How to make a circular saw from a coping saw

Circular saw for wood with their own hands A crosscut saw made by own hands often is not inferior to the factory one. Manufacturing with drawings of such a unit you can see below. The device of such saws is similar to circular saws. Their advantages. limited weight and dimensions. They are therefore not only…

Read More

How to make a receiver for the compressor with their own hands

A compressor from a gas cylinder with their own hands. Compressor with their own hands: installation options How to make a receiver from a propane cylinder A compressor is an indispensable thing in the household, at home. This is especially true for those who have their own workshop and like to make things or do…

Read More

How to make an impact screwdriver with your own hands

A screwdriver from an old starter. A convenient and practical impact screwdriver from a car starter Experiencing difficulty unscrewing rusted bolts? I suggest you try to make a screwdriver, which allows you to unscrew almost anything! Sometimes it is needed to unscrew bolt that is badly rusted or for example screws with ripped edges. You…

Read More

How to make a nozzle on a chainsaw angle grinder

Makeshift brush cutter attachment for chain saw Simple bush cutter attachment for chainsaw: photo and description of making a homemade. This device will greatly facilitate the process of cutting down various shrubs and bushes on the garden plot. Remove such overgrowth with a manual hacksaw is tedious and unproductive, chopping with an axe is not…

Read More

How to make a snowmobile from a power tiller with your own hands

The basics of creating all-terrain vehicles on the basis of a power tiller The question of how to make a rover from a power tiller with their own hands, is very relevant for farmers and even owners of small plots. This technique is an assistant for all occasions, since it is very easy to attach…

Read More

How to make a circular saw from a circular saw

Making a table for a circular saw with your own hands. instructions and installation Circular saw. a convenient and productive tool for construction work, with high performance and maneuverability. But when sawing large batches of lumber it is quite difficult to work with a powerful circular saw. The table for the circular saw, made by…

Read More

How to make brakes on an adapter to a power tiller

Champion chain saw adapter drawings. What is an adapter to a steerable power tiller. Once upon a time, all agricultural work was done by hand. This is extremely inefficient, because human performance is very low, and he needs to rest from time to time. But then special machines came along to help people work the…

Read More

How to make a disc tip on a single axle tractor

The disk mower for power tillers do with their own hands drawings To get a good harvest of potatoes you need to properly process the area. Previously, they used manual labor and simple equipment for tilling the land. a hoe, a rake and other implements. The use of power tillers with different attachments can significantly…

Read More

How to properly sharpen a hacksaw and make a smoothing

The secret way to sharpen your saw quickly A toothed, well-sharpened saw is not just a hand-held tool, it’s practically a violin in the hands of the craftsman. It does a great job, it does not tear or crumple the edge, and the cut is crisp and even. The secret is in the good sharpening.…

Read More

What you can make from a drill with his hands

What you can make from an old handheld drill We are part of nature. How harmonious each of us feels in the garden, in the dacha or in the homestead. Exactly mowed lawn, weedy seedbeds please our eyes. But it’s not easy to achieve such a result by hand. A aching back, grass-cut fingers can…

Read More
| Denial of responsibility | Contacts |RSS