How to remove a chuck from a Makita rotary hammer

Disassembly of the Makita 2450 Peorator Barrel Due to the ingress of dust, dirt and moisture, the internal lubricant eventually becomes hard and does not perform its purpose. Peorator begins to run with extraneous noise. When you begin repairing the peorator, be sure to read the included instructions for disassembly, lubrication, and reassembly of the…

Read More

How to remove the cylinder on a STIHL 180 chain saw

STIHL chainsaw repair manual; STIHL 180 instruction manual Before repairing the engine make sure that you are able to do it yourself, without going to the service center. If you have decided to do it, first of all disassemble the engine. To do this, unscrew the four nuts that hold the cylinder. Check the engine…

Read More

How to remove the chuck from a Bosch rotary hammer

How to remove the cartridge from the peorator Almost everyone has a drill. The tool helps to drill a hole on any surface. And therefore, it is not replaceable in construction and finishing works, any kind of repair of the room. Reliable and trouble-free operation of the device is ensured by a chuck, in which…

Read More

How to remove the bobbin from a grass trimmer. Replacement instructions – how to insert the trimmer line

Repair the grass trimmer spool with your own hands In this article, we will describe in detail the procedure of how to remove the grass trimmer spool. The step-by-step instructions with the attached video will help a beginner and an experienced user to remove the element of the system and clean it or replace it…

Read More

How to remove a chuck from a Makita rotary hammer

Disassembling a Makita 2450 Peorator Barrel Dust, dirt and moisture can make the internal lubricant eventually become hard and does not do what it is supposed to do. Clutch starts to operate with an unusual noise. When you begin repairing your peorator, be sure to read the included instructions for disassembly, lubrication, and assembly of…

Read More

How to remove the chuck from a Hitachi electric screwdriver

How to disassemble the chuck on the electric screwdriver. detailed instructions An electric screwdriver is a tool that is often used in the home. The device consists of different parts that have to be removed and replaced as needed. The question of how to remove the chuck from an electric screwdriver, is quite relevant, especially…

Read More

How to Remove a Sprocket from a Husqvarna Gasoline Saw

How to Remove and Replace a Sprocket on a Gasoline-Powered Saw Chainsaws made by renowned manufacturers of special tools are characterized by high reliability and long service life. This is due to the well-thought-out design and the use of special grades of tool steel, of which all moving and rubbing parts are made. These include,…

Read More

How to remove the carburetor from a Husqvarna 135 chain saw

Adjusting the carburetor on a Husqvarna 135 chain saw The best advice I can give you is to call in a specialist! Trust me when I tell you that they will adjust the carburetor and check the condition of the saw. If you still need to adjust the carburetor on the Husqvarna 137 without assistance,…

Read More

How to remove the gas tank with a Chinese chain saw

How to remove the gas tank on a chainsaw The effectiveness of any tool depends on following the rules of its use. Start in the first place. Do it in this order: Engage the chain brake, for which it must be applied in a forward direction. Remove the protective screen, if fitted. Turn on the…

Read More

The nozzle on the electric screwdriver to remove the paint

Remove old paint from the walls quickly will help the nozzle on the drill with his hands When we ordered the repair of the bathroom and toilet latrine, cloakroom. closet. closet). a room for the performance of natural needs (urination, defecation and antiperistalsis) in khrushchevka, then the workers were faced with a difficult problem. Removing…

Read More
| Denial of responsibility | Contacts |RSS