The nozzle on the electric screwdriver to remove the paint
Remove old paint from the walls quickly will help the nozzle on the drill with his hands
When we ordered the repair of the bathroom and toilet latrine, cloakroom. closet. closet). a room for the performance of natural needs (urination, defecation and antiperistalsis) in khrushchevka, then the workers were faced with a difficult problem. Removing old stained paint is the common name for a group of colored dyes intended for direct use in some area of the home on concrete walls is not an easy thing.
It used to be commonplace to paint walls with oil paint not only in the bathroom and toilet, but also in the kitchen. In the kitchen, we made repairs ourselves and did not remove the paint, but simply cleaned the dust and glued washable wallpaper type of construction finishing materials for lining walls and ceilings indoors. Wallpaper is still holding up (it’s been 4 years).
See how it was not easy to repair a complex of measures to restore the working or serviceable condition of an object and / or to restore its resource in the bathroom, bathing or taking medical procedures and the toilet.
Paint can be removed with an axe, spatula. But the process can drag on for a long time. The result is a headache of noise not only for the owners, those who make repairs, but also for the neighbors.
How to speed up the process and clean the walls from paint faster? There is a good way to do it.
This category of discs is designed for rough work on metal. A sharpening disc can be used for deburring weld seams, chamfering cut parts or for sharpening tools (drills, chisels, etc.).д.) if there is no sharpening machine nearby.
It is worth knowing that when installing such a disc, the speed on the angle grinder should be set to a minimum or not exceeding the value specified on the abrasive disc.
Sharpening discs are commonly used on small angle grinders, because they are more suitable for deburring metal.
A sharpening wheel can be distinguished from a cutting wheel by its thickness (min. 5 mm) and by the presence of a depression in the center for easier use of the wheel surface for sharpening tools.
Removing paint mechanically is the easiest and most technically feasible way to remove old paint. To remove paint you can use a wide arsenal of technical means. For example, you can work with a paint scraper.
Advantages and disadvantages of grinding tools
Despite the abundance of solutions, such devices are auxiliary and are not suitable for specific tasks. One of the main disadvantages. the weight of the drill. It is difficult to hold a heavy tool on outstretched arms or above the head. Because of this, the surface finish suffers in quality and duration.
But in the cases where high accuracy is not required, like scraping materials or walls, this point is not critical. In a word, the sanding nozzle for a drill. a domestic device, not pretending to professional level.
The clear advantage of the tandem of drill and bit is cheapness with affordability. Spending a few hundred can get you more than adequate return for your home needs. While the purchase of professional equipment will cost a pretty penny. And it is not a fact that you will need the tool after the necessary work has been done.
Instructions for removing the putty
Before you remove the putty from a wall, make sure you have the right tools for the job. You need to prepare:
If this set does not help, properly remove the old layer, you may need heavier electrical equipment:
You will also need special spatula or picks for the paint sprayer. Use special diamond discs when working with an angle grinder.
Observe safety rules when working with the nozzle:
- Wear safety glasses, a respirator, and gloves. It is desirable not to leave exposed skin on your hands.
- Use only suitable electrical equipment, to avoid tool breakage.
- If possible, turn off the power in the room where the dismantling work will be carried out. There are often exposed wires underneath a layer of paint. In this case, there is a great risk of tearing the cable.
The paint stripper handles not only the polymer layer, but also tile and wallpaper adhesive residue. Also suitable for removing minor concrete stains and plaster residues on walls, which helps prepare the surface for subsequent treatments.
This tool is a patented accessory, which confirms its efficiency and practicality. It is equally suitable for processing walls, floors and other surfaces, making it an indispensable assistant in the repair.
Peorator chisels and what they do
Structurally, a bit called a chisel on a peorator is no different from a locksmith’s tool. The main difference is the presence of the shank and the elongated shape of the working part. The main purpose of such a device is to chip off concrete, brick, cinder block. The sharp part of the chisel dulls during use, so it must be sharpened on an emery wheel.
The chisel is also used to remove plaster and tile from the wall, as well as ceramic tile from the floor. Chisels have different thickness of the working part, as well as the length, which positively affects the convenience of working with the tool with such attachments. The most popular tools are chisels with a working length of 25 cm and a thickness of 20 mm. They are available for peorators with sds max and sds plus chucks.
How to clean the paint from the bathroom wall with your hands
Ways to clean bathroom walls from paint, a practical guide. Analysis of the situation, methods, recommendations on the choice of tools, description of the technology of paint stripping.
The task of cleaning bathroom walls from paint is not as easy as it may seem at first glance. For those doing it for the first time, the wrong approach to this task turns cleaning the wall surface into an extremely time-consuming and inefficient process. Work on the dismantling, contrary to popular opinion, also requires certain skills, special training and considerable effort.
In domestic conditions there are two ways to scrape paint from the walls of the bathroom: chemical and mechanical. The chemical method is to use special construction cleaners, which are produced in sufficient quantities by both foreign and domestic manufacturers. Such a flush can do an excellent job on metal substrates, good on wooden substrates, but rather mediocre results on wall materials.
Paint removers for removing paint from bathroom walls are not widespread in the home. However, do not completely “discount” this method of cleaning. It can help you in places where access is limited, where using hand tools is difficult. Compound is applied on a surface by means of a brush. After a few minutes, the paint will begin to change into a jelly-like state. To remove it, all you need is an ordinary spatula. You do not need to apply great force. If you are dealing with a wall that has multiple coats of paint, you will need to repeat the process.
Mechanical cleaning of walls. theory and practice
For mechanical cleaning of bathroom walls from paint use a manual primitive tool or power tool. Primitive hand tools make sense if the paint coating is in poor condition, which is expressed in the presence of swellings, cracks or its flaking. In this case, you will be helped:
- a scraper to remove decorative coatings;
- A planer blade;
- Any tool at hand with a wide, sharp edge.
The scraper is the least suitable of these tools, because it strips paint thinly and dulls quickly. Scraper for removing decorative coatings you can easily buy in a construction store, it is inexpensive.
In addition to the condition of the paint coating, the presence, thickness and condition of the putty underneath is an important parameter when choosing a tool. A layer of unprimed gypsum putty is relatively easy to peel off the wall with the paint. If before painting the wall was well primed, and the putty layer was saturated with primer completely, then the effective use of primitive hand tools, most likely, will be impossible.
The worst case is when the paint is applied to a concrete base or a well-done cement-sand plaster, where the putty layer is minimal. It is very difficult to clean such a surface. In this case, don’t even think about using primitive tools. This is a huge effort with minimal results. Arm yourself with a power tool.
Remove paint with a drill
In order to remove a layer of paint from the wall you can use the following power tools:
In order to remove paint from the bathroom walls with a drill you will need a device that was invented by craftsmen and entered into use relatively recently. This tool does not have an official name. It is a metal rod with three chains of several links attached at equal angular intervals at the end of it. The other end of the rod is fixed in the drill chuck.
Paint remover attachment for the drill
After installing the attachment and turning on the drill, you unscrew the chains, thus bringing the device into working condition. We get something similar to a propeller, but with flexible blades. These “blades” are the working part of the tool. A series of hard and consistent strokes will knock the paint off the wall. A minimum of muscle effort and an acceptable result. The device is tested, found quite effective and adopted by master builders.
Be careful! The chain links fray during use. If you don’t remove a worn link in time, it will come off in the process. Always protect your face. Anything that can break must be taken out of the room or protected. You can’t remove a link from only one chain. All chains must have the same number of links on all chains, otherwise the balance will be upset and you won’t be able to work with the tool.
Remove paint with a drill from the wall with a warranty
If a painted surface is in the worst condition described above for removing a paint layer, the chain attachment may not be effective. In this case, use a different variant. A large-diameter through-hole brick cutter can do the job. Correct force rating of the force is important. The bit should peel away the top layer, but do not go deeper, so you can drive the drill along the surface.
Naturally the larger the diameter of the tip, the faster you can clean the wall surface. Because of the high rotation speed and the principle of the tip itself, be prepared for the formation of dust. Protect your eyes and respiratory organs. This method is effective, fast enough and has a good final result.
Clean the walls with a peorator
Peorator offers as many as three ways to remove paint from the walls in the bathroom. In the most difficult situation, just as with a drill, the brick or concrete core bit will help you. The working principle is the same. If you do not have a crown, you can use the blade that comes standard with the peorator.
Cleaning a wall with a peorator
Hold the peorator at right angles to the wall. Dose effort and speed. The blows must be strong, but superficial, so that you can move the tool. Do not be discouraged if at first you are unsuccessful. The main thing is to “catch the wave”, show persistence and very soon you will acquire the necessary skill. A peorator will easily break up a layer of fossilized putty or multiple layers of paint. This method is practiced by a large number of craftsmen.
Types of tools
Mechanical cleaning can be done with two types of tools: manual and electric.
The power tool, especially an angle grinder (sander) or peorator, has the greatest effect. Both tools can be equipped with several types of nozzles, which include:
Below we will tell in detail about the peculiarities of the use of some types of tools.