Why does the chainsaw quit when idling?

Why the chainsaw stops when you press the gas Although the chainsaw is a very simple machine, it does occasionally have problems that can only be corrected by disassembly and reassembly. Examples of faults are as follows: The chainsaw won’t pick up speed; The chainsaw stops functioning while cutting; Chainsaw starts and stops; The chainsaw…

Read More

How to cut a log into boards with a chainsaw

Sawing and sawing wood Some people have the opportunity to take a certain area in the forest for logging, to dissolve the trunks, but how can a chainsaw dissolve a log into boards, if with this never had to deal? Those who have been engaged in logging for a long time, can do it without…

Read More

How to lubricate the sprocket on a chainsaw bar

How to grease a chainsaw bar sprocket? STIHL multipurpose grease can be used. If you don’t want to overpay, it’s better to use a cheaper, but higher-quality version, Lithol grease, otherwise known as Lithol 24. We recommend you use special lubricants for lubrication. The sprocket bearing is not engaged all the time, but only at…

Read More

What is the angle of the chain on a chainsaw?

How to sharpen chain on the chain sharpening machine? Every gardener wants his or her tools to always be in working order and to do their job properly. This is especially true for those tools that should cut or saw smoothly and quickly. This is about the chainsaw and how to get it back in…

Read More

How to make a nozzle on a chainsaw angle grinder

Makeshift brush cutter attachment for chain saw Simple bush cutter attachment for chainsaw: photo and description of making a homemade. This device will greatly facilitate the process of cutting down various shrubs and bushes on the garden plot. Remove such overgrowth with a manual hacksaw is tedious and unproductive, chopping with an axe is not…

Read More

How to choose a bar and a chain for a chainsaw

CHAINSAW CHAIN AND GUIDE BAR SIZE CHART When choosing a chain for a chainsaw, you should pay special attention to its quality. Not only the frequency of sharpening that will be required after the job, but also how long the tool itself will last depends on it. The fact is that because of a poor-quality…

Read More

What oil to put in gasoline for a chainsaw

The right oil to gasoline ratio for a chainsaw Hi there! This article will talk about the correct oil to gasoline ratio for a chainsaw. This is probably the most important thing to know when using this machine. Lack of oil will lead to excessive friction and too much oil will lead to excessive fouling…

Read More

How to cut a tree quickly without a chainsaw

How to work with a hand saw The saw has to be steered, otherwise it will start to “wander”. This should be taken literally. Wood is a living material, and its behavior is unpredictable. Hard annual rings, knots, cracks, high humidity and high resin can seriously complicate sawing. For this reason there is no universal…

Read More

How to Disassemble the Oil Pump on a Chainsaw

Design and principle of chain saw oil pump Not many sawyers know how to remove the clutch on the chainsaw. The design of mechanisms on different models of chainsaws differs, but the principle of operation is the same everywhere. The disassembly procedure is also almost identical, so next we’ll look at how to unscrew the…

Read More

Which chainsaw is better than STIHL or Husqvarna?

Husqvarna 2021 Best Chainsaws Rating The best all-purpose saw in the ranking Husqvarna 455 Rancher is one of their best-selling models and probably the best known. It runs on a 3.5L engine.с. With a 20-inch long bar and a top speed of 9,000 rpm, making it the perfect professional-grade saw, but it’s also suitable for…

Read More
| Denial of responsibility | Contacts |RSS