the main components and nodes. Here you can note the premature failure of the piston pair, as well as other mobile details. Most often the piston fails due to overheating of the engine. In our case, the motor will overheat due to the load created by wet grass during skew.

If you mowed wet grass with a gasoline trimmer, let the engine idle for thirty seconds without load to avoid overheating of the engine. Thus you will take excess heat and save a couple of pistons.

Trimmer for grass

This is a bar with handles, a special coil and a motor that can be an electric or gasoline. The coil is a spool on which a special fishing line is wound for a trimmer or put on something.

grass, mowing, gasoline, long

Note! The electric trimmer for the grass simply connects and is ready to work. It is light, comfortable, but it requires long wiring and outlet, which is not always convenient. It will be difficult to mow a large territory.

  • Low power. Comfortable, light, but does not cope with hard wet grass and weeds.
  • Powerful. They are supplied with the lower engine and the upper. For trimming rough grass, you can install a special blade. Models with a lower engine do not cut wet grass.
  • Battery. Light, mobile. The disadvantages include the fact that the battery is enough for an hour.

Read electric trimmer for grass for grass how to change a fishing line for a trimmer

A trimmer for grass with a gasoline engine is heavier than an electric mower, but differs from it with mobility. He is a forged shaft, belts and powerful drive. The device of the gearbox allows you to use not only a fishing line for a trimmer in operation, but also a knife and a tooth disk, which significantly improves the quality of the site processing. With the help of a gasoline mowing, you can mow very impressive areas.

With the help of a trimmer for grass, you can mow grass in hard.to.reach places (under benches, at posts), as well as mow paths regardless of their location.

The main equipment malfunctions

Any equipment fails at the most inopportune time, and the equipment for the law of the lawn is no exception. Such gas mowers are most often found:

  • Faulty engine. It is necessary to check the fuel in the tank, the performance of the spark plugs, the cleanliness of the filters.
  • The carburetor clogged. You need to check the gasket between the carburetor and the engine, blow the fuel hose.
  • The muffler is faulty. Clean the anti.icter grid.
  • Gearbox damage. Check the gears and bearings.
  • Starter failure. Check the cord tension.
  • Air filter problems. If a braid for grass begins without a filter, then you need to change it to a new.

Important! If you carefully monitor the brush, conduct preventive examinations and replace its components, then the tool will last a very long time without repair.

grass, mowing, gasoline, long

An electric trimmer for grass is simpler than his gasoline relative, so he has fewer problems, but still there:

  • Faulty electric cable;
  • An electric socket is faulty;
  • The plug is damaged;
  • There is a problem with a control stick;
  • The engine stator burned out;
  • Contact connection rupture occurred.

To identify the above problems, you can use an indicator screwdriver and multimeter, and in most cases you need a soldering iron to correct the breakdown.

If you adhere to safety rules, including in any case, do not mow wet grass with devices, eat from electricity, and refrain from mowing the wet lawn with a gasoline mowing so as not to harm plants, then the tool is enough for a long time.

Lawn scissors

This tool is used where it is impossible to work with a lawn mower or a trimmer.

Is it possible to mow grass in the rain

Gardeners are very often incomprehensible whether it is possible to mow wet grass with an electric lawnical mower. Unlike manual braids for grass, mowing raw grass is not worth it with a gasoline lawn mower, and you can’t even electric. When working, at least an electrimmer, at least a similar lawn mower, moisture can get into an electric drive or wires, you get a short circuit, and at best the tool will burn, and the operator will also suffer at the worst.

Do not work after a rain and equipment with a gasoline drive. The grass becomes heavier, which leads to the premature failure of the tool. First of all, due to overheating, the piston steam and other moving nodes will break.

Important! If you cannot postpone the work, then it is necessary to take breaks every 10-15 minutes and let the tool work at idle.

The lawn itself can also suffer. The soil will be wet, the furrows will turn out and the grass will be mowed with ugly stripes. Young plants can be pulled out with the roots, and in older grass the cut will be uneven, torn, which can lead to various diseases. It will also be uneven to scatter grass after a trimmer for grass, which can lead to bald patches on a flat surface of the lawn. It turns out that raw grass can be mowed with a gasoline mowing, but it is better to choose another time for mowing.

The main equipment malfunctions

Any technique breaks at the most inopportune time, and equipment for the law of lawn is no exception. The following breakdowns most often occur in benzocosyles:

  • The engine is faulty. It is necessary to check the fuel in the tank, the performance of the spark plugs, the cleanliness of the filters.
  • Clothing carburetor. It is necessary to check the gasket between the carburetor and the engine, blow the fuel hose.
  • Falfly muffler. Clean the anti.icper grid.
  • Reducer damage. Check gears and bearings.
  • Output. Check the tension of the cord.
  • Air filter problems. If a braid for herb without a filter starts up, then you need to change it to a new.

Important! If you carefully monitor the benzocosa, conduct preventive examinations and replace its components, then the tool will last a very long time without any repair.

The ethletric trimmer for the grass is simpler than his gasoline relative, therefore, he has fewer problems, but still he has:

  • malfunctioning electric cable;
  • Electricobelack is faulty;
  • the fork was damaged;
  • There was a problem with the control handle;
  • The engine stator burned out;
  • Contact connection breaks occurred.

To detect the above problems, you can use the indicator screwdriver and multimeter, and you need a soldering iron to eliminate the breakdown in most cases.

If you follow the safety regulations, including under any circumstances, do not mow the raw grass with electricity devices and refrain from cutting a wet lawn with a gasoline mowing so as not to harm plants, then the tools will last a long time.

| Denial of responsibility | Contacts |RSS