The lawn mower does not start the causes of the malfunction. More complex reasons for the refusal of the lawn mower

The lawn mower does not start or stalls? Many owners of gasoline lawn mowers sooner or later face technical problems of this technique. Most often, problems arise after three to four seasons of active operation of the lawn mower or after the equipment spends the winter in an unexplored garage. These problems are manifested as…

Read More

Huter lawn mower does not start the reasons pouring candles. The lawn mower is not started on a cold

Why floods the candle in a gas station? Wet sparkling candle or flooded candle is the main feature of either a non.working candle, the absence of high voltage voltage on the electrodes of the candle, or re.enrichment of the fuel mixture supplied to the operating chamber of the engine of the engine of the lawn…

Read More

Husqvarna benzotimmer’s head does not spin. Lubrication for gearbox of gasoline trimmer for grass

Why is the coil not spinning on the trimmer Semi.automatic trimmer heads are considered the most popular in the market. A typical representative of the mechanisms of this type is a universal semi.automatic head, which is equipped with electric trimmers for grass and lawn mowers such well.known brands as Bosch, Huter, Husqvarna, etc. Its device…

Read More

The electric screwdriver button does not work how to repair. How an electric screwdriver works? (Video)

What transistor costs in the control regulator of an electric screwdriver? Button of an electrical screwdriver, control element, which is responsible for several functions of the tool. Here, a small, not very important control node, combined: the power button, the switch of the rotation of the electric motor, the smooth starting device is not a…

Read More

The Chinese trimmer does not start for the grass floods the candle. Malfunctions of electric trimmers

Trimmer for grass gasoline Champion T334 does not start, wet candle. Before resorting to more serious repair actions, you must make sure that the graduation channel is serviceable. This section does not apply to previously not used trimmers, since they have practically no production. If the lawn mower is operated for many years and during…

Read More

Makita Electric mowel does not spin. Brand break

The knife stopped rotating the Elitech electric. What can be done? The knife stopped rotating when I tried to manually move with a knife-you feel some kind of pull, moves hard, the power is not enough to move the knife. Before that, there was the same problem, then I opened. there the belt flew and…

Read More

Chain saw does not twist the chain. The chain lubrication system

Does not twist the chain on the chainsaw of Husqvarna. The chain works but the chain does not spin. The final adjustment of the carburetor of the chainsaw Despite the simplicity of the construction of the chainsaw, if interruptions arose in its work, and sometimes with the complete failure of the unit, it is quite…

Read More

the electric screwdriver does not charge what to do. The battery on an electric screwdriver dies quickly

Why the battery of an electric screwdriver does not hold a charge or does not charge at all? A cordless electric screwdriver, can always be useful at home, but over time, its power source suddenly refuses to work. It is expensive to buy a new electric screwdriver. Its price consists of about 70% of the…

Read More

At what speed does a single-axle tractor travel. How to reduce the speed of a power tiller

How many kilometers per hour a single-axle tractor travels? Popular models of power tillers from domestic manufacturers have a much lower maximum speed. on average, 12 km/h at MB-2 and MB-23, Neva. Also a good speed has a single-axle tractor Mobil-K Gepard. 12 km / h (gearbox 41). The speed of a power tiller with…

Read More

What kind of deformation does the saw’s teeth experience?. The shape of the tooth of the blades on the metal

Laboratory work on wood cutting tools 5.1. Purpose of the work. To identify design elements of circular saws, learn the purpose of each element, study methods of saw teeth preparation, measure basic parameters of saws, assess their conformity to GOST and define rational area of application of a particular saw. 5.2. Job assignment. For concrete…

Read More
| Denial of responsibility | Contacts |RSS