Shtrob cutting in concrete Cable laying. Tools for stroke walls

How to stroke the walls for wiring One and common methods of installation of electrical wiring are hidden. This is when the wires and cables fit the grooves made in the wall. The process of making grooves is called a troop, and the grooves are “grooves” or “hrab”. How to do the stroke of the…

Read More

How to saw aerated concrete block manually. The manufacturers

What to cut aerated concrete. 4 types of tools for cutting When sawing aerated concrete blocks, various equipment is used: However, it is better to cut aerated concrete slabs with a special tool, then the trimmed edges will be smooth and even. Used in the form of special cutting tools: Hand saw A metal angle…

Read More

How to break through a concrete wall with a perforator. Drilling without dust

Drilling holes in the walls When landscaping the apartment, there is a need to attach all kinds of items on the walls and ceiling. Photographs, paintings, lamps, mirrors, curtains, shelves, TV, skirting boards and much more. In order to hang a photo or a small picture, of course, you should not drill the wall. It…

Read More

How can aerated concrete blocks be sawed. How to saw with a hacksaw

Features of machines for cutting gas block Aerated concrete, being modern and technological material with its own set of physicochemical properties, requires high accuracy in laying and cutting. For this, a whole class of tools has been developed, which will be discussed in this publication. It will be told about what to saw aerated concrete…

Read More

Concrete grinding machine with their own hands

How to make a floor grinder with your own hands Get an even, with a decorative effect, polished floor coating allows grinding concrete with special equipment. After removal of the surface layer with abrasives, the structure of the hard rock filler of decorative stone is revealed. Monolithic concrete surfaces without treatment have an unsightly appearance,…

Read More

How to cut through concrete with an angle grinder without dust

How to saw with an angle grinder without dust Sawing with an angle grinder on concrete, brick, stone or tile generates a lot of dust. In this article we will tell you how to saw with an angle grinder without dust. Dust not only contaminates the room or work area, but also has a detrimental…

Read More

Drive a nail into a concrete wall without a drill

The Secrets of Proper Nailing A nail will go perfectly into the surface, not to deform it and not to bend itself, and the hammer will not cause injury if you follow a few simple tips. If the experience in hammering nails is not so much, it will not be superfluous at first to put…

Read More

The tool for laying aerated concrete with their own hands

Special for laying aerated concrete trowel is used as a mortar dispenser. With such a hand-held tool it is easy enough to distribute the adhesive evenly over an even surface: holding the trowel by the handle to scoop out the required amount of adhesive composition; Apply the adhesive to the horizontal and vertical surface of…

Read More

How to lay aerated concrete blocks with adhesive

How to lay gas block. The secrets of masonry aerated concrete blocks with your own hands Aerated concrete is produced by businesses, private developers, and large construction companies. And they all need to know how to do the proper masonry. What all aerated concrete manufacturers have in common? Some make blocks for themselves; others make…

Read More

Can an impact drill drill drill drill into concrete?

Step by step drilling process Consider how to drill a brick wall with an ordinary drill. But the latter must necessarily have a percussion mechanism. Because without it, the tool will quickly overheat. And this is highly undesirable, as it will lead to early wear and tear. Can you drill with an impact driver? The…

Read More
| Denial of responsibility | Contacts |RSS