How to unscrew the clutch on a chainsaw.

Removing and replacing the clutch of the chainsaw Types of malfunctions do not depend on the chainsaw model, since the structure and principle of the clutch operation is the same on almost all modern power units. Chainsaw operators know that a slight problem from this node requires immediate active actions. The breakdowns are inevitable, since…

Read More

How to unscrew the head of a trimmer for grass.

Do.It.Yourself electrimmer repair: detailed instructions for a novice master with pictures, schemes and photos A mowing string head is one of the types of executive mechanism of a garden trimmer for grass. It is intended for mowing grass and constructively represents a special coil (bobin) from which a cutting cord (string, fishing line for a…

Read More

How to unscrew a Phillips screw without a screwdriver

What can be used instead of a very small screwdriver? Another option is to use a toothbrush. Melt one end of it with a lighter, then immediately insert it into the recess on the screw head. After waiting a little to allow the melted plastic to solidify, turn the brush counterclockwise. Of course it doesn’t…

Read More

How to unscrew the spool from a grass trimmer

Repair of electric trimmer with their own hands: detailed instructions for the novice master with pictures, diagrams and photos Mowing string head. this is one of the types of the executive mechanism of the garden trimmer for grass. It is designed for mowing grass, and structurally it represents a special spool (reel) of cutting cord…

Read More

How to unscrew the nut on an angle grinder without a wrench

What are some ways to unscrew a tightened nut on an angle grinder? When rotating at idle, it is difficult to encounter a similar problem. Especially when working with light circles and tools with soft start function. However, after increasing the RPM and making contact with the surface to be cut, the following happens: When…

Read More

How to unscrew the disc on an angle grinder without a wrench

How to change a disc on an angle grinder with a key? Use a drill or a keyless angle grinder to turn the blade on the angle grinder without the key, first switch it to jackhammer mode. As a working tool, a suitable auger is used, most often 6 millimeters. To begin with, let’s answer…

Read More

How to unscrew the disk on the circular saw

How to hand sharpen a disk with a file Hand files are seldom used to sharpen pobedite tips. It is inefficient, and it is very difficult to maintain the angle of the cutting edge during manual cutting. But for sharpening steel saws it is quite suitable. Sharpening is carried out after the teeth have been…

Read More

How to unscrew a stuck screwdriver bolt

How to loosen the different types? The main difference between the different types of screw fasteners is the type of their slots and the shape of their flats. Rules of unscrewing are also different, because in each case, you need to act according to the peculiarities of the metalware: Straight. Both large and very small…

Read More

How to unscrew a small screw without a screwdriver

Yes, a hammer can be used to set a screw into drywall or gypsum, for example. However, the threads of the screw are likely to rip a hole large enough that the screw will just pop back out again! Its best to hammer in a nail thats slightly smaller than the screw first, remove the…

Read More

How to unscrew a small screw if you do not have a screwdriver

How to unscrew the different types? The main difference between the different types of screw fasteners is in the types of their slits and the shape of their heads. Rules for unscrewing also differ, because in each case to act in accordance with the peculiarities of metalware: Straight. Both large and very small can easily…

Read More
| Denial of responsibility | Contacts |RSS