Alteration of the circular saw in the end. Recommendations for the choice of ending saw for metal

Do.it.yourself end from a disk saw On the basis of the management, circular saw Pile saw, which perfectly showed itself in the carvings of the series. The design of such a machine transformer is very simple. The cover is connected to one of its ropes. It rises freely, which facilitates access to the tool during…

Read More

What are the best cordless circular saws. Greenworks G40CS30 2.0Ah x1

of the best cordless circular saws Review of the best according to the editorial staff of expertology.ru. Selection Criteria. This material is subjective, not an advertisement and does not serve as a buying guide. You should consult with an expert before buying. Circular saws with cordless power supply allow you to cut planks, beams, plywood…

Read More

What motor to put on the circular saw.

What power a motor for a slicer needs A three-phase motor produces less than half the rated power. That is, a 3 kW motor will give 1-1.5 kW. I think 3 kilowatts isn’t enough. A 380-volt motor would be fine, but a 220-volt one would be better with a bigger one. Yes, for a fifty…

Read More

How to choose the right circular saw. Disk saw device

Battery circular saw. Mobile tool for home During the construction or repair, a circular saw may be needed. It is worth paying attention to the battery models. They are mobile and practical to use. Using this tool, you can prepare various boards, drywall sheets, timber or laminate for finishing. The main differences in the battery…

Read More

How to sharpen a circular saw correctly. Types of wiring the teeth of the circular saw

How to properly sharpen a circular saw disc and at what angle Saw discs differ in the number of teeth and configuration. There are blades: Monolithic or whole; With hard spraying in the working area; With attacked carbide plates; Without teeth, such as continuous rim; With wide and thin ledges; With negative and positive front…

Read More

How to attach the circular to the table. Making ending from the circular with your own hands

How to attach a circular saw to the table Take a sheet of plywood, mark the size of the countertop. The electric jigsaw is neatly cut, then the edges are treated with milling. The workpiece is emphasized by medium and fine sandpaper. On the lower plane, place the place for the circular saw: remove the…

Read More

How to make a carriage for circular. Marking the corners of the carriage

Homemade carriage for circular To just cut the tree on kindling or make longitudinal profiles for lining or construction in a home workshop. One stationary “circular” will be quite enough for the master. If he needs to make a number of more serious carpentry manipulations and make a more accurate cut, straight or with corners.…

Read More

Sidewinder from a hand held circular saw

How to make a crosscut saw from a hand–held circular saw with your own hands? The design of the trimmer is similar to a circular saw mounted above the work table. Its main advantages: compactness and low weight. Due to this, saws are used not only in workshops, but also on construction sites. Unfortunately, the…

Read More

How to make a circular saw from a coping saw

Circular saw for wood with their own hands A crosscut saw made by own hands often is not inferior to the factory one. Manufacturing with drawings of such a unit you can see below. The device of such saws is similar to circular saws. Their advantages. limited weight and dimensions. They are therefore not only…

Read More

How the guard works on the circular saw

How the guards on the circular saw works These circular saw safety instructions are available for free review and download. 1.1. To perform work on the circular saw it is admitted the worker not younger than 18 years, passed medical examination and not having contraindications on health condition, having necessary theoretical and practical preparation, passed…

Read More
| Denial of responsibility | Contacts |RSS